1.5 plugin installer cannot continue because files unavailable

My applet wants to use any 1.5 plugin with
codebase = "http://java.sun.com/update/1.5.0/jinstall-1_5-windows-i586.cab#Version=1,5,0,0" .
But after downloaded the 1.5 plugin successfully and install begins, I get this popup error (that I cannot cut and paste, so anonyingly I'll type in manually):
Error - Java(TM) Installer
"This installer cannot continue because the files necessary for installation are unavailable. If trying to install a beta or older version, please check http://java.sun.com/j2se to deterimine if it is still supported. If so, please try installing at a later time, as these files might be only temporarily unavailable."
I tried to to this plugin install over several days, as of Feb 20, 2005, it is still error popup and NO GO. So my applet is unusable for people who have no 1.5 plugin.
By the way, this installer worked a week ago.
Anyone has similar problem?

Thank you. You are right. The error was actually produced by j2EE 5.0's htmlConverter.exe that
errorneously produced "1.5.0/jinstall-1_5-windows-i586.cab"
instead of "1.5.0/jinstall-1_5_0-windows-i586.cab".

Similar Messages

During deployment :windows installation cannot continue because a required driver could not be installed

During a deployment from wds i get the following error with windows 8.1 "windows installation cannot continue because
a required driver could not be installed".
Hardware : Gigabyte GA-Q77M-D2H.
I got image from installation Disc.
When the error occors this is the event in the admin-log on server 2008R2
The following WDS Client has encountered Fatal Error:
SessionGuid: {01208fe1-bb0c-49d6-9e32-0000da4897af}
MAC: 000C29D627F6
IP: 192.168.208.86
ClientGuid: {2f904d56-a52b-3220-a351-79ecd5d627f6}
Arch: 9
ErrorMessage: Windows installation cannot continue because a required driver could not be installed.
What to do?
Thank you in advance.

Hi,
The problem is a unsuccesful installation of driver in the driverstore, the first step would be to ensure that you are using the latest driver for the hardware and operating system or you’re experiencing
compatibility issues with a driver.
Then I suggest pressing shift+f10, and type diskpart then lisk disk, view whether all disks work fine.
Regards,
Yolanda
Yolanda
TechNet Community Support

Windows 8.1 WDS Installation cannot continue because a required driver could not be installed.

When i try to deploy a custom Windows 8.1 Pro Image Via WDS I get the above error. I have enabled Client side logging and checked WDS logs and install logs on the failed installation (Shift+F10). I don't think the issue is a matter of the drivers that are
included in the boot image. If it were a network card issue i would not be able to get the WINPE on the network and start the install. Second i don't think its a storage driver issue, WINPE has formatted the Drive as one may see in (Shift F10) DISKPART.
If it were a storage driver, it would not see the drive and would not format. I am starting to thing that this may be a Windows 8/8.1 Kernel issue that i have found referenced in other forums.
That Said, I still injected my drivers into WDS then into my boot image, i was unable to do some drivers that were unsigned in WDS so i added them in DISM directly to the images. I forced the unsigned drivers so they could be added. I injected the drivers into
my install and boot image. and still nothing. I then went back and removed, via DISM, all third party drivers from my boot and install image and it's still giving me the error. Help!!!!!!!!!!!!!
I can upload logs if needed.

Hi wkingswt,
In addition, please confirm image file source, prevent capturing yourself or got from faulty image or installation media.
please make sure using right version Windows PE, extract Windows PE from Windows 8.1 installation media.
Check following precautions
First Signed device drivers are a key security feature in Windows. Drivers that are installed on x64-based computers must have a digital signature. If you're adding multiple drivers, you should create separate folders for each driver or driver category.
This makes sure that there are no conflicts when you add drivers that have the same file name.
Also, as a workarround Adding Device Drivers to an Offline Windows Image also is an option.
You could find setup logs from the client computer by referring to following article, and see which driver failed to install.
http://support.microsoft.com/kb/936625/en-us
Regards

I can't update my itunes and it shows me this message: The installer has insufficient privileges to access this directory: C:/program files/itunes. The installation cannot continue. Log on as administrator or contact your system administrator

i can't update my itunes and it shows me this message: The installer has insufficient privileges to access this directory: C:/program files/itunes. The installation cannot continue. Log on as administrator or contact your system administrator

Hello PamelaFox14,
Thank you for using Apple Support Communities.
It sounds like you need to log in as the administrator to update the iTunes application properly.
Take a look at this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
This section in particular:
1. Make sure you have administrator account access
To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
Windows 7: How do I log on as an administrator?
Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
All the best,
Sterling

Trying to download ITunes latest version on my Windows XP and I get this message "The installer has insufficient privileges to access this directory: C:\Program Files\ITunes. The installation cannot continue. HELP!!

Trying to download ITunes latest version on my Windows XP and I get this message: "The installer has insufficient privileges to access this directory: C:\Program Files\ITunes. The installation cannot continue. Log on as administrator or contact your system administrator." HELP?

