0xc000025 - Trying Recovery System via Recovery Manager: Windows failed to start.

Name: Pavilion dv4-2161nr
Prod. Number: WA691UA#ABA
Windows 7 64-bit
I splitted original Hard Disk Partition in three partitions. I formatted those two not containing O.S. Now I want to format the partition containing the O.S.
1) If I choose "Recovery System", will it format all three partitions? Or will it format the partition I choose to?
2) I tryed "Recovery System", but it failed. What can I do?
     2.1) I made Recovery DVDs when first used the PC. It loads but it never runs. It's like theres no AutoRun, and there's no ".exe" to execute when I open the first DVD Recovery via Windows Explorer. What am I missing?
     2.2) I tryed Recovery System via Recovery Manager. System shuts down and starts reiniciating but it gives the following message "Windows Boot Manger: Windows failed to start. A recent hardware of software change might be the problem. Status: 0xc000025. The boot selection failed because a required device is inacessible". What can I do?
     Regards,
     Rafael.

I tested the Hard Drive and it passed 100% ok.
I tested the Memory and it passed 100% ok.
My PC runs a Win 7 Home Premium.
I've just run a Win 7 Ultimate CD Installation. It formatted the System Partition, but I couldn't get Win 7 installed because when I filled in my Product Key it said the Product Key wasn't right. Is it because Product Key for Win 7 Home Premium wouldn't work on a Win 7 Ultimate installation?
I hoped the Hard Drive would be ok after it had been formatted while I tryed Win 7 Ultimate installation. So I tryed once again to boot with HP Recovery Disc. It stopped at 23% once again. Until 23% there are all noises that get me thinking PC is running ok. When it get up to 23% all noises just stop.
Any ideias?
And thanks once again.
Rafael.

Similar Messages

F11 Recovery don`t work - error Windows failed to start

After downloading MS updates don`t work administrator password. I try F11 Recovery and see black screen: windows failed to start. A recent hardware or software change might be the cause ...
File: \windows\system32\winload.efi
status: 0x0000001
Info: The application or operating system couldn't be loaded because a required is missing or contains errors.
?Any ideas?
This question was solved.
View Solution.

1) Maybe I misunderstood something, but I thought that the function f11 restores preinstalled Windows from the hidden partition on the disk.
2) I created a boot disk with Windows 8 Pro on USB and tried to boot from it through Boot manager. Beyond the first installation screen did not go.
3) As for your advice to contact the dealer, so I did yesterday. The tablet was taken away for examination by 20 days...
It's very sad, it was a gift to my father for Christmas.
I work for a long time as the system administrator and am dealing with HP servers. It is a pity that such a reputable company can not provide the quality of their tablets.
I advised my daughter Windows tablet, but she wished to have iPad. Now I see that she was right - a year she has no problems with it. Windows tablet - this is not the best choice for a child or an old man.

After restore windows boot manager says windows failed to start. CQ57 notebook

Had a problem with the FBI scareware. Took it to a cmputer repair place. They wanted $250 to fix it and now it won't boot up at all. It did the HP system restore but when it rebooted the Windows Boot Manager says "Windows failed to start". It wants an installation disc. THen :
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configuration data.
Is it trying to boot from the wrong partition?

Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hdd.
If you haven't burned a Recovery Disk set, phone HP to order one.Usually around $17. Choose your country here>> Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

I have Hyper-v running on Dell Precision T3600 with Windows 8 OS. I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start. (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off. The BIOS has virtualization enable. Help!!! driving me nuts for a week now.
Nick :(

Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick

Windows Failed To Start

Hi,
I own a Lenovo Ideacentre All-in-one A700. OS is Windows 7 64 Bit. Recently I did a bluetooth software update which got stuck in between and I restarted the system. Ever since that, I get a message from Windows Boot Manager saying "Windows failed to start. A recent hardware or software change might be the cause.
To fix the problem:
1. Insert your Windows installation disc and restart the computer.
2. Choose your language settings and click next.
3. Click "repair your computer"
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible.
I do not have the OS CD nor have I created the system restore disks. What I do have is the backup of all my data in drive D. Now, when I contacted lenovo through e-mail, they asked me to use One Key Recovery (OKR) and repair my system. I tried using that but then when I tried to take the backup of my files I get a message saying "The Image file is not valid." I did a bit of research in lenovo forums and found out that those whose OKR version is older than 7 face this issue. I checked up my OKR version and found it to be 3.
Here is the link : http://consumersupport.lenovo.com/hk/en/HintsandTips/hints_show_13263616724030.html
I have tried all the other options to load my OS including safe mode, safe mode with command prompt and last known good configuration but it comes back to the same screen. I am also unable to update my OKR to the latest version. I have a lot of important files located in my system. Now, can someone please help/guide me as to what I should do in order to use the backup created already in D drive and restore my system.
Thanks for all the Help !!

