(0xc0000005) error message on iexplore.exe
I had this error message on IE8. I upgraded to IE 11 and still get the same message.
How do I get rid of it as I cannot even start IE.
Here is the forum for you.
Similar Messages
-
I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?
-
When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
I am getting an error message Aps Daemon exe system error 1cud49dll...what can I do to fix this???
I am getting an error message Aps Daemon exe system error 1cud49dll. I cannot reinstall itunes...help please!!!
See Troubleshooting issues with iTunes for Windows updates for tips on repairing the iTunes installation.
tt2 -
I am now getting an error message from Elementsautoanalyzer.exe, extendscript.dll not found. reinstalling the application may fix this problem. is there a fix for this?
TomCT60,
Is your MacBook using Mac OS X 10.6.8 as indicated in your post? If so you will not be able to fully integrate with iCloud.
iCloud and Snow Leopard, by Roger Wilmut describes what iCloud options are available for Snow Leopard.
If you are using Lion, go to iCal>Preferences...>Accounts, and delete/re-add your iCloud CalDAV server. -
When sending an email through windows live I get an error message from WebKit2WebProcess.exe
Hi,
Every time when I try and send an email from windows live I get an error message from WebKit2WebProcess.exe.
Not sure if I deactivate this from Windows live whether I will compromise my security.
Any advice would be helpful.
Thanks,
BeckyThank you Matt. I'm sure this will be frustrating ...but the more I think about this problem there more info I have to share. The emails I write that do not get sent do end up in my "sent" folder but never reach the recipient. And, most perplexing, the issue/problem is sporadic. It was coming and going before I switched over to the SSL/TLS option in T-bird. And...since the switch it has reappeared and disappeared. I have made zero changes other than the above mentioned. I did get a security update today for T-bird perhaps this will help?
I read your link, thank you.
I obviously don't understand how these systems work. I'm baffled how an issue like this can come and go... -
Flash Player error message when starting .exe
I have published a quiz on our local intranet in .exe format.
It runs fine and actually submits results (unlike the .swf files)
via Outlook. I created the quiz on a Windows XP machine running
Captivate 2.
The only problem I am finding is with certain machines, when
they go to run the quiz, they get a FlashPlayer error message that
says : "Cannot create file C:\DOCUME~1\iddem\LOCALS~1\Temp\Personal
Care final.swf" . On other machines, I don't see the message at
all.
If they click OK, it runs the quiz fine. My question is
whether there is a setting in Captivate I can change to avoid
having users see this message.
Thanks for any help you can provide -
Anne GoldenbergerI don't know for sure, but believe an .exe is (supposed to
be) the Flash
Player and the .swf file essentially 'zipped' up into an
.exe. So when
you open the .exe, it auto-extracts to the user's temp folder
and the
swf is told to play using the bundled Flash player.
HOWEVER, recent posts indicate at least some of that is not
true, or not
working as it should, in that if a user doesn't have the
Flash player
installed, the .exe won't work (swf doesn't play). So perhaps
the issue,
assuming my previous assumption is true, is the .exe is
supposed to make
the Flash player available but is not, or is directing the
swf to use
the installed player instead...which fails if the player is
not
installed....
SO, point being if that's all true, that's why the user's
temp folder
may be coming into play - the .exe is trying to extract to
that
location. Is the folder path different for each user -
showing their
username in the temp folder location?
Why the error is occurring or how to fix it, I'm not sure.
Emptying the
user's temp folder sounds valid. Maybe it's just too 'full'
and hitting
some quota limit? Or perhaps the temp folders have some sort
of
permissions restriction (which would be silly)?
At least the file works despite the error...
Erik
Anne L Goldenberger wrote:
> Thanks for your response Larry. What really seems
strange to me is that the
> error message comes from Flash - which seems really odd
since what I published
> was an .exe file - NOT a .swf file. When the .exe runs,
maybe it is trying to
> 'create' a .swf file???
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware -
Equium A60: I get error message using explorer.exe
Everytime I try to open an image file using Paint or Fax/Image viewer, or I try to drag a file into a folder I get the following error message:
"Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience"
The error report says:
"AppName: explorer.exe AppVer: 6.0.2900.2180 ModName: rpcrt4.dll
ModVer: 5.1.2600.2180 Offset: 000847a6"
Also I cannot open webpages that open in new IE windows. Norton Internet Security 2005 also would not open, but did claim to be active in the background.
