1.4 update deletes bluetooth

Post updating to 1.4 my sony bluetooth now does not work with my Iphone... <Edited by Moderator>

vngstr,
Where did you get 1.4? I doubt there will be a 1.4 given that the features for 2.0 were announced on Thursday, and planned for June release.
If you are referring to 1.1.4, I have already made some suggestion in this thread:
http://discussions.apple.com/thread.jspa?threadID=1431236
EDIT: Backspaced to much out of the URL before.
Hope this helps,
Nathan C.
Message was edited by: Nathan C

Similar Messages

  • Insert/Update/Delete Non-PO Invoice Line Item via FM/BAPI?

    Does anyone know of a way to insert/update/delete an Invoice Line item (Non-PO Accounting Invoice - Transaction FB60 or FV60) using a BAPI or Function Module (or set of function modules) using ABAP? I have been trying to find some code to accomplish this and am stuck on a couple of issues.
    I have found PRELIMINARY_POSTING_FB01 and PP_CHANGE_DOCUMENT_ENJ but both seem to submit the details to background processes. This is an issue because it gives the user a success message after execution but later delivers the error to Workflow. This is for an interfacing program so the results should be as real time as possible.
    Has anyone accomplished this via FM or BAPI and if so would you mind sharing your experiences?
    Thank you very much,
    Andy

    SG- Thank you for the reply.
    I have been playing with BAPI_INCOMINGINVOICE_PARK and I'm not sure if it is doing exactly what we want, but it is something that I have considered in the past. I plan on looking into BAPI_ACC_INVOICE_RECEIPT_POST this morning, hopefully that will provide some more for us.
    If possible I'd like to avoid BDC sessions because this program could hypothetically interface with multiple SAP systems with different configurations.
    I will check into those FM's and thank you very much.

  • Unable to update Thinkpad Bluetooth SW on Windows 7, 6.2.1.1401 update dated 22 June 2010

    Can anyone help me update my Bluetooth SW for Windows 7 32-bit? I tried to load Lenovo's latest software update from their website and receive a Windows 7 1935 error message: an error occurred during installation of assembly. Phone support is Atlanta was not able to help stating the two options I have are the Lenovo download that did not work, or using my ThinkVantange System Update Tool that will not update to this version. My current bluetooth SW driver version is for 2008 when I had Vista OS. I basically am trying to get a bluetooth headset (Motorola H17txt) to work with my computer. It pairs, but does not even function as a headset. The bluetooth headset functions properly on my other laptop using Windows XP. Thanks, Jeff

    What version of Bluetooth software do you currently have installed?
    Did you try uninstalling the Bluetooth software before installing the newer version?

  • IPHONE 4 – UPDATE ISSUE – IOS 7 UPDATE DELETED ALL THE CONTACTS : PLEASE HELP! PLEASE HELP!

    Hello Everyone,
    Following are the seemingly essential details in regards to this discussion :
    iPhone Model = 4
    Purchase Date = 05.Jan.2011
    Initial Activation Remark = I used my gmail email account to add contacts initially. But phone always failed to sync (back) with gmail after the initial setup. As in if I make any changes in the iPhone’s Contact List, it won’t automatically be saved to my gmail account. But I thought to keep a full phone back up on my MacBook Pro will be safer option as well.
    Latest Full Phone Backup Date = 19.Sep.2013 [via iTunes-11 on MacBook Pro-OS X 10.8.2]
    iOS 7 Update Date = 20.Sep.2013
    >>>[It went "On" Automatically when I touched to read the details, and could not stop once it got initiated - Actually I wanted to wait until some reviews were out. ****.]
    Problem = iOS 7 update deleted all the Contacts that were originally saved on the iPhone.
    Tried & Failed = I tried to restore from the available 19.Sep.2013 backup from my MacBook Pro. It restored everything but still NO CONTACTS. If I add email [orginal gmail] account's contacts then it does not show the contacts that I saved on the phone locally; around 1100.
    I am in the great trouble because my 1100+ contact list just zeroed by this new update.
    [Also, my iCloud all got screwed up. I had earlier used my wife's credit card to register for iTunes, and now my account got her name all over it. There is no option to change the name on icloud.com. I will start a new discussion for this problem.] Though I am trying not to lash out on Apple (for now), but I think that it is seriously getting into my nerves.
    Could anyone please help me to get my contacts back? I will be eternally grateful.
    I still got the Full iPhone Backup on my MacBook Pro that I did just before the update.
    Please help. Thank you!

