0xE800000A Error / iPhone Display starts to flicker

Hey!
Since four days I have problems with my iPhone 4. So I started to restore my iPhone with iTunes four days ago. I put it on DFU and plugged it on my laptop.
iTunes downloaded the newest iOS (7.0.4) and started to restore my iPhone. But then suddenly there came an error message:
"iTunes could not connect to this iPhone because an unknown error occurred (0xE800000A)"
I've never read an error like this in iTunes. So I started to worry about it. I unlocked my iPhone and then I saw that my display flickers! It was really strange
because I've never seen this before on my iPhone. It was the first time. And my iPhone really didn't run very well. I was not amused about that.
So I started to restore my iPhone again after that. Now it worked but the display still flickers. After one day the problem was solved with my display but the iOS didn't run well. Today a few minutes ago I started to restore it the 3rd time. There was the same error (0xE800000A) and now the display started to flicker again.
It's really strange! Where does the problem with the display come from? What should I do?

I had the same problems, which were posted to:
http://discussions.apple.com/message.jspa?messageID=2660382
http://discussions.apple.com/message.jspa?messageID=2630602
http://discussions.apple.com/message.jspa?messageID=2747734
It appears you found those.
Applying the 'second' 10.4.7(intel) update did not solve the problem for me - I'm still running 10.4.6.
MBP 15" 2.16(b) Mac OS X (10.4.7) external 19" DVI monitor

Similar Messages

I have a macbook connected to LED cinema display. The display started to flicker. The display turns black for a second or two. Sometimes I restart macbook and display. Sometimes it helps.

I have a macbook connected to LED cinema display. The display started to flicker. The display turns black for a second or two. Sometimes I restart macbook and display. Sometimes it helps.

same issue, either your wiring or display itself is going bad. for me, it was the display but luckily still under warranty

Iphone 5 starts to flicker just before the UserID and Pwd dialog appear

Is it a software problem or hardware ? If it is hardware, then I would take it to Apple store. Please advice.

I had this same problem with my new MBP 15", but only with the USB port on the left side. The USB port on the right side worked fine. Perhaps the ports on the left don't have enough signal energy for the iPhone.
Anyway, try using a different USB port, and if that doesn't work, perhaps you could try a powered USB hub.

My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery." My question is: how to fix this?

My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery." My question is: Why is this happening and how do I fix it? (I'm losing battery power precipitously). Thanks in advance for any assistance with this question.

Thanks Kilted Tim, you solved the problem. I'm mightily impressed at the simplicity of the solution!
Jaded Kane

Error 1067 when starting Apple Mobile Device service with Iphone 4S

Hi,
Excuse me for my bad english but I'm from Spain. I need your help.
When I start Itunes I get an error because Apple Mobile Device service is not started, and when I try to start It from windows services (it's fixed to start automatically but it does not starts on windows start up) I get an 1067 error. I don't have any mega* program installed, wich I've seen could be the cause of the error.
If I install Itunes 10.0 with it's Apple Mobile Device service this service starts with no problem but I can't use Itunes because I get an error when I start Itunes, any version of Itunes under 10.5 don't recognise my Iphone, and in 10.5 and newer versions I do get the famous 1067 error. I tried to reinstall several times/versions but I always get the same error in any version.
What can I do?
Thank you.

With a 1067 I'd try the following document. (MegaUpload and MegaKey are the usual culprits, but I've seen other LSP conficts produce the 1067 too.)
Software de Apple en Windows: pueden producirse problemas de rendimiento y iTunes Store aparecer vacío

I have iphone 3gs 8gb now im update 6.1.6 in the end error (1)display please give me solution

i have iphone 3gs 8gb now im update 6.1.6 in the end error (1)display please give me solution

http://support.apple.com/kb/TS3694

TS4036 why cant i backup my iphone with itunes or icloud it keep giving me error * iphone cant be backup because sesion cant be start* -_-

why cant i backup my iphone with itunes or icloud it keep giving me error * iphone cant be backup because sesion cant be start* -_-

Delete your most recent backup in iTunes (iTunes Preferences>Devices, click on the backup, click Delete Backup), if using a PC click Reset Sync History (also in Devices), then close iTunes, restart your device, connect your device again, open iTunes and try syncing again.

