0xc0000428 error code on boot no installation media

When I turn on my laptop it comes up with the blue screen of death and it says recovery at the top.
It then says error code: 0xc0000428
I'm not an IT wiz and have no idea how to solve it.
Can anyone help

TF
If it came with win 8 installed there is probably a reset to factory/restore partition. If you can eventually get it to boot we need the crash log called the DMP files to know what is happening with the computer.
We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
WE NEED AT LEAST TWO DMP FILES TO SPOT TRENDS AND CONFIRM THE DIAGNOSIS.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
Wanikiya and Dyami--Team Zigzag

Similar Messages

I am receiving an error code EX11 during CC installation from Creative Cloud

I am receiving an error code EX11 during CC installation from Creative Cloud.

Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

Error code 82 occurs during installation...how to overcome?

Error code 82 occurs during installation...how to overcome?

Hi Sameer,
You can follow the article: Error downloading, installing, or updating Creative Cloud applications which might help you to get your issue fixed.
If you still face any issues I would recommend you to paste a screenshot of the error message you are getting.
Thanks,
Ratandeep Arora

Can't boot arch installation media with nvidia 9600GT – nouveau error

Hello!
I recently tried Arch Linux and was very pleased with the performance and distro philosophy. I've managed to install it on my laptop following the beginners guide. Though, today I tried the same thing on my desktop computer and can't even reach the installation command line. This desktop have a nvidia 9600GT graphics card installed.
I leave my process here for better understanding:
Boot computer with installation media (I'm using the archlinux-2013.08.01-dual.iso);
Select Boot Arch Linux (x86_64) option from the menu;
Kernel starts to boot and then it gives me the following right after the Triggering uevents message:
nouveau E[ PFIFO][0000:02:00.0] DMA_PUSHER - ch 1 [DRM] get 0x000000000 put 0x0000000000 ib_get 0x00000000 ib_put 0x00000001 state 0xa0000000 (err: IB_EMPTY) push 0x00406040
the boot process freezes and I have to manually shutdown the computer.
Just to be sure, I tried the same installation media on a different computer and it boots normally.
I'm thinking of swaping the graphics card temporarily just for the initial installation. After that I could install the nvidia drivers and connect this graphic card back on. But sadly I'm one graphics card short.
Can you help me?
Thank you in advance.

cfr wrote:
Welcome to Arch.
Try editing the kernel command line and adding nomodeset. This should force the OS to fall back to an alternative because nouveau requires modesetting, if I remember correctly.
Wow! That solved it! Thank you.

[SOLVED]Hanging after booting from installation media

Yesterday I booted from a rw-DVD got to the terminal and could execute commands, connect to the internet and use elink etc no problem. I didn't go through with installation as I wanted to read up more on partitioning my drives for dual booting before actually doing so.
Trying the same thing today, and it hangs soon after I boot, regardless of whether I do anything. Printing the following:
nouveau E[ DRM] failed to idle channel 0xcccc0000 [DRM]
pci_pm_runtime_suspend(): nouveau_pmops_runtime_suspend+0x0/0xf0 [nouveau] returns -16
INFO: rcu_preempt detected stalls on CPUs/tasks: { 6} (detected by 1, t=18002 jiffiess, g=974, c=973, q=604)
This is without me typing anything. If I try to execute a command quickly after booting it sometimes works, but after a couple of minutes it will complain of a soft lockup.
I've tried burning another disk, and using a USB installation media, but the same thing happens. Any thoughts?
Edit: Trying to run it on a laptop with i7-4700MQ, 16GB ram, and Intel(R) HD Graphics 4600 / NVIDIA GeForce GTX 770M
Second Edit: Booted with nomodeset, which worked and allowed me to install. Just trying to sort out the sodding boot loaders now...
Last edited by glfharris (2014-07-11 22:42:31)

Welcome to the forum.
First of all, you should get in the habit of using [ code ] tags when posting code, not [ quote ] tags (well, unless you want to apply some styling to it, like bold, italic, etc).
This is wrong:
# umount /dev/sdc
This is correct:
# umount /dev/sdc1
You were trying to unmount the drive as a whole, which obviously isn't mounted, instead of the first (and probably only) partition. Had you followed the advice from the note to use blkid and check if it's mounted, this wouldn't have happened. But the fact that a DVD produced that error puzzles me... I have no experience with UEFI, but I think you need to press F10, F11, or something like that, to able able to get to a UEFI boot menu, and choose the optical unit as source.
I hope you used a BitTorrent client when downloading the ISO, and not some direct link (which are prone to CRC errors). If you used a direct link, then check the MD5 and make sure that it matches the one from the Download page. For future reference, torrents are checked while they're being downloaded.

