1.1.2 Removed Contact Names From Dialing

First off this is my first post in here at Apple so I've got to make it know that I love the products I own (iPhone and 4th Generation iPod). iPhone has made life easier for me since I'm on the go and needed a really good smart phone.
On to my question... Has anyone else noticed that after running update 1.1.2 you loose the contact's name under the phone number dialed? Prior to the update I would dial a number of a friend and his name would appear beneath number before the send button was pressed.
Is this apart of the new update or have I some way turned this feature off in the settings?
Thanks for any help!

Sorry to hear about your problem. I just updated my iphone to 1.1.2 last night. After doing that i tried the problem that you said you encountered. When i typed in the number with the area code also it put the name at the bottom of the number. Sorry that your phone did that. Maybe you will have to reset your phone and reinstall the update.

Similar Messages

How do I remove my name from an ipod prior to donating it to someone?

I would like to donate my ipod touch to someone as I just bought another one. How do I remove my name from the device prior to donating it? I was able to remove all of my apps, music and videos but not the name.

Go into your settings>general>reset, then select Erase All Content and Settings.

Removing my name from an Alias email

I have been unable to remove my name from the "FROM" in outgoing emails. U have deleted my name in the "FROM" box in the preferences with no luck.
Help...pf

Open address book. Find your own card in address book. Check if this email address is on your own card. If so, you just get your name displayed, as you and this email-address is in address book. Simply delete the email-address from your card, and you shouldn't see your name in "From" any more.

How do I permanently remove a name from a group list?

I would like to permanently remove a name from a group list. I have highlighted and deleted and it still won't go away. I have deleted him from my address book but I cannot remove him from the group list.

There is the mailing list stored (which addressbook)? Perhaps the addressbook is read-only or unavailable?

All calls received come in as "unknown" with no phone number or contact name from my address book?

All calls received come in as "unknown" with no phone number or contact name from my address book? This started to happen after returning from being overseas.

It was a caller id feature accidentally turned off when I I changed my account when returning to the US

I have an iPhone 4s. Suddnely for past two days, the contact names from my address book are disappeared. Has anyone came across this issue earlier and know the solution please?

I have an iPhone 4s. Suddnely for past two days, The contact names from my address book are disappeared. Has anyone came across this issue earlier and know the solution please?

You had to have some kudos for the effort put in to your thread as week as the point you make.

How I transfer my contact names from my Iphone 4S to my Ipad Air ( only showing phone numbers but no names )

How I transfer my contact names from my Iphone 4S to my Ipad Air ( only showing phone numbers but no names ) If I receive a message in my Ipad Air, just the phone number is available, I want to find out if possible to get the name of the contact also ?

Go to Settings>iCloud on your phone, make sure you are signed into the iCloud account that contains your contacts, the turn Contacts to On. When prompted, choose merge.

Dear I have installed last version of iOS And i lost my contact names i restore contact names from setting i restored some of them what can i do now i have important names i have lost please ?

Dear I have installed last version of iOS And i lost my contact names i restore contact names from setting i restored some of them what can i do now i have important names i have lost please ?

Within Contacts, tap Groups at top left. Make sure all contact groups are checked to show, then tap "Done" at top right.

How to remove "Version Name" from contact sheets

When printing contact sheets, how do you remove the words"Version Name" from under each photo.
I just want my image numbers to be there such as JJC_3795. As it appears now is reads, Version Name:
JJC_3795. I went to Presets then to File Names hoping this would fix it, but can't figure out how to make that change. Maybe it's not possible???
Any help would be appreciated.

I don't think it is possible. What I have done is print to PDF and then (in Acrobat Pro) covered the "version name" part with a blank text field, white background, and done the physical printing from Acrobat.

Is there any way to remove my name from the profil...

Is there any way to remove or prevent my profile from appearing in the profile search directory? I'm so tired of ALL the unwanted contact requests. Yeah I know I don't have to add them but this shouldnt even be a problem in the first place. If I want to add someone to add me I'll give them my skype name.

Hi, Phnxbane, and welcome to the Community,
You may certainly remove all profile data by leaving those settings as "blank" or "not specified." I find the easiest way to do this is to open the profile settings from within the Skype "client" software.
Removing/deleting an account name from the Skype search directory closes the account. More details about this can be found here: 'Can I delete my Skype account?'
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Remove Printer Name from Crystal Report

How can i remove the printer name from the Crystal Report so that the PrinterName property of the CRAXDRT.Report object in the RDC SDK is blank WITHOUT having the "No Printer" Option checkbox checked?
Here's the scenerio. When I first create a Report and don't go into Page Setup, PrinterName property is blank. If I go into Page Setup and explicitly select a printer, PrinterName property equals the name of the printer selected. If I check the "No Printer" checkbox in Page Setup, PrinterName property is blank. But if i go back in and uncheck the "No Printer" checkbox in Page Setup, the PrinterName property equals the name of my Windows Default Printer.

