1.2 bios flash works fine on P35 Platinum but still having DMA/PIO trouble on XP

After all the scare stories of the latest bios I thought I should mention that it worked like a charm for me. I went from default 1.0D to 1.2 using the MSI Forum HQ USB flashing tool: https://forum-en.msi.com/index.php?topic=108079.0 not using any windows or floppy util.
Once flashed I switched-off and unpluged it for a few minutes, then when I turned on I pressed the little reset button next to the battery on the motherboard. Then I cycled the power a few times till the monitor came to life and asked me to press F1 to reset the clock and stuff. Works great!
Now the problem I was trying to fix is that I only have IDE drives and although it boots up saying DMA mode 6 when I do something intensive such as launch Quake4 or install SP2 it reverts to PIO mode and renders it unplayable.
Same problem on both XP64 and 2003 32bit. Linux and Vista64 work great but I wanted an OS for games. Anyone else solve this problem?

Quote from: Del UK on 06-June-08, 01:38:01
The controller is set to IDE and not raid???
Go into bios
Integrated Peripherals
On Chip ATA Devices.
PCI IDE Bus Master = Enabled
On Chip Sata Controller = Enable
RAID Mode = IDE
I have not had any issues with drivers under:-
XP Home SP2 & SP3
XP Pro SP3
Suse Linux 10.2 or 10.3 64bit
Unbuntu 7.1 64Bit
Also check your IDE cable, if you have issues with 80 pin, drop to 40 pin connection, there is no speed loss on optical drives.
I am sure the guidance will help you.
ATB
Del
all done.
ide cable is that in the motherboard box
all that options in the bios are like your

Similar Messages

HT1365 reset my apple tv worked ok for a bit but still having same problem where it cannot connect to network

reset my apple tv but still not responding. reset it due to network not connected to internet. works fine for a little while then fails again.

I tried, but they want to charge me $19.99 to ask this simple question... And there doesn't seem to be any email address where I can ask by email.

Flash works fine – but causes Safari to crash!

Hi.
I've searched a bit, and can't seem to find this exact issue.
I'm running the latest Safari on 10.6.1, and for the last ten days or so, certain websites have been crashing Safari. I cannot recall installing anything new that caused it, although I did install ClickToFlash a few weeks prior to this happening.
This seems to be different than the run-of-the-mill 'Flash crashed Safari' problem, in that Flash works fine. I can use YouTube, I can see other videos (Vimeo, etc.,) I can play games…
What does crash Safari are certain websites, most noticeably for me is by bank's login page. I'll enter my name and password, and bam… hang. Uninstall Flash, and the website works perfectly.
I've tried: Uninstall and reinstall of Flash (with permission repairs each time); deleting preferences; clearing caches; made a new user account (still happened).
A couple of additional notes:
• The same thing happened in Chrome; so I imagine this is a Flash problem, not a Safari problem. Still, it's a strange problem in that Flash works fine – something else is triggering it.
• This may help narrow it down: After deleting the preferences, Safari defaults back to the 'welcome to Safari page ( http://www.apple.com/safari/welcome/ ). This page, too, crashes when Youtube is installed.
Any suggestions?

**Are you running Snow Leoaprd or Leopard? You changed your profile....
Try uninstalling and reinstalling a new copy of flash just in case. Adobe can be notorious for corrupted downloads.
http://kb2.adobe.com/cps/141/tn_14157.html
http://get.adobe.com/flashplayer/
Make sure and repair disk permissions after the installation.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Might want to try Mac maintenance...
Mac OS X: How to force background maintenance tasks (logs and temporary items)
As I suggested previously, make sure there aren't any Safari add ons causing a conflict.
Carolyn

I can't open anything that uses flash player in Firefox, I have uninstalled it and reinstalled it and no luck! but flash works fine on my seamonkey browser, can anyone please HELP me?

