1.4 errors - Mac vs. Windows

I'd like to see a concise list as to which of the recently discovered 1.4 errors effect Mac platforms, Windows and both Any help here would be appreciated. I'm using 1.4 on a MacBook, importing and then converting my CR2 files to DNG and have so far noticed no errors Am I missing something?
Bill

Dick,
LR 1.4 is readjusting certain aspects of RAW files, which gives me a huge case of the willies. This happened with some of my images but most of my images were previously set to read only. Luckily i had the effected images still on a memory card so it was easy to restore.
There are a few threads discussing this already, so i won't go into all the detail about observing this here.
See the thread, 'Lightroom 1.4 writing inside CR2 files'

Similar Messages

Critical Kernel error while on windows partition, now neither mac or windows will boot help ?

Hi I was on my windows side of my mac when i got the blue-screen-of-death with something saying Critical Kernel Error, weird noises from the speakers and the macbook pro did a hard shut off.
Since then I can no longer boot into the mac or windows side (both are stuck infinitely loading). I ran disk utility on the mac side and I have an "Invalid Node Structure." Which disk utility cannot repair. I do have DiskWarrior on another mac to try and rebuild the mac partition through a firewire connection - i think that is the correct course of action ?
But does this mean my windows partition is likely gone or any idea what went on ? As I am terribly confused that while on my windows side I had an error that messsed up both partitions.
Or what to check for so this hopefully doesnt happen again if it is a hardware problem? My drive smart status is listed as "OK" and I cant seem to run the Apple Hardware test as upon attempting to get into it the laptop just shuts off while loading it, although I read somewhere the Apple Hardware test is no longer preloaded on macbook pros.
The system in question is a 15" macbook pro bought around July 2011.
Thank you,
Wes

Alright I have both my mac side and windows side repaired and functioning fine. Should I still be concerned ? Linc I know you are saying this is a drive malfunction but is there a way I can be sure ? I still cannot run AHT (restart, hold down D), and my laptop shipped with Lion installed so I believe it should run. It just boots into the mac side when I hold D..

On Firefox 3.6.x on Mac and Windows, Google Analytics tracking code leads to an Error 400 page

Our business sent out an email campaign that has several links containing Google Analytics tracking code in the URL.
In the tracking code, which is automatically generated via the email campaign software, is an em-dash. The URLs works in every browser (Google Chrome, Safari, Windows) and in older versions of FireFox. They do not work in 3.6.x versions of FireFox in both Mac and Windows.
As a result, when customers click on a link in the email, they get a page that says "HTTP Error 400 - request is badly formed" because FireFox interprets the em-dash as garbage.
Once this error occurs none of the pages in the site can be accessed unless a specific cookie is removed.
Seeing how many people do not know how to clear cookies - it is especially cryptic in the Windows version of FF 3.6.10 - what are the chances that there will be a release of Firefox to remedy this problem? And is there anything else that could be done?

Weird. We are having this same problem as well. Ours happens in Chrome as well. What I have figured out is -at least for us - is its somethign to do with the Google Analytics tracking cookie on our site. If I go to cookies and then delete the _umtz cookie, the site will load fine. In the time being I have set "pageTracker._setCampaignTrack(false); " in our tracking code to keep the script from dropping the cookie in users browsers.

Hi, We use a Mac os window. How can we get Adobe error code 16 problems in premier cs5. Before 6 da

Hi,
We use a Mac os window. How can we get Adobe error code 16 problems in premier cs5. Before 6 days premier does not loaded a Audio.
please help me.

I think you are posting to the wrong forum. I'd post this in the Premier forum: http://forums.adobe.com/community/premiere/premierepro_current
-Carl V.

I keep getting the error message "Restore Windows" Finder application quit unexpectedly. When I click an icon on the desktop on my Mac Book Pro it does not respond.

I keep getting the error message "Restore Windows" When I click an icon on the desktop on my Mac Book Pro, it is not reaponding.

While holding down the option key, select "Go>Library" from the Finder. Navigate to the Preferences folder and you'll find "com.apple.finder.plist". Delete that file and restart.
Good luck,
Clinton

Copying files from Mac to Windows-invalid file names

Unfortunately, my boss likes Windows more than Macs, so we have puchased some new Dell computers to replace older G4 Macs.
I'm having trouble copying existing files from a Mac (OS 10.4)to the shared drive on the Windows XP computer. I'm getting an error message:
"You can't copy the item 'filename' because the name is too long or includes characters that the disk can't display." Sometimes it doesn't give a filename, it gives a similar message "Some items couldn't be copied..."
I assume the person has used some "illegal" file names such as "Meeting minutes 10/7/07" Or maybe we have too many folders inside of folders.
QUESTION: Is there a correct/better way to copy large quantites of files/folders from Mac to Windows? Or is there a program that will look at the Mac files and alert me to wrong or too long files names?
Other ideas to copy these files?
thanks,
Bill