Unexpected Error Occurred (error code -600) after Leopard Installation

Installed Leopard for the second time.
Everything seems to work fine, but after opening and then closing Mail, I'm unable to open it via the dock. Tried to open by selecting from the applications menu, and get the following message:
The operation could not be completed.
An unexpected error occurred (error code -600)
Same thing with Backup, Parallels too.
Shutdown behavior is odd. From the apple icon, shutdown doesn't work, everything goes away on the desktop, then the spinning wheel (not beach ball), then nothing. Have to power off to quit, can't be good for the hardware.
Any suggestions, or am I doomed to a clean install and reinstalling all of my applications? Thankfully I have a drive backed up with SuperDuper with 10.4!
Thanks for the help.

OK, I've got ContentBarrier X4 installed and this was the cause of my error codes and it looks like several - if not all of my installation issues with Leopard.
Apparently, perhaps with Login KeyChain update, it wiped out the ContentBarrier administration name, and on launch, it was likely blocking the applications.
First, install the Login KeyChain update (see Apple software download page).
Reinstalled ContentBarrierX4 http://www.intego.com/services/updates.asp (make sure to select ContentBarrierX4).
Open ContentBarrierX4 - you'll have to sign in as the administer. You may have to go into Preferences > Accounts > to make sure that you've got admin rights.
Once you logged in, exit, then reboot.
For the first time since installing Leopard, I can shutdown without a hard power off.
Salvation...

HELP!!!! Error code 0xc0000034 boot problem

Hi, my less than a year old Toshiba Satellite encountered the Boot BCD Error screen, I looked online for support and creted a recovery USB drive from a friends PC. I followed the directions I found that led me to the US > Trouble Shoot > Advanced Option screens I put in all the Bootrec/ xxx   suggested commands, got to the end and it told me the system is not recognizable, is there another way to get the PC to boot after this error mesg?
Can someone please help with this?
Thanks

Hello there... Hopefully this will help you get back up and running.
Ran into the same issue when I booted my PC this morning. Blue screen
Your PC needs to be repaired
The Boot Configuration Data File is missing some required information.
File: \BCD
Error code: 0xc0000034
blah blah... Alright so you mententioned you've created the USB stick and booted into it.
Click the trouble shoot icon -> advanced -> command prompt. Then enter the following commands one by one.
For my build C:/ is the windows harddrive. If your harddrive with windows on it isn't C:/ then change the letter to match your configuration. See at the bottom if you are unsure, I'll post some commands to help you work out which is your windows drive.
Bootrec /fixmbr
Bootrec /fixboot
Bootrec /scanos
Bootrec /rebuildbcd
After each line hit enter, you will see a success message. Then finally type in..
BCDboot c:\windows /s c: /l en-us
The slash after the C: and before windows has to be a backslash.
Reboot and you're done.
Run this fix on 4 coumputers so far, haven't determinted which part of the process fixes it but haven't run into any problems on doing the above.
Finding out your windows drive
In the command prompt type in
diskpart     hit enter and a new window will open. then in that window type
list volume      hit enter once again and your drives will be listen along with the drive letter
/Widowmaker.

Error Code A12E6 during the installation of Acrobat XI Pro. Help?

Hi, I successfully downloaded trial version of Acrobat XI Pro, but ran into problem when I clicked Adobe Application Manager. The dialogue says:" Sorry, there seems to be a problem with the installation process (Error Code: A12E6). Can someone please help?

I suggest that you ask in the appropriate Acrobat forum (this is the forum for Acrobat.com online services). And tell them your operating system.

Error code -13 when building installer

Hello,
I need some help! I am trying to create an installer for my application; which was created with no problems; but I keep getting a message about an error code -13. I'm adding an image of the message since it is a long one. I really don't understand what the error means or how to repair it. Any help I could get is appreciated!

Hello rd.mcdt,
The following link has information about a similar problem, could you try to follow the process described on the link? Please look for error code 13 instead error code 30 and let us know if this helps.
Error 30 Occurred at CDK_CreateNewWizard_Invoke.vi.ProxyCaller When Trying To Build a LabVIEW Installer:
http://digital.ni.com/public.nsf/allkb/8E5E6C58C625B88A8625786A005B21E0
Best Regards
David P.
National Instruments
Applications Engineer
www.ni.com/soporte

Error code 1 - Creative Desktop Installation

Hello , I'm having failed the Creative Cloud Desktop installation ( error code 1 ) . can you help me?

