1/2s of Static

I've discovered a number of songs in my library that iTunes has decided to play about 1/2 second of static right at the end of.
So far as i've found, all are songs that fade out at the end (finishing with silence .: even more annoying). The song plays through fine, then right at the end, the time counter jumps back 1s and a little tiny piece of static plays.
Files are all LAME mp3, although so is my whole library. I've played the songs in question within other apps, and the static is not there.
Anyone have any ideas as to what's causing this/how I can make it go away, short of re-importing the songs and hoping it doesn't happen again?
thanks in advance!

The column Part_Color is alrady there and for every
color (ten of them) there is 1 million records so the
OP has indeed 10 milion records in Parts table as I
understand the problem explanation. Suppose for
example the color code being part of the part_id and
take this as a fact (the design is not to be
questioned). The OP asked: 1 table of 10 million vs.
10 tables of 1 million - 1 for each color. At this
point, having no other info, I prefer 1 table
partitioned by Part_Color to take advantage of
partition elimination if the queries where the color
is known are predominant (condition yet to be
confirmed by OP)
Regards
EtbinI realize my problem is very general. But yes let's say the Part_Color is always known. Any yes let's say the Primary key would be Part_ID. And that Color is an attribute of a Part.
Maybe I was a unclear: There are 10 million different parts. (1 million of each color)
What is the advantage of the Partition by?

Similar Messages

Problem with Threads and a static variable

I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
   protected static void Init(){
        objMainProcess = new Thread() {
            public void run() {
                while( objMainProcess == Thread.currentThread() ) {
                   GetState();
        objMainProcess.setDaemon( true );
        objMainProcess.start();
    public static void initStatusTimer(){
        if(objTimer == null)
             objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
                public void actionPerformed( java.awt.event.ActionEvent evt){
                          SetState();
    private static void SetState(){
        if( objMainProcess == null ) return;
        synchronized( objMainProcess ) {
            bChanged = true;
            try{
                objMainProcess.notify();
            }catch( IllegalMonitorStateException e ) {}
    private static boolean GetState() {
        if( objMainProcess == null ) return false;
        synchronized( objMainProcess ) {
            if( bChanged) {
                SendMessage();
                bChanged = false;
                return true;
            try {
                objMainProcess.wait();
            }catch( InterruptedException e ) {}
            return false;
    }

Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D.

Can I use same IP to static to internal server from external dedicated ip?

M question is would it cause my problems if I had the outside interface external ip mapped to vlan2 with the same ip address as I am trying to create static route to my server? Or is this OK? Keep in mind these are imaginary ips.
I was trying to use this command but it was not letting me:
static (inside,outside) tcp 99.89.69.333 3389 192.168.6.2 3389 netmask 255.255.255.255
Here is the front end of my config
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password DowJbZ7jrm5Nkm5B encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.6.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 99.89.69.333 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1

Since you are using the outside interface ip address in your static PAT, you should use the keyword "interface" as follows:
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255

Compilation error while calling static method from another class

Hi,
I am new to Java Programming. I have written two class files Dummy1 and Dummy2.java in the same package Test.
In Dummy1.java I have declared a static final variable and a static method as you can see it below.
package Test;
import java.io.*;
public class Dummy1
public static final int var1= 10;
public static int varDisp(int var2)
return(var1+var2);
This is program is compiling fine.
I have called the static method varDisp from the class Dummy2 and it is as follows
package Test;
import java.io.*;
public class Dummy2
public int var3=15;
public int test=0;
test+=Dummy1.varDisp(var3);
and when i compile Dummy2.java, there is a compilation error <identifier > expected.
Please help me in this program.

public class Dummy2
public int var3=15;
public int test=0;
test+=Dummy1.varDisp(var3);
}test+=Dummy1.varDisplay(var3);
must be in a method, it cannot just be out somewhere in the class!

