1/4 inch to USB and XLR to USB

am i able to use a usb hub and connect 24 or more usb cables connected to mic's ax's and non midi devices to record? you know so i have a diffrent input to each channel? i have not yet rec the software but will have it in a week. want to know what else to get.
i cannot find an answer anywhere.

what you are looking for is called an Audio Interface.
They come in the PCI, Firewire, and USB varieties. I recommend using firewire if you have an open fw port.
Do some research on Audio Interfaces to see which suits your needs best--if you are looking for 24 channels of I/O, then get ready to spend a good dollar. And if you are talking about 24 channels of Mic pre, then get ready to spend more.
Consider the options given, there are some great sub-$1000 setups.
Good Luck.
-m

Similar Messages

Is there an easier way to transfer your iTunes library on windows to a mac than copying the library to a usb and plugging the usb into the mac and put the library in the iTunes file

is there an easier way to transfer your iTunes library on windows to a mac than copying the library to a usb and plugging the usb into the mac and put the library in the iTunes file? I recently swapped to Mac and this is how i moved the library from windows to mac and library is in tact but is there an easier way? My cousin just imported her cd's again, but it was harder for me as i have an ipod with over 150 apps and i needed to move them. i think it would be helpful if i knew of an easier way so i can help a friend move his. Thanks

The general method of use is to download a script (double-click or right-click and use Download or Save As...) to a folder of your choice, e.g. your Desktop, Downloads folder or create a folder at ...\iTunes\Scripts. Select a playlist or highlight some tracks in iTunes and then double-click on the script to execute it. If no specific tracks are selected the script will try to work with all tracks in the current playlist or sometimes the entire library.
tt2

Shure X2U usb adapter (XLR to USB) for microphones - very low volume

I've just bought a Shure Sm57 and X2U usb adapter - however when I plug it into Garageband there are no level controls (understandably) but even with full gain turned up on the adapter the levels are so low as to be unusable. I need to be right on top of the mic for any pick up (about three or four green lights on the bar) and as soon as I turn my head or go more than two inches from the mic, everything drops off.
I've tried the mic with a stereo adapter and put it through my Griffin iMic and seem to have similar problems, but when hooking the mic up to a proper pre-amp kit on a stage, the sound was delicious!
Anyone using one of these adapters, anyone with a problem?
Do I need some sort of powered pre-amp? I doubt it the manual advises just to plug it straight into the USB.
I'm running 10.5.7 so no need to run the drivers (they wouldn't let me anyway!)
Help!

OK - the replacement SM58 microphone, with a new usb arrived.
I've set it up - this time putting a pair of headphones into the monitor jack of the USB adapter - and the pick up over the monitor is amazing, I can be about two feet away, talking quietly and it picks up everything - a little bit of background hiss, but this can be reduced by adjusting the monitor and volume dials.
Plugged into my mac is a different matter - the pick up is still negligible - very low, and with no controls.
Checked in Sys Pref Sounds and in GB - the levels are so low as to be unusable - unless I sit an inch away from the mic.
This is with the gain dial of the USB adapter turned up quite high - possibly 8 or 9 out of 10.
I'm thinking now the problem lies with the Mac side of things - I wonder if the drivers are doing what they are supposed to do.

HT1766 My iphone is locked on symbol of usb and itunes

My iphone is locked on symbol of usb and itunes

Plug the USB cord into your iPhone and your computer and open iTunes.

Host usb Vs walk-up usb !!!

what is the difference between host usb and walk-up usb in the HP Laserjet pro 400 M401dw-Printer ?in the datasheet :1 Hi-Speed USB 2.0; 1 Host USB; 1 Ethernet 10/100/1000 Gigabit network; 1 Walk-up USB

what is the difference between host usb and walk-up usb in the HP Laserjet pro 400 M401dw-Printer ?in the datasheet :1 Hi-Speed USB 2.0; 1 Host USB; 1 Ethernet 10/100/1000 Gigabit network; 1 Walk-up USB

Macbook Pro mid 2009 13 inch suddenly freezes and grey screen appears stating press key to restart