Error Code 1: "Failed to install" | Creative Cloud Desktop : https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

Satellite L850 - Error Code 0xC0000005 during Win8 installation

Hello, i have a Satellite L850-1v3 Laptop and accidentally i destroyed my Hard drive
Now, i'm trying to install Windows 8 in a new hard drive but it always get stuck on 89% and this error code come up "0xC0000005"
I have tried with different Installation discs, through CDROM, usb etc
What should i do?
Another question that comes up, is "where can i find my Windows 8 serial key?"
Thanks :)

? have a new Hard Drive
No, i haven't the original DVDs..
I downloaded Win8 and i have tried to install them in other machines with success..
Windows 7 can be installed in the hard drive..So there is a problem with the Windows 8 installation in that Laptop..
I have tried different distributions of Win8 with no success..The same error comes up

Error Code 43 on update installation

I get this error everytime I try to update the Creative Cloud on my MAC. Any ideas?
Installer was unable to access a critical file/directory. Please try installing again.(Error code: 43)
Contact Customer Support

Some 10.9.x links
-next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Error code 2318 (problem with installation package) HELP

Ok so I tried to download itunes earlier today, and it went fine until the very end, I got this message...
''The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2318''
So I went through and tried to repair the itunes to no avail. So I removed everything and ran the microsoft installer cleanup utility, then re-installed itunes and quicktime. Again everything went fine until the end, got the same ''2318'' error message. Itunes shows up on my desktop, as does quicktime. When I click itunes I get a pop up window telling me the application must close due to error, would I like to send an error report.
So I went back and uninstalled everything AGAIN, and now its downloading again. I'm getting kidn of peeved... can anyone help me?

ok I got it. Had to end up doing a small overhaul on the computer to remove the corrupted ''sample.mov'' file out of the quicktime folder, but its working now.

Z77 Mpower Error Code 62 Boot Issue

Hey guys. I am pretty dumbfounded on this one. I will start by listing my specs:
MSI Mpower mobo
i5-2500k
Corsair AX-750
EVGA 670
Intel 520 SSD / WD 3TB
So this build has been running fine for absolutely months, no issues whatsoever. Today I downloaded and installed Mumble, it asked me to restart my system which I did. Now nothing out of the ordinary until nothing happens on the restart boot. PC is on, power on, fans all working, LED's on, but no screen input. Note I had changed NOTHING since it was working.
I'm just failing to see why and what caused this and how to fix it. I've tried a few basic things, re-seating GPU/moving to diff slot, re-seating RAM, turning off for 1-2 hours, nothing is working. The error code is 62. I've looked around but as far as I can see there are no dead-set fixes, just hoping anyone here may be able to assist me.
Regards.

I couldn't test it in another system but I had an old GTX 260 on hand and with that the system runs fine.
Which obviously points to the GTX 670 malfunctioning but I still don't get how it can go from fine no issues one moment to completely not working after doing a restart..
Well I guess I'm going to have to RMA it either way. Thanks for the help.

Help with Apple Error Code & Intermitant Boot Up Problems and ? marks

Well that was a long winded Subject line but I am a technical individual ... but know PC's and learn the Mac world which I have fallen in love with.
Recently I have been getting lock up as well as hanging boot ups with the flashing question mark on the screen.
I have been doing some research and one of the most recent things I did was run the Apple Hardware Test. During the quick test I received the following erro message:
4M0T/ 40000003: HDD
I am feeling like this likely a hard drive problem but not certain. I was trying to find what this error code meant and havent any luck yet so I thought I would try and post here. If I could find the error codes it woul dbe helpful. But if you have any ideas please help me out.
I have had session lock up where I can not do anything but move the mouse, totally frozen sessions, as well as boot ups.
One of the things I did earlier was run the TechTools System Tools that came with my Imac. It said everything was fine. So confused with what is wrong.

For an iMac 24 inch (Early 2008) 3.06 GHz machine, the 4MOT error code* indicates a fan issue, and recommends that a technician…
• shut down, the power back on and retest the machine
• verify that the fan speed indicator is not a zero value (yours is reporting a 3)
Without special tools and substantial experience, and because doing so would require opening your machine and thereby invalidating its existing warranty, they indicate that a technician should…
• verify that the fan blades are not obstructed by cables, tape or other obstacles
• verify that the fans are properly connected to the logic board and rotate when the machine is started
• if the problem persists, replace the fans and retest the machine
• if it still persists, replace the logic board
While HDD is a commonly used abbreviation for hard disk or hard drive, there is no Apple Hardware Test error indicator for a hard drive for this particular platform, and yours does not relate to one based upon that AHT result. While there may be a sensor issue in play, AHT does not report a sensor issue in your case.
You may wish to run the SMART diagnostics against your drive to see if it indicates an impending failure, but what you report is limited strictly to fan operation. You should take your covered machine into a dealer or service provider in order to have it tested and repaired under warranty.
*NOTE: these error codes are often non-unique, and can mean very different things from one model series to another, and—within one product family—from one specific machine type to another.

0xc0000428 error code on boot no installation media

Similar Messages

Maybe you are looking for