None of the flash games will work on FF, I have even uninstalled FF and reinstalled it, I have disabled QuickTime, I have uninstalled Adobe flash and reinstalled it and still NOTHING! Flash works fine on Seamonkey though

Check that plugin scanning is turned on (it should be by default). If it is turned off Firefox will not search the Windows registry for details of plugins that it can use.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''plugin.scan.plid.all''', if the value is set to '''false''', double-click on it to change it to '''true'''
If it was set to false, re-start Firefox to see if the Flash plugin is now available.
Also make sure that you have installed the version of Flash used by Firefox. You should have it because SeaMonkey is using it, but if the Flash plugin is in SeaMonkey's own plugins folder Firefox may not be able to see it.
Download the latest plugin from http://get.adobe.com/flashplayer/completion/?installer=Flash_Player_10.2_for_Windows_-_Other_Browsers and run it to install the version of Flash used by Firefox, this will install it in the default location so that Firefox should be able to find it.

Facetime works fine on my iphone, but will not work on my MBA.

Facetime works fine on my iphone, but will not work on my MBA. Keeps telling me "unable to verify address" and says it is sending me a verification link to my email address but I never get anything. Crazy.
After a while it tells then me that it cannot verify my email address because of a network connection ("Could not verify the email address. Please check your network connection and try again. ")
Does anyone have any ideas?

Facetime works fine on my iphone, but will not work on my MBA. Keeps telling me "unable to verify address" and says it is sending me a verification link to my email address but I never get anything. Crazy.
After a while it tells then me that it cannot verify my email address because of a network connection ("Could not verify the email address. Please check your network connection and try again. ")
Does anyone have any ideas?

Hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m my problem is imac works fine in safe mode,but when you try to startup normal it's connstantly restart by it self.

hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m
my problem is
imac works fine in safe mode,
but when you try to startup normal it's connstantly restart by it self.

in safe mode works perfectly,soon as I try to boot in normal mode it's keep restarting.on screen I don't see any line vertical or horizontal picture look normal on safe mode.but unable to start normal it just restarting over and over.I try another HDD but same things happen,I replace memory but still same.works ok in safe mode but not in normal mode.I will try to post system error report.

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

Can you give me a screenshot of the User Accounts window in Control Panel?
Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

I am trying to connect to my Wifi Network. It is a Galaxy Nexus. I am trying to connect to this Hotspot. I have an iMac that works fine with my network but for some reason with this computer I cannot connect.

So far I have pulled the system configuration file, I have reset safari, I deleted all old passwords from the wifi network in Keychain I restarted both devices. I am at the end here and I cannot get it to work I have an iMac that works fine with my network but for some reason this computer will not connect. It is system wide specifically to my personal hotspot. I can connect fine to any other network (wifi) but just not mine. I have not changed any wifi settings. I have been trying to figure this out. I have a MacBook Pro Late 2006 model running Lion (10.7.5) So any ideas anyone? Please help!

12. At a WiFi hotspot, you can't get connected. The most frequent reason is the login screen for the WiFi hotspot is only able to be connected with a single type of browser. If Safari doesn't work, try Firefox, Chrome, Omniweb, or Opera.
From my tip:
https://discussions.apple.com/docs/DOC-6411