Macbook Pro mid 2009 13 inch suddenly freezes and grey screen appears stating press key to restart. Here is my recent crash report. Please help me.
Anonymous UUID:
714EBD8C-083D-E200-A9BD-6F925A8F8F14
Thu May 29 22:30:04 2014
panic(cpu 0 caller 0xffffff80026dbf5e): Kernel trap at 0xffffff80026d1197, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffef8022f973c8, CR3: 0x0000000089778000, CR4: 0x0000000000000660
RAX: 0x000000000000001c, RBX: 0x00000000e00002c2, RCX: 0xffffff8002abb7d4, RDX: 0xffffef8022f973c0
RSP: 0xffffff800d2cb6a0, RBP: 0xffffff800d2cb6a0, RSI: 0x0000000000000001, RDI: 0xffffef8022f973c0
R8: 0x0000000000000001, R9: 0x0000000000000001, R10: 0xffffff8014ea65e8, R11: 0xffffff809b3160f0
R12: 0xffffef8022f973c0, R13: 0x0000000000000001, R14: 0xffffff800d2cb6ec, R15: 0x0000000000000001
RFL: 0x0000000000010202, RIP: 0xffffff80026d1197, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef8022f973c8, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff800d2cb330 : 0xffffff8002622fa9
0xffffff800d2cb3b0 : 0xffffff80026dbf5e
0xffffff800d2cb580 : 0xffffff80026f3456
0xffffff800d2cb5a0 : 0xffffff80026d1197
0xffffff800d2cb6a0 : 0xffffff80026afd0e
0xffffff800d2cb6d0 : 0xffffff8002abb751
0xffffff800d2cb710 : 0xffffff8002abb54f
0xffffff800d2cb760 : 0xffffff7f8413fd2f
0xffffff800d2cb7a0 : 0xffffff7f84188b21
0xffffff800d2cb7e0 : 0xffffff7f841708d2
0xffffff800d2cb850 : 0xffffff7f84170fc8
0xffffff800d2cb890 : 0xffffff7f8413dfea
0xffffff800d2cba10 : 0xffffff7f8416d940
0xffffff800d2cbad0 : 0xffffff7f8413cad9
0xffffff800d2cbb20 : 0xffffff8002acea56
0xffffff800d2cbb40 : 0xffffff8002ad0051
0xffffff800d2cbba0 : 0xffffff8002acdabf
0xffffff800d2cbcf0 : 0xffffff80026b66a8
0xffffff800d2cbe00 : 0xffffff8002626bf1
0xffffff800d2cbe30 : 0xffffff80026139f5
0xffffff800d2cbea0 : 0xffffff800261e043
0xffffff800d2cbf20 : 0xffffff80026c975d
0xffffff800d2cbfb0 : 0xffffff80026f3a28
Kernel Extensions in backtrace:
com.apple.GeForceTesla(8.2.4)[24ED915E-02F3-3A31-8502-6AA41FFCA420]@0xffffff7f84 12b000->0xffffff7f841f5fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[244D4E48-78E6-3369-8D76-285C66EF9BF4]@0xffffff 7f82cbe000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[B93BBFC9-9ED5-3DDD-8CED-5EDA081BB997]@0xff ffff7f8324b000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[B889D3AB-CCC0-3FCD-A83E-D2E3E4CB537B]@0 xffffff7f83208000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[6EB3FF52-A4F6-3496-AE9C-D89B00F DE504]@0xffffff7f8325b000
BSD process name corresponding to current thread: Skype
Mac OS version:
13D65
Kernel version:
Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
Kernel slide:
0x0000000002400000
Kernel text base: 0xffffff8002600000
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 60200033152435
last loaded kext at 44797399467641: com.apple.filesystems.smbfs
2.0.2 (addr 0xffffff7f84b15000, size 335872)
last unloaded kext at 15796237223278: com.apple.macos.driver.AppleUSBEthernetHost
7.0 (addr 0xffffff7f84b15000, size 20480)
loaded kexts:
net.telestream.driver.TelestreamAudio
1.1.0
com.rim.driver.BlackBerryUSBDriverInt
0.0.97
com.apple.filesystems.smbfs
2.0.2
com.apple.filesystems.ntfs
3.11
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.driver.AGPM
100.14.15
com.apple.filesystems.autofs
3.0
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.driver.AppleHDA
2.6.1f2
com.apple.driver.AppleMikeyDriver
2.6.1f2
com.apple.GeForceTesla
8.2.4
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.driver.AudioAUUC
1.60
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.iokit.IOBluetoothSerialManager
4.2.4f1
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleHWAccess
1
com.apple.driver.AppleBacklight
170.3.5