Hello PamelaFox14,
Thank you for using Apple Support Communities.
It sounds like you need to log in as the administrator to update the iTunes application properly.
Take a look at this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
This section in particular:
1. Make sure you have administrator account access
To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
Windows 7: How do I log on as an administrator?
Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
All the best,
Sterling

INS0003 OWB Repository Installation cannot continue without DBA privileges

Hi:
I´ve installed oracle database 10120 and today installed oracle warehouse builder 10.1, the installation haven´t problems, but when i try to execute OWB Repository Assistant i have the follow message error:
INS0003 OWB Repository Installation cannot continue without DBA privileges
If i connect me to OEM and check the privileges for sys or system user don't have any problem if i connect me as sysdba.
I created a new user with all privileges and the error is the same.
How could i fix my problem?
Thanks for your help.
Alex.

This issue is normally caused because you have not setup sys to connect as sysdba per newer database setup procedures, test with connect "/ as sysdba" in sql*plus.
If you cannot connect from SQLPlus by just the '/ as sysdba' login, then check the Note 50507.1 via Metalink as this describes the different ways you can connect to Oracle as an
administrative user.
Hope this helps,
Keith
Product Management
Oracle Warehouse Builder

Adobe PDF creation cannot continue because Acrobat not activated

Adobe CS3, Acrobat Professional 8.1.0, Windows XP Pro: CS3 has been working faultlessly for several years. Suddenly, when I try to print using Adobe PDF as printer I get message "Adobe PDF creation cannot continue because Acrobat not activated". To my knowledge all of CS 3 should be activated. InDesign, Photoshop, Bridge, Illustrator, etc work fine. I can even open Acrobat 8 and call up documents but I cannot print to it. When I click on "Activation" in Help menu, both "Activate" and "Deactivate" are grayed out. Any suggestions?

Perhaps you should use this tool:
<http://www.adobe.com/support/contact/licensing.html>
The tool repairs the license but before using this tool, have you tried re-booting the system just in case this is a temporary problem? Also, it is a good idea to create a temporary profile and try using the PDF printer to see if it is working.
If it is working in your temporary profile, then this suggests that your preference file might need to be re-created but this is for next time after you have tried using the pdf in your test profile.
G/L

Protection Error - This application cannot continue because another application with an identical serial number is already running on another computer on your network

I attempted to open Final Cut Express this morning and got the message, "Protection Error - This application cannot continue because another application with an identical serial number is already running on another computer on your network".
I have no other FCE on any computers...this is the only mac running (iMac 2008 model). I used a preference manager app and deleted preferences...didn't work. I uninstalled and reinstalled FCE...didn't work.
This is the first time I have used FCE since installing the Yosemite OS, so I'm thinking perhaps that has something to do with it.
Any ideas?

There have been recent posts appearing about your problem. I'm not sure if anyone has found a solution.
FCE was abandoned by Apple years ago, and they are currently making Operating Systems without regard to how it impacts FCE.
countrynewsman wrote:
I uninstalled and reinstalled FCE...didn't work.
That is what I would try - a fresh install - but your need to use FCS remover (from the same software source as Preference Manager) to make sure you get all traces of your existing installation off the drive prior to doing the installation:
http://www.digitalrebellion.com/fcsremover/
If you use FCS Remover, and reinstall the other problem may be that Apple has apparently removed the Software Upgrade to FCE 4.0.3.
So unless you have a 4.0.3 install disk, or you hadn't upgraded past the version number of the install disk you do have, you legacy projects may be tagged as being created with a later version than you have and not open.
Hope it works out for you.
MtD

Unable to find disk 2. Installation cannot continue.

RDBMS Version: 9.2.0
Operating System and Version: Red Hat Linux release 9 (Shrike)
Unable to find disk 2. Installation cannot continue.
Hello, I have been trying to install Oracle 9i Release 2 into a Red Hat Linux release 9 (Shrike) machine with no success. The installer hangs with "Unable to find disk 2. Installation cannot continue." even if it is configured in the .rsp file the parameters that specify the path to the other disks.
In some posts I found here (in metalink) there were references to 2 different variable names: FROM_LOCATION_DISK2 or LOCATION_FOR_DISK2 and FROM_LOCATION_DISK3 or LOCATION_FOR_DISK3. Both were set. Parameter FROM_LOCATION_CD_LABEL were also set with value "orcl920" (from the disk.label) and the names of the directories where the install disks where extracted have names like Disk1, Disk2 and Disk3. (I saw in the documentation that if the parameters of the other disks, 2 and 3, were not set in the response file, the installer would look for directories named Disk2 and Disk3 in directories 2 or 3 levels above products.jar, which is located in a subdirectory of Disk1).
I know this is not a certified combination of OS+DB but itÂ´s just a test DB and wonÂ´t be put in production and even this config wonÂ´t be put in production in any site but itÂ´s strange that a certification problem could raise an error in this level (what I would expect are linking and dependencies errors and not the impossibility of finding the install disks that are in the same file system and even specified by the parameters).
Is there another way to specify the location of these disks? Through a comand line parameter of the installer, for example, an enviroment variable or even other parameters in different files....
Thanks in advance.
Mauricio.

