1.5.1 or MacPro changes font in all my books

I have just upgraded to a new MacPro and also Aperture to 1.5.1, after this I have noticed that all the fonts in my books are different. They were all the standard book design fonts with no changes from me, but now they are all different (Lucida Grand I think) and look ugly.
I cannot be sure if this happened after the Aperture 1.5.1 upgrade (in which case it's an Aperture bug) or the transfer to my MacPro (in which case the font could be missing).
Can anyone tell me what the original font was for the book designs so that I can manually fix this problem? The Themes are Stock Book Large Hard Cover.

my hardcover book is baskerville.

Similar Messages

Have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.

have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely

Dear Zak,
thank you very much! Your information solved the problem immediately!
Best regards,
Philipp Frank
New website
www.philippfrank.at<http://www.philippfrank.at>
Dipl Ing Philipp Frank
1010 Wien
Jakobergasse 4/14
+43 1 513 22 83 19
+43 650 250 5000
[email protected]<mailto:[email protected]>
www.philippfrank.at
Von: Zak Williamson (Adobe)
Gesendet: Montag, 23. Juni 2014 20:40
An: Dipl Ing Philipp Frank
Betreff: have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
created by Zak Williamson (Adobe)<https://forums.adobe.com/people/ZakWilliamson%28Adobe%29> in Help with using Adobe Muse CC - View the full discussion<https://forums.adobe.com/message/6488371#6488371>

Changing Font Size in Address Book 6.1

This seems like such a basic question to ask but I can't figure it out: How can I change the font size in Addres Book 6.1? There no longer seems to be a way to do this in Address Book Preferences.

Address Book offers three choices: small, medium and large!
Address Book Preferences/General/Font Size.

Changing fonts on all pages in Aperture book

Hi there - anyone know if it is possible to change the font for ALL the pieces of text in one go, in an Aperture book?
At the moment, all I am able to do is to change them page by page.
Also, can one edit the page numbers text - font and size?
Thanks!

Here are a few ideas for you to consider...
If you decide to do find/replace, back up your pages first.
This might be the perfect time to deliver that div's content
via SSI
(Server side include)
(will pay off in the future as well)
You might just rename your new images with the old image
names
(will only work if they are the same size and no change in
the alt text is
required)
"mobirdman" <[email protected]> wrote in
message
news:fvaiuk$4r6$[email protected]..
> I've done this before but can't remember how I did it...
>
> I have just changed a div that contains 5 images that
are linked to
> different
> pages and they all have "behaviors"....swap image/swap
image restore. I
> had to
> remove the images and replace them with other images.
>
> I have redone all the links on the index page, but I
don't want to
> replicate
> my work on the other 11 pages of the site.
>
> Isn't there someway (oops, forgot...I'm in DW CS3) to
highlight the
> particular
> links and js on the index page, then do a "sitewide" or
"global" change
> that
> will add the changes to the rest of the site?
>
> Thanks in advance for any assistance.....
>
> David Bird
>

Changing fonts in all slides, Changing fonts in all slides

Hello, I have 80 slides I'd like to change the font in all slides to a simpler font. I'm using chalkduster font on iPad, how can I change it? Can I make 1 change or must I go through every slide?

Did you solve this font issue with Keynote? I just finished a huge presentation, uploaded it to the cloud and now realize the font I used on my iMac is NOT on keynote...go figure! So, now all the capitalization is screwy and inconsistent. don't want to recreate all fonts box by box.

Change font for entire photo book?

Hello,
I'm currently creating a new photo book in Aperture 3.4
I would like to change the font for the text boxes to something else.
Can this be done in one action/command?
Or is it possible to change the default font (and size) that is used?
I now have to change the font and size for every text box I want to use.
Kind regards,
emeu1

I have the same question: is there a way to globally change the font in a Aperture photo book? Bumpity-bump-bump-bump. Thank you.

How can I change the fonts in my address book? I'd like to change them to make fun mailing labels.

How can I change fonts in my address book so I can print clever mailing labels?