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.4f1
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin
1.0.0
com.apple.driver.AppleLPC
1.7.0
com.apple.driver.SMCMotionSensor
3.0.4d1
com.apple.driver.AppleUSBTCButtons
240.2
com.apple.driver.AppleUSBTCKeyboard
240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.driver.AppleIRController
325.7
com.apple.driver.AppleUSBCardReader
3.4.1
com.apple.iokit.SCSITaskUserClient
3.6.6
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.5.1
com.apple.driver.AirPort.Brcm4331
700.20.22
com.apple.driver.AppleFWOHCI
5.0.2
com.apple.driver.AppleUSBHub
666.4.0
com.apple.driver.AppleAHCIPort
3.0.0
com.apple.nvenet
2.0.21
com.apple.driver.AppleUSBOHCI
656.4.1
com.apple.driver.AppleUSBEHCI
660.4.0
com.apple.driver.AppleSmartBatteryManager
161.0.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleSMBIOS
2.1
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.driver.AppleIntelCPUPowerManagementClient
217.92.1
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.driver.AppleIntelCPUPowerManagement
217.92.1
com.apple.AppleGraphicsDeviceControl
3.5.26
com.apple.kext.triggers
1.0
com.apple.driver.DspFuncLib
2.6.1f2
com.apple.vecLib.kext
1.0.0
com.apple.driver.AppleHDAController
2.6.1f2
com.apple.iokit.IOHDAFamily
2.6.1f2
com.apple.nvidia.classic.NVDANV50HalTesla
8.2.4
com.apple.nvidia.classic.NVDAResmanTesla
8.2.4
com.apple.iokit.IOAudioFamily
1.9.7fc2
com.apple.kext.OSvKernDSPLib
1.14
com.apple.iokit.IOSurface
91.1
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.iokit.IOBluetoothFamily
4.2.4f1
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.4f1
com.apple.iokit.IOFireWireIP
2.2.6
com.apple.driver.IOPlatformPluginLegacy
1.0.0
com.apple.driver.AppleSMBusPCI
1.0.12d1
com.apple.driver.IOPlatformPluginFamily
5.7.0d11
com.apple.iokit.IONDRVSupport
2.4.1
com.apple.iokit.IOGraphicsFamily
2.4.1
com.apple.driver.AppleSMC
3.1.8
com.apple.driver.AppleUSBMultitouch
240.9
com.apple.iokit.IOUSBHIDDriver
660.4.0
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice
3.6.6
com.apple.iokit.IOBDStorageFamily
1.7
com.apple.iokit.IODVDStorageFamily
1.7.1
com.apple.iokit.IOCDStorageFamily
1.7.1
com.apple.iokit.IOAHCISerialATAPI
2.6.1
com.apple.iokit.IO80211Family
630.35
com.apple.iokit.IOFireWireFamily
4.5.5
com.apple.iokit.IOUSBUserClient
660.4.2
com.apple.iokit.IOAHCIFamily
2.6.5
com.apple.iokit.IONetworkingFamily
3.2
com.apple.driver.NVSMU
2.2.9
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.11
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOReportFamily
23
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.driver.AppleUSBComposite
656.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.6
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.6
com.apple.iokit.IOUSBFamily
677.4.0
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.9
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.pthread
1
com.apple.kec.corecrypto
1.0
System Profile:
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 6 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x830B, 0x4E54344743363442384842304E532D434720
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK3255GSXF, 250.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-868
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: Wireless Optical Mouse
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 6 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x830B, 0x4E54344743363442384842304E532D434720
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK3255GSXF, 250.06 GB
Serial ATA Device: MATSHITADVD-R   UJ-868
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: Wireless Optical Mouse
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:

