1.1.2 NOT released for U.S, Yet?

It seems that  has yet to post 1.1.2 in the U.S. via iTunes. There is a link that is going around where you can do a forced update. Can someone confirm this information is correct?
For myself, I think it is safer just to wait for  to push it to iTunes.... Thoughts?

yvonnejim wrote:
You can definitely get 1.1.2 by doing a restore. The firmware restore automatically puts 1.1.2 in your iPhone. No real differences are apparent in the update, although I noticed that iTunes 7.5 improves the backup capability to the extent that ALL data is saved in your backup file. This includes your iPhone photo roll, YouTube, Stocks, and Google Maps Bookmarks etc. I can't find anything that it doesn't back up now.
Restoring didn't work for me; had to go the manual route.

Similar Messages

The FM "DD_DOMA_GET" not released for 'remote' calls.

Hi,
When I try to import RFCs from my CRM system in XI, I am getting the following exception:
com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: The function module "DD_DOMA_GET" not released for 'remote' calls.
Solution please!!
Regards,
Mahesh.

Hi,
Making remote enabled will solve this,
see my reply(Anirban) and jacob's reply in this thread(although this was with idoc)
Unable to import SAP objects
For, We tried to make it Remote Enabled but it asks for "Access Key". How to go further?

You need a devloper access key for FM, in SE37
you can get one in market place, follow this thread,
Whats Development Key
Regards,
Anirban.

Function module WWW_ALV_CALL is not released for the Internet

Hi
I am facing this error Function module WWW_ALV_CALL is not released for the Internet and Only user SAP can release the function module.
Best Regards
GAGAN

hi,
This Web based calls are not available anymore in Netweaver 2004s/7.0.
More information in SAP-Note: 910202
Hope this helps
regards
Tobias

DME - it is not released for customers

Hi friends,
I am getting error when i am executing F110 with the help of DME. Payment document is generating but i am not getting the file which i have to send it to bank. This is the error i am getting it "Format tree 8301:DME FOR OUT GOING PAYMENT of tree type PAYM was delivered by SAP; however, it is not released for customers. SAP does not guarantee that the corresponding formats are mapped correctly for format trees with this status".
we are using SAP 4.7 EE version. Even i have gone through the SAP note. 656591. But i couldn't fine any help. Please help me if anybody faced the same kind of problem.
Thanks,
Rams.N

Use the keyboard shortcut Command + Option + Esc That will prompt the Force Quit window.
Or click Force Quit from your Apple menu  drop down menu.
Mac OS X: How to quit an unresponsive application using Force Quit

Save button on GUI does work in ver. 5, IE_Tab not released for ver. 5

I was recommended that I should be able to use FF - but the saving button on the GUI for the data portal does not respond and the IE_Tab is not released for the latest version FF
:-) Ole

IE Tab V2 (FF 3.5, 4, 5, 6, 7+) 3.5.9.1
* https://addons.mozilla.org/en-US/firefox/addon/ie-tab-2-ff-36/
IE Tab Support Forum
* http://getsatisfaction.com/ietab/products/ietab_ie_tab_2_for_firefox
* http://getsatisfaction.com/ietab/topics/ietab_on_firefox_5
Check and tell if its working.

Query not release for OLE DB

Hi..Experts
I need to design a query say Q1, Its taking prod order through a replacement path Query Q2,which is
restricted by Cal month variable.
As i check Query Q1 for allow external uses, Its giving error " Query not releases for OLE DB"
But when I restrict Q2 by fixed month then there is no error....but this is not fulfill my requirement.
I need Q2 should be restricted by Cal Month variable...
What I have done is.....first I restrict Q2 by fixed month. then Q1 query executing perfectly.Once Q1
is executing again i restrict Q2 by cal mont variable. Then also Q1 is running fine, even though it is checked allow
external Access.
I also execute Q1 query in RSRT without using cache . It is working fine. But as I open Q1 on another day is not working, WHY?
I am not getting....Please help me...
your comments will be appreciated..
Edited by: Abhishek@maventic on Jul 8, 2011 3:10 PM