You can use a freeware utility like Renamer4Mac or BatchRename'em both of which have built-in filters that will rename files for Windows compatibility.
Thank you... This sounded to me like it would fix the problem, so I downloaded both and looked at them. However, the manual/help file is very sparse, so I don't know if it will do what I want to and how it would do it.
1. I couldn't find any option in either program to: Look at all files in selected folder, and list any invalid file names for Windows.
2. There doesn't seem to be an option to "rename files without bad Windows characters" or "Remove invalid for Windows characters"
I just couldn't find any explanation of how it was offering to rename the files. I can't rename all files to sequential names, that would make it hard to find a file later.
Thank you,
Bill

ITunes 11.1.1 Update Error - Mac OS X 10.6.8 Snow Leopard

Hello iTunes Community!
I've been reading about the non-descript error message that Windows users are getting when attempting to update to iTunes 11.1.1. It appears to affect Mac OS X as well in that I too am getting the same error. I'm running a 20" aluminum iMac with Mac OS X 10.6.8 Snow Leopard. What's interesting though is that when I checked iTunes to make sure it still functioned correctly and took a look at "About iTunes" it shows version 11.1.1 (11). So it appears that the update actually occured, but somehow did not finish-up quite right??? Is there any cause to be concerned, or do I just keep it the way it is? I ran the update twice and it still shows-up as an available update in Software Update.
I'm beginning to suspect that there may be a problem with the update.
Regards,
Doug

Hi folks...
Based upon a recommendation from a friend who is an authorized Apple service provider, I downloaded the iTunes installer directly from the Apple/iTunes website and ran the install. I worked perfectly and iTunes is working normally... I think.
FYI, one problem I encountered with the Software Update version of the installation is that iTunes didn't "see" my iPhone 4S. The new installation resolved that issue.
I hope this helps anyone else out there that is experiencing the same problem.

Problem opening PrE 9 project created on Mac in Windows

Hi, I recently migrated from a Mac to Windows 7, and am having problems opening my project files on the Windows computer. I created several PrE9 projects on my Mac, but now I need to open some of these files on a PC with Windows 7. I get the error message "The project is not compatible with current version of Premiere Elements." I have successfully opened other CS5 project files (AI, PS) on both platforms. This is the first I've seen Adobe files open on Mac but not PC.
So, assuming this is going to be impossible, can I export from the Mac version of PrE to Windows? Is cross-platform collaboration impossible with PrE 9? That doesn't seem likely. What am I missing?
I have some title animations that I created on the Mac that I would really like to reuse in new Windows projects moving forward. I hope I don't have to recreate them from scratch!
Thanks for any help.

Unfortunately, project files created on the Mac platform are not compatible with the Windows version of the product and vice versa.
You can't work on the same project file on both a Mac and a PC. Sorry.

HT201077 photos not getting added up in my photostream. It's showing some kinda registry error in my windows. Plz help

photos not getting added up to my photostream. It's showing some kinda registry error in my windows. Plz help!!

Hi Melissa_C!
I have an article for you that may help shed light on this circumstance:
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/ht4486
How long are My Photo Stream photos stored in iCloud?
The photos you upload to My Photo Stream are stored in iCloud for 30 days to give your devices plenty of time to connect and download them.
How many photos are stored in My Photo Stream on my devices and computers?
iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.
Your iOS devices keep a rolling collection of your last 1000 photos in the My Photo Stream album. From there, you can browse your recent photos or move the ones you like to your Camera Roll or another album to keep them on your device forever.
Because your Mac and PC have more storage than your iOS devices, you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, select Photos (or Photo Stream) > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture. On your PC with My Photo Stream enabled in the Control Panel, all of your photos will be imported into C:\\Users\<user name>\Pictures\iCloud Photos\My Photo Stream. For iCloud Control Panel 2.0 to 2.1.2 users, the path isC:\\Users\<user name>\Pictures\Photo Stream\My Photo Stream .
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Trouble printing from mac to windows printer

I purchased my first mac last weekend and successfully set it up on my home network which is shared with my windows xp desktop. My HP deskjet printer is shared on the network through my desktop windows pc (not on a separate printer router). My mac recognizes the printer on the network but it prints meaningless garb when I ask it to print a document. Any suggestions to rectify my printing problem???
iBook G4 Mac OS X (10.4.3)

I followed the instructions at http://www.ifelix.co.uk/tech/3012.html and am having the same issue. Whether setting up manually or using Bonjour, it seems that you have to select an Apple Driver. The problem is that the Windows 7 does not provide Apple drivers. Luckily, I have an old XP installation CD so I can access the printer drivers I need, but because I already installed the printer drivers from my printers CD Windows will automatically install with that driver, not giving me the "have disk" option.
So I tried to install with Bonjour again, which allowed me to pull up the drivers from teh XP installation disk, but then gave me an error that I didn't have permissions to install the selected printer.
So I deleted the Canon driver for my printer from Windows 7 and went through the process described at http://www.ifelix.co.uk/tech/3012.html again. This time I was able to select the Apple Color Laserwriter printer from the XP installation CD, but I got an error message saying that Windows was unable to find an appropriate driver.
At this point, after a couple hours trying to do a simple file share, which should only take 30 seconds, I'm giving up being able to print to a printer connected to a mac from my Windows 7 laptop. Now I have to open files on the mac from the network file share to print.
Mixed having both Macs and Windows machines on the same network is a recipe for a headache.