riyazfrombangalore,
your 13-inch Mid 2009 MacBook Pro requires 1066 MHz RAM, but you have 1333 MHz RAM installed. Try replacing the 1333 MHz RAM with 1066 MHz RAM — Macs can be picky about the RAM which they find acceptable.

Macbook pro 17 inch primo 2011 and thunderbolt display crashes

I have a Macbook pro 17 inch primo 2011 and thunderbolt display which has recently started to crash.
Only modifications I have doen lately is I swapped the CD/DVD drive for a harddrive and put in 16 GB of ram
but it has been running for more than a month with these hardware additions without problems.
Today my Macbook has started to crash frequently within 10 min to 1 hour after plugging in my thunderbolt display.
I tried to check CPU heat, change RAM but it keps crashing.
When it crashes it either gives me a blue screen, a black screen or a distorts everythings and freeze up.
When rebooting I have to press Command-Option-P-R to clear NVRAM / PRAM.
I found a few support threads from people having similar problems so I started to disconnect the thunderbolt display
and without plugging it in my laptop works fine.
I have done a SMC reset also but that has not resolved my issue.
Below is the crash report and if anybody has any suggestions what to do to resolve this please let me know
My thunderbolt display was purchased in late 2011
If this is not solveable what options do I have ?
Thanks !
Interval Since Last Panic Report: 2527129 sec
Panics Since Last Report:          6
Anonymous UUID:                    5309BD58-3CBB-321E-545E-6EE6BED7E0E2
Tue Feb 5 17:02:21 2013
Machine-check capabilities 0x0000000000000c09:
family: 6 model: 42 stepping: 7 microcode: 26
Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Processor 0: machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
MCA error code:            0x0400
Model specific error code: 0x0080
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC3_ADDR(0x40e): 0x00003f7f85769a95
IA32_MC3_MISC(0x40f): 0x000000000003ffff
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 1: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
MCA error code:            0x0400
Model specific error code: 0x0080
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC3_ADDR(0x40e): 0x00003f7f85769a95
IA32_MC3_MISC(0x40f): 0x000000000003ffff
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
Package 0 logged:
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 2: no valid machine-check state
Processor 3: no valid machine-check state
Processor 4: machine-check status 0x0000000000000004:
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
MCA error code:            0x0400
Model specific error code: 0x0080
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC3_ADDR(0x40e): 0x00003f7f85fa3e1f
IA32_MC3_MISC(0x40f): 0x000000000003ffff
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 5: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0xbe00000000800400 valid
MCA error code:            0x0400
Model specific error code: 0x0080
Other information:         0x00000000
Threshold-based status:    Undefined
Status bits:
   Processor context corrupt
   ADDR register valid
   MISC register valid
   Error enabled
   Uncorrected error
IA32_MC3_ADDR(0x40e): 0x00003f7f85fa3e1f
IA32_MC3_MISC(0x40f): 0x000000000003ffff
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0x0020000000000000 invalid
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 6: no valid machine-check state
Processor 7: no valid machine-check state
panic(cpu 0 caller 0xffffff80048b83c9): "Machine Check at 0xffffff7f85769a95, registers:\n" "CR0: 0x000000008001003b, CR2: 0x000000010cd0e30c, CR3: 0x00000000072b4000, CR4: 0x00000000000606e0\n" "RAX: 0xffffff802516f800, RBX: 0xffffff802516f800, RCX: 0xffffff80253ab800, RDX: 0x0000000000000001\n" "RSP: 0xffffff8207ad3e90, RBP: 0xffffff8207ad3ec0, RSI: 0xffffff8207ad3edf, RDI: 0xffffff802520e000\n" "R8: 0xffffff8004ebec60, R9: 0x7fffffffffffff00, R10: 0xffffff8004ebdc20, R11: 0x0000000000000201\n" "R12: 0xffffff80253ab800, R13: 0xffffff81d60d2000, R14: 0xffffff8207ad3edf, R15: 0xffffff802520e000\n" "RFL: 0x0000000000010282, RIP: 0xffffff7f85769a95, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2050.18.24/osfmk/i386/trap_native.c: 280
Backtrace (CPU 0), Frame : Return Address
0xffffff800470bd20 : 0xffffff800481d626
0xffffff800470bd90 : 0xffffff80048b83c9
0xffffff800470bf00 : 0xffffff80048cedbf
0xffffff8207ad3ec0 : 0xffffff7f856d75b4
0xffffff8207ad3ef0 : 0xffffff8004c472a8
0xffffff8207ad3f30 : 0xffffff8004c45daa
0xffffff8207ad3f80 : 0xffffff8004c45ed9
0xffffff8207ad3fb0 : 0xffffff80048b26b7
      Kernel Extensions in backtrace:
         com.apple.driver.AirPort.Brcm4331(602.15.22)[5BDCA43F-AD42-3F05-BCCF-BC364D17E1 5F]@0xffffff7f856ca000->0xffffff7f858bbfff
            dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f84e72000
            dependency: com.apple.iokit.IO80211Family(500.15)[4282DF5A-86B9-3213-B9B1-675FAD842A94]@0xf fffff7f8565e000
            dependency: com.apple.iokit.IONetworkingFamily(3.0)[28575328-A798-34B3-BD84-D708138EBD17]@0 xffffff7f85015000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x0000000004600000
Kernel text base: 0xffffff8004800000
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 6197670207287
last loaded kext at 6133447331639: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f86cb5000, size 16384)
last unloaded kext at 5379727445407: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f86cb2000, size 12288)
loaded kexts:
com.apple.driver.AppleUSBCDC          4.1.22
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.filesystems.smbfs          1.8
com.apple.filesystems.afpfs          10.0
com.apple.nke.asp_tcp          7.0.0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.filesystems.ntfs          3.10
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.3.1f2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleIntelHD3000Graphics          8.0.0
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.kext.AMDFramebuffer          8.0.0
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.AMDRadeonAccelerator          1.0.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleMuxControl          3.2.11
com.apple.driver.AppleIntelSNBGraphicsFB          8.0.0
com.apple.driver.AppleUSBTCButtons          235.4
com.apple.driver.AppleUSBTCKeyboard          235.4
com.apple.driver.AppleIRController          320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AppleUSBHub          5.2.5
com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport          2.1.1
com.apple.iokit.IOFireWireSBP2          4.2.0
com.apple.security.SecureRemotePassword          1.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleSMC          3.1.4d2
com.apple.iokit.IOAcceleratorFamily          19.0.26
com.apple.kext.AMD6000Controller          8.0.0
com.apple.kext.AMDSupport          8.0.0
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.driver.AppleUSBMultitouch          235.7
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.driver.CoreStorage          274.7
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.1.1
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.I
Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 16 GB, SMC 1.70f5
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F384758334D314131333333433920
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D534F384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: APPLE SSD TS256C, 251 GB
Serial ATA Device: ST750LX003-1AC154, 750,16 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0246, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 6
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc51b, 0xfd130000 / 5
USB Device: iPhone, apple_vendor_id, 0x12a0, 0xfd120000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3
FireWire Device: My Book 111D, WD, 800mbit_speed

The other day I got the blue screen, the fan going on high, and then when I disconnect my thunderbolt connection from my macbook pro - i get a shutdown.
Today I got flickering followed by the fan on high and then again I disconneced my thunderbolt cable and after a minute or two a shudown.
This never happened before. Actually I was suprised to hear about a firmware update for flickering since that's never happened to me but since updating I now get the flicker.
Any ideas?? Any help would be greatly appreciated as this is my work labtop.