Check whether this helps you
[OLE DB for OLAP|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6a8eb390-0201-0010-8fa3-b70f6f9a17c1?quicklink=index&overridelayout=true]
thanks
G. Lakshmipathi

HCM Process&Forms EHhP5 "proces is currently not released for execution"

Hallo!
After changing the system to EHP5 i got a new error:
Process XYZ is currently not released for execution
I didn't change the customizing! What should i do? I cannot rember that a process is to activate anywhere.
The form and the interface are both active.
Thx for any help!
Best greetings,
Gregor

Hello!
Thx, i checked the SPRO. The valid checkbox is active.
In the backend system I am able to run the process. Before EhP5 we had EhP3 - is there any new customizing for the processes?
Thx and best greetings,
Gregor

DD_DOMA_GET" not released for 'remote' calls : Advice required

Hi,
This is one of the common messages that I(and many SDN'ers) received when I tried to deploy my application in WAS SP12.
I read the messages and it was quite obvious, that DD_DOMA_GET needs to be RFC enabled and this would work fine.
However, I also noticed a colleague of mine who could deploy applications without receiving this error. He has a model in his program and he tries to execute the function module as well in his Web Dynpro program and had absolutely no issues.
When I tried, I received the above error, constantly. I compared his program and mine and found a subtle difference. The view controller - context attributes were structurally bound in my case, and in his case, he used standard types as string, boolean etc... Therefore, I concluded that every time my application tries to execute, it sees a com.xx.app.type.ModelField for a view - context attribute , it uses the JCo Destination WD_RFC_METADATA_DEST and calls function module DD_DOMA_GET. It fetches the type and length of the field. In this case, DD_DOMA_GET is not RFC-enabled and therefore returns with an exception.
My question is : is this workaround i.e. to not use structure binding for context attributes of a view and use simple fields like string, boolean etc. beneficial ? What are the drawbacks of this workaround ?
Best Regards,
Subramanian V.

Good point, Valery and what you assume is also right. We used a particular SAP System where DD_DOMA_GET was RFC-enabled and then changed JCo destinations.
I am not clear with your second point and in relation with my question in particular.
The two points that I made in my first and second post(I should have made them in the same post, sorry about that) are required to not get that error.
a) Type of View->Context->Value Attribute should not refer to model(for e.g. com.aq.model.types.xubname) , especially when there is a UI Element binding
b) Custom Controller should be bound to model and not component controller
I am not even fully sure if there are any other preconditions to avoid the DD_DOMA_GET error, but I tested with the above 2 points and my program also gets executed properly.
From your point:
Next, using Adaptive RFC model in described manner is almost the same as using SAP Enterprise Connector instead while any dictionary-related functionality is not used (see
Re: Poll : SAP Enterprise Connector , second item in list)
I understand that, if I follow points (a) and (b) as mentioned above, I am "almost" using the concept of Enterprise Connector, except for dictionary usage.
What intrigues me is why the distinction between component and custom controller(for failure - DD_DOMA_GET) and more importantly, the method that we are currently using, is it safe ?
Best Regards,
Subramanian V.

G3 iMacs; will Firefox 4 not release for OS X 10.4.11, or am I not trying hard enough to make current OS X run on deprecated Apple hardware?

Since it's lovely for audio, and was fine with w3m in its time, I still have an iMac DV SE 400MHz (G3, tops out at 1GiB DDR, OS X 10.4.11) around. (Though I ''am'' tempted to fit in a Xilinx with CPU cores, cache, DDR3, USB3, NV14, HDMI, etc.)
Ff4 takes OS 10.5.x and up.
Clearly canvas and many HTML5, WebGL, etc. components can not run, per se, on old hardware.
Should I therefore seek a refit of OS 10.n (n >= 5) to tolerate the hardware, or a revision/spin/fork/??? of Firefox? (Using appropriate dev hardware, unless cranking out a rocking OLPC-ish dev/emu tool is a desirable side-effect.) Cues to appropriate search keys for bathtub-curve-filling optimizations are appreciated.