Workbook works fine in discoverer plus but shows error in discoverer viewer

Hi,
I have some issues with the parameter of a report.
one of the parameters is
mgr_id (eg: 1,2,3) -- from database table.
manager names are not available in the database but they are known to users like
1 - david
2 - alan chris
3 - peter
so the requirement is
(i) the input parameter wud be entered as 1 or 2 or 3 or null ( or in multiple combination or all).
But the report shud have parameters in the header of the report.
for eg: if the input parameter is mgr_id = '1' then the report shud have manager name: 'david' in the header.
if the input is mgr_id = '1',' 2', '3' then on the report header, it shud display as manager name: 'david','alan chris','peter'
(ii) the default value of mgr_id shud be 'ALL'. if the user enters mgr_id as 'ALL' then it shud take all the values of mgr_id and pull all the values of mgr_id (like 1,2,3)
and the report header shud display as department name: 'ALL'
i have developed a custom query where i used,
select dept_id, decode(mgr.mgr_id,'1','david','2','alan chris','3','peter') as mgr_name, ..... etc.
in discoverer admin,
I have created LOVs (item classes) for mgr_name.
after that going to properties of mgr_name, i have selected mgr_id as indexed item.
and in the report i have created parameter dept based on mgr_name and selected the option -- allow to select both indexes and values.
and in the default value i mentioned 'ALL'.
after that i changed the condition as
((mgr_name = :manager name) OR (mgr_name LIKE DECODE(:manager name,'ALL','%')))
and in the header, i used &department name --- then it displays correctly.
but the problem is ---
the report works fine in plus. the problem is only when parameter value is 'ALL'
when i run the report from discoverer viewer for the very first time (after logging in), the report works fine with correct data.
but when i run the same report second time with parameter value 'ALL', it gives an error ---
Invalid value "''" for parameter "department name"
i dont understand, why it works for first time and doesn't afterwards. If i logout and login again, it works fine in viewer.
am i doing anything wrong in conditions or declaring the parameters?
I came to know that, the very first time, when we enter 'ALL' it is taking '%' but when we run for the second time, it is taking NULL. since NULL isn't there in mgr_id or mgr_name, it is throwing that error.
How do i fix this error?
Thanks

Hi Puppethead,
I have tried with your suggestions.
the following condition -- did not work
( (mgr_name = :manager name)
OR (mgr_name LIKE DECODE(:manager name, 'ALL', '%', NULL)))
but for the other condition ---
( (mgr_name = :manager name)
OR (mgr_name LIKE DECODE(nvl(:manager name, 'ALL'), 'ALL', '%', NULL)))
is wrong because, :manager name cud be null, when it is null, it takes 'ALL' i.e. '%' which shud not be the case.
if the user enters null, it has to display records with null only but with the above condition it takes '%'
The main issue which i dont understand is, the report works fine for the first time. for the second time, the report takes null values . why is it taking null values for the second time.
Thanks

WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

Question
WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

I just updated my whatsapp...clicked on whatsapp in appstore and now can access my whatsapp

ANT Deployment issue. works fine in one environment but fails in other

Hi,
Ant script is working fine in Dev environment but is failing in the other environment. Somehow the BPEL server is not able to pick the latest deployed process , due to this the dependent BPEL processes are failing. If we restart the server , it moves forward and then fails at the point where it couldn’t find reference to the processes deployed after restart. Restarting the server at every failed interval will deploy all the BPEL processes which is not the solution.
example : we have BPEL Processes say A, B, C, D and E. A,B are independent processes C is dependent on A, D is independent and E is dependent on D. So I have Ant script to deploy in A,B,C,D,E order. Now I run the Ant Script: It deploys A,B processes and Fails at C saying it couldn't find the process A.wsdl(But A is deployed). So if i restart now it recognizes A and B are deployed so C is also deployed succesfully it also deploys D as it is Independent but fails at E. If i restart the server E is also deployed.
The Environment is clustered.
Any suggestion to make my Ant script to run at a go will be highly appreciated
Thanks
Krishna

Hi KrishnaBhaskarla,
I have something related to ant script, Can you please provide me the steps for deploying applications using ant script.
Regards
Kumar

HT204053 i have an itunes library with 1,000+ songs on a pc. my daughter has a macbook air and i loaded my apple ID onto it. how do i get the songs from my itunes account to show up? This works fine on her iPhone, but having trouble on the new macbook

i have an itunes library with 1,000+ songs on a pc. my daughter has a macbook air and i loaded my apple ID onto it. how do i get the songs from my itunes account to show up? This works fine on her iPhone, but having trouble on the new macbook air

Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G.

My iPad is set up for my Apple ID account and works fine with iTunes. But when I try to use it for the App Store, my wife's apple ID shows up, not mine.