I've bought an USB-to-ethernet-adapter and a minidisplay-port-to-VGA-adapter. But I can't use them at same time. At first, I plugged those two adapters and only the USB-to-ethernet worked. Tried restarting the mac then only VGA adapter worked.

I've bought an USB-to-ethernet-adapter and a minidisplay-port-to-VGA-adapter. But I can't use them at the same time. At first, I plugged those two adapters and only the USB-to-ethernet worked. I tried restarting the mac then only the VGA-adapter worked. I also tried to reinstall the OS.
I'm using new 13-inch MacBook Air early 2015. OS X 10.10.3.

Thanks Malcolm - Do you think it might be worth trying to flash the firmware on these cases - there seem to be updaters available on Prolific's website. Obviously I'd have to do it on a PC. I've emailed Prolific asking them about my problem. No reply as yet, and I'm not holding my breath! Do you know if there are any other posts on these boards relating to Prolific? Stupid question really - I'll just do a search...
Thanks again for your post. Cheers from Bonnie Scotland.

Is this device [Shure X2u XLR-to-USB] suitable for me?

I have a Samson's Q4 XLR mike and hope to record my songs while hearing the music tracks. I have the need for an preamp which can also connect the XLR to the powered USB port on my Mac. In this context I have found this: Shure X2u XLR-to-USB.
Upon reading the reviews, I found one post which states that you cannot hear the music track when you are recording. I am giving the review I have read:
"By Zeph-5qDec
from Maryland
Follow me
Comments about Shure X2u XLR-to-USB Microphone Adapter:
... it seems to only allow 'monitoring' through headphones. Just plugging it into your computer and microphone will record fine but you can't hear the sound while you're recording. That's why it only gets 4 stars instead of 5."
I would like members who happen to be Shure X2u XLR-to-USB users, to let me know whether this review given on 9/26/2010 still holds good;
If this device, even as of now, has this 'deficiency' then it would not be meeting this need of mine: I just have to hear the music track playing when I sing.
Is there any other device in the market which will be able to meet this particular need of mine?

Thanks for this response over which you have evidently spent a lot of your time.
I feel that for a gadget priced at that range, one should be able to hear the audio playback while recording. I guess that the review was given without full assurance since it contains this shadow of doubt: ' it seems to only allow 'monitoring' through headphones'.
My guess is this: if there is a single knob for allowing the audio and mike signals for the blending, and the person had turned the knob fully for receiving only the mike input, then she would have come to the wrong conclusion that the device does not support such mixing.
Alternately, perhaps one has to also tweak the setting under sound on the Mac itself ...another angle of thought of mine.
Before I go for the buy, I wish some existing users will contribute to this post so that I need not regret any purchase which does not meet my need.

Differences between these two XLR-to-USB setups

#1: ALESIS MICLINK XLR TO USB CABLE MIC-LINK
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330350243009&ssPageName=STRK: MEWAX:IT#ht500wt956
#2: Blue Icicle XLR to USB Mic Converter/Mic Preamp
http://www.guitarcenter.com/Blue-Icicle-XLR-to-USB-Mic-Converter-Mic-Preamp-1053 15832-i1427196.gc
#1 seems to be plug and play whereas #2 needs a bunch more cables. Apparently only #2 has Phantom Power, but then what is #1 used for if not the same thing?

#1, obviously, would be to connect a mic that doesn't require phantom power.
And #2 comes with a 6 ft. USB cable, so you may not need a bunch more cables. Maybe just one standard XLR to connect a mic to it.
Message was edited by: p o'flynn

Stuck: Need Disk repair but DVD drive dead and only have USB 1

[1 Ghz flat-panel iMac with USB 1 ports (no USB 2) and also Firewire 400]
I noticed a strange discrepancy (small but concerning) between the size of a folder on hard drive (folder of all mp3's with no subfolders) and the backup of the same folder on a mounted thumb drive.
(The size difference was not due to any invisible .DS_Store files and both folders are displayed in List view format.)
Disk Utility reports three things:
1. Incorrect number of thread records
2. Volume Bit Map needs minor repair
3. Checking volume information.
Volume free block count",0) [I might have mangled this line]
(It should be 13438611 instead of 13437937)
Here is the GOOD (but these are useless as explained under the "Bad"):
- I have a Tiger 10.4 boot DVD for a repair ==>but see below
- I also have a Disk Warrior disk (never used)
Here is the BAD:
- My built-in optical drive [Pioneer DVD-RW DVR-105] is -- I now discover - defunct and DEAD - it does not run the Tiger Boot DVD (in pristine shape).
- I bought an external SuperDrive (unopened) but I believe no boot from USB 1 is possible in PowerPC so a SuperDrive with USB 1 is useless.
Questions:
1.) Is there any way to boot from some external source (optical drive is DEAD) to run Disk Utility and/or Disk Warrior? -- I see none in this case! (gulp).
2.) More importantly (and this is my fundamental concern): Do the three Disk Utility hard drive issues constitute any direct threat to the integrity of my files?
I have almost everything backed up to duplicate thumb drives over these many months as standard practice.
Are these Disk Utility errors fully isolated to hard drive directory-keeping...or do these directory damage errors pose the possibility of mangling or harming my files or their metadata (filesize, etc.).
Put another way, when files are backed-up from a hard drive under the Disk Utility reports above, do they remain unharmed and undamaged by the situations reported by Disk Utility?
Thanks,
Bill

