1:1 previews not stored?

I am beginning to suspect that LR v1.0 does not store its 1:1 previews.
I have set it up to create Standard Size previews on Import at 1024 res. and have specifically requested 1:1 previews to be rendered for a selection of images. Then, in the Develop module, I switch from one of these images to another and then back again (for me, a common procedure as I compare two images under various kinds of Develop treatments). The result? LR takes 15-20 seconds to Load each image every time, even though it presumably already has a 1:1 rendering. Surely the loading should be pretty well instantaneous if it has the rendered images already?
I know my system is quite old: AMD Athlon 1800+ processor, Windows XP (SP2 etc), 1 Gig RAM, 17" screen, but that does not seem to be the point here, does it?
I have searched the Forum for a similar query and, although there are plenty referring to a lack of speed/performance, none seem to raise quite this point. Your thoughts, anyone?

> Is there a good reason, that you know of, why it does this?
The assumption is, you are in Develop because you intend to make changes. Any changes will require a rendering anyway.
I can change images in Develop at 5 per second. That is just for a pixelated preview, but it's plenty to see if I'm on the right image. If I need to make changes, I can do that before the image finishes rendering and rendering will continue while the changes are in progress. Therefore, this time doesn't actually slow down my workflow unless I'm making sharpening and/or NR changes at 1:1.
Rendering RAW data is computationally expensive and there's no real way around it. Develop is pretty smart in that it only renders that which is visible and it renders downsampled RAW data where that approach makes sense.
If you really need this particular bit of LR to be faster, I'd suggest more powerful hardware. Your hardware is adequate but not impressive. If I were you, I'd try to work with it as I do.

Similar Messages

Image Details and icon preview not coming up in OSX

I converted a few of my layered Tiff files to Photoshop PSD format to reduce the file size, and now the image size that normally appears under the image icon in the Finder (eg 2068 x 3471, when you have ticked Show Info in the Command J dialog box) is no longer there. I regularly refer to the image size info. It's very useful to me.
Is this a problem with Photoshop not storing the file size in a way that OSX can read? Can I do something in OSX to have PSD files show this info - and also, to have the PSD icon show an actual preview? There is nor problem with Tiff or jpeg files.

Photoshop files never show the size information in an icon view window, although the Finder should draw a custom thumbnail if you have that preference set in View options for the window. If you have the preference in Photoshop itself set to make custom thumbs it will do so, and then the thumb will be visible in all window views regardless of the Finder's window option preference. Why the size doesn't display in icon view I don't know. The Finder CAN read the information: if you do a GetInfo on the Photoshop file, or have the window set for Column view with the option to show a preview column the pixel dimensions ARE shown. I would say it is some sort of oversight in the Finder's code that it doesn't display the dimensions in icon view.
Francine
Francine
Schwieder

Aperture & iPhoto metadata when images NOT stored in iPhoto

Thinking of "upgrading" to Aperture from iPhoto '11 - still want to use iPhoto for organization but Aperture for hopefully better editing capabilities, etc.
Have 30,000+ images with keywords, etc. in iPhoto; the image files are NOT stored IN iPhoto, i.e., they are organized in folders external to iPhoto's library. The iPhoto library file best I can tell stores thumbnails and keyword metadata, etc.
I'd like to use Aperture and have access to all of iPhoto's keywords, etc. but to use the original photo files.
Can Aperture be setup to work this way? i.e., to pull in the 30,000+ photos' keywords yet reference the same originals that iPhoto is referencing?
I don't want to duplicate the 30,000+ originals... In all likelihood I'd only ever want to manipulate a small percentage of the total image library in Aperture.
Any suggestions appreciated!
Alex

Alexander Mcleod wrote:
Thank you for taking the time to reply...
re: "Basically to edit an image, stored in iPhoto, in Aperture you would have to export the image from iPhoto import into Aperture modify it export it out of Aperture and import it back into iPhoto."
My point is that in my case the images are NOT *stored* IN iPhoto...
Yes I understand, your iPhoto library is setup using referenced masters, the termed used when the master file is stored outside of the programs database. And you could setup Aperture in the same way and they would both be pointing to the same master file, external to both programs databases.
But here's here's the kicker: The master file *is never modified* by either program. I believe iPhoto makes a copy of the master when you apply adjustments (someone with a greater understanding of iPhoto can correct me here) how it does it isn't important what is important is that he master isn't modified; Aperture also leaves the master alone. It records the adjustments you make as a stream on instructions and applies those to the master when you want to create an adjusted image. What you see (normally) in Aperture's views are previews of the adjusted image. So changes you make in Aperture won't be seen in iPhoto because iPhoto is looking at the original master file, not Aperture's adjusted version.
Now you can share the preview from Aperture with iPhoto, but at this point you basically have the adjusted image in two places.
And in reference to the other response that suggests that iPhoto and Aperture use different databases, I'd completely expect that to be the case. What I'm wondering about is can Aperture initialize its database from iPhoto's database; i.e., create its equivalent to iPhoto's "library" file (where all the iPhoto metadata is stored) from iPhoto's AND like iPhoto reference the original files in their original location.
Yes Aperture can initialize a database of its own based on the iPhoto library and that library can be setup to use referenced masters, see above.
I don't see why I'd need to 'export' any image from iPhoto (unless of course I'd "edited" it in iPhoto - in which case the *modified* file IS I think stored IN iPhoto's library) but that's my point... I don't WANT to edit the files with iPhoto... I want to edit the files with Aperture.
You're right you won't need to export from iPhoto if you setup both with referenced masters. But like I said above to get back to iPhoto you will have to export from Aperture unless you can live with using the previews in iPhoto. But again you will basically have two identical library structures, at least at start, as time goes on they will diverge.
I hope this better clarifies what I'm trying to explain.
It does, I hope my reply also helps explain the difficulties with this setup and why it's not as cut and dry as it first appears.
I have read *many* other posts that point out what you're pointing out but they all seem to make assumptions about wanting to modify files in Aperture which were previously *modified* in iPhoto. The unmodified "original" photos (assuming both iPhoto and Aperture have the ability that iPhoto has to reference the original files from a location *external* to iPhoto) are then by definition are already shared between iPhoto and Aperture so there's no need to 'export' from one to the other, no?
As I've said whats shared is the original unmodified master image. Once either program modifies it it is no longer shared.