Hello, I think you'll have to Export them & use another Application...
How to Export Your Mac OS X Mail Address Book Contacts to a CSV File...
Export Your Mac OS X Mail Address Book Contacts to a CSV File
To save your contacts from the Mac OS X Address Book to a CSV (comma-separated values) file, which lets you import the data to many other address books:
Download and install AB2CSV.
Open AB2CSV.
Select Mode | CSV from the menu.To configure which fields will be exported, you can select AB2CSV | Preferences… from the menu and go to the CSV tab.
Now select File | Export from the menu.
Go to your Documents folder.
Click Choose.
The exported address book contacts are saved to a file called "everyone.csv" in your Documents folder.
http://email.about.com/od/macosxmailtips/qt/How-To-Export-Your-Mac-Os-X-Mail-Add ress-Book-Contacts-To-A-Csv-File.htm
Then again, AB can be imported into...
Might look into NeoOffice...
http://www.neooffice.org/
Or Open Office...
http://porting.openoffice.org/mac/download/index.html
And most likely MS Office.

How do I change font and colors back to default?

I have changed the font and color of the text through the tools button and the options button and the content tab. I find nothing telling me how to change the font and colors back to default font and colors. Can you advise me? I'm using Windows 7 Home Premium OS. Thanks.

Hi Brenda19605,
You can use this article to set the fonts and colors: https://support.mozilla.org/en-US/kb/change-fonts-and-colors-websites-use?esab=a&s=font&r=0&as=s
The default settings for the font are in this article:
https://support.mozilla.org/en-US/kb/Some%20text%20shows%20up%20bold%20after%20upgrade
Unfortunately for the default colors has no good reference. But for text it is black (most lower left) color, background is white (most upper left color). Unvisited links is blue (column 8, row 5) and visited link is purple (column 9, row 5).
Let me know if you need anymore help!
Lordfreak

Email will not let me change fonts all of a sudden.

Email will not let me change fonts all of a sudden. It says I don't have the neccesay permissions in ~/library/preferences. this has just happened recently.

Who is your email provider?
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
If yes, try deleting the mail account and adding it again.

How to change font/ font color etc in a graphic object using JCombobox?

Hello
My program im writing recently is a small tiny application which can change fonts, font sizes, font colors and background color of the graphics object containing some strings. Im planning to use Jcomboboxes for all those 4 ideas in implementing those functions. Somehow it doesnt work! Any help would be grateful.
So currently what ive done so far is that: Im using two classes to implement the whole program. One class is the main class which contains the GUI with its components (Jcomboboxes etc..) and the other class is a class extending JPanel which does all the drawing. Therefore it contains a graphics object in that class which draws the string. However what i want it to do is using jcombobox which should contain alit of all fonts available/ font sizes/ colors etc. When i scroll through the lists and click the one item i want - the graphics object properties (font sizes/ color etc) should change as a result.
What ive gt so far is implemented the jcomboboxes in place. Problem is i cant get the font to change once selecting an item form it.
Another problem is that to set the color of font - i need to use it with a graphics object in the paintcomponent method. In this case i dnt want to create several diff paint.. method with different property settings (font/ size/ color)
Below is my code; perhaps you'll understand more looking at code.
public class main...
Color[] Colors = {Color.BLUE, Color.RED, Color.GREEN};
        ColorList = new JComboBox(Colors);
ColorList.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent ev) {
                 JComboBox cb = (JComboBox)ev.getSource();
                Color colorType = (Color)cb.getSelectedItem();
                drawingBoard.setBackground(colorType);
          });;1) providing the GUI is correctly implemented with components
2) Combobox stores the colors in an array
3) ActionListener should do following job: (but cant get it right - that is where my problem is)
- once selected the item (color/ font size etc... as i would have similar methods for each) i want, it should pass the item into the drawingboard class (JPanel) and then this class should do the job.
public class DrawingBoard extends JPanel {
       private String message;
       public DrawingBoard() {
              setBackground(Color.white);
              Font font = new Font("Serif", Font.PLAIN, fontSize);
              setFont(font);
              message = "";
       public void setMessage(String m) {
            message = m;
            repaint();
       public void paintComponent(Graphics g) {
              super.paintComponent(g);
              //setBackground(Color.RED);
              Graphics2D g2 = (Graphics2D) g;
              g2.setRenderingHint
              g2.drawString(message, 50, 50);
       public void settingFont(String font) {
            //not sure how to implement this?                          //Jcombobox should pass an item to this
                               //it should match against all known fonts in system then set that font to the graphics
      private void settingFontSize(Graphics g, int f) {
                     //same probelm with above..
      public void setBackgroundColor(Color c) {
           setBackground(c);
           repaint(); // still not sure if this done corretly.
      public void setFontColor(Color c) {
                //not sure how to do this part aswell.
               //i know a method " g.setColor(c)" exist but i need to use a graphics object - and to do that i need to pass it in (then it will cause some confusion in the main class (previous code)
       My problems have been highlighted in the comments of code above.
Any help will be much appreciated thanks!!!

