1.5 TB Seagate drive will not work with Airport Extreme.

I have a 1.5 TB external drive connected to airport extreme.  I cannot get this drive to be recognizedby the computers connected to the Airport Extreme.  The drive show up as "-1.4 TB - Seagate FreeAgent 0138"  under disks in Airport Utility can plug it in directly to my Mac Air and a PC and the drive will work. When I plug the drive in directly to a PC or Mac Air,  it is recognized and can be used. 
I can plug in a 250 GB external drive into the Airport extreme and they will work.
Also,  the 1.5 TB works when plugged locally to a PC or Mac using USB. 
Anyone know how to get it to work with the Airport Extreme?

Assuming that the drive has been formatted in Mac OS Extended (Journaled) or MS-DOS FAT32, you almost always need to use a powered hub with a drive attached to the USB port on the AirPort Extreme...even if the drive has its own power supply.....because the USB port is under powered and will not supply enough current to most hard drives.

Similar Messages

  • Pc will not work with Airport Extreme LAN connection

    I have setup my Aiport Extreme Base Station and my Mac and phone work just fine with the setup. However, I connected a PC directly to one of the LAN ports on the back, and the PC doesn't see the network. Above the port the light is blinking green. Any thoughts? 

    Is the AirPort Extreme Base Station (AEBS) the only router in your current network configuration? That is, it is connected directly by Ethernet to your Broadband Internet modem? ... or to another router between the AEBS and the modem?
    When connected by Ethernet to the AEBS, can the PC "see" the Mac or vice-versa?

  • Time Machine will NOT work with Airport Disks!

    It looks like Time Machine will not work with Airport Disks after all. All references to Airport have been removed from the Time Machine page:
    http://www.apple.com/macosx/features/timemachine.html
    It also specifically says: "You can designate just about any HFS+ formatted FireWire or USB drive connected to a Mac as a Time Machine backup drive. Time Machine can also back up to another Mac running Leopard with Personal File Sharing, Leopard Server, or Xsan storage devices."
    Surely, they would have included the Airport Extreme Base Station in this list if it was supported.
    I really hope there will be another firmware update for the AEBS which will bring compatibility with Time Machine, because Time Machine was the only reason for me to buy an AEBS. (I only use it as a small backup server, I don't even have wireless networking enabled. There were other solutions, e.g. from Synology, which are faster and more reliable than AEBS disk sharing, but Synology stated their network drives would not be compatible with Time Machine.)

    Here's how you can potentially use your AirDisk with TimeMachine (beware that YMMV), but it should work as it works with every other "unsupported" device.
    1) Mount your AirDisk so it appears on your Mac
    2) Open Terminal.app
    3) change directories to the AirDisk's root folder located in "/Volumes"
    ie: cd "/Volumes/AirDisk Name"
    4) execute this command to "bless" the drive to be used with time machine:
    touch .com.apple.timemachine.supported
    5) Start TimeMachine and if all went well, it should recognize your AirDisk drive and use it for TM.
    This should also work on NFS shares, SMB shares, AFP shares, basically anything. It has worked up until the last developer seed, so unless they yanked this at the last minute, it should still work.
    Now, the reason why Apple removed this feature may be due to the unreliability of the AirDisk, so be cautious.

  • PC Internet Not Working with Airport Extreme

    Hey guys, just got a new Airport Extreme to replace my old one. Me and my brother's MacBook's both work in terms of the internet, but my dad's PC's internet will not work. It is connected to the Airport, but has no internet access. Any ideas? Thanks.

    Apple's support section (http://docs.info.apple.com/article.html?artnum=306256) says "How to enable Cisco VPN connections
    You should use Cisco's VPN client software to establish a Cisco VPN connection via an AirPort Extreme base station. Note: In the Cisco VPN client preferences, make sure the "NAT-T" option is enabled.
    Note: Some corporate firewall configurations may cause issues with the Cisco VPN software.
    Please contact AppleCare support if you are unable to contact a Cisco VPN server via Cisco VPN client software and an AirPort Extreme base station.
    I'm experiencing the same thing. DellLatitude D610. Netgear rangemax wireless PC card (WPN511). I can connect to the internet but I try to vpn into work I get half way through the connection process and get an error which states" Secure VPN Connection terminated locally by the Client. Reason 412: The remote peer is no longer responding. I've spent 2 hours trying different settings. I really want to stick w/the apple product but will have to return it if I can't get it to work. I need cisco vpn via wintel for work.