My iPad2 is set up with my Apple ID and works fine with iTunes. But when I try to use the app store, my wife's apple ID appears in the password window, not mine. How can I get my apple ID to show up?

Sign her out and sign yourself in!

Is there a way to print from ipad 4 to a non AirPrint printer? I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer. Is there an app for this or adaptors which could work? thank, Ric

Is there a way to print from ipad 4 to a non AirPrint printer?
I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer.
Is there an app for this or adaptors which could work?
Thank, Ric

Printopia is another option but be aware that since these solutions effectively act as a print server and AirPrint receiver, they require a computer to be running on the same WiFi network.
Canon also has a couple of apps in the App Store that might facilitate this on non-AirPrint printers. Check out...
Canon Easy-PhotoPrint
Canon Mobile Printing
PIXMA Printing Solutions

Text Index works fine consistently with Table, but not on underlying View

Hi,
We are facing weird issue relating to Oracle Text Indexes. Search using Oracle Text Index
works fine on a Table, but when running query on View it gives sometimes (not consistently)
ORA-20000: Oracle Text error:
DRG-10849: catsearch does not support functional invocation
DRG-10599: column is not indexed
Sometimes it works.
All of the below steps are run using User IR2OWNER:
STEP 1: Table CPF_CUSTOMER created as follows (3 Non Text Indexes defined at time of creation )
**Please note no Public Synonym is created for this Table**
** There is already another Table by same name CPF_CUSTOMER under different Owner (CDROWNER)
and that Table has Public Synonym CPF_CUSTOMER created. Other Table CPF_CUSTOMER does not
have any Views **
create table CPF_CUSTOMER
CPF_CUSTOMER_UUID NUMBER(20) not null,
SAP_ID VARCHAR2(10 CHAR) not null,
IRIS2_ID VARCHAR2(7 CHAR),
NAME VARCHAR2(70 CHAR) not null,
DRAFT_IND NUMBER(1) not null,
ACTIVE_IND NUMBER(1) not null,
REPLACED_BY_CUST VARCHAR2(10 CHAR),
CRE_DT_GMT DATE,
CRE_DT_LOC DATE,
TIME_ZONE VARCHAR2(3 CHAR),
CRE_USR VARCHAR2(8 CHAR),
CHG_DT_GMT DATE,
CHG_DT_LOC DATE,
CHG_TIME_ZONE VARCHAR2(3 CHAR),
CHG_USR VARCHAR2(8 CHAR),
VFY_DT_GMT DATE,
VFY_DT_LOC DATE,
VFY_USR VARCHAR2(8 CHAR),
DIVISION VARCHAR2(20 CHAR),
SALES_ADMIN VARCHAR2(3 CHAR),
MF_CUST_CDE VARCHAR2(14 CHAR),
CR_CTRL_OFCE VARCHAR2(3 CHAR),
DEFAULT_INV_CCY VARCHAR2(3 CHAR),
AUTOBILL_OVRRD_IND NUMBER(1) not null,
AUTOBILL NUMBER(1) not null,
AUTOPRT_OVRRD_IND NUMBER(1) not null,
AUTOPRT NUMBER(1) not null,
AVE_PYMT_DAY NUMBER(3),
TTL_INV_VAL NUMBER(12,2),
INHERIT_CR_TERM_ASSGMT NUMBER(1) not null,
NORMALIZED_NME VARCHAR2(70 CHAR),
