1.1.4 won't finish

Right now i am trying to update my iphones software. i downloaded the 1.1.4, it says preparing iphone for software update, but it hasn't done anything for an hour. an suggestions?

i had the same problem, never used jailbrake on my phone. i had to restart computer... connected again and it said iphone cannot be restored... connected AGAIN and it finally worked. it restored with latest version.

Similar Messages

  • Snow Leopard (10.6.8) Web Browser, App Store, iTunes Store image won't finish loading.

    Hello,
    I've recently upgraded from Leopard to Snow Leopard by clean installing. Once I upgraded to Snow Leopard (10.6.3) everything seemed to work perfectly except for the new keyboard that I purchased (requires upgrade to 10.6.8). So as I upgraded to 10.6.8 by "Software Update…".
    Once the update was completed and the machine restarted I've noticed when I opened opened couple of common sites in Safari (such as: Flickr, YouTube, and Amazon) and some of the images won't finish loading with a "?" in the middle where the image would be and browser assumes that the site was done loading. First I thought this was a refresh problem so I hit refresh on the browser but nothing really happened. I thought this was strange so I decided to download Google Chrome and Firefox to try it out as well. Same situation as well… Then I opened  the App Store and iTunes Store and the same things happened there as well. I'm assuming that all these images exists online so anything that access the web to load images will just crap out. One odd thing is that this problem don't seem to happen on any of the sites on Apple when I view it in the web browsers.
    I couldn't figure out the reason so I decided to reinstall Snow Leopard (10.6.3) again by cleaning out the hard drives as before. Once it finished installing I opened up iTunes Store and Safari and the images loads fine. So went ahead (crossing my fingers) to "Software Updates…" to 10.6.8 and the the problem happened again.
    I naively went ahead and tried to clean installing it again, thinking "Third time is the charm!" But same situation once I upgrade to 10.6.8. After the third time I let the browser sit there after it didn't load those images. I waited about five minutes and hit refresh and the images loaded. This happened the same with App Store and iTunes Store images as well. This is very odd because my interment connection hasn't been a changed before I upgraded to 10.6.8. Seems like browsers just cuts off the loading time of the whatever that's lagging instead on that site.
    Is there a solution in the preferences for this or is this some kind of a bug that I'm having with my OS disc or network card? I don't think this has nothing to do with my modem or my interment service because it was working fine before I upgraded to 10.6.8.

    I get that same problem too-you could try checking your network settings, release and renew your IP address, see if that helps. There is a tweaking menu you can get in Firefox that can help somewhat (google Firefox tweaks) but you'd have to raise the hood in FF and tinker a bit, but it does help. How much RAM do you have on your Mac Pro?, also update your Java and shockwave
    sorry I can't be of more help
    Jon B

  • My dad has a brand new iMac. If he quits an app, this window closes, but the app won't finish shutting down, Force quitting does not work.  Once another app is opened, it will not close either.  Now none of the apps are responding. Any ideas?

    My dad has a brand new iMac. If he quits an app, this window closes, but the app won't finish shutting down, Force quitting does not work.  Once another app is opened, it will not close either.  Now none of the apps on the dock are responding. I asked him to click on the apple, and drop down to "About this Mac", but that wouldn't open either. Any ideas?  If I was at his house, I would call Apple Care in a heartbeat, but am home with my sick daughter,,,  Thanks!

    For starters, have him open Disk Utility in Applications>Utilities, select the volume (the indented listing) and Verify Disk. If it reports any problems, have him try a Safe Boot by holding the Shift key at startup. This boot will take much longer than usual. It's checking and trying to repair the drive directory, if possible. Once in Safe Boot, have him repair Permissions.
    For other Disk repair remedies see
    http://support.apple.com/kb/TS1417
    Also, have him try a PRAM Reset. At the startup chime, hold down CMD-Option-P-R together, listen for two more chimes, total three, then let go to finish booting.
    Also, is he running any AV? If so, have him uninstall it. It might be responsible for this behavior. (There are no viruses for OS X.)

  • Downloaded new ios7 and new itunes 11.1 and now iphone 4 won't finish syncing - just stays on last step and never finishes or cancels on its own. Tried reinstalling itunes with no success.

