1.3.5.1 Updated, and Now Issue With Incoming Calls
Since updating to 1.3.5.1, any time I mute the ringer on an incoming call, it mutes the ringer until right before the missed call notification, but then plays the ringer again briefly. This defeats the purpose of being able to mute the ringer in the first place.
Post relates to: Pre p100eww (Sprint)
This occurrs any time I press the volume rocker key to mute the ring of an incoming call. After the initial time when it played an extremely brief snippet of my ringtone (factory installed "Older Phone" ringtone), it has randomly switched between the short ringtone and a electronic squeal noise.
Since I know the slightest software change can kill a seemingly unrelated feature, I'll try to be as detailed as possible. For my phone setup, it is completely stock (phone no.5 after misc. slider/screen/charger door issues, haven't had time to change anything yet) My ringtone volume is set to maximum with vibrate also on, system sounds are also set to maximum with the default tone. I have no non-app catalog programs or patches installed. I use a Touchstone back cover, although the phone was not on the charger when I noticed the issue.
The only downloaded apps on the phone are Pandora, Tip 'em!, Stop Watch, Fandango, Good Food, Mileage Monitor and gDial Pro (which has not been set up yet). With the exception of Pandora, none of these apps have been used since I received this replacement phone. They were all just automatically downloaded because my previous phone had them. I have e-mail accounts through Cox, Yahoo, and Gmail, none of which are synced to contacts, calendars, messaging or tasks. I do have my Palm profile and EAS through my work in a full sync capacity.
Hope this helps.
Message Edited by kx250ryder on 01-07-2010 07:29 AM
Message Edited by kx250ryder on 01-07-2010 07:30 AM
Similar Messages
-
Titles says it all really,
Recently upgraded to the 2014 CC update and now i can't send PSD files…or any files for that matter into Premier or AE. If i save the file in Photoshop CC2014 then i can see it in finder etc, but i try to import and i get the notice 'importer reported a generic error'
please help i have work to finishI am having the same issue. I can create a single layer file in Photoshop and it imports fine. If I create a file with 2 layers it crashes Premiere cc. Premiere will not display the box with options to import single layer, sequence etc. Any ideas?
-
Upgraded to TimeCapsule and now issues with AirPrint from iPhone and iPad
Okay. I bought a HP 210a air print printer. It was working great with my Linksys router and my iPad and iPhone worked with it perfectly. Since that time I have recently bought a new new 2TB Time Capsule and just recently set it up. The old router is no longer hooked up. Since switching over to the new router, nothing prints from the iPhone or iPad. So here are the details and I am hoping I am just missing a step:
1. I think it is important to point this part out. After setting up the new router, and before discovering any of this, I turned on the HP printer. Upon doing so, the printer informed me a software update was available from HP so I downloaded it and it appeared everything was fine.
2. After the update, I tried printing and nothing. Duh, the printer was still looking for the old router. I ran the built in HP wireless setup wizard on the printer and it pointed to the new router fine. I tested the connection using the test feature on the printer, and it printed a report that all was fine and that it was now pointed at the Time Capsule, great signal, etc...
3. I went to my iPhone and iPad, made sure they were pointed at the same network as the printer, and once again the printer appeared on each device as an AirPrint printer. Great I thought, so printed a test a page from each device. Both pages printed. Now here is where it gets weird.
4. I tried to print a second document from the iPad and iPhone, nothing. I tried a picture. Nothing. It still shows eveything setup correctly, the HP shows as the AirPrint printer and connected, but no matter what I do, it nothing is printing from either device. I've tried resetting my network settings on the iPhone and iPad and pointing to the network again, re-running the HP setup Wizard on the printer. They all show that everything is fine. The iPhone and iPad connect to the network fine, both show the printer when I go to print. However, after I hit the "print" button on either device, it shows like the document is being sent but NOTHING happens on the HP. It is very frustrating.
The WiFi is working fine, I can surf, email, etc... so the router is working properly. So what am I missing? Could the HP update somehow have caused the problem? I have to believe that between the update and the new router that somewhere I am missing a step. Any help is greatly appreciated.If that doesn't work, try power cycling your router, printer, and your iPad/iPhone in that order. To do this, follow these steps:
Unplug the router and printer from the power and shut off the i-devices. Let them sit for about 30 seconds and then plug just the router in.
Once the router is completely back online (usually takes about 30-60 seconds) plug the printer in. Wait until it is back on its home screen.
Turn the i-devices on.
Try to print again.
Let me know if this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
Updates and syncing issues with iPhone 4 and MacBook
Tried to sync my iPhone 4 to computer, says "could not be synced because the sync session failed to start." I have a MacBook with OS X 10.6.8; iTunes update 11.1.3; and iPhone IOS 7.0.4. Can someone please give me some direction?
Hi bikeski1234,
Welcome to the Support Communities!
As a first step, I would suggest quitting your open apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Then sign out of iTunes:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
Restart and/or reset the device:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Then try syncing again …
Cheers,
- Judy -
Version update and now "replace with after effects composition" is greyed out.
Hi, I've been working on a project for a while now (using Premiere Pro cc and After Effects cc).
Then CC 2014 came out. I installed those new Versions. To make sure that everything still works I've continued working with cc versions. Now if I want to "Replace with After Effects Composition" (in the premiere pro project opend in Version cc) it doesn't work since it's greyed out.
