1.1.3 firmware and low volume (European model)??

Anyone know what happened to the max volume for the iPod-part of the iPhone since 1.1.3? The volume is so low, the iPod is pretty much unusable.... Checked all max vol settings and stuff, it just got a LOT quieter... this *****. Anyone knows a way around this, or whether this is been worked on?
Thanks,
i.

Try a Reset first by pressing and holding the Home key and Sleep/Wake or On/Off key simultaneously until you see the Apple logo and then release ignoring the slide to turn off prompt when doing so. This does not affect any data or settings.
If no change try a Restore.

Similar Messages

  • Lenovo X220 and low volume [specially in Linux]

    Hi everybody,
    i've googled this issue and found it affects other users, but didn't find any solution.
    Problem is the audio level of my Lenovo X220 is very low, in the sense that there must be zero noise in the room to be able to hear the sound. I found the same happens in Windows, but in that case there's a workaround using some setting from the Control Panel.
    I am on Chakra-Linux (but I had the same problem in Opensuse) and use pulseaudio (but the same occurred even before i switched to it).
    Any suggestion? Thanks!
    Paolo

    I use VLC media player, which allows me to boost the volume beyond the 100% listed level. I believe that when I was using an Xseries, I had pulseaudio installed at the same time as VLC.
    -JV474

  • Sound Blaster ZX mic muffled and low volume

    Hey guys!
    I'm having a bit of trouble with the microphone bundled with the ZX card. The ACM mic that is.
    I'm not sure if it's the card or the mic, but my problem is that when recording or talking on Skype/TeamSpeak, my voice if very low (even tho I have all sliders maxed out) and it's muffled. It basically sounds like I'm talking in to a pillow.
    If I connect the mic to the built-in Realtek crap on my motherboard, the sound recorded is sooo much clearer though.
    I got to have both the volume and the mic boost maxed out in the Sound Blaster control panel to even hear myself at all. If I turn the noise reduction off the sound gets a bit clearer, but the static noise gets so bad it's unbearable.
    Is my card faulty or is this a driver issue?

    I have exactly the same problem. On Teamspeak my friends were complaining that I was barely audible and sounded muffled/distorted. I tried plugging my logitech desktop mic into the soundblaster, but this didn't solve the issue - so I presume the problem is not with the ACM mic. I also tried playing with the settings in the control panel, but this had little effect. Increasing the boost to 30db improves it slightly, but then the mc also starts picking up my fans and even movement from the headphone cable. Possibly a driver issue???
    Like you I have had to resort to plugging my microphone into the onboard sound card.
    In fact I've just realised that this problem is being discussed in another thread: http://forums.creative.com/showthrea...=699346&page=2

  • Soundblaster Audigy SE static and low volume problems...

    Well, after failed attempts at getting my onboard ich5 chipset to work (which turned out to be Alsa 1.0.10 and 1.0.11 as 1.0.9 worked fine with it.) I decided to get a new soundcard. I purchased a Soundblaster Audigy SE.
    The card is detected, there are no errors, and I can actually hear sounds coming from every application that plays audio. The only problem is, there's a loud static over these sounds which makes the sounds barely audible. Loud static, low sound. I've tried several different options in alsamixer but it doesn't help the static. By the way, the only options in alsamixer are for IEC. There are no "Master" or "PCM" sliders. (Not sure if this is what these cards do or not.)
    Is there anyone out there that has this card and has been successful with it? I'm definitely having no luck with the sound thing lately. If anyone has any information or experiences with it, let me know please. I've googled around but really found nothing that helps as far adjustments and whatnot.
    NOTE: I have read of success with this card in some other distributions.

    maybe you can set it manually with amixer.
    amixer -h
    probably something like:
    amixer sset Master on
    amixer sset PCM on
    and to increase the volume:
    amixer sset Master 30
    amixer sset PCM 30
    but it prolly don't work... Have you checked out the links at the bottom of: http://wiki.archlinux.org/index.php/All … nd_at_once ?
    Also i seem to be getting louder sound from the oss emulation kernel module for some reason... maybe you can up the audio in audacios or something for the oss sound and have it affect the whole system? that's just a shot in the dark..