Mozilla are not making a version for PPC Macs, the minimum system requirements are OS X 10.5 and an Intel Mac. There is a third-party version of Firefox 4 for OS X 10.4 and PPC Mac, for details see http://www.floodgap.com/software/tenfourfox

E52 FW ... still not released for me!

Hi,
i keep reading about this V53 or something? im still on the V51!!
when does this come out for my FW?
Kind regards
E52 - Product code 0585050
UK.
V54.003

ive tried FOTA but nothing - however, online, on the website it states V52 is the latest!
E52 - Product code 0585050
UK.
V54.003

I did not charged for 12 hours yet my new probook 4530s. is it okay ?......

HP Pobook 4530s
Windows 7 Home Premium
Question:
I did not charge my new laptop for 12 hours not a single time (which i bought 4 days ago). I am charging/discharging again and again 3 times daily.
Now,
1) tell me is it okay to deal my laptop battery like as it is going on ?
2) can i charge it for 12 hours 3 times (charging/discharging cycles) after its 4 days working ?
send me your response as soon as possible !!!
This question was solved.
View Solution.

I would simply suggest that you use the adapter to power the unit more often if possible, rather than going through 3 charge cycles per day. It's completely up to you -- there is no right or wrong here.
The two tools may be reading it at different times or using slightly different math to calculate this.
The calibration does not require you to charge/discharge 3 times. It is nearly impossible to calculate battery life with 100% accuracy; this is due to the constant changing of power draw. For example, if you are watching an HD movie or playing a 3D game, your power usage will increase. But, if the computer is sitting there idle (not in use, but turned on), it uses much less power. These and other factors make it impossible to perfectly calculate how much battery is left.
I am an HP employee.
• Say thanks by clicking the 'Thumbs Up' button on the left
• Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution' if it solves your issue

Table for Invoices not release

Is there any table to find the list of invoices which are not released for accounting
if yes please let me know
Regards,
KK

Hi,
I think you could check table VBRK for the field: RFBSK(Status for transfer to accounting).
The different value of this field means like following:
     Error in Accounting Interface
A     Billing document blocked for forwarding to FI
B     Posting document not created (account determ.error)
C     Posting document has been created
D     Billing document is not relevant for accounting
E     Billing Document Canceled
F     Posting document not created (pricing error)
G     Posting document not created (export data missing)
H     Posted via invoice list
I     Posted via invoice list (account determination error)
Regards,
Alex

SAP note's for 2011 1099 form

Hi Folks,
Is there any SAP Notes released for 1099 form for the year 2011. Orelse let me know how to get the latest notes which are released for 1099 forms.
Regards
Venkat

Hi Madhu,
Thks for the prompt reply.
But how can i know when notes were released for 1099 forms..? I mean i need to know immediately if anything is changed in 1099 of 2011. SO that i can implement the notes quickly as it is time for 1099.
Regards
Venkat

Released for external use RFMs

Hello,
Is there a comprehensive list of all the RFMs marked as "released for customer/external use" somewhere? If not, is there a way to find if a particular RFM is or not released for external use?
BTW, SAP Interface Repository was not a great help since it has information only on selected RFMs.
Thanks.

Hello,
Thank you for the answer, Christoph. There is definitely a field in the attributes of a FM which says "Released on" or "Not released". I hope you are talking about this field.
A couple of more things:
So, there are very few FMs which are actually released for external use - most of these being BAPIs. Is that right?
(ii) I can not use an FM which says "Not released" in my app, if I want certification of it - right?? It has to say "Released on: date of release".
Thanks.

NMAT order not release

Hi SAP experts,
I want those process orders which have status NMAT not release for production by using user status BS02.
I tried by using system status (BS22) for 10485 to make the release forbidden still it is not working .please advice.
Thanks in advance
Regards,
Rahul

Hi Rahul,
Business transaction 'BFRE' (Release), select radio button 'Forbidd.'.
Business transaction 'RMTF' (Partially release order) select radio button 'Forbidd.
Regards,
R.Brahmankar

1.1.2 NOT released for U.S, Yet?

Similar Messages

Maybe you are looking for