Well sorry to say this, but if you look that error up in Microsoft or a internet search it means the HDD is bad.
The only thing I can recommend is to try and take the HDD out and pull the Data from another PC or boot Linux and see if you can copy your Data that way.
Hopefully you can still save your data.
Good luck.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Windows failed to start: Insert Windows installtion disk?

Satellite A205-S5843
Windows Update the night before. Next day, the browser was stalling. Eventually Task Manager reported Web Site Browser was not running. I closed down all programs and hit Restart. At the restart all that came on was a small image like when an image is loading. It continued for 20 minutes. None of the buttons would do anything, not even the power button or escape button. I finally unplugged the machine. Now when I turn on the power, I get the following message...
=============
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disk and restart your computer.
2. Choose language settings. Click next.
3. Click "Repair your computer"
file: \Boot\BCD
Status: 0xc0000001
Info: An error occurred whi;e attempting to read the boot configuration data.
============
Things I have tried:
Disks. I do not have the Windows disk. The recovery disk I made and filed when I purchased the machine gave the same error.
Various button combinations. F8 key + power button. 0 (zero) key + power button. F2 and F12 are the only buttons I can access. I tried Reset to Defaults. Same results on power start.
Any feedback would be appreciated.
Solved!
Go to Solution.

Recovering to the factory default setup, and rebuilding from there, while not always necessary, is still a good thing every now and then, especially if your system has become quite messed up or corrupted.
I am glad you were able to work it out with your Toshiba Recovery disks. In double checking your specs, it would seem your system never came with the Recovery Partition on your hard drive. Otherwise, there would have been the Toshiba Recovery Media Creator program listed on your pre-installed software, which it is not. So, keep those Recovery Disks safe, and maybe think of making disk copies of each to have a spare.
See these instructions to aid in the upgrade to Windows 7, if any problems persist try the Toshiba Windows 7 Software Installer
How to upgrade to Windows 7 with the Toshiba Upgrade Assistant
Toshiba tools to simplify the Windows 7 installation process (Toshiba Upgrade Assistant for Win7 and Toshiba Win7 Software Installer)
You are very welcome. And, thank you for letting us know what worked. We very much appreicate it when people get back to us, as most do not.
Let us know how it all turns out. Good luck.
Mike

Windows Failed To Start (Windows 7)

I am not 100% sure where to post this, but I saw a similar post here, but not with the exact problem.
My spouse was playing a video game on the laptop when it suddenly shut down and when he rebooted the computer it gave him the error "Windows Failed to Start. A recent hardware or software chage might have caused the issue after you install Windows Updates." Well the two options we have are the repair function and to start windows normally. The repair funtion said the memory was fine, but we could not do anything else with the repair.
We tried pressing F8 to get the computer in safe mode, but when you click on safe mode you go right back to the error screen.
When pressing F11 to try a system recovery, it also goes right back to the error screen.
We do not have the original windows disk to try a repair that way since the computer was given to us by a family member and the disks were not included.
Any help or advise will be greatly appreciated.

Where did you see version is Vista? Some models that I have seen have Vista listed in BIOS-but actually have Windows 7 installed.
Can you check the COA label wih license key attached to bottom of laptop & let us know if the version is Vista or Windows 7.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

WIndows failed to start. (0xc0000225); cannot run Safe Mode and no install disc

Hello,
I am currently having a huge problem where my computer is stuck on "Windows failed to start. A recent hardware or software change might be the case. To fix the problem:..." (SEE IMAGE)
I have tried finding solutions online but none have worked. My computer DOES NOT go to safe mode if I press F8 nor do I have an 'installation disc'. In fact, I tried the recovery discs from my brother's laptop and the computer doesn't even recognize that they're
in the disc tray.
My computer is an Acer Aspire M3470 running Windows 7 Home Prem OA.
If it helps, this occurred when I tried running Spybot S&D due to Malwarebytes refusing to start up (pretty sure I had a virus of some sort).
The other image is what shows before the error screen; pressing CTRL-F does nothing.
Thank you in advance!