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

I was able to print with my acrobat before, but I can no longer do it. the error message says "adobe creation cannot continue because acrobat is not activated" How do I activate it?

i was able to print with my acrobat before, but I can no longer do it. the error message says "adobe creation cannot continue because acrobat is not activated" How do I activate it?

I have the exact same issue. I can print one document and then I get the error mentionned above ("adobe creation cannot continue because acrobat is not activated"). Then I need to reboot in order to be able to print a new document.
I have suite and went to Photoshop as suggested, but this program is already activated. I tried to launch Acrobat Pro but it won't.
I'm using the Design and Web Premium CS6 Suite on Windows Vista.
Thank you so much for your help.

Iphoto - trying to update iphoto to current ver. i get a message that says it cannot update because "file is not in orginal location"

Hi,
Ive moved my iphoto library to an external drive and it seems to be working fine launches from the external drive etc,
I then updated iphoto to iphoto 11 and then attempted to update to the current version either 9.3 or 9.4 i dont recall - whatever the updated version is.
I get a message that tells me that it cannot update because "file is not in original location"
Im not sure which file or which location is being referred to here.
im sure ive done something but cant seem to recall what that might have been...
im a little puzzled though since it still launches etc.
any help would be appreciated. (2007 imac)
thx

"file is not in original location"
Is that the exact error message? When do you get this error? will your iPhoto library work properly withou the update?
LN

Internal Server failure, NSAI Plugin. Cannot Continue

Friends,
I am posting this message hoping for a solution.
We have web application running on Iplanet 6.1 -> weblogic 9.2. The initial request hits the iplanet webserver and then the request is redirected to weblogic 9.2 server with the wlproxy plugin configured on iplanet webserver.
Our system architecture is simple, we don't have any cluster configurations on it.
User gets following error message sporadically, Interesting fact of this issue is that, part of the webpage gets this message (Message from NSAPI plugin) and while on refresh the browser error message doesnt show up:
Message from NSAPI plugin:
Internal Server failure, NSAI Plugin. Cannot Continue. Change Number: 755164.
Please help me with solution/debuging strategies if any for the same.
Thanks in Advance.
-DhilliP

looks like, some issue with 3rd party nsapi plugin. u might want to post this question to web logic plugin forum as well as looks like they possibly have some issues with their plugin.
If u r needs are simple, then can u not use the reverse proxy plugin provided by sun and forward the requests to weblogic.
http://docs.sun.com/app/docs/doc/819-6510/6n8h5jos2?a=view
here is the link on how to get this plugin
http://www.sun.com/download/products.xml?id=3f567f91

Photoshop cc: installation cannot continue until Bridge is closed.

cannot install photoshop cc. erroe message says bridge needs to close. bridge is not open

Bridge is running in the background. You're just not aware of it.
It starts at login when you have Edit > Preferences > Advanced, Start Bridge at Login checked.
Close bridge.exe via the Task Manager.
See http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html

I tried to reinstall itunes, in the middle of the installing process i get the message "The installer has insufficient priviliges to access this directory:C\ProgramFiles [x86]\iTunes. Installation cannot continue.Log on as Administrator or contact your sy

I tried to reinstall Itunes so i can have my computer interact with my iPod Classic.I uninstalled all the previous programs per apple's instructions.Part way during the reinstallation an error message comes up: The installer has insufficient priviliges to access this directory: C\ProgramFiles[x86]\iTunes.
Installer cannot continue.Log on as administrator or contact your system administrator.
I am the administrator on this HP computer.

Hello PamelaFox14,
Thank you for using Apple Support Communities.
It sounds like you need to log in as the administrator to update the iTunes application properly.
Take a look at this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
This section in particular:
1. Make sure you have administrator account access
To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
Windows 7: How do I log on as an administrator?
Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
All the best,
Sterling

The installation cannot proceed, because some of the processes are running. The Installation failed

When attempting to install Acrobat 11 Professional the following came up The installation cannot proceed, because some of the processes are running.
The Installation failed
The installer encountered an error that caused the installation to fail.
Contact the software manufacturer for assistance.

If the processes are listed, turn them off before intiating the installation. Usually these processes are something running in the background, and can include virus protection. Here are some links that can help close the background programs:
Closing Programs Interfering with Installation
PC - Task Manager: (CTRL-ALT-Delete)
http://support.microsoft.com/kb/323527
Mac - Activity Monitor:
http://osxdaily.com/2010/08/15/mac-task-manager/

1.5 plugin installer cannot continue because files unavailable

Similar Messages

Maybe you are looking for