Gr/ir slip field value is not stored in table mkpf..!!

dear sap gurus,
    i have a typical problem.. i am doing Transfer posting from one storage location to another. using MB1B with 311 mov type.. and mentioning some values in the gr/ir slip field.. but system is not storing the value in table..
Can any one say how to solve this.. if i use MIGO_TR then its storinghte value i mentioned in MKPF table..
Regard,
Manu

Hi Manu,
This GR/GI slip number has only been designed for use in those countries (for example, Italy) whose legislation requires specification of this number for goods that leave the plant and are transported on public roads. In other countries, the material document number printed on the GR/GI slip (in the standard system) is usually sufficient. To enter external documents, you can use the field Material slip or Delivery note.
If still wants to use this field you are required make relevent settings in config.
Please go to transaction OMC1.
There you will find 4 push buttons.
   1. Activation of GR/IR slip for plant.
   2. Number range grouping code.
   3. Intervals for number range.
   4. Object(here you are assigning the number range for the plant, storage location and movement type.
This will allow you to store GR/IR slip number in MKPF with trx. MB1B
Regards
Mauro

Data not storing in Custom infotype build with tab strips

Hi All,
I have created one custom infotype 9030,
With screen 2000.
which is having tab strips, I have build the screens refering to p9030-zztest its not storing in database.
where I am doing wrong...please let me know what should be done in this case.
Regards
Satish.v

Hi,
Checkout the below link :
<link to blacklisted site removed by moderator>
Shailaja Ainala.
Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

In FTP server file not storing in proper order when 'FTP_R3_TO_SERVER'

Dear ,
when i used FTP_R3_TO_SERVER to download data in FTP server
i checked in FTP server file is not storing in proper order in FTP server . plz help how to get the file in proper order .it urgent . full points must be given. i given code below .
DATA : BEGIN OF iresult OCCURS 5,
rec(450),
END OF iresult ,
DATA :
dest LIKE rfcdes-rfcdest VALUE 'SAPFTP',
compress TYPE c VALUE 'N',
host(64) TYPE c.
DATA: hdl TYPE i.
DATA: BEGIN OF result OCCURS 0,
line(100) TYPE c,
END OF result.
DATA : key TYPE i VALUE 26101957 ,
dstlen TYPE i,
blob_length TYPE i.
host = p_host .
DESCRIBE FIELD p_password LENGTH dstlen IN CHARACTER MODE.
CALL 'AB_RFC_X_SCRAMBLE_STRING'
ID 'SOURCE' FIELD p_password ID 'KEY' FIELD key
ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD p_password
ID 'DSTLEN' FIELD dstlen.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
user = p_user
password = p_password
host = host
rfc_destination = dest
IMPORTING
handle = hdl
EXCEPTIONS
not_connected = 1
OTHERS = 2.
IF sy-subrc = 0.
CONCATENATE 'cd' ftppath INTO ftppath SEPARATED BY space .
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
handle = hdl
command = ftppath
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
IF sy-subrc = 0 .
CLEAR result .
REFRESH result .
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
handle = hdl
command = 'ascii'
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
IF sy-subrc = 0 .
DESCRIBE TABLE iresult LINES lines.
blob_length = lines * width .
clear : lines.
Delete the existing file
CONCATENATE 'del' ftpfile INTO delfile SEPARATED BY SPACE.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
handle = hdl
command = delfile
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
*End of deleting the existing file
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
handle = hdl
fname = ftpfile
blob_length = blob_length
TABLES
blob = iresult
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF sy-subrc 0 .
WRITE 'Error in writing file to ftp' .
ELSE.
WRITE 'File downloaded on the ftp server successfully'.
ENDIF.
ENDIF.
ELSE.
WRITE : 'Path on ftp not found : ' , ftppath .
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
handle = hdl.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
destination = 'SAPFTP'
EXCEPTIONS
OTHERS = 1.
ELSE.
WRITE 'Could not connect to ftp' .
ENDIF.
ENDFORM. " FTPFINANCEACCESS_DOWNLOAD
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'PASSWORD'.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Edited by: manoj kv on Feb 27, 2008 12:55 PM
Edited by: manoj kv on Feb 28, 2008 5:37 AM
Edited by: manoj kv on Feb 28, 2008 5:39 AM
Edited by: manoj kv on Mar 5, 2008 2:15 PM
Edited by: manoj kv on Mar 7, 2008 12:51 PM