Jeff and Michael,
Thank you both for your generous and thoughtful input.
Michael: As I slept on it overnight, the exact same idea occurred to me of trying a Target Mode to the iMac from my Lion MacbookPro (I have it but stupidly have yet to use it much!).
I did buy a Firewire 800 (MBP) to Firewire 400 (iMac) adapter cable a few months ago!
CONCERN: Would there be potential compatibility issues or risks in running Lion 10.7's Disk Utility against the hard drive of the old OSX 10.4 iMac in Target Disk Mode?
==> Assuming an "it's ok" answer to the Target Disk question, would the majority of users agree that the Target Disk Mode would be more prudent than running:
fsck -fy in Single User Mode
I have never done fsck -fy before especially because I was under the impression there were issues with Journaled drived but from what I have read today...it looks ok to do)
Jeff: Can't thank you enough for the reference to the OTW DVD drive. I might first invest $10 in one of those DVD lens cleaner disks that I've read about. It's probably not the issue or else why would the drive read commercial Music cds perfectly well!
Thanks,
Bilil

Device not working after updating from 8 to 8.1: SMK Ehome Infrared Transceiver and remote control (usb)

Hi all,
An excellent 2015 to you all.
I wonder whether it's possible to get my (USB) SMK Ehome Infrared transceiver (which serves to connect my PC to a remote control) to work again. It functioned okay under Windows 8, but when I upgraded my system to Windows 8.1 it didn't respond anymore.
How's that possible? And do you have any ideas how I can resolve this?
I use the remote control to start and stop videos and to adjust the sound volume.
What I have done already:
-disabled and enabled the consumer IR devices under 'HID devices' in device management.
-disabled and enabled the USB controller for the Ehome Infrared Receiver.
No luck so far. Anybody knows what to do?
Cheers,
Peter

Hi,
What is the driver status in device manager? Have you tried to manually download the right version driver for Windows 8.1 from the transceiver's manufacture website and install it in your system?
Meanwhile, please run services.msc to launch services manager, then scroll down to "Human Interface Device Access service", make sure the service is "started" to "manual" or "automatic", test the issue again.
Yolanda Zhu
TechNet Community Support
Thanks, Yolanda Zhu. There is no driver on the manufacturer's website, but the driver is included from Windows versions XP to 8 and the device responds as expected under these OS Versions. In Windows 8.1 it seems also to be included, and device manager
indicates under Human Interface Devices that the 'Microsoft eHome infra transceiver' driver functions correctly and under
Universal Serial Bus controllers that 'eHome infrared receiver' (USBCIR) functions correctly as well. But when I press the remote, the red LED blinks, but nothing else happens.
The "Human Interface Device Service" is set to automatic and is being executed.
Can it be that the mapping ('action on remote' to 'action on PC') is lost somehow?
Cheers,
Peter AKA Django

I have no mouse or keyboard. I have tried USB and wireless. Help?

How can I get back control of my commuter? Cursor floats with mouse, but no clicking. I have used USB and wireless mouses and keyboards. Keyboard will "wake" but no other function . 2011 iMac 27. what can I do?

These are the instructions:
http://support.apple.com/kb/PH3878?viewlocale=en_US
Where does the problem occur? What happens?
Ciao,

I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.

BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton

[Kernel] USB and network trouble

Hey all, i have some trouble getting my system fully running.
I have a built in 3com network card, it uses the 3c59x module in the kernel (got it build into the kernel). I also have a usb cd writer. When i start writing my network fails after sometime. I came from vectorlinux to arch. In VL it worked without a prob. Here check my dmesg output. The most interesting is at the end.
chitecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0808)
checking if image is initramfs... it is
Freeing initrd memory: 567k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfed9b, last bus=21
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI-0169: *** Error: No object was returned from [_SB_.LNKA._STA] (Node d3fdef00), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.LNKB._STA] (Node d3fdee00), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.LNKC._STA] (Node d3fded00), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.LNKD._STA] (Node d3fdec00), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.FDD_._STA] (Node c12f75a0), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.COM_._STA] (Node c12f7460), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.PRT_._STA] (Node c12f72e0), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.PRT1._STA] (Node c12f7200), AE_NOT_EXIST
ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.PCC0._STA] (Node c12f7fe0), AE_NOT_EXIST
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI-0169: *** Error: No object was returned from [_SB_.LNKE._PRS] (Node c12fc780), AE_NOT_EXIST
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: Power Resource [PIHD] (on)
ACPI: Power Resource [PMHD] (off)
ACPI: Power Resource [PDOC] (off)
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [PFAN] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI-0169: *** Error: No object was returned from [_SB_.MEM_._CRS] (Node c12fc6a0), AE_NOT_EXIST
pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
PCI: setting IRQ 13 as level-triggered
pnp: PnP ACPI: found 9 devices
SCSI subsystem initialized
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to [email protected]
** so I can fix the driver.
ACPI-0169: *** Error: No object was returned from [_SB_.MEM_._CRS] (Node c12fc6a0), AE_NOT_EXIST
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: overridden by ACPI.
devfs: 2004-01-31 Richard Gooch ([email protected])
devfs: boot_options: 0x1
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
acpiphp_glue: can't get bus number, assuming 0
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 262M
agpgart: AGP aperture is 256M @ 0xd0000000
vesafb: framebuffer at 0xf0000000, mapped to 0xd4900000, using 6144k, total 8192k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:8751
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Fan [FAN] (off)
ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRM] (66 C)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
elevator: using anticipatory as default io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
ACPI: PCI interrupt 0000:00:0f.0[A]: no GSI - using IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0f.0: 3Com PCI 3c905C Tornado at 0xfb00. Vers LK1.1.19
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:05.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK1516GAP, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 23579136 sectors (12072 MB), CHS=23392/16/63, UDMA(33)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PCI: Enabling device 0000:00:0b.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:00:0b.0[A]: no GSI
Yenta: CardBus bridge found at 0000:00:0b.0 [1179:0001]
Yenta: ISA IRQ mask 0x0cb8, PCI irq 0
Socket status: 30000007
PCI: Enabling device 0000:00:0b.1 (0000 -> 0002)
ACPI: PCI interrupt 0000:00:0b.1[b]: no GSI
Yenta: CardBus bridge found at 0000:00:0b.1 [1179:0001]
Yenta: ISA IRQ mask 0x0cb8, PCI irq 0
Socket status: 30000007
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:05.2[D]: no GSI - using IRQ 11
uhci_hcd 0000:00:05.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:05.2: irq 11, io base 0xff80
uhci_hcd 0000:00:05.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 06 Dec 2004
usb 1-2: new full speed USB device using uhci_hcd and address 2
usbaudio: device 2 audiocontrol interface 0 has 1 input and 0 output AudioStreaming interfaces
usbaudio: valid input sample rate 8000
usbaudio: valid input sample rate 48000
usbaudio: valid input sample rate 44100
usbaudio: valid input sample rate 22050
usbaudio: valid input sample rate 11025
usbaudio: device 2 interface 1 altsetting 1: format 0x00000010 sratelo 8000 sratehi 48000 attributes 0x01
usbaudio: valid input sample rate 8000
usbaudio: valid input sample rate 48000
usbaudio: valid input sample rate 44100
usbaudio: valid input sample rate 22050
usbaudio: valid input sample rate 11025
usbaudio: device 2 interface 1 altsetting 2: format 0x80000010 sratelo 8000 sratehi 48000 attributes 0x01
usbaudio: registered dsp 14,3
usbaudio: constructing mixer for Terminal 2 type 0x0101
usbaudio: registered mixer 14,0
usb_audio_parsecontrol: usb_audio_state at d3cb6560
usbcore: registered new driver audio
drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC).
ACPI: PCI interrupt 0000:00:0c.0[A]: no GSI - using IRQ 11
es1968: clocking to 48000
unable to register OSS PCM device 0:0
unable to register OSS mixer device 0:0