  • My volume button for higher volume(F12) is not working whereas mute and lower volume(F10 and F11) buttons are working, what should I do?

    My volume button for higher volume is not working

    I think there is a Windows bootcamp application that will recognize those keys. The bootcamp stuff is here: http://www.apple.com/support/bootcamp/
    I think it is called bootcamp assistant. Look here: http://www.mac-guides-and-solutions.com/boot-camp-assistant.html

  • I got my iPhone 4 in July 2010, about 3 months ago it has started being faulty. The home button hardly works and lower volume clicker doesn't work. It loses signal and only comes back when I switch it off and on and it can get laggy can I get it replaced?

    I haven't done a thing genuinely. It didn't stop working after an update or anything, it just started doing this.

    Did you buy AppleCare?  If not, you are out of warranty, so the best you can expect is to be eligible for an out of warranty replacement at your cost.  Take it into an Apple Store and they can tell you if it qualifies or not.
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

  • Lock button and lower volume button not working.

    Any advice if a button stops working? I don't know why either

    Did you try resetting/rebooting the iPad by holding down on the lock and home buttons at the same time until the Apple Logo appears on the screen. I realize that involves using the lock/sleep button, but if it is a software issue, it might help. Give it a try.
    Without knowing more about the problem, your next step might be resetting all settings and then restore the iOS software after that. If those fail to help, then a trip to an Apple Store should be the next step for you.
    It could be a hardware issue and since both buttons are on the right side of the iPad, there might be some connection between the two buttons that is causing the problem.

  • Very low volume, 845PE-MAX2BFIR

    Hi, I have just bought a MSI 845PE-MAX2 BFIR and I have connect 2 speakers to the green "line out/front speaker out", it only sounds a very low whisper sound from one of the speaker even then the volume is turn to maximum, why?
    When I was trying to changes some settings to use Xear 3D 4 channel then I needed to changes the connection of the cable to the S-bracket, and at this place I can hear the very low whisper sound from both left and right speaker, but still the volume is to low, what can be wrong?
    On the connection it says "line out/front speaker out", how to be sure it is the front speaker that I use? In the setup I have choice I have 2 table speakers to my computer but this doesnt help.
    Hope anyone can help me.
    Thanks
    /Peter

    Quote
    Originally posted by pekn
    Hi, I have just bought a MSI 845PE-MAX2 BFIR and I have connect 2 speakers to the green "line out/front speaker out", it only sounds a very low whisper sound from one of the speaker even then the volume is turn to maximum, why?
    When I was trying to changes some settings to use Xear 3D 4 channel then I needed to changes the connection of the cable to the S-bracket, and at this place I can hear the very low whisper sound from both left and right speaker, but still the volume is to low, what can be wrong?
    On the connection it says "line out/front speaker out", how to be sure it is the front speaker that I use? In the setup I have choice I have 2 table speakers to my computer but this doesnt help.
    Hope anyone can help me.
    I've got a 845PEmax2 - SR with almost the same complaint. With attached s-bracket a lot of noise and low volume and without s-bracket attached normal sound and  all the connections on the back-panel.
    I still do'nt know what is causing this trouble.
    Is there soneone from MSI who could help us with this (hardware) problem?
    herman

  • How do i change  ringtone volume to ring with low volume first and then gradually increase to the max volume ?

    how do i change  ringtone volume to ring with low volume first and then gradually increase to the max volume ? this feature was available before but is  still available now ? this is for IOS8 running on Iphone 5c.

    I've never been aware of a function like this in the past. You could create a personal ringtone that would last 30 seconds or less and set the volume on that ringtone to do that with an audio editor, such as Audacity.