Hello,
Did you try to put 'X' to the parameter CHARACTER_MODE.
Hope it will help you
Olivier

Session variable not storing in custom trigger

I have a custom trigger in which I want to store a session variable , so i can use the value in the insert transaction which happens after. But for some reason the session variable is not stored, resulting in the data not being stored.
any clues would help.
rudi
here are the relevant code:
//start Trigger_Custom_Subject_Mentor trigger
function Trigger_Custom_Subject_Mentor(&$tNG) {
//Check subject exists
@session_start();
$_SESSION['sb_id'] = $subject_id;
//end Trigger_Custom_Subject_Mentor trigger
// Make an insert transaction instance
$ins_share = new tNG_insert($conn_smart);
$tNGs->addTransaction($ins_share);
// Register triggers
$ins_share->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "POST", "KT_Insert1");
$ins_share->registerTrigger("END", "Trigger_Redirect", 90);
// Add columns
$ins_share->setTable("`share`");
$ins_share->addColumn("share_item", "NUMERIC_TYPE", "POST", "share_item");
$ins_share->addColumn("share_subject", "NUMERIC_TYPE", "SESSION", "sb_id");
$ins_share->setPrimaryKey("share_id", "NUMERIC_TYPE");
// Register triggers
$ins_share->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "POST", "KT_Insert1");
$ins_share->registerTrigger("BEFORE", "Trigger_Custom_Subject_Mentor", 50);
$ins_share->registerTrigger("END", "Trigger_Default_Redirect", 99, "share.php?item_id={share_item}");

hi User,
1) Pull a dummy column in Fx use the Session variable --->(Variable -->session )
2) Next, goto narrative view in Narrative view section use @1
3) If u want you can hide the column that we created in criteria section

I broke my old 4S and purchased the same one. I am trying to back up my contacts and notes stored on iCloud w/out wiping everything out. How do I go about doing so? I want to retrieve what I backed up priviously earlier in the month.

I had to buy a new phone b/c my last one broke before my 2 year contract was up. I have another 4S. I use iCloud and backed up my old phone earlier this month. I am wanting to upload my contacts & notes stored on iCloud to my new phone. How can I do this from the back up on my home computer before retrieving the backup from iCloud? I am not wanting to wipe everything out on accident..

Sorry but I'm a bit confused about what you're asking. You seem to be indicating that you have an iCloud backup as well as a backup on your computer but it isn't clear to me what you are trying to do with them. Can you explain this?