OB_PYMT_OFCE VARCHAR2(3 CHAR),
IB_PYMT_OFCE VARCHAR2(3 CHAR),
CGO_SMART_ID VARCHAR2(20 CHAR),
REC_UPD_DT TIMESTAMP(6),
NCPF_CUST_ID VARCHAR2(7) not null,
CPF_CUST_LEVEL_UUID NUMBER(20) not null
tablespace DBCPFP1_LG_DATA LOGGING;
CREATE UNIQUE INDEX CPF_CUSTOMERI1 ON CPF_CUSTOMER
(SAP_ID ASC) TABLESPACE DBCPFP1_LG_INDX;
ALTER TABLE CPF_CUSTOMER
ADD CONSTRAINT CPF_CUSTOMERI1 UNIQUE (SAP_ID);
CREATE UNIQUE INDEX CPF_CUSTOMERI2 ON CPF_CUSTOMER
(CPF_CUSTOMER_UUID ASC) TABLESPACE DBCPFP1_LG_INDX;
ALTER TABLE CPF_CUSTOMER
ADD CONSTRAINT CPF_CUSTOMERI2 UNIQUE (CPF_CUSTOMER_UUID);
CREATE INDEX CPF_CUSTOMER_IDX2 ON CPF_CUSTOMER (UPPER(NAME))
TABLESPACE DBCPFP1_LG_INDX;
STEP 2: Create View CPF_CUSTOMER_RVW on above Table (and Public Synonym on View)
This View is created under same OWNER as Table created in STEP 1 (IR2OWNER)
create or replace view cpf_customer_rvw as
select
CPF_CUSTOMER_UUID,
SAP_ID,
IRIS2_ID,
NAME,
DRAFT_IND,
ACTIVE_IND,
REPLACED_BY_CUST,
CRE_DT_GMT,
CRE_DT_LOC,
TIME_ZONE,
CRE_USR,
CHG_DT_GMT,
CHG_DT_LOC,
CHG_TIME_ZONE,
CHG_USR,
VFY_DT_GMT,
VFY_DT_LOC,
VFY_USR,
DIVISION,
SALES_ADMIN,
MF_CUST_CDE,
CR_CTRL_OFCE,
DEFAULT_INV_CCY,
AUTOBILL_OVRRD_IND,
AUTOBILL,
AUTOPRT_OVRRD_IND,
AUTOPRT,
AVE_PYMT_DAY,
TTL_INV_VAL,
INHERIT_CR_TERM_ASSGMT,
NORMALIZED_NME,
OB_PYMT_OFCE,
IB_PYMT_OFCE,
CGO_SMART_ID,
NCPF_CUST_ID,
CPF_CUST_LEVEL_UUID,
REC_UPD_DT
from CPF_CUSTOMER;
CREATE OR REPLACE PUBLIC SYNONYM CPF_CUSTOMER_RVW FOR CPF_CUSTOMER_RVW;
STEP 3: Insert Test row
insert into cpf_customer (CPF_CUSTOMER_UUID, SAP_ID, IRIS2_ID, NAME, DRAFT_IND, ACTIVE_IND, REPLACED_BY_CUST, CRE_DT_GMT, CRE_DT_LOC, TIME_ZONE, CRE_USR, CHG_DT_GMT, CHG_DT_LOC, CHG_TIME_ZONE, CHG_USR, VFY_DT_GMT, VFY_DT_LOC, VFY_USR, DIVISION, SALES_ADMIN, MF_CUST_CDE, CR_CTRL_OFCE, DEFAULT_INV_CCY, AUTOBILL_OVRRD_IND, AUTOBILL, AUTOPRT_OVRRD_IND, AUTOPRT, AVE_PYMT_DAY, TTL_INV_VAL, INHERIT_CR_TERM_ASSGMT, NORMALIZED_NME, OB_PYMT_OFCE, IB_PYMT_OFCE, CGO_SMART_ID, NCPF_CUST_ID, CPF_CUST_LEVEL_UUID, REC_UPD_DT)
values (2.26283572796028E15, '6588125000', '6588125', 'S M Mooseen And Sons(PVT) Limited', 0, 1, '', to_date('15-03-2005 08:55:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('15-03-2005 14:25:00', 'dd-mm-yyyy hh24:mi:ss'), 'IST', 'licr2', to_date('19-02-2007 00:33:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('19-02-2007 06:03:00', 'dd-mm-yyyy hh24:mi:ss'), 'IST', 'BaseAdmi', to_date('15-03-2005 09:03:00', 'dd-mm-yyyy hh24:mi:ss'), to_date('15-03-2005 14:33:00', 'dd-mm-yyyy hh24:mi:ss'), 'ninwasa', '', '', 'SRI06588125000', '463', '', 0, 0, 0, 0, null, null, 0, 'SMMOOSEENANDSONSPVTLIMITED', '', '', '', '6588125', 109966195050333, '14-JAN-09 02.49.28.325774 PM');
commit;