ALSA device list:
#0: ESS ES1978 (Maestro 2E) at 0xfc00, irq 11
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
ACPI wakeup devices:
USB VIY0 VIY1 MODM LAN LAN2 LID
ACPI: (supports S0 S1 S3 S4 S4bios S5)
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 192k freed
Adding 40120k swap on /dev/discs/disc0/part5. Priority:-1 extents:1
Adding 128480k swap on /dev/discs/disc0/part7. Priority:-2 extents:1
Adding 128480k swap on /dev/discs/disc0/part8. Priority:-3 extents:1
Real Time Clock Driver v1.12
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
Disabled Privacy Extensions on device c04cd0e0(lo)
eth0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
usb 1-1: new full speed USB device using uhci_hcd and address 3
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: LITE-ON Model: LTR-48246K Rev: SKS7
Type: CD-ROM ANSI SCSI revision: 00
sr0: scsi3-mmc drive: 207x/48x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
usb-storage: device scan complete
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
scsi: unknown opcode 0x01
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cf6 media 8880 dma 0000003a fifo 8000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 1328(0) current 1328(0)
Transmit list 00000000 vs. d3c97200.
0: @d3c97200 length 8000049c status 0c01049c
1: @d3c972a0 length 8000049c status 0c01049c
2: @d3c97340 length 8000004d status 0c01004d
3: @d3c973e0 length 8000004d status 0c01004d
4: @d3c97480 length 80000049 status 0c010049
5: @d3c97520 length 80000049 status 0c010049
6: @d3c975c0 length 8000002a status 0001002a
7: @d3c97660 length 80000049 status 0c010049
8: @d3c97700 length 8000002a status 0001002a
9: @d3c977a0 length 8000002a status 0001002a
10: @d3c97840 length 8000004d status 0c01004d
11: @d3c978e0 length 8000002a status 0001002a
12: @d3c97980 length 8000002a status 0001002a
13: @d3c97a20 length 8000002a status 0001002a
14: @d3c97ac0 length 8000002a status 8001002a
15: @d3c97b60 length 8000002a status 8001002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cf6 media 8880 dma 0000003a fifo 0000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 1344(0) current 1344(0)
Transmit list 00000000 vs. d3c97200.
0: @d3c97200 length 8000002a status 0001002a
1: @d3c972a0 length 8000002a status 0001002a
2: @d3c97340 length 8000002a status 0001002a
3: @d3c973e0 length 8000002a status 0001002a
4: @d3c97480 length 80000036 status 00010036
5: @d3c97520 length 80000036 status 00010036
6: @d3c975c0 length 80000036 status 00010036
7: @d3c97660 length 80000036 status 00010036
8: @d3c97700 length 80000036 status 00010036
9: @d3c977a0 length 80000036 status 00010036
10: @d3c97840 length 80000036 status 00010036
11: @d3c978e0 length 80000047 status 0c010047
12: @d3c97980 length 80000082 status 00010082
13: @d3c97a20 length 8000004e status 0001004e
14: @d3c97ac0 length 8000004e status 8001004e
15: @d3c97b60 length 8000004e status 8001004e
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cf6 media 8880 dma 0000003a fifo 0000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 1360(0) current 1360(0)
Transmit list 00000000 vs. d3c97200.
0: @d3c97200 length 80000080 status 00010080
1: @d3c972a0 length 8000004a status 0001004a
2: @d3c97340 length 80000055 status 0c010055
3: @d3c973e0 length 8000004a status 0001004a
4: @d3c97480 length 8000002a status 0001002a
5: @d3c97520 length 8000002a status 0001002a
6: @d3c975c0 length 8000002a status 0001002a
7: @d3c97660 length 80000055 status 0c010055
8: @d3c97700 length 8000002a status 0001002a
9: @d3c977a0 length 8000006c status 0001006c
10: @d3c97840 length 80000036 status 00010036
11: @d3c978e0 length 80000036 status 00010036
12: @d3c97980 length 80000049 status 0c010049
13: @d3c97a20 length 80000051 status 0c010051
14: @d3c97ac0 length 80000049 status 8c010049
15: @d3c97b60 length 80000051 status 8c010051
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e601.
diagnostics: net 0cf6 media 8880 dma 0000003a fifo 0000
eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
Flags; bus-master 1, dirty 1376(0) current 1376(0)
Transmit list 00000000 vs. d3c97200.
0: @d3c97200 length 80000049 status 0c010049
1: @d3c972a0 length 80000051 status 0c010051
2: @d3c97340 length 800000ae status 000100ae
3: @d3c973e0 length 800000ae status 000100ae
4: @d3c97480 length 80000042 status 00010042
5: @d3c97520 length 8000006b status 0001006b
6: @d3c975c0 length 8000006b status 0001006b
7: @d3c97660 length 80000080 status 00010080
8: @d3c97700 length 8000004e status 0001004e
9: @d3c977a0 length 80000080 status 00010080
10: @d3c97840 length 8000004e status 0001004e
11: @d3c978e0 length 80000080 status 00010080
12: @d3c97980 length 80000080 status 00010080
13: @d3c97a20 length 8000006b status 0001006b
14: @d3c97ac0 length 80000051 status 8c010051
15: @d3c97b60 length 8000004a status 8001004a
eth0: Resetting the Tx ring pointer.
eth0: no IPv6 routers present
When my network is down, the onlything to restore is is rebooting my computer. Restarting the network daemon does not work. Currently i don't have hotplug running, but with hotplug i encounter the same problem.
I hope anybody can help me.
Greetinx Atze

It looks like the problem is with ACPI or you have a hardware IRQ conflict..
check for a bios update for your Motherboard and check the bios settings.
It might also help if you moved network card to another pci-slot.

1/4 inch to USB and XLR to USB

Similar Messages

Maybe you are looking for