Ical not storing all data & cant initialize lists

okay so im trying to store all ical data in seperate lists for hours months years and the actual event ect....it worked fine for a while but now its not storing all the events....and then when it did it would carry over from one run to another. I figured out that was probably because they were properties but when i make the lists global i get a "this variable is not initialized" problem. and even if i somehow managed to fix that its still not reading in all the data. ive been at this for 2 hours and cant see the problem. please help:
variable defs:
(*System Variables*)
global running_processes
global _weekday
global _date
global _month
global _year
global _hours
global _minutes
global _seconds
global time_ofday
(*iCal Variables*)
global iCal_Open
global iCal_Run
global iCal_Calendars
global iCal_Events
global icaleventsstore
global icaleventslast
global iCalEvents_StartMonth
global iCalEvents_StartDate
global iCalEvents_Startyear
global iCalEvents_Starthours
global iCalEvents_StartMinutes
global iCalEvents_EndMonth
global iCalEvents_EndDate
global iCalEvents_Endyear
global iCalEvents_Endhours
global iCalEvents_EndMinutes
global iCalEventsStart
global iCalEventsEnd
code to split up dates and date:
on Ref_Events()
proc()
if running_processes contains "iCal" then
(*if iCal is open do the code as normal*)
set iCal_Run to 1
set iCal_Open to 1
tell application "iCal"
set iCalEventsStart to the start date of every event in every calendar
set iCalEventsEnd to the end date of every event in every calendar
set iCal_Events to the summary of every event in every calendar
set x to 1 --holds calendar to be used
set y to 1 --holds event to be used
repeat while x is less than or equal to the number of items in iCal_Events
repeat while y is less than or equal to the number of items in item x of iCal_Events
get item y in item x in iCalEventsStart as string
set temp_date to the result
--start dates
set iCalEvents_StartMonth to iCalEvents_StartMonth & the second word of temp_date
set iCalEvents_StartDate to iCalEvents_StartDate & the third word of temp_date
set iCalEvents_Startyear to iCalEvents_Startyear & the fourth word of temp_date
set iCalEvents_Starthours to iCalEvents_Starthours & the fifth word of temp_date
set iCalEvents_StartMinutes to iCalEvents_StartMinutes & the sixth word of temp_date
--end dates
get item y in item x in iCalEventsEnd as string
set temp_date to the result
set iCalEvents_EndMonth to iCalEvents_EndMonth & the second word of temp_date
set iCalEvents_EndDate to iCalEvents_EndDate & the third word of temp_date
set iCalEvents_Endyear to iCalEvents_Endyear & the fourth word of temp_date
set iCalEvents_Endhours to iCalEvents_Endhours & the fifth word of temp_date
set iCalEvents_EndMinutes to iCalEvents_EndMinutes & the sixth word of temp_date
--event description
get item y in item x in iCal_Events as string
set temp_event to the result as string
set icaleventsstore to icaleventsstore & temp_event
set y to y + 1
end repeat
set x to x + 1
end repeat
end tell
else
(*if iCal is not open do the code then close it*)
if iCal_Run is 0 then
set iCal_Run to 1
tell application "iCal"
set iCalEventsStart to the start date of every event in every calendar
set iCalEventsEnd to the end date of every event in every calendar
set x to 1 --holds calendar to be used
set y to 1 --holds event to be used
repeat while x is less than or equal to the number of items in iCalEventsStart
repeat while y is less than or equal to the number of items in item x of iCalEventsStart
get item y in item x in iCalEventsStart as string
set temp_date to the result
--start dates
set iCalEvents_StartMonth to iCalEvents_StartMonth & the second word of temp_date
set iCalEvents_StartDate to iCalEvents_StartDate & the third word of temp_date
set iCalEvents_Startyear to iCalEvents_Startyear & the fourth word of temp_date
set iCalEvents_Starthours to iCalEvents_Starthours & the fifth word of temp_date
set iCalEvents_StartMinutes to iCalEvents_StartMinutes & the sixth word of temp_date
--end dates
get item y in item x in iCalEventsEnd as string
set temp_date to the result
set iCalEvents_EndMonth to iCalEvents_EndMonth & the second word of temp_date
set iCalEvents_EndDate to iCalEvents_EndDate & the third word of temp_date
set iCalEvents_Endyear to iCalEvents_Endyear & the fourth word of temp_date
set iCalEvents_Endhours to iCalEvents_Endhours & the fifth word of temp_date
set iCalEvents_EndMinutes to iCalEvents_EndMinutes & the sixth word of temp_date
--event description
get item y in item x in iCal_Events as string
set temp_event to the result as string
set icaleventsstore to icaleventsstore & temp_event
set y to y + 1
end repeat
set x to x + 1
end repeat
end tell
quit application "iCal"
end if
end if
if icaleventsstore is not icaleventslast then
say "new events stored in I Cal. Would you Like to View a List of all events?"
display dialog "View List of Events?" buttons {"Yes", "No"} default button 2
if the button returned of the result is "Yes" then
choose from list icaleventsstore with prompt "All the Current Events"
else
-- action for 2nd button goes here
end if
set icaleventslast to icaleventsstore
end if
end Ref_Events

You need to be careful when using conditional statements to set global variables (the global declaration does not set any values). I can't tell from the just the one handler you posted, but an example would be the iCal_Run variable - unless it is declared somewhere else, it won't have a value if there isn't an iCal process.

How do I change my incoming calls to view caller's phone number instead of name? This is for numbers not stored in my contacts (i.e. Unknown)

How do I change my incoming call view to see the "phone number" instead of seeing "Unknown" for contacts who are not stored in my phone? Whenever a call comes in it says unknow instead on the phone number that is calling.

You need to set up the accounts in System Preferences/Accounts, then activate Fast User Switching.
That way you can quickly log in to your own account - then back to his.
You should obviously have different passwords.