I have obtained an installation ISO and put it on both a disc and USB but neither work. I get a blue screen with the following text and cannot proceed no matter what I press:
"RECOVERY You pc needs to be repaired. The application or operating system could not be uploaded because a required file is missing or contains errors...
File:\WINDOWS\system32\winload.efi Error code: 0xc0000225
You'll need to use the recovery tools on your installation media. If you don't have any installation media, contact your system administrator or PC manufacturer.

Windows failed to start, please insert windows disk

Hello,
I have a HP envy 17 3d,
When I turn my laptop on it says the following.
Windows failed to start, a recent hardware or software change might be the problem.
\Boot\BCD
0XC/000000f
An error occurred whilst trying to read the boot configuration data.
I don't have a windows disk but a computer repair guy is bringing one over later. I just wanted to make sure I know everything I need to know, I want to avoid loosing any data!
Thank you
Erin

The BCD store can be recovered by someone who knows what they are doing.
If you have a usb HP recovery flash drive you can access Windows startup repair.
There is aslo a utility called EasyBCD that will allow you to repair an issue like this easily as well.
BTW it always helps if you state which operating system is installed. That way we can be on the same page. Since the error is BCD then I already know that it is a Windows & or Windows 8 (.1) OS, but it helps us to know for certain.
The tutorial on the following web page shows what the computer guy is likely to do to resolve the issue if your notebook has a MBR formatted disk.
http://think-like-a-computer.com/2012/04/17/boot-bcd-0xc000000f-windows-7/
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Windows failed to start. Required device inaccessible.

Windows failed to start. A recent hardware or software change could be the cause. The boot selection failed because a required device is inaccessible . Both hard disk and memory test passed. Please let me know what can be done. I think it's battery issue because it says battery problem but even if I remove the battery it's not going to windows home screen. Also tried I'm safe mode, did not work.

Hi @San16,
Welcome to the HP Forums!
It is a great place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that when you start your notebook you are seeing " The boot selection failed because a required device is inaccessible"
Here is a link to HP Notebook PCs - Resolve Boot Device Not Found Error Message (Windows 8, 7). As you have already tested the hard drive and memory you can omit that step.
If a recovery should be required, you will have an opportunity to backup your personal files to prevent data loss during that process. The link for the recovery process is in the document provided.
Here is a link to HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7) should it be needed.
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Windows failed to start. winload.exe corrupt

Been having a few problems with my Equius so decided to boot, do F8, and do a toshiba system restore.
Started up, and began formatting the disk. All of a sudden it blue screened.
Trouble is now I cant even boot that far to get the recovery/restore option. I get :-
Windows failed to start. A recent hardware or software change might be the
cause. . .
File: \Windows\system32\winload.exe
Status:0xc000000f
Info: The selected entry could not be loaded because the application is
missing or corrupt.
Not sure how it all works but I assume the recovery stuff is stored on a separate partition. Trouble is I guess you need to be able to start to load windows before you can even get to this?
I've downloaded and tried a vista boot recovery disk with no joy, and of course, toshiba dont supply a vista disk. How on earth do I recover from this situation?

Hello
At first I must say that I cannot understand why you didnt write which Equium do you have exactly?
Such info is always good for better understanding and discussion.
So, if recovery media was not delivered I think you have newest notebook model. Recovery media is not delivered with new notebooks and it must be created using preinstalled "Toshiba Recovery Disc Creator". This software is preinstalled on all new Vista notebook. it can happen that people don't think about it and because of that Toshiba has designed small reminder with follow content:
+*Important INFORMATION*+
+*your system is equipped with hard disk recovery system. If you need to repair*+
+*your computer by restoring it to original factory state, you can do it directly*+
+*from harddisk (press F8 when you boot your computer, choose "Repair your computer"*+
+*and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.*+
+*Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator"*+
+*to ensure that you are able to restore your computer to the original factory installed state, even if your computer gets seriously damaged.*+
So now the question: Have you seen this reminder? Have you ignored it? Have you started preinstalled OS at the first day?
What you have done exactly?
Sorry for all those questions but lot of people make big mistake: they don't even start preinstalled Vista and install WXP immediately.
On this way you will not be able to create recovery DVD and you will also loose F8 option to install Vista from HDD.
To be honest I don't know why this thread was posted under WXP category. As I wrote before after WXP installation on new notebooks you will not be able to use F8 and HDD recovery option.
So if you want good answer please explain to us exactly which notebook model do you have and what you have done in the past.
Bye my friend. Just stay cool we will find some solution or good explanation why this happen
Have a nice day.