Error while running statically linked OCCI application on 11G client

Hello,
Till recently we used RogueWave classes to connect to Oracle database both 10G and 11G server. So we used to do a build on 10.2.0.4 client and then use that same build with 10.2.0.4 as well as 11.1.0.7 client to connect to 10G and 11G server databases respectively.
Now we replaced RogueWave classes with Oracle Template Library solution which is a open source solution and want it to run the same way as in use Oracle 10.2.0.4 client to connect to Oracle 10G database and Oracle 11.1.0.7 client to connect to Oracle 11.1.0.7 database. But here when we used to do a build and link with occi library of 10.2.0.4 client we were unable to run that build by changing oracle client to 11.1.0.7 as name of occi library in Solaris 10.2.0.4 client is libocci.so.10.1 . This is not available in 11.1.0.7.
So we used static version of same library libocci10.a and we were successfully able to run our application on both 10.2.0.4 as well as 11.1.0.7 client but occasionally we get below message on console although no error is observed in data in databases.
ld.so.1: oracle: fatal: libskgxp11.so: open failed: No such file or directory
Here is the details.
SunOS md1npdsun37 5.10 Generic_141444-09 sun4v sparc sun4v
Can someone suggest solution to this ?
Thanks
Niraj Rathi

HI Karthick,
Thanks for your reply.
while exporting the application it is running properly on NWDS platform as well in Eclipse platform but not in mi client.
i am sure that,
<b>MCD Name = Application Name = War file which is MDK_TUTORIAL_SYNC</b>
Below is my Meta XML file:
<b><?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="MDK_TUTORIAL_SYNC" version="250901">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED" />
<Property name="EN">LANGUAGE</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZNWW_EXM01" version="2" type="download" allowCreate="false" allowModify="false" allowDelete="false" reqDirectSync="false">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="LAND_TEXT" type="C" length="50" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
</TopStructure>
</SyncBO>
</MeRepApplication></b>
reffer the above xml file and please find if i miss any fields.
regards,
Venugopal.

Static NAT to two servers using same port

I have a small office network with a single public IP address. Currently we have a static nat for port 443 for the VPN. We just received new software that requires the server the software is on to be listening on port 443 across the internet. Thus, essentially I need to do natting (port forwarding) using port 443 to two different servers.
I believe that the usual way to accomplish this would be to have the second natting use a different public facing port, natted to 443 on the inside of the network (like using port 80 and 8080 for http). But, if the software company says that it must use port 443, is there any other way to go about this? If, for example, I know the IP address that the remote server will be connecting to our local server on, is there any way to add the source IP address into the rule? Could it work like, any port 443 traffic also from x.x.x.x, forward to local machine 192.168.0.2. Forward all other port 443 traffic not from x.x.x.x to 192.168.0.3.
Any help would be very much appreciated.
Thanks,
- Mike

Hi,
Using the same public/mapped port on software levels 8.2 and below would be impossible. Only one rule could apply. I think the Cisco FWSM accepts the second command while the ASA to my understanding simply rejects the second "static" statement with ERROR messages.
On the software levels 8.3 and above you have a chance to build a rule for the same public/mapped port WHEN you know where the connections to the other overlapping public/mapped port is coming from. This usually is not the case for public services but in your situation I gather you know the source address where connections to this server are going to come from?
I have not used this in production and would not wish to do so. I have only done a simple test in the past for a CSC user. I tested mapping port TCP/5900 for VNC twice while defining the source addresses the connections would be coming from in the "nat" configuration (8.4 software) and it seemed to work. I am not all that certain is this a stable solution. I would imagine it could not be recomended for a production environment setup.
But nevertheless its a possibility.
So you would need the newer software on your firewall but I am not sure what devce you are using and what software its using.
- Jouni