Sent mail occasionally not stored in sent folder

Hi,
we encountered weird problem with OS X server behaviour where user sent email via smtp server and it is not stored in his/her mailbox.
This issue is happening time to time I would say almost randomly.
Do you have any idea why this is happening and where is the sent mail?
I picked a case and gathered relevant logs:
Thank you in advance
Server OS 10.10.1 server 4.0.3
Amavis.log
Apr 1 17:10:28 smtp.server.tld /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[99344]: (99344-14) ESMTP:[127.0.0.1]:10024 /Library/Server/Mail/Data/scanner/amavis/tmp/amavis-20150401T162847-99344-AfuMa tsy: <[email protected]> -> <[email protected]>,<[email protected]> SIZE=42753 Received: from smtp.server.tld ([127.0.0.1]) by localhost (smtp.server.tld [127.0.0.1]) (amavisd-new, port 10024) with ESMTP; Wed, 1 Apr 2015 17:10:28 +0200 (CEST)
Apr 1 17:10:28 smtp.server.tld /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[99344]: (99344-14) Checking: JjUbZ6HVURz7 [31.7.245.146] <[email protected]> -> <[email protected]>,<[email protected]>
Apr 1 17:10:28 smtp.server.tld /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[99344]: (99344-14) Open relay? Nonlocal recips but not originating: [email protected]
Apr 1 17:10:28 smtp.server.tld /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[99344]: (99344-14) FWD from <[email protected]> -> <[email protected]>,<[email protected]>,BODY=7BIT 250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 920CA6DC5A3
Apr 1 17:10:28 smtp.server.tld /Applications/Server.app/Contents/ServerRoot/usr/bin/amavisd[99344]: (99344-14) Passed CLEAN {RelayedInbound,RelayedOpenRelay}, [31.7.245.146]:47116 [31.7.245.146] <[email protected]> -> <[email protected]>,<[email protected]>, Queue-ID: 1D4EE6DC589, Message-ID: <[email protected]>, mail_id: JjUbZ6HVURz7, Hits: 0.732, size: 42753, queued_as: 920CA6DC5A3, 493 ms
mail.log
Apr 1 17:10:28 smtp.server.tld postfix/smtp[1487]: 1D4EE6DC589: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.55, delays=0.03/0.02/0/0.49, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 920CA6DC5A3)
Apr 1 17:10:36 smtp.server.tld postfix/smtp[1493]: 920CA6DC5A3: to=<[email protected]>, relay=mail.receiverserver.com[11.22.33.44]:25, delay=7.4, delays=0.06/0.03/0.37/7, dsn=2.0.0, status=sent (250 OK id=1YdKHr-0006of-5z)
filter na 920CA6DC5A3
Apr 1 17:10:28 smtp.server.tld postfix/smtpd[1491]: 920CA6DC5A3: client=localhost[127.0.0.1]
Apr 1 17:10:28 smtp.server.tld postfix/cleanup[1486]: 920CA6DC5A3: message-id=<[email protected]>
Apr 1 17:10:28 smtp.server.tld postfix/qmgr[215]: 920CA6DC5A3: from=<[email protected]>, size=43163, nrcpt=2 (queue active)
Apr 1 17:10:28 smtp.server.tld postfix/smtp[1487]: 1D4EE6DC589: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.55, delays=0.03/0.02/0/0.49, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 920CA6DC5A3)
Apr 1 17:10:28 smtp.server.tld postfix/smtp[1487]: 1D4EE6DC589: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.55, delays=0.03/0.02/0/0.49, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 920CA6DC5A3)
Apr 1 17:10:28 smtp.server.tld postfix/pipe[1495]: 920CA6DC5A3: to=<[email protected]>, orig_to=<[email protected]>, relay=dovecot, delay=0.16, delays=0.06/0.01/0/0.1, dsn=2.0.0, status=sent (delivered via dovecot service)
Apr 1 17:10:36 smtp.server.tld postfix/smtp[1493]: 920CA6DC5A3: to=<[email protected]>, relay=mail.receiverserver.com[11.22.33.44]:25, delay=7.4, delays=0.06/0.03/0.37/7, dsn=2.0.0, status=sent (250 OK id=1YdKHr-0006of-5z)
Apr 1 17:10:36 smtp.server.tld postfix/qmgr[215]: 920CA6DC5A3: removed

I have a few users reporting the same problem. It is inconsistent and I have not found a way to reproduce it at will.
Our users have been BCC them selves so they have a copy to move to sent it if is not there.
They have also reported mail being copied to the Send and Drafts folders when they send it.
When they login from a different mail client the folders are the same. So I am assuming the problem is server side? Or at least the result is.
Is it the clients job to ask the server to move the mail from outbox to the sent folder?
I think this is where the problem is occurring.
We were looking at it this morning and moving mail around from Drafts to Trash and Sent. Mostly it moved around fine but there was one instance where we moved mail from Drafts to Trash.
We then quit and opened mail again (we waited until the activity window was empty)
The mail we moved to Trash was gone. But a new mail was in Drafts that had been sent earlier that morning. A copy was still in the Sent folder.
We could not reproduce this.
We also have roundcube but it is the mail.app clients that notice the problems. They are the majority so it is to be expected.
Clients OS X 10.10.2, mail.app 8.2
Server 4.0.3, OS X 10.10.2, Roundcube 1.0.3 (Topicdesk Roundcube Installer 1.0.3a)

