1.57GB of "Other"??? Huh??

My iPhone all of a sudden now says that I have 1.57 GB of "Other" I noticed this the other day. I was adding a video to my iPhone, and when I tried to access the videos, I noticed that all of my other videos were gone. As were all of my ringtones. Howver, the photos remained.
The next time I plugged it in, I noticed that there was a total of 1.57GB for the "Other" section.
There is no way that I can have all of this for Other. Do you think that those videos somehow got categorized as OTHER? Or is this something else? I really want to fix this.
Any suggestions?
Thanks!

Ansuz82 wrote:
Bonnna wrote:
If I reset it what EXACTly will I lose
Everything. All contacts/calendars/music/videos/pics/settings. Everything. Unless its backed up.
and how should I back things up?
The iPhone will back up everything but contacts/calendars and music/videos automatically. Contacts/calendars will be stored in your PIM and music/videos will have to be reloaded.
If you're on iTunes 7.5 or later you won't lose contacts/notes/or calendars or pics taken with the iphone. They are saved in the backup file that iTunes creates whenever you sync. I don't know why everyone says these are not backed up. I have restored several times and never backup my contacts or notes or whatever else, because it all gets restored, except music.

Similar Messages

HT4250 Does anyone know where to get a copy of the OS X 10.6.5 update? Apples' site says it can't find the page and the only other downloads i've found on the net say you need to have 10.6.5 to install 10.6.5. HUH?

Does anyone know where to get a copy of the OS X 10.6.5 update? Apples' site says it can't find the page and the only other downloads i've found on the net say you need to have 10.6.5 to install 10.6.5. HUH?

It's right here from Apple, at least for me.
Combo http://support.apple.com/kb/DL1324
Delta http://support.apple.com/kb/DL1325
Any reason you want the 10.6.5? You do know that the latest and final is the 10.6.8.

Where Is the Airplay Icon (for audio) on my iPhone 4? - And Other Issues

For the most part I'm pretty pleased with iOSv4.2 for both my iPads and iPhones. Folders, multitasking, all great improvements. But perhaps the most exciting new feature is "Airplay" from my iPad and, I wish, from my iPhone as well. To bad it's gimpy...
Never mind the fact that Airplay doesn't work with my original AppleTV - I think that's a raw deal, but hey, that's the way Apple rolls us into its version of the future. So ATV2 is already ordered and en-route.
I'll get to video and photos eventually, but for now I'm mostly concerned about sending music wirelessly from my iGizmos to speaker systems around the house. I have two Airport Express units, and those show up in Airplay on my iPad, so I know the system is working.
So here are the issues I'm having with Airplay:
1) I'm posting here because my biggest issue is that I do not see Airplay on my iPhone 4 updated to iOSv4.2. Even when using the iPod app on the iPhone, when I swipe to the controls in multitasking mode, there is no Airplay icon. It seems to me I should be able to send audio - either stored or streaming - from my iPhone to my Airports (as I can with my iPad), but I cannot. BTW, I DID see the Airplay icon briefly yesterday - when I had a bluetooth stereo headset activated, the Airplay icon appeared and gave me the choice of the headset or the iPhone. But I never did see an option to connect with my Airports.
2) When using Airplay from the iPad, I was only permitted to select ONE Airport device at a time. Huh? With Airplay in iTunes on my desktop, I have the option of sending the signal to as many devices as I want at one time. Is there some reason I cannot do that with my iOSv4.2? Seems to me they should operate in the same manner, why the oversight? Eventually I will need to connect multiple sound systems to one source.
3) As others have reported in this space, I am experiencing intermittent signal when listening to audio from my v4.2 enable iPad. It gets pretty annoying. I will continue to monitor these threads and see if I can get to the crux of the issue.
I recall reading that the release v4.2 was delayed somewhat in part because of "WiFi issues," and it would appear to me that those issues were not entirely resolved prior to the actual release. I'm glad they went ahead and released it, because the other features I've alluded to are a big improvement, but now that they've tempted me with these new possibilities, I expect it all to work well.
Are we taking bets on the release of iOSv4.2.2 ?
Thanks,
--PS

Mini Man, I'm glad to read you found a solution to your issue, but I don't know if your solution is going to be mine as well.
For starters, I do not have the new Apple TV - at least, not yet. I have ordered one, but it will not be delivered until some time next week (sneering glance at Steve & Co. for abandoning that platform rather than making it AirPlay compatible).
But that is not really my issue: my issue is that my two Airport Express units do NOT show up in the iPhone, though the DO show up on my iPad. This tells me they have been properly configured (both units have names, and are connected to the house network), so there must still be something missing from the equation.
And, judging from the response of a few others who have chimed in here, I think it's save to say that the experience is not altogether uncommon.
I'm surprised nobody has come back with a more direct solution to the common issue. I may have to call AppleCare someday this week...
--PS