Does anyone have any advice for me?
I've tried all the help for explorer.exe problems on helpwithwindows.com but nothing they suggested worked - such as spyware, malaware removal. I've run a few online virus checks - since Norton won't work I had to try the online scans.
The laptop was bought last year, and we've lost the recovery CDs - so if we need them, then where can we get replacements?
Many thanks,
JonathanHi
Well, this sound like a OS software malfunction. It's possible that some registry entries or/and data files are corrupted and damage.
However, the best solution is to recover the OS.
The other possibility is to use the "system restore" tool of Win XP.
Then you can try to roll back the OS to the early point. But if it doesnt work so the new installation is needed.
regards -
I have attempted to download the latest version of Fx. I get the message "pSVzV7gx.exe.part can't be downloaded because the source file could not be read".
Hey,
Thanks for your response. I've checked in the about itunes and it says the MacBook's itunes details are as follows
11.05.5 (5)
64 bit
copyright 2000-2013
I imagine the iMac has the lates itunes on it although I cannot check because it brings up the error message as described above. Any help will be appreciated.
AJ -
I keep getting this error message every time I open certain sites such as Facebook, Wayfair, etc. I have uninstalled Flash many times and re-installed it many times but keep getting this message.
I had the same problem.
I went through the troubleshoot and it's not the extensions etc.
The Adobe Flash Player Plugin version 11.9.900.117 seems to be the problem.
Flash still plays fine, just the pop-up happens and not sure why.
If it's annoying you, try installing the older version:
Uninstal this version (v11.9), and re-install the older version (v11.8)
You can find older versions on :
''http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html''
To test this, I installed this version :
''(Released 9/10/2013) Flash Player 11.8.800.168 (156.2 MB)''
It downloads a zip file, which contains 7 files, I ran the file :
''flashplayer11_8r800_168_win.exe''
And now the pop-up does not happen.
==================================================
Note 1: I did this:
:1: uninstall v11.9
:2: open firefox (so I'm opening up firefox without flash)
:3: go to youtube = a popup to install flash appears, click to install
The version it offered was not 11.9, but 11.8 : strange! why not v11.9?
: anyway, if you try to install v11.8 this way, it always fails
==================================================
Note 2:
This problem only happens on my main home desktop and does not happen on my other machines (which all are Firefox Sync-ed, so all running same extensions etc...)
Strange!
================================================== -
Getting Virtual Function Call runtime error R6025 from iexplore.exe
Hi all,
I am getting an virtual function call runtime error from iexplore.exe. The IE will then crash. I have checked the log in java console. It shows
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter@4607b5
basic: Finding information ...
basic: Releasing classloader: sun.plugin.ClassLoaderInfo@314585, refcount=3
basic: Done ...
basic: Joining applet thread ...
basic: Destroying applet ...
basic: Disposing applet ...
basic: Quiting applet ...
basic: Joined applet thread ...
basic: Unregistered modality listener
--> basic: Stopping applet ...
--> basic: Stopping applet ...
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter@cbb7db
basic: Finding information ...
basic: Releasing classloader: sun.plugin.ClassLoaderInfo@314585, refcount=2
basic: Done ...
basic: Joining applet thread ...
basic: Destroying applet ...
basic: Disposing applet ...
basic: Quiting applet ...
basic: Joined applet thread ...
basic: Unregistered modality listener
I have implemented the stop() in all the applet classes. However, I do not know where this stop() called?
Also, from the java debugger, it always stops and shows:
Exception occurred: java.lang.ThreadDeath (uncaught)"thread=TimerQueue", javax.s
wing.TimerQueue.run(), line=-1 bci=63
TimerQueue[1] cont
>
Exception occurred: java.lang.Exception (uncaught)"thread=main", sun.plugin.com.
JavaClass.getIdForName(), line=-1 bci=72
main[1] cont
>
Exception occurred: java.lang.Exception (uncaught)"thread=main", sun.plugin.com.
JavaClass.getIdForName(), line=-1 bci=72
main[1] cont
>
Exception occurred: java.lang.Exception (uncaught)"thread=main", sun.plugin.com.
JavaClass.getIdForName(), line=-1 bci=72
main[1] cont
>What version of 5.0 are you running? There were some problems new in 5.0 seen mainly with the Java Plug-In and other apps which embed the JVM which were fixed in 5.0u6.