    Yes, I did.
    It restored everything [incl. photos] but phone contacts.
    And, after restoration the iOS was still 7.
    I tried twice but still no phone contacts.
    Please help me to get my phone contacts back!

  • IPHONE 4 – UPDATE ISSUE – IOS 7 UPDATE DELETED ALL THE CONTACTS : PLEASE HELP!

    Hello Everyone,
    Following are the seemingly essential details in regards to this discussion :
    iPhone Model = 4
    Purchase Date = 06.Jan.2011
    Initial Activation Remark = I used my gmail email account to add contacts initially. But phone always failed to sync (back) with gmail after the initial setup. As in if I make any changes in the iPhone’s Contact List, it won’t automatically be saved to my gmail account. But I thought to keep a full phone back up on my MacBook Pro will be safer option as well. 
    Latest Full Phone Backup Date = 19.Sep.2013 [via iTunes-11 on MacBook Pro-OS X 10.8.2]
    iOS 7 Update Date = 20.Sep.2013 [It went "On" Automatically when I touched to read the details, and could not stop once it got initiated - Actually I wanted to wait until some reviews were out. ****.]
    Problem = iOS 7 update deleted all the Contacts that were originally saved on the iPhone.
    Tried & Failed = I tried to restore from the available 19.Sep.2013 backup from my MacBook Pro. It restored everything but still NO CONTACTS. If I add email [orginal gmail] account's contacts then it does not show the contacts that I saved on the phone locally; around 1100.
    I am in the great trouble because my 2600+ contact list just zeroed by this new update. [Also, my iCloud all got screwed up. I had earlier used my wife's credit card to register for iTunes, and now my account got her name all over it. There is no option to change the name on icloud.com. I will start a new discussion for this problem.] Though I am trying not to lash out on Apple (for now), but I think that it is seriously getting into my nerves.
    Could anyone please help me to get my contacts back? I will be eternally grateful. 
    I still got the Full iPhone Backup on my MacBook Pro that I did just before the update.
    Please help. Thank you!

    Yes, I did.
    It restored everything [incl. photos] but phone contacts.
    And, after restoration the iOS was still 7.
    I tried twice but still no phone contacts.
    Please help me to get my phone contacts back!

  • How to find out who made inserts/updates/deletes made to a SQL Table

    I want to know WHO MAKES INSERTS/UPDATES/DELETES TO a particular SQL Table. Bascially I want to AUDIT ANY Edites made to a SQL 2008 TABLE. I need info such as WHO AMDE THE Updates i.e. the user first/lastname, When update was made, what row was updated etc...How
    can I do that with SQL 2008?

    One way to achieve that would be to use triggers to detect when a change is made to the table, and then insert a record into another table/database detailing what changed and who by.
    You'd need three triggers, one for insert, update and delete respectively, and for each of those you use the "inserted" and "deleted" tables (system tables maintained by SQL) to retrieve what has been done. To retrieve who made the change you can query IDENT_CURRENT
    which returns the last identity value for a specific table.
    See :
    Triggers -
    http://msdn.microsoft.com/en-gb/library/ms189799(v=sql.100).aspx
    Inserted & deleted tables -
    http://technet.microsoft.com/en-us/library/ms191300(v=sql.100).aspx
    INDENT_CURRENT -
    http://technet.microsoft.com/en-us/library/ms175098(v=sql.100).aspx
    There may be better / more up to date ways to do this, but I've used this method successfully in the past, albeit a long time ago (on a SQL 2000 box I think!).