STEP 4: Create Oracle Text Index on Table CPF_CUSTOMER
EXEC CTX_DDL.DROP_PREFERENCE('CTXCAT_IR2_STORAGE');
EXEC CTX_DDL.CREATE_PREFERENCE('CTXCAT_IR2_STORAGE', 'BASIC_STORAGE');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'I_INDEX_CLAUSE', 'TABLESPACE COMMON_SM_INDX COMPRESS 2');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'I_INDEX_CLAUSE', 'TABLESPACE COMMON_SM_INDX COMPRESS 2');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'K_TABLE_CLAUSE', 'TABLESPACE COMMON_SM_INDX COMPRESS 2');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'R_TABLE_CLAUSE', 'TABLESPACE COMMON_SM_INDX COMPRESS 2');
EXEC CTX_DDL.SET_ATTRIBUTE('CTXCAT_IR2_STORAGE', 'I_ROWID_INDEX_CLAUSE', 'TABLESPACE COMMON_SM_INDX storage (INITIAL 5M)');
-- Define IR2_AB_LEXER to handle Special Characters.
EXEC ctx_ddl.drop_preference('IR2_AB_LEXER');
EXEC ctx_ddl.create_preference('IR2_AB_LEXER', 'BASIC_LEXER');
EXEC ctx_ddl.set_attribute ('IR2_AB_LEXER', 'printjoins', ',_!$~%?=({;|&+-:/)}.@`^');
--Drop Indexes
drop index CPF_CUSTOMER_DIDX1;
-- CATSEARCH INDEX on CPF_CUSTOMER.NAME
CREATE INDEX CPF_CUSTOMER_DIDX1 ON CPF_CUSTOMER(NAME) INDEXTYPE IS CTXSYS.CTXCAT PARAMETERS ('STORAGE CTXCAT_IR2_STORAGE STOPLIST CTXSYS.EMPTY_STOPLIST LEXER IR2_AB_LEXER');
commit;
STEP 5: Run Query to use Oracle Text Index on Base Table (works fine always. No issues seen so far)
SELECT a.sap_id||'|'||a.name||'|' CUSTOMER_STR
FROM cpf_customer a
WHERE (catsearch(a.name, 'Mooseen'||'*', '')>0);
CUSTOMER_STR
6588125000|S M Mooseen And Sons(PVT) Limited|
STEP 6: Run Query to use Oracle Text Index on View created under Table (get below error periodically)
ORA-20000: Oracle Text error:
DRG-10849: catsearch does not support functional invocation
DRG-10599: column is not indexed
But it works sometimes as in STEP 5 and returns 1 row. It is never consistent. We would like to
provide access to this Table using View only. That is why we would like to get this query working consistently
using View.
Any help or tips would be greatly appreciated
Thanks
Auro

This is a known issue with CTXCAT indexes. Sometimes the optimizer will "drive" the query off another index, and request results from the CTXCAT index on a row-by-row basis ("does the row with rowid NNNN satisfy this CATSEARCH condition?"). That's known as a functional lookup, and is not supported by the CTXCAT indextype.
The only solution is to try to persuade the optimizer to use a different plan which does not use a functional lookup. This can be achieved by the use of hints, or sometimes by collecting or deleting statistics on the table.

1.2 bios flash works fine on P35 Platinum but still having DMA/PIO trouble on XP

Similar Messages

Maybe you are looking for