  • Audio playback is clipped and has low volume

    Hi, I'm hoping that someone can help me debug my audio problems.
    The problem is that audio playback is clipped and has low volume.
    The details of my setup are as follows:
    - An onboard soundcard (ASUS M4A78LT-M-LE motherboard), identified as Intel HDA in dmesg:
    description: Audio device
    product: SBx00 Azalia (Intel HDA)
    vendor: ATI Technologies Inc
    physical id: 14.2
    bus info: pci@0000:00:14.2
    version: 00
    width: 64 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list
    configuration: driver=snd_hda_intel latency=64
    resources: irq:16 memory:f9ff4000-f9ff7fff
    - ALSA (snd_hda_intel driver) and Pulseaudio
    My ALSA mixer settings (which were used in the recording shown in this post) are at pastebin.
    The mixer settings were chosen so that all "dB gain" is 0.00 for all columns in alsamixer.
    Recording an MP3 (played at full volume) from the Stereo Mixer source in audacity I gives output which looks clipped and has low volume (link).
    This occurs with any MP3 and any other sound source (Youtube in Chromium, etc.)
    The problem does not occur when I boot into Windows XP, so it doesn't seem to be a hardware problem.
    I'm also attaching a screenshot of my alsamixer playback screen for the soundcard (link)
    Thanks for any assistance!

    Hi,
    I have the same problem since December 2011 with a similar Mainboard (Asus M4A78T-E).
    Did you resolve your problem?
    Thanks

  • I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?

    I'm trying to play MIDI files in Quicktime. It works buy the volume is very low, even with both Quicktime and computer volume on max. What can I do?

    I'm having the same issue.  After opening Audio Midi Setup in Utilities I noticed that the master volume slider of the Built-In Output is very low.  I am not able to slide to get any more level out of the system.
    Can you adjust the master volume on your system?

  • My new iPod touch (4th gen) has a significantly lower volume than my old one. I have maxed all the volumes and turned off the volume limit to no help. Can anyone help?

    My new ipod touch 4th gen has a much lower volume than my old one, i have maxed the volumes out and got rid of all volume limits which has nor helped. Can anyone help?

    Are you using the same headphones?
    Did you officially purchase the in an EU country? They require a lower max volume than the USA and other countries.

  • Incoming ring and text volume very low!

    hi, have recently noticed that when i lower volume level for music,video,games,other media, it also reduces my ringtone and notification volume level too! (even though the slider bar level is on max for ringtones,notifications.) so if for e.g i lower video volume on youtube etc, it takes my incoming call and text volume down too! this never use to happen and only noticed when i saw led missed call,text, flashing.try your own z3c?
    settings-
    sound-
    volumes-
    music,video,etc (on low)-
    ringtone&notification(max)
    ok.
    now check incoming call,text volume (very low on mine) so i have to reset music,video,games etc to max to hear incoming calls,texts but i dont want max volume for music,video,,,
    b.t.w I'm still on kitkat 4.4.4 but as i said the volume levels could be individually adjusted since out of box.
    now strange thing is my mate has the xperia sp and i checked his yesterday and he had same issue (jellybean) and because his volume level on video,games etc is low but max on ringtone,text he too misses calls and texts! (unless of course he sets max volume on the video,games). also using volume on side of phone has no effect either.
    any ideas?
    cheers.
    Solved!
    Go to Solution.

    Have you looked here?
    https://talk.sonymobile.com/t5/Xperia-Z3-Compact/Feeback-Lollipop-on-Z3-Z3-Compact/m-p/959223#U95922...
    There are common issues that people found.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • E7 - "Metallic" sound and low speaker volume. Anyo...

    I have now been using my E7 for a few days and I love it, but there is one thing that strikes me. Compared to my N8, where I have crystal clear sound in the speaker, my E7 has low volume and a "metallic" tinge to the sound. I just now made a Skype call and it was the same there. Has anyone else noticed this?
    Former owner of E90, N97 x2, E72, N8 and current owner of E7.
    Solved!
    Go to Solution.

    Seems to be a hardware issue. Replacement phone is inbound.
    Former owner of E90, N97 x2, E72, N8 and current owner of E7.

  • I have just purchased my Iphone 4s, and the volume of the sound is very low, I can hardly hear the other person. I have tried the button for higher volume, but there is no change

    I have just purcahsed my Iphone 4s, and the volume is very low, I can hardly hear the other person talk. I have tried the botton for higher volume, but it doesn`t work. Can anybody give me an answer to what is wrong?

    Did u take out the screen protection?

Maybe you are looking for