  • Powerbook will not startup with airport extreme card installed

    I have a 2 year old powerbook using 10.3.9 an djust of late when my airport card is in, The computer just sends me to the open Firmware right after i turn it on.when i type mac-boot it comes up with a broken folder icon. however when i take my card out i dont have a problem. is there a wa i can ues my computer and the airport at the same time? what do you think i should do.

    it is a 867 mhz g4 with 256 mb ddr ram. 40 gb hd and
    a combo drive. i hope that is helpfull.
    This PowerBook requires the original Airport card, you can not use the Airport Extreme card in that PowerBook, any attempt to do so could result in damage to both the card and the PowerBook.
    Either change the AE card for an original Airport or use a third party 802.11g card in the cardbus slot.
    iFelix

  • Mac filter not working with Airport Extreme

    I setup my new AEBS and for whatever reason when I setup the Mac filter it still will let the desired user in with the key. I have both the wireless N and the wireless G (guests) setup and it doesn't seem to work with the G for sure, unfortunately I don't have any other wireless N capable units so I don't know if it works with N. I would assume that it would block all other Mac addresses if I select "No Access." Please help, and no I do not have any extensions of it, it's just the Extreme as the single wireless access point in our house with WPA security. Thanks!

    I had the same problem. On the MAC access panel in Airport Utility, click on the default user and then use the drop down menu below and click no access. Any of the added IDs you have added you can still put 24 hour access and only those users can connect to the network.
    The default is set for all access, so unless you change this, no matter how many separate IDs you add, it will let anyone on if they have a password.
    I didn't figure this out for years, but now it works the way I thought it was working all along...

  • Airport card does not work with Airport Extreme when security is turned on

    I have an iMac running OSX 10.4.11 with an Airport card installed (firmware version 9.52).
    I recently replaced my Netgear wireless router with an Apple Extreme Base station and now I am not able to connect my iMac to the wireless network when WEP security is turned on - I get an error from the Airport Setup Assistant when I attempt to connect to the wireless network.
    It works fine if the wireless security on the Extreme Base station is turned off.
    Please help and thanks in advance.
    Motasim

    First, I highly recommend that you switch to either WPA or WPA2 as WEP is no longer considered secure. If you must use WEP, I suggest that you try the following:
    o Re-create the Network Name (SSID) on your AirPort Extreme Base Station (AEBS)
    o Try using 128-bit WEP, with a 26-Hex character key for the encryption type.

  • Linksys gaming adapter not working with Airport Extreme

    Hey guys, just installed Airport Extreme 802.11n for my new MBP notebook and I have 3 laptops Apple and PC that work great! BUT! I have an Xbox with Linksys gaming adapter and the gaming adapter is not picking up the airport at all! Before the Airport I had a Linksys wireless router and it has worked with the gaming adapter for the last 3 years flawlessly. Does anybody know why the gaming adapter is not finding it?

    Hey guys, just installed Airport Extreme 802.11n for my new MBP notebook and I have 3 laptops Apple and PC that work great! BUT! I have an Xbox with Linksys gaming adapter and the gaming adapter is not picking up the airport at all! Before the Airport I had a Linksys wireless router and it has worked with the gaming adapter for the last 3 years flawlessly. Does anybody know why the gaming adapter is not finding it?

  • My Hybrid 1TB Seagate Hard Drive will not work in my data doubler caddy installed in the optical bay

    My Hybrid 1TB Seagate Hard Drive will not work in my data doubler caddy installed in the optical bay of my MacBook Pro