In "LOOP ... WHERE ..." the line type of the table must be statically defin

Hi All,
        I have written the code, for greater than (GJAHR) 2007 and restricted company codes ( table name = ZGLCCODE).
     Here I have written the following the code which is giving an error
In "LOOP ... WHERE ..." the line type of the table must be statically defin
ZGLCCODE Contains only restricted company codes.
Code is as follows
TABLES : ZGLCCODE.
DATA : LT_DATAPACKAGE TYPE TABLE OF DTFIGL_4.
DATA : LS_PACKAGE TYPE DTFIGL_4.
TYPES: BEGIN OF LS_TZGLCCODE,
       ZBUKRS type BUKRS,
        END OF LS_TZGLCCODE.
DATA : LT_ITZGLCCODE TYPE LS_TZGLCCODE OCCURS 0 WITH HEADER LINE.
DATA : LI_NUM TYPE I,
       LC_ZGJAHR TYPE BSEG-GJAHR VALUE '2007'.
SELECT ZBUKRS INTO TABLE LT_ITZGLCCODE FROM ZGLCCODE.
Note: "C_T_DATA" dynamic structure = "DTFIGL_4" structure
*- Remove from the DataSource Company Code -
LOOP AT C_T_DATA INTO LS_PACKAGE WHERE GJAHR GE '2007'.
READ TABLE LT_ITZGLCCODE WITH KEY ZBUKRS = LS_PACKAGE-BUKRS.
IF SY-SUBRC <> 0.
   APPEND LS_PACKAGE TO LT_DATAPACKAGE.
ENDIF.
CLEAR LS_PACKAGE.
ENDLOOP.
IF LT_DATAPACKAGE[] IS NOT INITIAL.
DESCRIBE TABLE LT_DATAPACKAGE LINES LI_NUM.
IF LI_NUM GT 0.
   REFRESH C_T_DATA.
   APPEND LINES OF LT_DATAPACKAGE TO C_T_DATA.
   REFRESH LT_DATAPACKAGE.
   FREE LT_DATAPACKAGE.
endif.
ELSE.
   REFRESH C_T_DATA.
ENDIF.
Please give me your valuable suggestions.
Thanks
Ganesh Reddy.

Hi Ganesh,
whatever you do, you can try like this:
1 - any code posted should be wrapped in \
then try something like this:
field-symbols:
<tabrec> type any,
<field>   type any.
sort ITZGLCCODE by bukrs.
LOOP AT C_T_DATA ASSIGNING <tabrec>.
ASSIGN component 'GJAHR' of structure <tabrec> to <field>.
check <field> <= 2007.
ASSIGN component 'BUKRS' of structure <tabrec> to <field>.
READ TABLE LT_ITZGLCCODE WITH KEY ZBUKRS = <field>
    BINARY SEARCH TRANSPORTING NO FIELDS. "speed up the volume.
IF SY-SUBRC 0.
    MOVE-CORRESPONDING <tabrec> to LS_PACKAGE.
    APPEND LS_PACKAGE TO LT_DATAPACKAGE.
ENDIF.
ENDLOOP.
Regards,
Clemens

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Can not call a static function with-in a instance of the object.

Another FYI.
I wanted to keep all of the "option" input parameters values for a new object that
i am creating in one place. I thought that the easiest way would be to use a
static function that returns a value; one function for each option value.
I was looking for a way to define "constants" that are not stored in
the persistent data of the object, but could be reference each time
the object is used.
After creating the static functions in both the "type" and "body" components,
I created the method that acutally receives the option input values.
In this method I used a "case" statement. I tested the input parameter
value, which should be one of the option values.
I used a set of "WHEN conditions" that called the same
static functions to get the exact same values that the user should
pass in.
When I try to store this new version, I get the error:
"PLS-00587: a static method cannot be invoked on an instance value"
It points to the first "when statifc_function()" of the case function.
This seems weird!
If I can call the static method from the "type object" without creating
and instance of an object, then why can't I call it within the body
of a method of an instance of the object type?
This doesn't seem appropriate,
unless this implementation of objects is trying to avoid some type
of "recursion"?
If there is some other reason, I can not think of it.
Any ideas?

Sorry for the confusion. Here is the simplest example of what
I want to accomplish.
The anonymous block is a testing of the object type, which definition follows.
declare
test audit_info;
begin
test := audit_info(...);
test.testcall( audit_info.t_EMPLOYER() );
end;
-- * ========================================== * --
create or replace type audit_info as object
( seq_key integer
, static function t_EMPLOYER return varchar2
, member procedure test_call(input_type varchar2)
instantiable
final;
create or replace type body audit_info
as
( id audit_info
static function t_EMPLOYER return varchar2
as
begin
return 'EMPLOYER';
end;
member procedure test_call(input_type varchar2)
as
begin
CASE input_type
WHEN t_EMPLOYER()
select * from dual;
WHEN ...
end case;
end;
end;
The error occurs on the "WHEN t_EMPLOYER()" line. This code is only
an example.
Thanks.