Error when installing windows 7

Hello... When installing Windows 7 Ultimate, I'm getting an error during the windows installation setup. I get the error 0x800024. I choose the correct partition, click install, and this error shows.
I'm on a mac pro and on snow leopard. I have boot camp 3.0.1, which doesn't show windows 7 when it's about to reboot into the installation screen. Is there anything I can do?

Have you looked here?
http://support.apple.com/kb/HT3986
Supposedly you need BootCamp 3.1 for Windows 7.
On a MacPro you can't have the Mac OS in slot 1 if you going to install Windows on a second drive. Just put the blank one in slot #1 (that you want Windows on) and then Mac OS drive in slot #2, #3 or #4 and it should work then.
Boot Camp can only use up to 2 partitions, Mac as #1 and/or Windows as #2. No 3rd partition. You have to have enough free space to use Boot Camp. If you have a 300 gig disk and you have 200 gigs worth of space used up it will only see the 100 gig of space left. And if it's an old disk you may not have enough CONTINUOUS space for it. The files may be all over and it can't find enough free space.
If on a second (blank) disk what I did was use Disk Utility to format/partition (UFS, Journaled) the whole disk as 1 partition and then let Boot Camp/Windows 7 (I used XP) repartition the disk as NTFS as the first partition (for XP) and left the second (for storage) alone. Or in your case just let Boot Camp/Windows partition it as one NTFS.
You have to tell it which one to use. If you don't have a choice then set the partition larger then 32 gigs then you should only have one choice, NTFS.
The Mac can't write to an NTFS disk so it can't make a NTFS partition. So that is why you just partition it like you would if you were only putting the Mac on it. (On an already blank disk). Then when Boot Camp/Windows takes over then Windows can write the NTFS partition.
The same with a Mac already on a hard drive. 1 partition. Boot Camp/Windows will then make the 2nd partition an NTFS partition (or what ever you want).
Hope this helps....

When I launch firefox on my wife's computer it comes up "Error Launching Brouser window : no XBL Binding for browser". What does this mean? How do I fix it?

On my wife's computer, when she tries to launch Firefox in order to connect to the internet, a window pops up that says "Error launching browser window: no XBL binding for the browser. How do I fix this? I am not very computer literate so please don't use too much computer lingo. Thanks for your help.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

I'm trying to download internet security and an error of microsoft windows applications are not supported on OS x keeps coming up

I'm trying to download internet security and an error of microsoft windows applications are not supported on OS x keeps coming up

That's because you must be trying to download a Windows application, and they do not run on a Mac unless you are running Windows on the Mac.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
For adware removal see The Safe Mac » Adware Removal Guide and The Safe Mac » Adware Removal Tool.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
     is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
     the most successful malware attacks rely on very sophisticated social engineering
     techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
    your computer is intended to entice you to install their malware thinking it is a
    protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
    from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
    you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.

I purchased the Lightroom disc and it says it is good for Mac and Windows I can not download it on my Mac

I have bought the Lightroom Disc it says it is good for Mac or Windows I have an iMac and it does not download WHY PLEASE HELP NO ONE SEEMS TO BE ABLE TO HELP ME I KEEP TRYING YOU PEOPLE AND NO ONE HELPS ME!!!!!!

Lukcydo I am sorry you are facing difficulties installing Photoshop Lightroom. Do you receive any specific error messages when you try to install? What version of Photoshop Lightroom did you purchase?

Disk Error after BC Windows XP Install on Snowleopard

So when I inserted the Windows XP disc in my mac after it told me to, my computer restarted and installed Windows XP on my newly partitioned 40GB Fat32 drive (it had asked to chnage to NTSF but I selected leave without changing. After installing Windows it said something like "Windows is installed, now restarting", now every I try to boot up with the Windows XP partition by holding down "option/alt" at start up, it goes to the black DOS like screen and says Disk Error, cannot load Windows, press any key to continue". Pressing any key does nothing, so I have to restart, and thus I am at another brick wall.
I downloaded some Boot Camp Snow Leopard Drivers and tried burning the .iso of it to a disc but that wasn't even working, not sure I even need to get to that step yet.
Help?

Got it, was supposed to reformat the drive within the windows installation. Turns out reading the .pdf manual can be helpful....

1.4 errors - Mac vs. Windows

Similar Messages

Maybe you are looking for