It is the completely correct code
I hope that's what you need
Just put DrawingBoard into JFrame and run
Good luck!
public class DrawingBoard extends JPanel implements ActionListener{
     private String message = "message";
     private Font font = new Font("Serif", Font.PLAIN, 10);
     private Color color = Color.RED;
     private Color bg = Color.WHITE;
     private int size = 10;
     public DrawingBoard(){
          JComboBox cbFont = new JComboBox(GraphicsEnvironment.getLocalGraphicsEnvironment().getAvailableFontFamilyNames());
          cbFont.setActionCommand("font");
          JComboBox cbSize = new JComboBox(new Integer[]{new Integer(14), new Integer(13)});
          cbSize.setActionCommand("size");
          JComboBox cbColor = new JComboBox(new Color[]{Color.BLUE, Color.RED, Color.GREEN});
          cbColor.setActionCommand("color");
          JComboBox cbBG = new JComboBox(new Color[]{Color.BLUE, Color.RED, Color.GREEN});
          cbBG.setActionCommand("bg");
          add(cbFont);
          cbFont.addActionListener(this);
          add(cbSize);
          cbSize.addActionListener(this);
          add(cbColor);
          cbColor.addActionListener(this);
          add(cbBG);
          cbBG.addActionListener(this);
     public void setMessage(String m){
          message = m;
          repaint();
     protected void paintComponent(Graphics g){
          super.paintComponent(g);
          Graphics2D g2 = (Graphics2D)g;
          g2.setColor(bg);//set background color
          g2.fillRect(0,0, getWidth(), getHeight());
          g2.setColor(color);//set text color
          FontRenderContext frc = g2.getFontRenderContext();
          TextLayout tl = new TextLayout(message,font,frc);//set font and message
          AffineTransform at = new AffineTransform();
          at.setToTranslation(getWidth()/2-tl.getBounds().getWidth()/2,
                    getWidth()/2 + tl.getBounds().getHeight()/2);//set text at center of panel
          g2.fill(tl.getOutline(at));
     public void actionPerformed(ActionEvent e){
          JComboBox cb = (JComboBox)e.getSource();
          if (e.getActionCommand().equals("font")){
               font = new Font(cb.getSelectedItem().toString(), Font.PLAIN, size);
          }else if (e.getActionCommand().equals("size")){
               size = ((Integer)cb.getSelectedItem()).intValue();
          }else if (e.getActionCommand().equals("color")){
               color = (Color)cb.getSelectedItem();
          }else if (e.getActionCommand().equals("bg")){
               bg = (Color)cb.getSelectedItem();
          repaint();
}

How do I change fonts in a Text field ??

Okay I've tried to implement a JComboBox that allows the user to change fonts in the text field. So far I've tried different methods to do it but to no avail. Could somebodoy here read the programs source code for me and tell me where I went wrong?
/* * My GUI Client */
import javax.swing.*;
import javax.swing.text.*;
import java.awt.*;
import javax.swing.event.*;
//for HTML Headers
import javax.swing.text.StyledEditorKit.*;
import javax.swing.text.html.HTMLEditorKit.*;
import javax.swing.text.html.*;
import javax.swing.event.HyperlinkListener;
import javax.swing.event.HyperlinkEvent;
import javax.swing.event.HyperlinkEvent.EventType;
import javax.swing.text.html.HTMLFrameHyperlinkEvent;
//for layout managers
import java.awt.event.*;
//for action and window events
import java.io.*;
import java.net.*;
import java.awt.GraphicsEnvironment;
//for font settings
import java.lang.Integer;
import java.util.Vector;
import java.awt.font.*;
import java.awt.geom.*;
public class guiClient extends JFrame implements ActionListener {
protected static final String textFieldString = "JTextField";
protected static final String loadgraphicString = "LoadGraphic";
protected static final String connectString = "Connect";
static JEditorPane editorPane;
static JPanel layoutPanel = new JPanel(new BorderLayout());
static JPanel controlPanel = new JPanel(new BorderLayout());
static JPanel buttonPanel = new JPanel(new BorderLayout());
static JPanel fontPanel = new JPanel(new BorderLayout());
static PrintStream out;
static DrawPanel dPanel;
static DrawPanel dPButton;
static DrawPanel dFonts;
static DrawControls dControls;
static DrawButtons dButtons;
static String userString;
static String currentFont;
String fontchoice;
String fontlist;
static JTextField userName = new JTextField();
public static JMenuBar menuBar;
private static JButton connectbutton = new JButton("Connect");
static boolean CONNECTFLAG = false;
//create the gui interface
public guiClient() {
     super("My Client");
// Create a ComboBox
GraphicsEnvironment gEnv = GraphicsEnvironment.getLocalGraphicsEnvironment();
String envfonts[] = gEnv.getAvailableFontFamilyNames();
Vector vector = new Vector();
for ( int i = 1; i < envfonts.length; i++ ) {
vector.addElement(envfonts);
JComboBox fontlist = new JComboBox (envfonts);
     fontlist.setSelectedIndex(0);
     fontlist.setEditable(true);
     fontlist.addActionListener(this);
     fontchoice = envfonts[0];
//Create a regular text field.
     JTextField textField = new JTextField(10);
     textField.setActionCommand(textFieldString);
     textField.addActionListener(this);
//Create an editor pane.
editorPane = new JEditorPane();
     editorPane.setContentType("text");
     editorPane.setEditable(false);
//set up HTML editor kit
     HTMLDocument m_doc = new HTMLDocument();
     editorPane.setDocument(m_doc);
     HTMLEditorKit hkit = new HTMLEditorKit();
     editorPane.setEditorKit( hkit );
     editorPane.addHyperlinkListener( new HyperListener());
//Create whiteboard
dPanel = new DrawPanel();
dPButton = new DrawPanel();
dFonts = new DrawPanel();
dControls = new DrawControls(dPanel);
dButtons = new DrawButtons(dPButton);
     //JLable fontLab = new JLabel(fontLable);
//fontLab.setText("Fonts");
//Font newFont = getFont().deriveFont(1);
//fontLab.setFont(newFont);
//fontLab.setHorizontalAlignment(JLabel.CENTER);
JPanel whiteboard = new JPanel();
whiteboard.setLayout(new BorderLayout());
whiteboard.setPreferredSize(new Dimension(300,300));
whiteboard.add("Center",dPanel);
whiteboard.add("South",dControls);
whiteboard.add("North",dButtons);
     JScrollPane editorScrollPane = new JScrollPane(editorPane);
     editorScrollPane.setVerticalScrollBarPolicy( JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
     editorScrollPane.setPreferredSize(new Dimension(250, 145));
     editorScrollPane.setMinimumSize(new Dimension(50, 50));
//put everything in a panel
     JPanel contentPane = new JPanel();
     JPanel fontPane = new JPanel();
     contentPane.setLayout(new BoxLayout(contentPane, BoxLayout.Y_AXIS));
//add whiteboard
     contentPane.add(whiteboard);
//add editor box
     contentPane.add(editorScrollPane);
//add spacer
     contentPane.add(Box.createRigidArea(new Dimension(0,5)));
//add textfield
     contentPane.add(textField);
//set up layout pane
     //layoutPanel.add(GridLayout(2,1),fontLab);
     layoutPanel.add( BorderLayout.NORTH, fontlist);
     layoutPanel.add(BorderLayout.WEST,new Label("Name: ")); //add a label
     layoutPanel.add(BorderLayout.CENTER, userName ); //add textfield for user names
     layoutPanel.add(BorderLayout.SOUTH, connectbutton);//add dropdown box for fonts
     //fontPane.add(BorderLayout.NORTH,fontlist);
     contentPane.add(layoutPanel);
     contentPane.add(controlPanel);
     contentPane.add(buttonPanel);
//Create the menu bar.
menuBar = new JMenuBar();
setJMenuBar(menuBar);
//Build the first menu.
     JMenu menu = new JMenu("File");
     menu.setMnemonic(KeyEvent.VK_F);
     menuBar.add(menu);
//a group of JMenuItems
     JMenuItem menuItem = new JMenuItem("Load Graphic", KeyEvent.VK_L);
     menu.add(menuItem);
menuItem.setActionCommand(loadgraphicString);
     menuItem.addActionListener(this);
connectbutton.setActionCommand(connectString);
connectbutton.addActionListener(this);
     setContentPane(contentPane);
static private void insertTheHTML(JEditorPane editor, String html, int location) throws IOException {
     HTMLEditorKit kit = (HTMLEditorKit) editor.getEditorKit();
     Document doc = editor.getDocument();
     StringReader reader = new StringReader(html);
     try {
          kit.read(reader, doc, location);
     } catch (BadLocationException e) {}
//listen for actions being performed and process them
public void actionPerformed(ActionEvent e) {
//if the action is from the textfield (e.g. user hits enter)
     if (e.getActionCommand().equals(textFieldString)) {
          JTextField fromUser = (JTextField)e.getSource();
     if (fromUser != null){
//place user text in editor pane
//send message to server
               if (userName.getText() != null) {
                    userString = userName.getText().trim();
               out.println(userString + ": " + fromUser.getText());
          fromUser.setText("");
     } else if(e.getActionCommand().equals(connectString)) {
          CONNECTFLAG = true;
} else if (e.getActionCommand().equals(loadgraphicString) ) {
          final JFileChooser fc = new JFileChooser();
          int returnVal = fc.showOpenDialog(this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
               File file = fc.getSelectedFile();
               dPanel.loadImage(file.getAbsolutePath());
               sendImage(file);
     else if (e.getActionCommand().equals(fontlist)){
     JComboBox cb = (JComboBox)e.getSource();
String newSelection = (String)cb.getSelectedItem();
currentFont = newSelection;
     userString = currentFont;
return;
/*public void itemStateChanged (ItemEvent e) {
if ( e.getStateChange() != ItemEvent.SELECTED ) {
return;
if ( list == fontlist ) {
fontchoice = (String)fontlist.getSelectedItem();
     userString.changeFont(fontchoice);
//append text to the editor pane and put it at the bottom
public static void appendText(String text) {
     if (text.startsWith("ID ") ) {
          userString = text.substring(3);
     } else if (text.startsWith("DRAW ") ) {
          if (text.regionMatches(5,"LINE",0,4)) {
dPanel.processLine(text);
     }else if (text.regionMatches(5,"POINTS",0,5)) {
     dPanel.processPoint(text);
     } else if (text.startsWith("IMAGE ") ) {
int len = (new Integer( text.substring(6, text.indexOf(",")))).intValue();
//get x and y coordinates
     byte[] data = new byte[ (int)len ];
     int read = 0;
try {
     while (read < len) {
     data = text.getBytes( text.substring(0, len) );
} catch (Exception e) {}
     Image theImage = null;
     theImage = dPanel.getToolkit().createImage(data);
     dPanel.getToolkit().prepareImage(theImage, -1, -1, dPanel);
     while ((dPanel.getToolkit().checkImage(theImage, -1, -1, dPanel) & dPanel.ALLBITS) == 0) {}
          dPanel.drawPicture(0, 0, theImage);
} else {
//set current position in editorPane to the end
          editorPane.setCaretPosition(editorPane.getDocument().getLength());
//put text into the editorPane
          try {
               insertTheHTML(editorPane, text, editorPane.getDocument().getLength());
          } catch (IOException e) {}
} //end of appendText(String)
public void sendImage(File file) {
//find length of file
     long len = file.length();
//read file into byte array
     byte[] byteArray = new byte[(int)len];
     try {
          FileInputStream fstream = new FileInputStream(file);
          if (fstream.read(byteArray) < len) {
//error could not load file
          } else {
          out.println("IMAGE " + len + ",");
               out.write(byteArray, 0, (int)len); //write file to stream
     } catch(Exception e){}
//run the client
public static void main(String[] args) {
     String ipAddr=null, portNr=null;
          if (args.length != 2) {
               System.out.println("USAGE: java guiClient IP_Address port_number");
               System.exit(0);
          } else {
     ipAddr = args[0];
          portNr = args[1];
          JFrame frame = new guiClient();
          frame.addWindowListener(new WindowAdapter() {
               public void windowClosing(WindowEvent e) { System.exit(0); }
          frame.pack();
          frame.setVisible(true);
          while(CONNECTFLAG == false){}
//sames as previous client,
//set up connection and then listen for messages from the Server
          String socketIP = ipAddr;
          int port = Integer.parseInt(portNr);
//the IP address of the machine where the server is running
          Socket theSocket = null;
//communication line to the server
          out = null;
//for message sending
          BufferedReader in = null;
//for message receiving
          try {
          theSocket = new Socket(socketIP, port );
//try to connect
          out = new PrintStream(theSocket.getOutputStream());
               dPanel.out = out;
//for client to send messages
          in = new BufferedReader(new InputStreamReader(theSocket.getInputStream()));
               BufferedReader userIn = new BufferedReader(new InputStreamReader(System.in));
               String fromServer;
               while ((fromServer = in.readLine()) != null) {
               appendText(fromServer);
               if (fromServer.equals("BYE")) {
                    appendText("Connection Closed");
                    break;
          out.close();
//close all streams
          in.close();
          theSocket.close();
//close the socket
     } catch (UnknownHostException e) {
//if the socket cannot be openned
          System.err.println("Cannot find " + socketIP);
          System.exit(1);
          } catch (IOException e) { //if the socket cannot be read or written
          System.err.println("Could not make I/O connection with " + socketIP);
          System.exit(1);
class HyperListener implements HyperlinkListener {
public JEditorPane sourcePane;
public void hyperlinkUpdate(HyperlinkEvent e) {
if (e.getEventType() == HyperlinkEvent.EventType.ACTIVATED) {
sourcePane = (JEditorPane) e.getSource();
               if (e instanceof HTMLFrameHyperlinkEvent) {
HTMLFrameHyperlinkEvent event = (HTMLFrameHyperlinkEvent) e;
                    System.out.println(event.getTarget());
                    HTMLDocument doc = (HTMLDocument) sourcePane.getDocument();
                    doc.processHTMLFrameHyperlinkEvent(event);
else {
try {}
catch (Exception ev){
     ev.printStackTrace();
Well sorry the source code takes up the whole forum but I need a good feedback from this.

All right...
public class guiClient extends JFrame implements ActionListener {
static String userString;
static String currentFont;
String fontchoice;
String fontlist;
static JTextField userName = new JTextField();
public guiClient() {
     super("My Client");
public guiClient() {
     super("My Client");
// Create a ComboBox
GraphicsEnvironment gEnv = GraphicsEnvironment.getLocalGraphicsEnvironment();
String envfonts[] = gEnv.getAvailableFontFamilyNames();
Vector vector = new Vector();
for ( int i = 1; i < envfonts.length; i++ ) {
vector.addElement(envfonts);
JComboBox fontlist = new JComboBox (envfonts);
     fontlist.setSelectedIndex(0);
     fontlist.setEditable(true);
     fontlist.addActionListener(this);
     fontchoice = envfonts[0];
//Create a regular text field.
     JTextField textField = new JTextField(10);
     textField.setActionCommand(textFieldString);
     textField.addActionListener(this);
public void actionPerformed(ActionEvent e) {
//if the action is from the textfield (e.g. user hits enter)
     if (e.getActionCommand().equals(textFieldString)) {
          JTextField fromUser = (JTextField)e.getSource();
     if (fromUser != null){
//place user text in editor pane
//send message to server
               if (userName.getText() != null) {
                    userString = userName.getText().trim();
               out.println(userString + ": " + fromUser.getText());
          fromUser.setText("");
     else if (e.getActionCommand().equals(fontlist)){
     JComboBox cb = (JComboBox)e.getSource();
String newSelection = (String)cb.getSelectedItem();
currentFont = newSelection;
     userString = currentFont;
return;

Changing font in Oracle Report in PDF output

Hi,
I have created reports using dev10g(report builder). I can run report from client side in pdf format but I want to change the font (i.e from courier to Arial narrow).
How can I do this?
Is there anyone who can help me?
my unifont.ali file is:
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2004, Oracle. All rights reserved.
# $
# $Revision: tk2/admin/uifont.ali#0 $
# Copyright (c) 1994, 2004, Oracle. All rights reserved.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
"arial narrow" = "Arial Narrow"
Arial = helvetica
"Courier New" = courier
"Times New Roman" = times
Modern = helvetica
"MS Sans Serif" = helvetica
"MS Serif" = times
"Small Fonts" = helvetica
# Mapping from Macintosh
"New Century Schlbk" = "new century schoolbook"
"New York" = times
geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman = palatino
Script = "itc zapf chancery"
FixedSys = courier
System = helvetica
# Mapping from Macintosh
"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
fixed = courier
clean = times
lucidatypewriter = courier
lucidabright = times
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
Roman = palatino
Script = "itc zapf chancery"
FixedSys = courier
System = helvetica
# Mapping from Macintosh
"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
fixed = courier
clean = times
lucidatypewriter = courier
lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
"helvetica narrow" = "Arial Narrow"
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
"arial narrow" = "Arialn.ttf"
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
# Subsetting TrueType Collection fonts:
# Typically, a TTC font contains several fonts in one file. For example,
# the TTC file, msgothic.ttc consists of three fonts in the order -
# MS Gothic, MS PGothic and MS UI Gothic. To subset MS PGothic, the
# entry in the PDF:Subset section of uifont.ali would be:
# "MS PGothic" = "msgothic.ttc,1"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Subsetting entry. Entries
# in Font Subsetting will take precedence over the entries in Font Embedding
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
Thanks,
Rafikul

Welcome to OTN
Check the two link..
1. Re: Oracle Reports 10g Fonts issue
2. Re: Adding new font to my Reports Setup
Hope this will help you
Hamid
If someone's response is helpful or correct, please mark it accordingly.

How do you change fonts in an HTML report?

Hello all,
I need to create a report from a test that I've written, and my only feasible option is HTML. Unfortunately, I know next to nothing about HTML, so I'm using the LabView VI's to build the report.
In the attached VI, I've written a program that simply plops a couple lines of text down and saves it in the HTML format. The color, font style, font type all seem to work fine, and when I change them I see the changes reflected in the HTML document. The size, however, doesn't change.
What I need to do is have the ability to have different lines of text be different sizes, or even 1 word in a sentence be a different size.
How do I do this?
What am I doing wrong?
Any help would be greatly app
reciated!
Dave Neumann
[email protected]
Attachments:
htmltrial.vi ‏78 KB
111.html ‏1 KB

Dear Dave,
The setting of the size is working but your parameters are inadequate for a HTML document.
The reporting VIs are generating HTML which is decrepated. It generates a FONT tag with a size attribute with "30pt" and "10pt" as you have set in the Set Report Font parameters. The HTML standard allows only values of "1" to "7". The standard works with relative sizes so a "pt" does not apply to it. "1" is the smallest size and the actual displayed size depends on the setting of the browser. In MS IE you can set it under View>>Size to one of five degrees.
If you would use "5" and "7" instead of "10pt" and "30pt" you will see the text in different size.
Your values are coerced to 7. That's why you see something you didn't expected.
Unfortunatly
I have no experience with the reporting VIs. I'm not sure if they can use the style sheet formatting which will allow font sizes measured in points.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

How to change fonts in iCal?

How to change fonts in iCal? I can't harly read my calendar-tiny print size. How could I change the font size?

Your question really got me thinking. Actually, I don't think you should feel like an idiot at all. I think it is Apples failure that they made this difficult. Seriously, who would ever think to press Command and arrow to switch months? The little arrows next to the word Today are so small and inconspicuous that I remember having this very same question when I started using iCal too.
So, here is what I did to make it easier for my wife that uses iCal too.
Open System Preferences, Keyboard, Keyboard Shortcuts Tab, and finally Application Shortcuts.
Click on the Plus symbol under the right hand pane.
Select iCal from the Application list
Add two shortcuts: One named Next and the other named Previous and press your desired Keyboard Shortcut.
I assigned the left arrow and right arrow for these tasks.
Now it makes more sence for someone that is not used to Apples idotic way of doing things. ;-)
I use keyboard shortcuts all over the place. Actually, sometimes it gets me into trouble when I use someone elses computer and my shortcuts don't work. I blame their computer for it and forget it was my "tuning".

How to change font size on screen

how to change font size on screen

I'm not certain what font sizes you wish to change, when on a page you can use command and the += button to zoom in and make the fonts larger. On the finder desktop you can make what ever is on the desktop larger or smaller from the finder menu click view, custom view options, and adjust the icon size with the slider on the top, and the text using the text size box to select the size that your comfortable with.
Forgot to add these.
http://support.apple.com/kb/PH10876
http://support.apple.com/kb/PH10877
Hope this helps.

1.5.1 or MacPro changes font in all my books

Similar Messages

Maybe you are looking for