Help!! Static sound and Lock ups

I recently updated to the newest Ipod Mini version software 1.4. and when i play the songs on my ipod i get static sounding sounds and when i look at the display timer, it looks like the ipod i slowing down.
Also i'm getting lockups when i'm browsing.
Ipod service told me to restore the ipod, and i have 3 times, 1 to the factory software version, and twice to the newer version. It didn't help, as i'm still hearing static sounds, and I've switched headphones and headphone jacks, and it still doesn't help.

the exact same thing happened to me. Mine is an original mini which needless to say is out of warranty, so I need an answer that is not "replace the hardware". Is there a way to restore it to a previous version of the software?
mini Windows XP
Windows XP

Which OCI library to use for static linking with application on Unix, Linux

Hi Friends
I am new to OCI programming.
I am developing a C++ application that works on Windows 7 (32, 64 bit, VS-9) and Linux (32, 64 bit), with OCI-11.2.0.3 version and Oracle 10g Express edition.
I want to statically link OCI library in my application.
For Windows, I got oci.lib in the package: instantclient-sdk-nt-11.2.0.3.0.zip\instantclient_11_2\sdk\lib\msvc downloaded from [Instantclient download location.|http://www.oracle.com/technetwork/database/features/instant-client/index-097480.html] .
But, the instanclient packages instantclient-basic-linux-11.2.0.3.0.zip & instantclient-sdk-linux-11.2.0.3.0.zip do not contain a static archive for OCI library.
These packages have only include files and following .so (shared libraries) for Linux:
libclntsh.so.11.1
libnnz11.so
libocci.so.11.1
libociei.so
libocijdbc11.so
Can someone please guide me, where can I find the static archive (possibly liboci.a or libociei.a) for OCI-11.2.0.3 - 32 & 64 bit?
Many thanks in advance for your time and kind guidance.
Best Regards,
-ganes

You need:
libclient11.a
libcore11.a
libgeneric11.a
libcommon11.a
libn11.a
libldapclnt11.a
libncrypt11.a
and others.
Actually, you can link to all *.a files in $ORACLE_HOME/lib
EXCEPT: libclntst11.a and libexpat.a

I want to reserve a static IP address on my Airport extreme. What is the difference between reserving by MAC Address and DHCP Client ID?

I want to understand the differences in the way you can reserve a static address for a device on the network. I had previously set the device itself to an address and then reserved it with DHCP Client ID, which I thought was just the devices static addresss. I'm not sure if this was in fact correct or just happend to work. I know what a MAC address is, but I'm not really sure what the DHCP Client ID is. So it would be great if someone could clarify it, and the difference between reserving address by MAC Address or DHCP Client ID.

A MAC address is a unique identification consisting of letters and numbers in a form that looks like this:
xx:xx:xx:xx:xx:xx
Every network device has a MAC address, which can be found on a label on the bottom or back of the device. Apple calls this the Ethernet ID.
A DHCP Client ID is an optional name that you can assign to a device. For example, on your Mac....
Open System Preferences (gear icon on the dock)
Open Network
Click on Ethernet
Click Advanced at the lower right
You may be able to edit the DHCP Client ID here....for example.....you could enter MJ500's MacBook in the space provided. That would be the Client ID of your Mac.