  • I want a user to only be able to update/delete the rows they inserted

    hi guys,
    I have a table 2 users are inserting into. They can also update/delete the rows in the table. However, I do not want them to be able to update/delete the others users row. I only want them to have update/delete at the row level.
    how can this be achieved?
    thanks

    Another idea if you really have just two (or a fixed set of N) users.
    Does your table have a generic primary key (PK)?
    You could use two (N) sequences having two (N) distinct sets of numbers as e.g user a is using sequences less than 1000000000, the other one values larger or equal to 1000000000.
    create sequence <user_a>.pk_seq start with 0;
    create sequence <user_b>.pk_seq start with 1000000000;An insert trigger uses <user_a>.pk_seq or <user_b>.pk_seq for generating the PK depending upon the current user for new records.
    An update trigger allows updates only, if the PK of the record to be updated is in the range of sequences belonging to the current user.

  • Itunes update deleted msvcr80 dll. file

    My latest itunes update deleted the msvcr80 dll. file.   Itunes suggested uninstalling and then reinstalling itunes.  However, now the reinstall will not work.
    I have a windows 7 64 bit OS.

    Hi natsbh,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • How to display the result of  excutions(insert/update/delete rows)

    Hello.
    Does anyone know how to display the result of scenario executions just like a scenario executions tab of package (insert/update/delete rows) in other screen (in the intergated operating platform for operators using http)
    In additional, I also like to show the hierarchy of scenario in the same view.
    So, I need the query using the information of the ODI repository.
    If it is possible, I also like to have the decription of the tables in the ODI repository.
    Can anyone tell me how can I get the information of the counts of excution?
    Thanks in advance.

    Hi,
    You can get that information from the API getPrevStepLog. Does it work for you?
    Download the last API reference manual from:
    http://www.oracle.com/technology/products/oracle-data-integrator/10.1.3/htdocs/1013_support.html#docs

  • Using Case statement to insert,update,delete  the tables

    Hi All,
    I have to check the databse ,
    if it is developement then
    insert/update/delete values in tables;
    if it staging then
    insert/update/delete values in tables;
    if it is production then
    insert/update/delete values in tables;
    thers is function available to check the current database
    For doing the about i am trying to write CASE statement like this
    SELECT function,
    case
    when fun = 'developement' then insert into table1 values ('abcd','1234')
    when fun = 'staging' then insert into table1 values ('abcd','1234')
    when fun= 'production' then insert into table1 values ('abcd','1234')
    else null
    from dual
    its throughing me an error
    please help
    Thanks,

    Hi,
    You can use CASE staement any place where an expression is expected.
    For example, in:
    UPDATE  table_a
    SET     col1 = exp1
    ,       col2 = exp2
    WHERE   exp3 = exp4;all the expressions are labled lke expn.
    Note that table_a, col1 and col2 are not expressions: you must hard-code these names, or use dynamic SQL.
    So it's okay to say:
    UPDATE  table_a
    SET     col1 = CASE
                       WHEN  db = 'development'  THEN  0
                       WHEN  db = 'staging'      THEN  1
                   END
    ,       col2 = CASE
                       WHEN  db = 'development'  THEN  NULL
                       WHEN  db = 'staging'      THEN  col2
                   END
    WHERE   db != 'production';In this example:
    in the development database, col1 is set to 0 and col2 is set to NULL
    in the staging database, col1 is set to 1 and col2 is unchanged (that is, set to what it already was)
    in the production database, nothing is changed (the WHERE condition is always FALSE)

  • Making  Statistics to Discover the use % of Select/Update/Delete

    Hi,
    I have a small database, and I'd like to do a Statistics about the use of Select/Update/Delete. I hear about two ways.
    1-) Using Audit
    2-) Reading the Archives though package DBMS_LOGMner
    What way do u suggest to me ?
    If anyone have links and more information how I can do this statistics, could post it here ?
    Thank you.
    Fernando.