Windows failed to start. A recent hardware or software change might be the cause.

I'm using HP dv6 7043 cl. My system was really slow. It was taking almost 7 mins in startup. I tried to reboot but I think I chose the wrong option while doing it. I pressed F9 button. It asked me to choose DVD-R or usb. I chose dvd option as my recovery was made on discs. Later it gave me the hp recovery menu options. There, I chose system recovery. It did it successfully but now the windows is not starting. It says Windows failed to start. A recent hardware or software change might be the cause. Can someone please help and tell me how can I solve this issue and again get back my original windows?

Hi,
Assuming this may just a problem with the recovery media/process, here's an alternative option you could try.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create a Windows 7 installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - this is listed as Windows 7 Home Premium ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source - Digital River.
Windows 7 Images.
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows failed to start. Could not load file Windows\System32\winload.exe

My friend tried to recover his laptop by using the recover button u can do from (controlpanel) and systems. It failed and when I try to start his laptop it says the typically Windows failed to start, \Windows\system32\winload.exe. Status:0xc000000f.
If it was my own laptop and if it was a desktop I would just make a clean installation. Delete all partitions and install new windows. But his laptop got these ones........
disk 0 partition 1 200 mb system
disk 0 partition 2 227,7gb all free, primary
disk0 unallocated space 194 gb all free
disk 0 partition 3: lenovo 29gb 8mb free, LOGICAL
disk 0 partition 4:LENOVO_PART 14 gb 3.3free OEM (reserved)
Im afraid he got 2 harddrives a hdd and a sdd for windows. Im not sure and this looks like **bleep** to my eyes.
So if I could prevent deleting all partions and do a normal recovery it would be great.
SO I found this and I dont know if its what I should do. coderforlife
But when I type the things in command it doesnt work.
SO guys what should I do? DOnt wanna destroy his laptop cause he needs to use it at saturday.
Best regards Niklas
Btw im not sure if the thread is in the right place. Let me know
Solved!
Go to Solution.

I hope there is another computer around using the same version of windows 7. You need to create a repair disc. Then you need to run a startup repair.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

How to fix "0xc000000e:Windows Failed to start" boot

I have pavillion g6, with message above. Start up tests all passed. t
When computer turn on, black scren "Windows Error Recovery"
Launch startup rlation disc..repair - fails
Start Windows Normally = sends to windows boot manager, with message in subject to insert installation disc
I downloaded iso. Does not work please help

Hi Bwald,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion g6 Notebook and getting a Windows Failed to start. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices. You could try a system restore. Here is a link on what to do when System Restore fails. If that does not help you will need to return the BIOS to factory defaults. In this document it gives you a step by step to resolve the boot device error.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Qosmio G45-AV680 - Windows failed to start

My cousin have this laptop and it could not boot the system. It shows message:
"Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Window installation disk and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disk, contact your system administrator or computer manufacturer for assistance. Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible"
I tried to enter SAFE MODE, but it cannot do it. It starts to load drivers, but it stops at one moment and wont continue ...
The problem is that she did not get any DVD with laptop. I suppose that the Vista OS, that came with it is at the special partition on hard disc, but how can I acces it? How can I reinstall the system? I dont mind if I lose data, I just wont to get this to work ...

If recovery DVD is not delivered that means recovery installation can be started from HDD. I don't know how it works exactly on US notebooks. Try to press zero button after start up to see if HDD recovery option can be started.
By the way: check Toshiba US support forum under http://laptopforums.toshiba.com/tshb/
Maybe someone there can explain to you how it works to start HDD OS installation.

0xc000025 - Trying Recovery System via Recovery Manager: Windows failed to start.

Similar Messages

Maybe you are looking for