-
Occasional error message saying "Labview.exe has stopped working"
Hi,
I am using Labview 8.0 on a Windows Vista operating system to communicate with lab instruments through GPIB. Occasionally, when one of my programs finishes running, an error message appears saying "Labview.exe has stopped working". The error window gives me the option to close the program or debug. After clicking debug, Windows cannot find the source of the error and the all labview applications get closed. Any ideas? Thanks.The code that I have been having an issue with is attached. The main program is called "Frequency Sweep Real Time2". The other two attachments are subVI's used within the main program. I am a young programmer and I have never had any official training with Labview so sorry if my Labview programming is unconventional or just plain bad. Thanks to whoever looks this over.
-Ryan
Attachments:
Frequency Sweep Real Time2.vi 443 KB
Read multiple values.vi 26 KB
Save_data2.vi 22 KB -
That's the error message I'm getting. I keep troubleshooting my computer, and trying to troubleshoot iTunes and it's not working or coming up with anything.
I just used my iTunes yesterday and it was working fine, all I did was try to update it today and then this happened.
Now I can't even open iTunes...
Please help!Click here and follow the instructions.
(99033) -
I tried to open my CS6 and received an error message that said Adobe needs to close. I have not been able to get it to open. I even re-booted my computer. Any suggestions?
Sorry, but that's totally useless. you have not provided any system info or other technical details. Kernel errors are driver or security issues on your system more than anything else and without more detailed info nobody can even begin to guess.
Mylenium -
Ghost32 image on my X61s = error message with winload.exe and 0xc000000f
hi
scuse my poor english.
i have a deployment to do with 200 notebooks : r61 & x61s.
i create a WDS server with a boot.wim and a Ghost Solution Suite Server 2.5 with images of R61 & X61s on the same server 2003.
i start my R61, boot on the F12, start WinPE, install the ghost image through the network, reboot the notebook and vista run normally, good.
i start my X61s, boot on the F12, start WinPE, install the ghost image through the network, reboot the notebooks and i have a BOSD, a reboot, and this message : Windows\System32\winload.exe is crupt or missing, Status error : 0xc000000f.
i try to repair with the vista dvd, bcdedit, /fixboot, /fixmbr, /rebuildbcd,... : same error
i try with a new ghost image, same BOSD and error
i try to install the ghost image since a USB hard disk, same BOSD and error
perhaps there is a problem with the hardware of X61s ?
thanks a lot for your responses !
Message Edited by freenod on 08-21-2008 01:26 PM
Message Edited by freenod on 08-21-2008 01:26 PM
Message Edited by freenod on 08-22-2008 07:15 AMthanks for your response.
i have to do a deployment with 200 notebooks for a Business School.
the administrator of the Business School use a Vista Business OEM version for all the notebooks, R61 and X61s.
they give to me a R61 and a x61s with Vista and a lot of softs installed.
my job is to clone this two models and deploy the ghost image on the 198 others R61 and X61s :]
on the disk there is two partitions : in first one IBM partition hidden, in second one Vista partition.
i clone the entire disk of R61 with ghost solution suite 2.5 and my clone works perfectly with the R61.
i clone the entire disk of X61s with ghost solution suite 2.5 and my clone give me a BSOD and a reboot.
have you an idea ?
thanks
Message Edited by freenod on 08-22-2008 07:16 AM
Maybe you are looking for
-
Hi I followed the plumtree enterprise dev tutorial on the plumtree site on multiple branding using different url host headers, using custom activity spaces and PEI, making calls when login action events are triggered. It works for the most part, exce
-
I'm using a Macbook Pro and running the CS3 Creative Suite. When I save a swatch and try to view it in Bridge, it only shows the .ASE icon, not the colors. There are a few swatches that show up as the colors when I try to view them in bridge but as f
-
Removing unneeded configuration files from project (in configuration folder)
Last week, I took the LabView basics I and II class. During the class, I created a project with a pre-existing vi of mine (that I had previously written). When I arrived back at work, I load the vi and the vi is looking for configure waveform.vi, c
-
I am trying to burn music videos onto a dvd disc and I keep getting error code 4450. It has something to do with the format. Anyone know what this is?
-
Dear All, i am very new in Oracle, so may be you can help me. We have some 'very' big views here. So when i look with the Schema Manager i see only a littel part of this view. I have tryed to change or copy this view, but oracle tells me that the vie