Problem - Values are not stored into Tables when value are accepted from us

// jsp code
<%@ page import="java.util.Enumeration" %>
<%@ page import="java.util.Vector" %>
<%@ page import="java.util.*" %>
<%@ page import="java.lang.*" %>
<%@ page import="java.sql.*" %>
<%@ page import="beans.register2" %>
<jsp:useBean id="registerbn" scope= "session" class="beans.register2" />
<% String base = (String) session.getAttribute("base");
registerbn.setDburl((String)session.getAttribute("dbUrl"));
registerbn.setDbuser((String)session.getAttribute("dbUserName"));
registerbn.setDbpasswd((String)session.getAttribute("dbPassword"));
System.out.println("Inside jsp - setMembers of promotion successful");
// registerbn.setMembers1();
System.out.println("after setting");
%>
<%
String action=request.getParameter("action");
%>
<HTML>
<HEAD>
<TITLE> TIFR INTRANET </TITLE>
</HEAD>
<HEAD>
<script language="JavaScript1.2">
//some validations functions
</script>
</head>
<body>
<table valign="top" align="top">
<TR>
<TD COLSPAN="100%"><jsp:include page="Header.jsp" flush="true"/></TD>
</TR>
<TR>
<TD align="top" valign="top"><jsp:include page="menu.jsp" flush="true"/>
<font face="arial" size="1">
site developed by ADPCell TIFR
</font>
</td>
<td>
<table cellpadding="2" cellspacing="3" width="40%">
<form method="post" action="./beans.register2">
<td width="40" align="center"
<font face="arial" size="5" align="right">
<b>
Registration <hr> </hr>
</b>
</font>
<br>
</td>
<tr valign="center" width="80%">
<td width="40%">
<b><font face="Arial" size="2">IdCode </b> </font>
</td>
<td width="40%">
<b><font face="Arial" size="2">
<input type="text" name="idcode" size="6" style="border-style:solid" value="">
</font></b>
</td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">User </font></B></td>
<td width="40%">
<input type="text" name="user" size="12" style="border-style: solid" value="">
</font></b></td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Password </font></B></td>
<td width="40%">
<input type="password" name="password" size="25" tabindex="20" style="border-style: solid" width="12" value="">
</font></b></td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Section code </font></b></td>
<td width="40%">
<select size="1" name="section_code" tabindex="9"
style="border-style: solid">
<%@ include file="section.txt" %>