    2-) Reading the Archives though package DBMS_LOGMnerWell, if the database is not in archivelog mode, you can only read the online redo logs, therefore, missing the historical information.
    The best and simpliest solution to implement auditing.
    Jaffar
    Message was edited by:
    Syed Jaffar

  • Check each and every record during update/delete

    Hi,
    I have forms 10g I made one tabuler form and want to apply certain restrictions like after two days update or deletes are not allowed how can I check this for each and every record in tabuler form during updation/deletion.
    2- If the record does not meet my criteria how can I skip saving/updating record.
    Thanks in advance.
    Khawar
    Message was edited by:
    S. Khawar

    As you already storing the data for created date/time, it’s quite easy now to check date/time before deleting or updating
    Need 2 triggers to write on the specific block.
    1)     PRE-INSERT
    2)     PRE-DELETE
    The Trigger code as follows in both triggers
    Declare
         No_Days Number;
    Begin
         Select Nvl(Trunc (Sysdate - Created_datetime),0)
         Into No_Days
         From <Table Name>
         Where :<Form Column Name> = <DB Column Name>
    If No_Days >= 2 then
    Raise Form_Trigger_Failure;
    End If;
    End;
    Cheers
    Ayaz

  • As i am fresher Please share the doc of ECMA script using java script in SharePoint 2013 also how we can insert,update,delete records in list using ECMA script.

    As i am fresher Please share the doc of ECMA script using java script in SharePoint 2013 step by step also how we can insert,update,delete records in list using ECMA script.
    Thanks and Regards, Rangnath Mali

    Hi,
    According to your post, my understanding is that you want to use JavaScript to work with SharePoint list.
    To create list items, we can create a ListItemCreationInformation object, set its properties, and pass it as parameter to the addItem(parameters) function
    of the List object.
    To set list item properties, we can use a column indexer to make an assignment, and call the update() function so that changes will take effect when you callexecuteQueryAsync(succeededCallback,
    failedCallback). 
    And to delete a list item, call the deleteObject() function on the object. 
    There is an MSDN article about the details steps of this topic, you can have a look at it.
    How to: Create, Update, and Delete List Items Using JavaScript
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Db adapter insert/update/delete output variable

    Hi
    How can I know how many records have been updated after an insert/update/delete operation done using the db adapter?
    I was looking for an output variable to use in the invoke activity of a partnerlink created using the db adapter wizard (update operation), but seems not possible to associate an outpout variable. the update operation is a one way operation. So, what could I do to know how many records was updated?
    thanks bye Paolo

    The input variable specifies the records to be updated/inserted. If you count these ones, you know how many have been updated. Otherwise the Invoke will fail.
    Marc

  • Insert/Update/Delete in forms6i using Objects table in Oracle9i server

    I am using Oracle 9i server and dev 6i (forms6i).
    i have a form based on Object tables (including REF's items). when i try to insert update, delete the reocrd in the form, it gives error.
    Insert/Update/Delete failed because of OCI_22132: hexadecimal string does not corresopond to a valid REF.
    when i remove REFs items from form (not from database) then it does all functions (insert,update,delete,query).
    Actually i haved used this form with Oracle 8i and it did all functions(insert,update,delete,query). i am using the same tables and types definations in Oracle 9i but it is not working.
    Note: Insert, Update, Delete, or Query is not being done through forms when using REFs items. Others tools like sql*plus are performing the same actions very well.
    Please help.
    I will be thankful to you.
    M. Faisal.

    user563114,
    As James (padders) told you in his reply to a similar question that you posted (Typed tables is treated in the same way as a relational table?) in the Typed tables is treated in the same way as a relational table? forum, the only way you can tell for sure is to try it out both ways, measure and compare the times.
    Of-course, there are many factors that effect the time, apart from whether you use a nested table or a regular table.
    Good Luck,
    Avi.

Maybe you are looking for