1.1.1 update for ipod nano didn't work for me

I install the 1.1.1 ipod updater for my nano tonight. It seemed to install okay, but in messed up the backlight on the nano. When the nano had 1.0 installed, I had the backlight set to 'off'. By holding down the menu button for a few seconds the backlight would go on or off. With the light switched on, the light would stay on while I was using the control buttons. That's the way I like to use the backlight, always have on all my ipods. After installing 1.1.1 the backlight wouldn't work that way anymore, so I reinstalled 1.0 so I could use the backlight like I used to. Update 1.1.1 has a flaw.
Any ideas about my problem?

"Update 1.1.1 has a flaw."
No it doesn't.
That function was intentionally removed by Apple with the update version 1.1, and remains like this.
See this.
http://docs.info.apple.com/article.html?artnum=303123

Similar Messages

  • I updated my iPod nano 6th gen firmware 1.1 to 1.2 with iTune but it is not ok because of connection

    I updating my iPod nano 6th gen firmware 1.1 to 1.2 with iTune. But it is ok because an network error has occurred. How can i solve this problem.
    Can I download iPod nano 6th gen firmware 1.2 update file without using iTune?
    I want to offline update with iTune.Can I get firmware 1.2 update file.

    Universal Serial Bus controllers
         Intel(R) ICH9 Family USB Universal Host Controller - 2934
         Intel(R) ICH9 Family USB Universal Host Controller - 2935
         Intel(R) ICH9 Family USB Universal Host Controller - 2936
         Intel(R) ICH9 Family USB Universal Host Controller - 2937
         Intel(R) ICH9 Family USB Universal Host Controller - 2938
         Intel(R) ICH9 Family USB Universal Host Controller - 2939
         Intel(R) ICH9 Family USB Universal Host Controller - 293A
         Intel(R) ICH9 Family USB Universal Host Controller - 293C
         USB Composite Device
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
         USB Root Hub
    I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

  • I just recently updated my iPod Nano 7th Generation, and, after the upgrade finished, my iTunes library, playlists and all, vanished. How can I restore the playlists and songs to iTunes?

    I updated my iPod Nano 7th Generation, and it wiped my iTunes library. I no longer have my playlists or movies. I was able to recover my music, but the many, many playlists I had, I could not recover. Is there any way I could recover them?

    Hello apbvieira,
    It sounds like your iPod Nano is not recognized in iTunes anymore after a recent update. I recommend the following article to help you get that in order named:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    1. Start with the iPod Troubleshooting Assistant
    If you haven't already done so, use the iPod Troubleshooting Assistant that applies to your iPod. This will often solve your issue.
    If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
    Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
    This step will get you started, but there are additional steps in the article if you need them.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • When updating my ipod Nano, I get the error message Unknown Error 9006. Any help is appreciated.

    When updating my iPod Nano, I get the error message: Unknown Error 9006.  Any help is appreciated. 

    See this
    http://support.apple.com/kb/TS3694#9006

  • TS1702 Unable to install twitter for Ipad again...this happened after update from twitter that didn't work

    I had a message from the appcentre that there was an update for Twitter. I updated it, but it didn't work, the message: "waiting" or "pause", no green line which is filling. I removed it, and tried to install it again, but no succes. Other programs" no problem, only twitter doesn't work any more. Does any one know a solution??

    Same exact thing I did and I have the same exact problem

  • TS1372 I was just about to about to update my iPod nano 7 from 1.0.2 to 1.0.3 . And after the complete download of the software,it says "The firmware file could not be found"   A little help anyone!!!

    I was just about to about to update my iPod nano 7 from 1.0.2 to 1.0.3 . And after the complete download of the software,it says "The firmware file could not be found"   A little help anyone!!!

    Welcome to Apple Discussions!
    Take a look at these two articles. The error messages are not the same, but they may help...
    http://docs.info.apple.com/article.html?artnum=304309
    http://docs.info.apple.com/article.html?artnum=301267
    If not, post back.
    btabz

  • I can not update my ipod nano 2nd. Please held me...

    I can not update my ipod nano 2nd. Please held me...