1)
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Category </font> </b></td>
<td width="80%">
<font face="arial" size="2"> <b>
<input type="radio" name="Category" value="General">General
<input type="radio" name="Category" Value="Operators">Operators
<input type="radio" name="Category" Value="Heads">Heads<BR>
</b> </font>
</td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Budget Category </font> <b> </td>
<td width="40%">
<font face="Arial" size="2"> <b>
<input type="radio" name="BCategory" value="General">BGeneral
<input type="radio" name="BCategory" Value="Operators">Operators
<input type="radio" name="BCategory" Value="Head">Head
</td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Budget Heads
</font></b></td>
<td width="40%">
<b><font face="Arial" size="4">
<textarea rows="2" name="Bheads" cols="20" size="100"
style="border-style: solid">
</textarea></font></b></td></tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Other Category</font></b></td>
<td width="40%">
<b><font face="Arial" size="2">
<select size="1" name="OtherCategory" tabindex="20" style="border-style:
solid" size="2"><OPTION value="EH">EH
<OPTION value="EO">EO
<OPTION value="FH">FH
<OPTION value="FO">FO
<OPTION value="AO">AO
<OPTION value="AH">AH
</select></font></b></td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">email </font></b></td>
<td width="40%">
<b><font face="Arial" size="2">
<input type="text" name="email" size="20" style="border-style:
solid" width="6">
</font></b></td>
</tr>
<tr width="80%">
<td width="40%">
<font face="Arial" size="2"><b>Dob </font></b></td>
<td width="40%">
<font face="Arial" size="2"><b>
<select size="1" name="day" style="border-style: solid"><OPTION value="0">Day
<% int i;
for(i=1;i<=31;i++)
out.print("<OPTION VALUE=\""+i+"\">"+i+"</option>");
%>
</select>
<select size="1" name="month" style="border-style: solid" ><OPTION value="0">Month
<OPTION value="1" >January
<OPTION value="2" >February
<OPTION value="3" >March
<OPTION value="4" >April
<OPTION value="5" >May
<OPTION value="6" >June
<OPTION value="7" >July
<OPTION value="8" >August
<OPTION value="9" >September
<OPTION value="10">October
<OPTION value="11">November
<OPTION value="12">December
</select>
<select size="1" name="year" style="border-style: solid">
<% int j;
for(j=1950;j<=2000;j++)
out.print("<option value=\""+j+"\">"+j+"</option>");
%>
</select></b></font></td>
</tr>
<br> <br>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Date of Join
</font></b></td>
<td width="40%">
<b><font face="Arial" size="2">
<select size="1" name="day1" style="border-style: solid"><OPTION value="0">Day
<% int k;
for(k=1;k<=31;k++)
out.print("<OPTION VALUE=\""+k+"\">"+k+"</option>");
%>
</select>
<select size="1" name="month1" style="border-style: solid" ><OPTION value="0">Month
<OPTION value="1" >January
<OPTION value="2" >February
<OPTION value="3" >March
<OPTION value="4" >April
<OPTION value="5" >May
<OPTION value="6" >June
<OPTION value="7" >July
<OPTION value="8" >August
<OPTION value="9" >September
<OPTION value="10" >October
<OPTION value="11" >November
<OPTION value="12" >December
</select>
<select size="1" name="year1" style="border-style: solid">
<% int l;
for(l=1950;l<=2000;l++)
out.print("<OPTION VALUE=\""+l+"\">"+l+"</option>");
%>
</select>
</b></font></td>
</tr>
</table>
<table cellpadding="2" cellspacing="3" width="40%" >
<tr width="100%">
<td width="30%">
<input type="Submit" value="Submit" name="B1" > </td>
<td width="40%">
<input type="reset" value="Reset" name="B2"></td>
<%
//String action=request.getParameter("Submit1");
if(action!=null && action.equals("Submit"))
try{
String idcode=request.getParameter("idcode");
String user=request.getParameter("user");
String password=request.getParameter("password");
String seccode=request.getParameter("section_code");
String Category=request.getParameter("Category");
String BCategory=request.getParameter("BCategory");
String Bheads=request.getParameter("Bheads");
String OtherCategory=request.getParameter("OtherCategory");
String email=request.getParameter("email");
String day=request.getParameter("day");
String month=request.getParameter("month");
String year=request.getParameter("year");
String Dob=day+"/"+month+"/"+year;
String day1=request.getParameter("day1");
String month1=request.getParameter("month1");
String year1=request.getParameter("year1");
String Doj=day1+"/"+month1+"/"+year1;
registerbn.setIdcode("idcode");
registerbn.setUser("user");
registerbn.setPasswd("password");
registerbn.setSec_code("seccode");
registerbn.setCategory("Category");
registerbn.setBut_cat("BCategory");
registerbn.setBut_heads("Bheads");
registerbn.setOther_Category("OtherCategory");
registerbn.setEmail("email");
registerbn.setDob("Dob");
registerbn.setDoj("Doj");
registerbn.saveData();
}catch(Exception ex)
out.println("ERROR :has occured ");
%>
</table>
</table>
</table>
</form>
</td>
</tr>
<jsp include page="Footer.jsp" flush="true"/>
------------------ End of JSP Programs ----------------
// Beans Code
package beans;
import java.util.*;
import java.util.Date;
import java.util.Vector;
import java.sql.*;
public class register
private String idcode;
private String user;
private String passwd;
private String sec_code;
private Vector sec_names;
private String category;
private String bud_cat;
private String bud_heads;
private String other_category;
private String email;
private String dob;
private String doj;
private String ent_dt;
private String act_dt;
private String dbUrl=null;
private String dbUser=null;
private String dbPassword=null;
public void setDburl(String u)
dbUrl=u;
public void setDbuser(String us)
dbUser=us;
public void setDbpasswd(String Pass)
dbPassword=Pass;
public String getIdcode()
return idcode;
public void setIdcode(String i)
idcode=i;
public String getUser()
return user;
public void setUser(String u)
user=u;
public String getPasswd()
return passwd;
public void setPasswd(String p)
passwd=p;
public Vector getSec_names()
return sec_names;
public void setSec_names()
// This function should select valid section code from the database and then populate the sec_names vector.
public String getSec_code()
return sec_code;
public void setSec_code(String s)
sec_code=s;
public String getCategory()
return category;
public void setCategory(String c)
category=c;
public String getBud_cat()
return bud_cat;
public void setBud_cat(String b)
bud_cat=b;
public String getBud_heads()
return bud_heads;
public void setBud_heads(String b)
bud_heads=b;
public String getOther_Category()
return other_category;
public void setOther_category(String o)
other_category=o;
public String getEmail()
return email;
public void setEmail(String s)
email=s;
public String getDob()
return dob;
public void setDob(String d)
dob=d;
public String getDoj()
return doj;
public void setDoj(String d)
doj=d;
public String getAct_dt()
return act_dt;
public void setAct_dt(String d)
act_dt=d;
public void setMembers()
Connection conn;
Statement stmt;
String query="Select sec_code from web.section";
sec_details=new Vector();
try
conn=DriverManager.getConnection(dbUrl, dbUser, dbPassword);
System.out.println("connected");
stmt=conn.createStatement();
System.out.println("Statement Created");
ResultSet rs=stmt.executeQuery(query);
do
String seccode=rs.getString(1);
sec_details.addElement(seccode);
}while(rs.next());
rs.close();
stmt.close();
conn.close();
}catch(SQLException e)
System.out.println("Execution Occured" +e);
catch(Exception e)
System.out.println("Execution Occured" +e);
public void saveData()
Connection conn;
Statement stmt;
String id=getIdcode();
String use=getUser();
String pass=getPasswd();
String mail=getEmail();
String sec=getSec_code();
String cat=getCategory();
String oth=getOther_Category();
String bud=getBud_cat();
String dob1=getDob();
String doj1=getDoj();
String budh=getBud_heads();
String query="insert into wb_register " + "(idcode, user, passwd, sec_code, category, bud_cat, bud_heads, other_category, email , dob, doj, ent_dt)" + " values('"+id+"','"+use+"','"+pass+"','"+sec+"','"+cat+"','"+bud+"','" budh"','" oth"','"+mail+"','"+dob1+"','"+doj1+"','"+"Sysdate"+"')";
try
conn=DriverManager.getConnection(dbUrl,dbUser,dbPassword);
System.out.println("connected");
stmt=conn.createStatement();
stmt.executeUpdate(query);
stmt.close();
conn.close();
catch(SQLException e)
System.out.println("Exception occured" +e);
catch(Exception er)
System.out.println("Exception occured" +er);
------------------------End of Beans Program ---------------
Questions:-
1) when we are submitting values to form it is not stored into backend (Oracle 9i)
2) please send some source code for how to fetch values from backend and wants stored into Combo box /select Box
3) We have faced problem of How call methods of Bean program into JSP programs