    Thanks for all the advice. It looks like I have finally got my MBP working again (after two weeks of pain).
    The WD HD works fine internally, but restoring from TM introduced a whole load more of issues/incompatabilities (see above). Eventually the only thing left was to re-build rather than restore:
    i) mount the WD disk internally and install Snow Lepoard from the orginial installation disks
    ii) get online, and after much trying download Lion (previously purchased). Perfrom all update.
    iii) Connect my Time Capsule, identify my data, photo and music files and then copy them accross by hand
    iv) install all the other applications (e.g. MS Office:mac, etc) from scratch.
    This exercise has shown me that even though tools and procedures exist to address separate issues, when the complexity of inter-dependence is introduced there are a raft of problems that crop up.
    Now I am back in business I will be using TM and CCC to take full and regular copies. I did this previously, which has saved me from losing my data and cherished pictures, but hopefully next time (and I'm sure there will be a next time) the recovery will be less infuriating.
    BTW I got a refund on the Seagate Momentus XT. They guy in the shop said it wasn't the first time he'd heard of this issue with MBPs. Great.

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • My GoFlexPro for Mac external drive will not work and freeze Finder after I switched to Mountain Lion. Anyone same trouble?

    My GoFlexPro for Mac external drive will not work and freezes Finder after I switched to Mountain Lion. Anyone same trouble?

    Search this site for many reports of problems with GoFlex drives.

  • ICloud Drive will not work on my iPad 3. Pages crashes when I try. Setting resets to off after it crashes. any suggestions?

    iCloud Drive will not work on my iPad 3. Pages crashes when I try. Settings resets to off after it crashes. any suggestions?

    From the Ipad manual - actually the same in Ipad, Ipod, Iphone --- the support site listed has frequently asked questions on Icloud drive.
    Set up iCloud Drive
    You can set up iCloud Drive using Setup Assistant when you install iOS 8, or you can set it up later in Settings. iCloud Drive is an upgrade to Documents & Data. When you upgrade to iCloud Drive, your documents are copied to iCloud Drive and become available on your devices using iCloud Drive. You won’t be able to access the documents stored in iCloud Drive on your other devices until they are also upgraded to iOS 8 or OS X Yosemite. For more information about upgrading to iCloud Drive, see support.apple.com/kb/HT6345.
    Set up iCloud Drive. Go to Settings > iCloud > iCloud Drive, turn on iCloud Drive, then follow the onscreen instructions.

  • Updated my HP Laptop to Windows 8 and now DVD driver will not work. Help!

    I have a Hp Pavilion dv-7013cl Entertainment PC and everything was working perfectly. I updated to Windows 8 about a month ago and had some problems. I then did a clean install of Windows 8 and now all the bugs are fixed except my DVD drive will not work. 
    I insert a DVD or CD and nothing happens. I go to My Computer and click on it and it just ejects the DVD. I don't know what to do and need my DVD drive.
    Also, I tried to go to device manager and reinstall the driver but that didn't help. 

    Hi Crosby,
    Take a look at this document and try the troubleshooting steps.  Please let me know if it helps to resolve your issues.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Have Thundbolt on my mac will not work with my thunderbolt drive

    I have a port on my Imac, but it will not work with my ThunderBolt Drive

    Agree on cables, you don't want something generic when it comes to thunderbolt in my experience. It's thos accessories that add up and they are profitable for a reason. Cheap isn't always good with accessories.

  • I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

    I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
    Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

    1
    Close all iWork applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    Reinstall Keynote by logging into the Mac App Store using download / install

Maybe you are looking for

  • Report not working from forms.

    Hi we are beginners and please help us.we have installed in LAN database 11g on vista and application server 10g on os 2003. we are developing some applications from our developer pc in vista and using developer suite 10g. we want to generate some re

  • Not able to install Statspack.

    DB 9.2.0.5.0 OS WIn 2003 server I've gone through the following procedure to generate a statspack report. but, I am not able to insatall statspack, though the same procedure worked in 10g. 1. create a perfstat tablespace 2. run spcreate.sql SPCUSR co

  • Peformance of setting JVM attribute or callback.

    I have a program that receives feeds in the native world and then calls the JVM through JNI with a callback like receivedFeed(attr1, attr2 ....attr20). There are a large number of attributes being passed back for each callback. The question I have ha

  • How much is it to get my 3g ipod charging piece fixed?

    The charging piece on my ipod broke when I used a portable charger & then proceeded to fall out. What would be the best solution having a small budget?

  • What upgrades do i need to do some gaming on my laptop

    I want to do some gaming  on my hp 2000 notebook but it lags . What should i upgrade and add to?