The display used to flicker, now it's completely white! PLease HELP!

So, my display used to flicker with horizontal lines all over it, and slightly adjusting the angle of opening would fix this, but about a week ago it lightened a few times, then got stuck being really light with the desktop being barely visible, though better from way down angle (if you open it all the way out) and looking like a negative from the way up angle. I restarted it, and the problem persisted. I shut it down for a day, and, upon startup, the screen is now completely white with nothing visible on it. I had connected the PB to my tv using the s-video out jack on the back and I can see the desktop clearly on it, but it's extremely difficult to read any text, largely due to my tv being big and not hi-def. So far I had tried fixing or diagnosing it by switching resolutions and calibration in the "display" area of System prefs and also in universal access "seeing" tab, I've reset the PMU and still nothing. Here's what's going on: if I start visualizer on the iTunes, both the TV and the stock display flicker to black, then the TV does the visualizer thingy and the display goes back to white. The apple logo backlight is on no problem at all times as well. The laptop was never dropped, handled roughly or subjected to extreme temps. The flickering problem had first appeared when I had relized that I only had about a minute for the battery to go completely empty (my 'puter is almost 3 years old). The recall for the displays covers laptops manufactured about 2 months after mine, otherwise all the symtoms listed in the recall match. Does anyone know what I should do next? I had read about getting a new LCD inverter, but at the same time I am now unemployed and really have no dough.... I'm a sound engineer, and I need my PB to be mobile. The only thing that had happened recently is that I installed the newer version of Pro Tools on my machine, LE 6.9. Please HELP!
PB G4 Ti Mac OS X (10.3.9)

You might have to restore the pictures from your ""backup" you have on iCloud. But, then again, that would put your iPhone back to the last state it was in when doing that backup. But at least you would have all your pictures back.
iin any case, I wouldn't do any further backups or any changes to your iCloud account, until you've got your pictures back again. Proceed cautiously and carefully at this point, until you get an answer that will safely restore the pictures.

I purchased my iPhone from UK which is unlocked but Now I am back to My Origin i.e INDIA and unfortunately my iPhone Display get damaged and Now I have to Repair it but..... The Problem is "iSTORE in India Doesn't Helping me in this issue"

I purchased my iPhone from UK which is unlocked.
But Now I am back to My Origin Place i.e INDIA.
And unfortunately my iPhone Display get damaged.. and Now I have to Repair it but.....
The Problem is "iSTORE in India Doesn't Helping me in this issue".
I would request APPLE please get this FIX as I am also your customer and now it is globalization.
SO please find any way to get this fixed...
Apple Customer care Please send me any Services note That I can show to iStore in India i.e (In Korum mall Thane, Mumbai, Maharashtra, India )
So I can get my dispaly fixed in INDIA itself.
Requested to please help me out of this issue..
Thanks
APPLE user
sonu.mas007

They can provide some kind of way towards this solutions...
eg:
1) Accept my UK iPhone in India courier it to Purchased Place (Repaired it)
2) Accept my UK iPhone in India Take some difference assign me India iPhone.
3) Accept my UK iPhone in India give me any option to ugreade to iPhone 5 (Indian).
4) Accept my UK iPhone in India give me some Receipt (Courier me My new iPhone from UK).
5) Approve my VISA for going to UK again as it not easy for INDIAN to go there with some kind of this Reason.
6) Give the Postal Address where we can send our APPLE to get only Service and they can send it back to us if it got reparied.
As no one would like to go UK only to Purchase APPLE..
There are some personal reason they have to go to Other countries for ... and If some one is FAN of APPLE like me would do the same mistake that I have done..
7) If the APPLE wanted to serve their customer they would have get to the solutions with their excellent mind.
As far as I am concern I am just the USER of my FAV APPLE but.. .. I guess this policy would not keep me as the SAME FAN of APPLE as I am now...
If this is not going to get solved I guess I have to start with other BRAND Like SAMSUNG S4 where I can get everything in my STATE..
But YEH it not a right was to have this BAD policy.
I just dont know why they are not coming ip with great solution for this issue in this tecnology world.
Any help to find other BEST Brand who has awesome services..