    Downloaded new ios7 and new itunes 11.1 and now iphone 4 won't finish syncing - just stays on last step and never finishes or cancels on its own. Tried reinstalling itunes with no success.

    I have the same problem.. latest version of iTunes (11.1.5) and latest version of ios (7.1) but it gets stuck at "waiting for changes to be applied" and I can't cancel the sync manually. It doesn't cancel on it's own either (at least not the 8 hours over night that it was syncing) and if I unmount the phone then the phone keeps the sync going (the little spinning arrows in the upper left corner) and doesn't recognize that it's been disconnected..
    I've tried restoring the phone (with little success, managed to get one more song on there) and syncing over wi-fi but nothing seems to work. Any thoughts, anyone?

  • I installed Snow Leopard on my Macbook. Now it won't finish bootup.

    I installed Snow Leopard on my Macbook. It said the install completed perfectly, but now it won't finish booting up.
    It just sits on the start-up window with the spinning wheel and the apple logo. I can't even eject the install disk or anything. I waited for 7 hours before giving up and just turning it off. I can't bring up any options or anything... am I done for?

    http://support.apple.com/kb/HT2674
    also see similar questiion answered by forum members
    https://discussions.apple.com/message/17943137#17943137

  • TS1424 My film I rented from iTunes has frozen half way through downloading and won't finish downloading, any ideas?

    My film I rented from iTunes has frozen half way through downloading and won't finish downloading, any ideas?

    TRy to close itunes by double tapping the home button then slide up all of the open apps and try again.
    another option is to turn off your ipad, logout from your itunes account and try again downloading the movie. If it still gives you error, call apple support and ask for itunes agent to see if there is something wrong with the movie you are trying to download

  • Tried to download us calendar.  But it stopped and won't finish downloading! Can I have help please?

    Tried to download us calendar to my iPad & iPhone.  But it stopped and won't finish downloading! Can I have help please?
    I have downloaded Japanese calendar to my calendar already.  Can't I download more than one holiday calendar?

    Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.

  • HT201272 my movie won't finish downloading

    I just bought a movie through iTunes and it won't finish downloading on my iPad....anyone know why?

    Check your purchase history to be sure you have purchased it.
    You can click Store>Check for Available downloads to see if it is still waiting to download.
    If not, then report the issue. Apple should resolve in a day or less:
    http://support.apple.com/kb/HT1933

  • I'm having trouble with my computer, I boot it up and within a few minutes it freezes and I have to restart it, I tried updating it to the latest mavericks but it won't finish the installation it's stuck at the end, what can I do to fix this?

    As stated I'm having trouble with my computer, I boot it up and within a few minutes it freezes and I have to restart it, I tried updating it to the latest mavericks but it won't finish the installation it's stuck at the end, what can I do to fix this? I need it for homework tonight.

    Crowntheme,
    you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still freeze after a few minutes?

  • Website won't finish publishing!

    My girlfriend is trying to publish her website to Mobile Me using iWeb '08, but every time she tries, the progress indicator in the iWeb window advances to the last sliver of the "wheel," and won't go any further. It doesn't give any error message or indication that anything is wrong, but won't finish the publication. We've already tried the plist/cache clearing fix, and that does make the upload run faster, but it still freezes on that last sliver of the progress wheel. Any suggestions?

    Nevermind, the site finally went up. It just took forever for that last little bit to publish; a far cry from the "few minutes" the tutorial video described.

  • Photoshop Elements 12 Won't Finish Installing

    I have had Elements 12 running previously on my machine. I have just upgraded the hard drive and am in the process of reinstalling. My version is an upgrade to V11. This installed correctly and is running. Whenever I try to install V12 it gets right to the end and install an icon on the desktop and then just runs. I have left it for 3 hours and it still won't finish the installation. Any help please?
    Thanks

    Try installing from a different source by using the link below for the free trial. After installation you can validate the product with your serial number. Some users find this download method more intuitive than the Akamai method or using a DVD. After you click the download button, you start by downloading/updating the Adobe Download Assistant. Then select the PSE12 product and start download and installation.
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997

  • No matter what I do InDesign won't finish installing. I keep getting error 49.

    No matter what I do InDesign won't finish installing. I keep getting error 49 but I can't do anything about it.

    Brodier24177022 please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve Error 49.