The code to get the values from the database and store them in the combo box or select box would be as follows:
<%
zSQL = "select id, name from Users"
rs = Con.ExecuteQuery(zSQL);
if(!rs.next()) {
%>
<select name="id">
<option value="0">select the name</option>
<%
do {
%>
<option value="<%= rs.getString(1) %>"><%= rs.getString(2) %></option>
<%
while (rs.next());
%>
</select>
<%
else {
out.println("No Record Found");
%>
This would help you better.
and for your first question, please check whether u are able to connect database with your connection method. if you are able to connect to the database, then please check the values (print them on the browser) which are posted from form, if it is also correct then check you r insert statement.
and for your last question the best tutorial is JAVA API.
Cheers!
Rambee

Display resolution settings not storing since upgrading monitors

We have (2) Mac Pros and since upgrading to larger monitors we have been having issues with the resolution settings not "storing" in display preferences. The computer setups are slightly different, and the monitor sizes and make/models are both different, but the problems are the same:
1) Mac Pro DVI out > VGA switcher > Monitor VGA input
2) Mac Pro DVI out > VGA switcher > DVI switcher > Monitor DVI input
(*Note - I know this whole setup seems ridiculous, but it's the way each of the rooms were hard-wired)
With both machines the problems intermittently vary from the resolution itself changing at random when turning on the machine each day, to the desktop background being about 2/3 the size of the screen, while all of the icons and rest of the desktop being normal sized/extended to the edges of the monitor as it should.
It seems that if we change resolution to anything else, and then change back to the desired resolution, that usually solves the problem.
Does anyone know why these settings won't save?
(*Note - we recently upgraded to Lion, but the issue was there before and after the upgrade.)

You must close the window and save changes to keep them.
You may have a problem with Disk Permissions -- the file may not be available to you for writing.

Credit Card Processing in SAP-CC# not stored in Sales Order or Cust Master

Scenario
1. Customer creates internet order, enters CC # which is authorized by CC processor via interface.
2. If successful, order passed on to SAP, delivery is made, Invoice is created.
3. No credit card number is stored on Order or Customer Master. The authorisation details are stored on Internet Order etc.
4. Invoice created is an open item in customer account (ONE TIME Customer Account) referencing Web Order Number.
5. NO FCC1 is possible since no CC# stored.
6. User logs on to Credit Card companies website and downloads credit card funding information.
7. Creates a journal entry in system to credit one time customer account with Lumpsum amounts and debits CC Clearing Account.
8. Clears Customer Invoices in One time Customer account against the Lumpsum amount posted above.
7. Uploads EBS and clears the debit in CC Clearing Account by crediting the same account and debiting bank account.
Q1. Is there a way we can upload the transaction level details which the CC processing company can provide to clear the invoices and debit the CC Clearing Account? (Automate Step 7 and 8)
Q2 We are exploring options to convert data into EDI820 or format the data in Lockbox BAI2 and clear invoices etc
Has anyone implemented the scenario above wherein the Credit Card numbers are not stored in SAP?
Any help is appreciated.

Hi All,
Additional information, i do not see the following in Shop Admin under Transaction tab
1) Payments -Check Box
    By Invoice possible
    By Cash on Delivery possible
    By Credit Card possible
2)Preassignment: Payment - Radio Button.
   By Invoice *
   By Cash On Delivery *
   By Credit Card *
Please also let me know whether CRM_ISA_BASKET_PAYMT needs be called
Thanks
Krishna

Dynamic parameter selection from infoview not storing the sql password

We are having the problem of dynamic parameter selection from infoview not storing the sql password as it does for the actual report. We are using Crystal Reports XI Release 2 version 11.5.3.438 (Not sure of SP level, asked in separate thread).
To be more specific.
We have created a report that dynamically populates the parameters of the report by pulling the records from the Informix sql database and allowing selection from there.
In the Central Management Console for the report object we have set as follows:
Process - Database:
Use original database logon information from the report - the sql username and pw etc
Use same database logon as when report is run
Process - Parameters
In selecting a default selection there is the option to put in the sql password, however, this does not stick and clears after update.
As such the end result is that every time this report is run from infoview and a user chooses a parameter (there are 5), crystal goes through some timeout for about a minute or so and then requests the sql password, if a user then selects the next parameter, the same timeout and password dialog appears.
We need the crystal report to handle to the sql password for fetching the parameters as well as for the database section of running the report, however, the parameters insists on the end user always putting the password in.
This is 100% replicatable on our system.
Any way that we can fix this?
Will an update fix this issue? If so could you please advise which one?
Thanks

Hi,
I am having the exact same problem. Any help?
And what does "Use same database logon as when report is run" mean? For me that would be that no prompt is needed for getting values in a dynamic parameter...
Regards
Magnus

1:1 previews not stored?

Similar Messages

Maybe you are looking for