Error 8 when starting the extraction program

HI all
I have the following problem when i start an extraction. "Error 8 when starting the extraction program" I test the Extraction program on the R/3 system(source system) and it works, It displays records. On the target system in the infpk under step-by-step it gives you the error and It does not give a oss number, it only suggest that you need to look for a OSS. We have BW 3.5 installed with ECC 5.0.
Also on the source system Tcode WE02, for the load period id displays the IDOC with a red light with the same error. It displays the partnet, basic type and the port, the Error is marked next to inbound(inbox).
Regards
alex

Alex,
Check the following OSS notes
947690
511475
23538
Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
Abdul

Error 8 when starting the extraction program (BI7.x)

I am receiving the following message when loading from the ODS to the data targets:
Error 8 when starting the extraction program
Message no. R3019
Diagnosis
Error 8 occurred when starting the data extraction program.
System response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or create a problem message of your own.
I have searched the forums and OSS, and can't find anything that matches my situation exactly. I was originally getting an error message that the infosource (80FIA_DS11) didn't exist in the source system. I restored the BIP client and all transfer structures were reactivated. Now when I try to load, I get this error 8. Has anyone experienced this issue?
Thanks,
Pam

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

Error 4 when starting the extraction program

Hello Gurus,
Yesteday I got one error "Error occured in the source system"that "Error 4 when starting the extraction program" and "error in the source system" has given, it has affected all the loads,please any one give me solution for thia it is urjent.
Please find the error message bello.
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
An error occurred in Service API .
Check the error message.
Procedure
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is
Thanks,
Muddu Reddy.

Hi sekhar,
You can try this. you right click on the datasource and click on display in source system it takes you to the R/3 system enter the user id and password so u can now see the datasource in the R/3 so now click on back f3 so now u vl be in BI now replicate the datasource and try to load the data. I think now it should work fine.
Tell me if you still face some problem.
Thanks
Ram

HT201263 My iPhone 4 started to update but got stuck in recovery mode. I've tried everything anyone on the website has told me to do, but nothing has worked. Is there anything I can do? I need my phone

My iPhone 4 started to update but got stuck in recovery mode. I've tried everything anyone on the website has told me to do, but nothing has worked. When you go to turn it on, it shows the Apple symbol, then it goes to the connect to iTunes screen. When I do that, it just says error with the code 9006. I've followed what the Apple site has said to do for it, but the phone is still is the same state. Is there anything I can do? I need my phone back as soon as possible.

Hello Hester Emily,
Thanks for using Apple Support Communities.
I'm sorry to hear about the difficulties you're experiencing after this update process. I found the following article that has more information on the iTunes error code 9006:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Take care,
Alex H.

My iPhone 4 started to lag...

As stated, my iPhone started to lag. It also kept saying "seaching." So I turned it off and now I can't get it to turn back on. When I plug it into and outlet or my laptop the Apple icon shows up. But, other then that it remains off. What do I do?! ( Yes, I have tried the power and home screen buttons.)

Hi Yin.Q,
Thanks for using Apple Support Communities. This article has steps you can take if your iPhone will not turn on:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Cheers,
- Ari

Bi data upload error:status 51 - error: Error 8 when starting the extr prog

while data load form the source system into thw bw i am getting error in error monitor as under,
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
                                IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
                               Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
   r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
                 IDoc sent to SAP system or external program"
   bw side: "IDoc: 0000000000007089 Status: Application document posted,
                 IDoc was successfully transferred to the monitor updating"
what to do at r/3 side?
Best regards,
dushyant.

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

0xE800000A Error / iPhone Display starts to flicker

Similar Messages

Maybe you are looking for