  • Itunes stoped seeing my ipod touch so I uninstaled and reinstalled itunes and now it won't finish opening

    iTunes stopped seeing my iPod touch so I uninstalled and reinstalled iTunes and now it won't finish opening.  It takes a long time but eventually it looks like iTunes has loaded but it never lets me do anything and stays unresponsive. What now?

    Hi there AskMe1313,
    I have an article for you that will help you troubleshoot this issue:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    After completing these steps, you can use this article to help you resolve the issue with the iPod not being recognized by your computer:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Mac Pro gets stuck on the grey screen and won't finish booting

    I have a Mac Pro 1, 1 recently (successfully) upgraded to snow leopard that gets stuck on the grey screen with the spinning rainbow cursor (after the apple logo and brief blue screen) and won't finish booting up. This happened after my computer froze up and I had to force quit.  I checked out the forums and I tried all the all the suggestions (like disconnecting peripherals) and appropriate disk utilities, saw no errors with the HD reported, and had no trouble doing a safe boot  (everything works o.k. there) or starting up from the software disk to perform the repairs.  I did notice that during the repair permissions command, it gets stuck in the last few minutes, the CD starts to chug along, and everything freezes and I have to force quit.  This happens every time I try it.  I eventually backed everything up, erased the HD and reinstalled the OS, reset PRAM and NVRAM, but I'm still getting the grey screen on restart.  Tech tool deluxe reports a "fail" on the video RAM, but everything else seems to check out.  Could it be a graphics card issue?   I did notice some funky visual glitches occurring prior to the breakdown.  Any other ideas?

    I wouldn't trust Apple Disk Utility to do a hard drive repair, but I would go with TechTool Pro 5/6 if you have that instead of Disk Warrior from Alsoft.
    Clone the drive, though you should have some bootable backup clones already; repair the clone; then boot and work from that drive. Always have a working copy of the system.
    And off load all your data to other drives.

  • I downloaded updates for "Office for Mac" a few days ago and it won't finish.  It keeps saying I have to close Safari, Microsoft Word and Microsoft Powerpoint and I don't have any of these open.  Can anybody help me?

    I downloaded updates for "Office for Mac" a few days ago and it won't finish.  It keeps saying I have to close Safari, Microsoft Word and Microsoft Powerpoint and I don't have any of these open.  Can anybody help me?

    Hi Anne,
    Did you do this through one of the Office app updates, or did you download it directly from the Microsoft website?
    Whichever way you tried it, I would try it the opposite way this time, although simply repeating what you did before may also work.

  • 3.0 Won't Finish. Stuck in iTunes Store Error (-4)

    Are they crashed or what? My 2g phone won't finish up and have the emergency phone only on the screen. I try again but, no luck. Anyone Else???

    I got that error also. Due to the extreme amount of people downloading we seem to all get stuck.
    I kept docking and undocking my phone until it snuck in during a space in the 'line' of people downloading.
    My phone is running great now

Maybe you are looking for

  • Change Tracking in SQL 2012 - Behavior Change

    Hi, We observed some change in behavior for Change Tracking feature in SQL 2012 Express. Sequence is as follows, CT is not enabled at DB level. (Of course at table level too) Created and populated table CTTEST with some rows, say 10 rows Enabled CT a

  • Survey Problem

    Hi I face an issue in "Survey" tile in a Service Order.I have a survey "Customer Responsibilites" which has been changed in CRM and brought down to mobile. The survey is displayed fine(with the new changes) in the "Survey Details" tile. I then click

  • Do you find CMSS-3D better than Dolby Prologic

    Hi! as you all know both CMSS-3D and Dolby Prologic 2 upmixes stereo and mono to 5. surround sound from Mp3 and movies as well. However, I find some interesting findings lately; I know that many of you might argue with this but I believe CMSS-3D outd

  • How to enable "Change characters to Chinese Traditional" and "Change characters into Chinese Simplified" ?

    I am a Taiwanese and usually use the feature of "Change characters into Chinese Traditional" or "Change characters into Chinese simplified" . Before I update Pages/Numbers/Keynotes , these features works well . I can transfer Chinese characters into

  • Migrate from Prime LMS to Prime Infrastructure

    I'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2.  I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration