1.5.4 p 2: Filtering triggers with more than one criteria does not return

I just recently installed SQL Dev 1.5.4.59.40 updated to patch 2 using JDK 1.6.0_06.
I did not migrate settings from a prior version but rather applied them manually.
When applying a filter to the triggers node of a connection, a single filter works fine, or a multiline filter with a match criteria of all works fine, but when choosing Match Any with multiple (in my case 2) match criteria the filtered list of triggers fails to display in a reasonable amount of time.
The same filter criteria works relatively quickly in SQL Dev 1.5.1.54.40.
The connection in question has 2661 triggers that belong to it's schema.
I don't percieve any lack of performance on Schemas with smaller numbers of triggers (~20 triggers)
Also similar filter criteria work well on:
<li> Tables: 1300
<li> Packages: 41000
<li> Views: 27000
Edited by: Sentinel on Aug 12, 2009 10:53 AM

Just to be sure it's still an issue, can you try that on the latest 1.5.5?
K.

Similar Messages

Analog Source Triggering with more than one channel in channel list

Hello,
I am trying to use an analog reference trigger with a channel list that contains more than one entry using a
M Series 6289. I am aware that this is generally not possible to have more than one channel in the list due to hardware limitations. I was hoping if some sort of workaround exists.
I am using the NIDAQmx C API to control the card.
Using a second card that is syncronized via RTSI should
allow me to use an analog reference trigger to control multiple analog IO channels ... Right ???
Thanks for any advice!
Best regards
Peter

Hello Peter,
If you look at the NI-DAQmx Help, Analog Triggering Considerations for E Series, M Series, and S Series Devices section, it says that to pause multiple channels with an Analog trigger, you must wire that signal to APFI0 or APFI1. Therefore, it is possible to perform this operation.
If you are sharing the AI Sample Clock across RTSI, then you would be able to stop multiple AI channels across multiple devices with the one Analog Reference Trigger.
I hope this helps,
Sean C.

Smart Album with more than one criteria?

Can a single smart album have more then one criteria?
Every photo of my daughter in my library is tag with her name. I am trying to create a smart album using her name as the keyword that also rated 3 or more stars.
The steps I am taking are as follows:
1. Set the rating 3 stars or more. (instantly I see all photos in the library that are 3 or more stars)
2. Set keyword (my daughters name) with the condition, "include only the following" (the album still shows photos from step 1)
Any ideas?
Andre
Thanks,
Andre

Thank you, been trying to figure this out for hours and such a simple fix.
Thanks,
Andre

How to filter with more than one criteria

Hello,
I am trying to set a filter with two specific criteria. I am able to verify with one but not two. My syntax must be incorrect. Any suggestions?
EMPLOYEE_CD_DESC='Full-Time' and 'Part-Time'
Am I not allowesd to use the and?

I dont think that a criteria like
EMPLOYEE_CD_DESC='Full-Time' and 'Part-Time'can ever be true.
So, either use Bharath's suggestion of IN Clause or
EMPLOYEE_CD_DESC ='Full-Time' OR EMPLOYEE_CD_DESC = 'Part-Time'

Is it possible to Face Time with more than one person?

All of my grandchildren posess iiPads, and I regularly Face Time with them---individually. Is it possible to Face Time with more than one person?

Not at present-no.

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Can I use a magic trackpad with more than one Mac at a time?

I am attempting to pair a MTP with a second MacBook Pro. So far I can't get system preferences to find the MTP.
I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac. To do this, you first remove the existing pairing and then pair the trackpad again'.
Can anyone advise, please?
If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
Thanks

Yes, your keyboard, mouse or trackpad can be paired with multiple Macs. You can even have multiple keyboards, mice or trackpads paired with one Mac. The caveat is that the device can only be connected to one Mac at a time. The device can't be paired or connected with a Mac while it's currently connected to another.
Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other. The device will connect with the first available paired Mac and then unavailable to the second. If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on. I do this with a keyboard from my iMac to a Mac Mini in another room.
Captfred

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

Send email from SAP with more than one attachment

Hi all,
How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
Besr regards,
Munur

Hi,
I use :
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
the main problem with different attachemts is to genereate the packing_list.
the packing list is a kind of description of the data table... where ist the start of an image, end, size...
"Creation of the entry for the compressed attachment
        objpack-transf_bin = 'X'.                    " it could be an image
        objpack-head_num = lv_head_num_count . " inital 1 each att add 1
        objpack-head_start = 1.                     " fix
        objpack-body_start = gv_startnum.    " table with attachments 1. line one
        objpack-body_num = tab_lines.          " how many lines are in the table of attachment
        objpack-doc_size = tab_lines * 255.   " size of the attachment...
       objpack-doc_type = lv_typ . " 'JPG'.
        objpack-obj_name = 'ATTACHMENT'.
        objpack-obj_descr = lv_stripped_name " name of the JPG
   APPEND objpack.
   APPEND LINES OF lt_goscontent TO gt_maildata. " data Table...
bestreg
robert

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

A Cloud subscription provides for installing working installations on two machines. You can have mixed operating systems (both Windows and Apple's OX).

When I import a cd with more than one artist iTunes separates each individual artist - how do I get it to show the album as a whole rather than individual artist?

When I import a cd with more than one artist itunes shows each artist's song separately and won't group the album as a whole - this is incredibly frustrating something that Windows media player doesn't do. Does anyone have a simple cure for this annoyance?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

Can you sign in with more than one apple id on an iPad?

Can you sign in with more than one apple id on an iPad?

Only one account can be signed in at a time (via Settings > Store), and if you turn on automatic downloads and/or download past purchases from an account then you risk tying the iPad to that account for 90 days : http://support.apple.com/kb/HT4627

Why is all my icloud account linked with more than one apple id?

why is my iphone 5 merged with more than one account?

What do you mean by "merged with more than one account" and "linked with more than one Apple ID"? What exactly are you seeing on your phone?

HT1040 Is there a way to place an order with more than one item at a time? For example I am going to make a few books and have them all shipped to me. Do I have to order and pay shipping for each one individually?

Is there a way to place an order with more than one item at a time? for example I am making a few books and having them all shipped to me. Do I have to order each one separately and pay shipping each time?

You have to order each book separately, if the books are different. Only multiple copies of the same book can be ordered in the same order, see here
Regards
Léonie

How can i use Itunes to update more than one IPad with more than one owner

How can i use Itunes to update more than one IPad with more than one owner? I own an IPad and my wife owns an IPad. I want to use my system to update both IPads. We have different Apple Accounts and different applications. Is this possible?

Of course, that is too easy. I am such a bonehead.

1.5.4 p 2: Filtering triggers with more than one criteria does not return

Similar Messages

Maybe you are looking for