Sharing static members between Swing application and Web application

Hi,
if someone has done this please help:
I have created 3 classes:
Mainclass using JFrame which is used as host class for DBConnectionManager class,
and ConfigBean class used for storing static configuration parameters:
     static public String strUser = "";
static public String strPassword = "";
static public String strDB = "";
static public int nMaxConn = 0;
static public String strPoolName = "";
static public boolean bConnected = false;
static public int nCurrentUsers = 0;
static public DBConnectionManager manager = null;
     public DBConnectionManager getDBManager()
return this.manager;
public void setDBManager(DBConnectionManager manager)
this.manager = manager;
DBConnectionManager class uses static instance to see if this is only class created by client users.
Only static member in this class is getInstance member function for startig manager:
     static synchronized public DBConnectionManager getInstance()
if (instance == null)
instance = new DBConnectionManager();
return instance;
In Mainclass I also created non static DBConnectionManager class for manipluation with host administrator.
Then I created web application layout in Tomcat 4 and used index.jsp:
<%@ page import="java.sql.*,java.io.*" %>
<jsp:useBean id="cfgbean" class="webvobapli.ConfigBean" scope="application" />
<%!
webvobapli.DBConnectionManager db = null;
String strMessage = "";
Statement stmt1;
ResultSet rset1;
String strQuery = "select count(*) from cards";
%>
<html>
<%
     try
          db = cfgbean.getDBManager();
          if(db==null)
               strMessage = "Error";
          else
               Connection con = db.getConnection("central2");
               if(con != null)
                    stmt1 = con.createStatement();
                    rset1 = stmt1.executeQuery(strQuery);
                    rset1.next();
                    strMessage = rset1.getString(1);
               else
                    strMessage = "NULL";
     catch(Exception e)
          strMessage = e.toString();
%>
<p>Message = <%=strMessage%></p>
</html>
Question: why db = cfgbean.getDBManager(); returns null if I created instance of DBConnectionManager
class in Mainclass and assigned it to ConfigBean as static instance before running web application.
Shouldn't all java programs share static memory area?
Beast Regards
Branislav Cavlin

Question: why db = cfgbean.getDBManager(); returns null if I created >>instance of DBConnectionManager
class in Mainclass and assigned it to ConfigBean as static instance >>before running web application.
Shouldn't all java programs share static memory area?You say you create the db objects BEFORE you run the web application - now I could be misunderstanding what you are saying, but does this not involve two JVM's (one to create initial db objects, which then exits, then second JVM fires you app server/servlet container) - which would explain why a null object is being returned.

Does anyone know any apps or programs where you can edit voice memos? i.e.- reduce the amount of static

hey
so i decided to record some friends of mine as a joke. i was using the voice memos app on my iPhone 6.. i thought i put the phone down close enough to pick up everything, but it didn't quiet work out as well as i hoped. i ended up getting more static than voice.. does anyone know of a good app or program where i can edit this voice memo. reduce all that static and raise their voices to they can be audible?
hope y'all can help

Did you ever figure out how to fix this?

IPhone 5s poor call quality - static

I received my 5s a couple weeks ago and the phone had A LOT of static on the line during phone calls. I went to the local AT&T store and was told that it might be the sim card that was shipped in the phone, so they replaced it. That did not fix the problem. So, I ordered a second 5s and have had it a few days and am noticing the same level of static on phone calls. It's loud enough to be bothersome. Surely I haven't received the only two phones that have this problem?! I'm wondering if anyone has any suggestions for this problem, or if they've experienced this issue and if so, how it was resolved.
Thanks!

Hey guys
I got the same problem! But sadly no solution yet... ( i really hope this is a software problem....)
https://discussions.apple.com/message/23744858#23744858
During a voice call all my friends are complaining that they can't understand me.
After googeling i found out, that there were similar problems with the old iphone 5 (http://www.iphone5callquality.com/) but there are not that many people with this problem with the iphone 5s or 5c (I got a iphone 5c).
What to do...

IPhone 6 Plus front camera not working or with lines and static?

My iPhone 6 Plus front camera is having problems. Sometimes it doesn't work at all and the camera app freezes. Sometimes it works fine for a little while and sometimes it shows multi color static or lines.
I've tried:
Restoring from phone (without restoring backup)
Restoring from iTunes (without restoring backup)
Deleting ispw and re-downloading iOS 8.1.1 then restore
The phone is less than 2 months old. I noticed it acting weird a week or so after I bought it but thought it was just software. At first it wouldn't work when using the camera app but worked fine using facetime. Now it acts up regardless.
Any advice or opinions will be much appreciated.

Nore wrote:
I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
Are you a developer? IF so try asking in the developer forum.

1/2s of Static

Similar Messages

Maybe you are looking for