    Try the 5 "R's" here  >  Apple - Support - iPod - iPod nano (2nd generation) Troubleshooting

  • Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

    Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

    Yes, your battery is likely toast and in need of replacement.  Not much else for troubleshooting here.  Sorry.
    B-rock

  • I tried to update my ipod and it didnt work,I think it got a virus and then  tried to recover it but it didnt work. What should i do?

    I tried to update my ipod but it didnt work and it turned off, it came up with the plug and the itunes symbol when i turned it on and thats all. So i plugged it in itunes and then tried to restore it but everytime i tried to restore it, it didnt work! So i took it to harvey norman, to see if they could fix it or restore it but they couldnt fix it . So, what should i do?

    Without more information like what happens when you restore the iPod all I can suggest is:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • TS2771 i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO

    i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO so i todd what others did then i did it but it kept showing the apple sign and now turn to blue again the turn yellow now white. Apple please fix it i havent been able to be gone at all past few days because of this also tries to connect with my labtop didnt work whats up with it. for people who didnt update it wait until they fix it beleive me

    it still blinking with the apple sign

  • HT5521 MY USB cable has a error message UNknow Devise and my IPod Nano has stop working as I was downloading Itunes

    MY USB cable and Ipod Nano has stop working while I was dowloading a CD to  from my computer to Itune.  Error message is a Unknows Devise.  Unable to turn on Ipod nano

    Hello hjoan
    Check out the article below to troubleshoot issues with your iPod showing up on your computer and in iTunes. It will give you multiple options on troubleshooting the issue.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Regards,
    -Norm G.  

  • My iPod nano don't works. I take shower with it. What do i do?

    my iPod nano don't works. I take shower with it. What do i do?

    iPod nano's are not waterproof.  It's almost certainly dead.  Time for a trip to the Apple store to buy a replacement.  Try and keep the new one dry!

  • Ipod nano playlist not working need help plz

    my ipod nano playlist not working i'm a runner so i set my songs in the order i want them and for the last week they don't play in that order its random.it just skips around the playlist and is really anoyying. not sure what gen my nano is i got it in novber 2011. would love some help thanks

    iPod Tutorials
    iPod Repair Tutorials
    iTunes & iPod Hints & Tips
    iPod nano Troubleshooting Assistant
    iPod Troubleshooting Assistant

  • TS1717 Started a software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    Started a Itunes software update this morning which didn't work.  Now Itunes will not open at all.  I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

    There are a couple of options that I know of to fix the issue.
    One is listed in this thread - https://discussions.apple.com/message/24606478#24606478 - and involves uninstalling iTunes and related components and then re-installing iTunes.  You will need to read the instructions in the thread to see the correct uninstall order.
    Second option is use System Restore to set your system back to a date prior to the iTunes update.  I did this before finding the thread mentioned above.
    Not sure exactly what the problem is but I know, after a search, that MSVCR80.dll was indeed already installed on my computer. 
    Message was edited by: karivers

  • Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

    Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

    If the Belkin supports the A2DP (Stereo Bluetooth) profile then it will work.

Maybe you are looking for

  • Error while setting input parameter for dynamic process - GP

    Hi All, I am using CAF 7.1 GP. Here I have to start a process dynamically and it is working fine. But, when I tried to set value for input parameter of this process by IGPStructure params = GPStructureFactory.getStructure(process.getInputParameters()

  • Interactive Report Webclient issue:

    Hi, We are facing starnge Issue in IR Web client report.We have IR report filter at leaf level.When we select 4 or 5 filters then we are genaratig the report and Query results 5 laks records.When we are selcting 9 Id's the Query processed in 10 mints

  • When I use black wallpaper my lockscreen is error in iOS 7

    My lockscreen an error when I use black wallpaper in iOS 7 you will see the drifference between both of photo. I've already restore, all reset but this error still remains last time it's swipe with normal and error but now it's error all time. please

  • HT4137 I don't see reset in my general setting. Where is it ?

    I don't see a rest under general setting! What do I need to do to reset my iPad when I don't have a rest option?

  • My new MacBook Pro will not read my OSX disk.

    So far everything has been working great on this computer until I reached this problem. Other CD's seem to be read just fine except for the CD's that came with my computer. Questions. 1. What can I do? Will Apple give me new ones for free? 2. Is ther