Can somebody help me?Ok guys...I got it...
Its not a *mov that it missplaced, its another dynamic link to AE...so dynamic link to dynamic link seems not to work? I accidently linked that clip and worked on it in AE in the old aep from yesterday..but still wondern why AE get confused loading it...the "old aep comp" is full with others comp...could that be the reason...? -
Wifi keeps scanning and dropping even after connected to home network. Never had this issue until the update, and now my phone runs slow and terrible. Horrible update!! Any ideas on a fix?
It's important that you have a steady WiFi connection, ZealousEdge. What phone do you have? Is your phone unable to connect to any WiFi network? If you can, please try deleting the saved WiFi network and re-adding it.
AndreaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
I did an updating and now I cannot see the photos of my contacts in whatsapp, what I can I do to solve this issue?
Click the Bookmarks icon in the Safari toolbar.
On the right hover your cursor just above the line where you see Bookmark and Address. When you see the small white hand drag up or down as needed to reveal your Bookmarks.
edit by cs -
I received an Keynote update notice on my Mac Air. I updated and now can not get into my saved keynote docs. I am being asked to upgrade again and purchase the upgrade. Anyone else having this issue?
Try this repair, ensure you complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote, use Appcleaner from Mac Update to do this, its freeware
2 restart the Mac; Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
Please report back to let us know if this helped. -
I did the update and now cant open itunes i get a error 7 windows error 198
I did the update and now itunes wont open...I get a windows error 7 (windows error 198) HELP
Hello there, thumerick.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
10.7 update and now my iphones/ipod is not being recognized.
10.7 update and now my iphones/ipod is not being recognized in windows 7 service pack 1. I have 2 iphones and an ipod 3G. I have to go into services and stop the apple mobile device and start it up again to get my devices recognized. Anyone else having the same issue? One of the iphones is not upgraded to the new iOS, the other phone and the ipod are updated.
Hi,
You probably need to update to Snow Leopard10.6.8
Click Apple icon top left and click Software Update and keep doing that until it says software is up to date.
That should bring your itunes to the correct version.
Hope this helps,
Alan -
I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!
Paldeng, thanks for the suggestion. I've done all that. I can connect to the server, but apparently they are not recognizing my ID and password. I can use the server program if I don't go through Mail (using the same ID and password). My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do. His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume). We can receive email in Mail, we just cannot send.
I contacted my service provider, and we went over my connections. They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired. Apple swears it is not their problem, it is the provider, so here I sit. My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely. The thing is, we had not messed with any of those settings, so what changed? I just did not want to bother my son again, as he has many other demands on his time.
Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard. I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update. Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections? -
Just installed the update and now iTunes wont open! Help!!!
Just installed the update and now iTunes wont open! Help!!!
See also Troubleshooting issues with iTunes for Windows updates.
tt2 -
My Windows XP software recently had an automatic update and now when I open iTunes, I receive the message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes."
I have not used iTunes for several weeks so the issue may not be related to the last Windows XP automatic upgrade. I have never had problems with iTunes in the past. Is this a real message or perhaps a virus?
Before I reinstall iTunes, any thoughts?It's a real message.
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now? -
Did Itunes update and now can't open it. It tells me msvcr80.dll is not installed,
Did update and now can't open itunes due error of msvc80.dll
Hello Nailjack,
Thank you for the details of the issue you are experiencing with iTunes. I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described. The following article has steps to do this(it is important to remove all components in the order listed):
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
I recommend continuing with this article if you continue to experience issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Did Lightroom software update and now camera won't tether
I have been using my Canon 5D Mark II tethered to Lightroom 4 successfully for quite some time. Last week I downloaded the software update and now the camera will not tether. I have tried two camera bodies and neither work. Both cameras will tether with Lightroom on a different computer (that didn't get the update). So, it's the software. Help!
Hi
try a safe boot - holding down the Shift key until it starts up -
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
If your Mac starts up as expected, immediately try restarting.
If the Safe Boot does not work, or the restart after a successful Safe Boot does not work, go to the next section.
More info on what a Safe Boot does at http://support.apple.com/kb/ht1564
also follow the rest of the troubleshooting guide at http://support.apple.com/kb/TS2570
Maybe you are looking for
-
Purchase order for the new license
We sent the purchase order for the new license to Oracle on last Friday yet to receive the new CSI for the new server . can we still move forward with deployment activity and later specify the CSI or would that stop us suring the install process if w
-
Output type determination program or fuction module.
HI Gurus, I'm looking for the standard program or function mudule that the SAP ERP are using for the determination of invoice output type. I want to debug why is not accepting some fields. Know anyone wich one is it? Thank you in advance. Abel
-
Hello there .. I am totally new to java programming and i do need a litle help if you would be so kind. Here goes. I have an object that I put in a HashMap in class1. I have class2 that calls a method in class1 asking for the HashMap value and that w
-
Too much memory consumed while my 3D scene is load and it becomes too slow
Sir i have made a room in java 3D by using Box class and lighting etc. i have converted the 3D Studio Max files (.3ds) into the .obj file and used the ObjectFile Loader to import it. All things are imported well. But the main problem arises when my s
-
Initiating Background Job in R3 through XI
Hi, I have an important issue here. How to initiate a background job in R3 (ABAP object) through XI. Thanks in advance, Bhanu P R Gattu