I'm still not sure what is unclear about my first question. And I'm not sure how any of the info you are requesting is going to make any difference in answering my question. And I'm not sure how your analogy fits here but ..
Version of CR = 11.0.0.895
CR Service Packs applied = None
Web or Win app? = Win App
OS? = Windows XP Service Pack 3
Development language? = Both Visual Basic 6 and C#.Net 2008
Method of CR files deployment = email the .RPT file to a client
Where were the runtime files downloaded from? = Runtimes are installed from Merge Modules donwload from SAP site
What is the version of the craxdrt.dll on the deployed box? = 11.0.0.893
So here are the exact steps so you can understand what is going on:
I have the Crystal Reports Application open side-by-side with my Visual Basic development environment in debug mode so i can step through the code using the RDC SDK.
1. I open the Crystal Reports Application and create a brand new report - "Test.RPT" and DO NOT go into Page Setup at all and save the report.
2. In my Visual Basic development environment, i run the code that will generate the report, Here's the exact code
    Dim m_crApp As CRAXDRT.Application
    Dim m_crReport As CRAXDRT.Report
    Set m_crApp = New CRAXDRT.Application
    Set m_crReport = New CRAXDRT.Report
    Set m_crReport = m_crApp.OpenReport("Test.RPT")
3. When i look at the PrinterName property in the CRAXDRT.Report object, it is blank.
    ie. crReport.PrinterName is equal to ""
4. I reopen the Crystal Reports Application with report "Test.RPT" and go into Page Setup and check the "No Printer" option.
5. I go back into my Visual Basic development environment and rerun the code that will generate the report.
6. When i look at the PrinterName property in the CRAXDRT.Report object, it is still blank.
    ie. crReport.PrinterName is equal to ""
7. I reopen the Crystal Reports Application with report "Test.RPT" and go into Page Setup and uncheck the "No Printer" option. I have NOT specified any printer, nor have i clicked the "Printer..." button to setup a printer....i have just unchecked the "No Printer" option
8. I go back into my Visual Basic development environment and rerun the code that will generate the report.
9. When i look at the PrinterName property in the CRAXDRT.Report object, it is now set to my WINDOWS DEFAULT PRINTER, yet i had not specified any printer.
    ie. crReport.PrinterName is equal to "
MyNetwork\MyPrinter"
PROBLEMS:
1. The client needs the report to go to the default windows printer of their machine
2. If the "No Printer" Option is checked, the Report does not print at all
3. If the report is set to MY default windows printer and i give it to the client, at times it takes upwards of to a minute for the Print Dialog to disply. As i've read on other forum posts, it appears Crystal is looking for MY printer on the clients machine and takes a minute before i realizes it can't find it and then sets it to the CLIENTS default windows printer.
4. The client believes it is unreasonable to wait a minute for the print dialog to appear ...and i agree.
5. I cannot change the code to use the Select Printer in the RDC SDK - it's a long explanation why but just suffice it to say that i cannot do this.
All i want to do is either:
1. Remove the Printer Name in the actual report from the Crystal Reports designer - basically undoing what Crystal did when i went into Page Setup.
2. Via the RDC SDK, be able to detect the "No Printer" option is selected. Checkign CRAXDRT.PrinterName equal to "" is not an option.

Removing Checklist Name from Checklist Sheet

Hi, I am trying to use the checklist template from Numbers in iWorks 08 as an inventory sheet. I have tried unsuccessfully to remove the word "Checklist" that appears at the top of the page. It is almost hidden behind the top of the columns while editing the sheet, although when I print the page I have the word "Checklist" printed above the header.
Any ideas on removing this???

Ok... I feel like an idiot. I will answer my own question in hopes that this saves someone else from having to ask.
There is a checkbox all the way to the right on the toolbar called "Name" by removing the check from this box the name "Checklist" will be removed from the checklist sheet.
rack a frack a frick a frack...

How to remove database name from SQL query

We have an MS SQL server with several databases that are of the same schema but have different data. We do this for testing different environments. We are using Crystal reports for the first time and we are having trouble changing the database location in the designer. If update the data source location to the same database server, but different database name, the data still comes from the original database used when creating the report. We look at the SQL query and it contains the database name and does not change when updating the data source. Therefore the data always comes from the database used when originally creating the report.
How can I remove the database name from the SQL query so the proper database is used when testing the report?

Hi C F
Please ensure you have followed the procedure mentioned below:
In Crystal Reports, there are two ways to set the location of the data source your report points to, depending on your connection type.
For ODBC and Native Connections:
1. On the 'Database' menu, click 'Set Datasource Location'.
2. In the 'Current Data Source' section, click the data source to be changed. You must click each individual table in the data source one by one. If the data source is a stored procedure you will not see individual tables.
NOTE In Crystal Reports 10, XIR1, and XIR2, if you are mapping from a data source such as a stored procedure where the report designer can not determine which fields should be mapped automatically, you will see a 'Mapping' dialog box where you can manually map fields, as in the procedure cited above.
3. In the 'Replace with' section, click the data source you want the report to use.
4. Click 'Update'.
5. Close the 'Set Datasource Location' window.
The report now points to the new location.
For Native Connections Only:
1. On the 'Database' menu, click 'Set Datasource Location'.
2. In the 'Current Data Source' section, click 'Properties' to expand it and right-click 'Database Name: <path to database>'.
3. Click 'Edit' and then type the path to the
new data source location.
4. Close the 'Set Datasource Location' window.
The report now points to the new location.
Regards
Girish

Removing user name from sign-in window

Upon starting Skype my username appears in the sign-in window by default.
To stop this happening skype says: when skype is not running, in Finder click on Go, select Go To Folder, enter ~/Library/Application Support/Skype, and once there delete the folder bearing the username to be removed.
This works, but only until the user with that name signs-in. Thereafter the name reappears in the sign-in window.
Can a username be removed without having to follow this procedure every time the user logs out, please.
Skype 6.15 (335)
Mac OS 10.6.8

Never mind:
https://support.skype.com/en/faq/FA10876/How-can-I-remove-my-Skype-Name-from-the-sign-in-screen-in-S...

Nokia 6300: How do I remove a name from a dictiona...

Hi
I was hoping someone knows how to remove a word/name from the word prompter on my phone. That is when I type the keys on word prompt how do I remove a name I do not want to come up
Thanks
Lee

Hi,
Try this. Messaging> Message> Options> Prediction Off.

1.1.2 Removed Contact Names From Dialing

Similar Messages

Maybe you are looking for