How to use a JavaBean with request scope from one page to other page

Hi,
I want to use in one jsp file a javabean with scope of request for it, I use:
<jsp:useBean id="entry" class="jsps.SaleEntry" scope="request" />and after in that page I make operations with it using the jsp:setProperty and jsp:getProperty operations
My question is that if I want to get the result of that javabean in the following page, Have I to record the javabean doing : request.setAttribute(""objectId",id) and then in the following jsp page I can rescue the object doing: SaleEntry sE=(SaleEntry) request.getAttribute("objectId") ???
or in the contrary, only using jsp:setProperty the information is available to recover it in the following jsp doing : SaleEntry sE=(SaleEntry) request.getAttribute("objectId") because setProperty records the information without need of doing : request.setAttribute(""objectId",id). ????
Thanks with anticipation and sorry if it is a silly question but I am beginner in the use of JavaBeans

Thanks Anthony,
I'm working with Tigi on the same project and now I can tell you that the problem is solved.
request.getRequestDisptacher("/myServlet");hehe, you switched the 't' and the 'a'
<%@ include file="/myServlet" %>this is the one we use :)
But what is the difference between the first one and the last one? Now We are using the last one because that's the shortest :) not a pretty good reason huh :)
cheers,
Soep

Ipod Touch 3rd Gen - not recognized by computer or itunes. Shows cable pointing to itunes logo. Can't reset it. Doesn't work at all. Have tried all the supposed fixes on the apple site with no luck. It suggested asking other users !

I have a 3rd Generation ipod touch that is not recognized by itunes or my computer. My itunes works with other apple devices I own. I cannot reset the ipod touch and can never get to the screen where it is supposed to show a red battery to turn it off. I can't reset it. Have tried to use the suggestions on the apple site to no avail. Any suggestions ?

From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

How do I add a gradient to a layer mask to counteract a gradual change in tone from one end of a photo to the other?

I swear I must be going nutso. I have a photo taken with a rather extreme 10mm shift of a shift lens, which consequently has a gradual darkening toward the top of the photo. No problem, says I. I just added a layer mask, clicked on the gradient tool and drew a line (in the appropriate direction) with that tool. What I got was a transparent area at the black end (of the gradient applied to the mask) grading to the darker part of the image showing through at the other end (of the gradient.)
I've done this before, and did the above instinctively, so I thought I was doing it right. When it didn't work, I tried applying the mask and gradient to a duplicate background layer, then flattening the image. Nada.
Jees. Something set wrong? A different blend mode than normal? I even checked with a CS6 guide by Martin Evening, who seems to be able to do exactly what I wanted with no trouble.
Or......maybe I am going nutso :).
Thanks in advance,
BAB

Thanks, that's exactly what I've done.....now I'm at least certain I'm not going nutso . Specifically, I have image 2 stacked above image 1, with the mask for image 2 appearing on the same layer. However, when I apply the gradient, exactly as you have indicated, I do not get image 4. Instead I get image 2 showing through at the top where the mask is white, and then a gradual fade over the black part of the mask to the diamond pattern typical of transparent layer.
Well, I be darned. I just tried it again and now it's working exactly as you described and exactly as I had expected it to. I was using a .psd and wondered if that were the problem, although why I couldn't imagine. So chose a .dng I had just downloaded and the process worked perfectly. Huh? So I went back to the .psd (a test image that I had done to see how much falloff there would be using this shift lens at it's fullest shift) and it worked perfectly also. I have no idea. I promise you I did exactly as you indicated above in all the times I tried to get the falloff subdued. Yes, I did the mask in the right direction, as you've shown above. Yes I used a duplicate layer, and yes I applied the mask to the duplicate layer. I can even get it to work using the mask applied by the Curves layer I used to lighten the duplicate layer. If you can think of anything that may have been set wrong, please let me know, because I think I checked everything including layer properties and those of the gradient tool as well. And I'm certain it will happen again when I'm on some deadline and really need the gradient. You know about Murphy's Laws, right?
Thanks, though. I'll mark this question answered and if I find something I set wrong, on purpose or accidentally, I'll pass it along.
BAB

I bought a tv series from iTunes , and now I can't seem to watch it anymore be ause I keep getting a pop up stating that I don't have permission ... ! Huh ! I'm using an iPad 2 anyone know what to do

I bought a tv series from iTunes ... But now that I'm 1/2 way i get a pop up telling me that I don't have permission to view it ... Huh ? So now what do I do ? All the previous episodes I have in iCloud ... I'm using an iPad 2 ... Anyone shed some light on this

It means what the message says. The format of the song can't be converted to a format compatible with the iPod.
Does it play in iTunes?
Where id the song come form?
Try deleting and reimporting into iTunes.

HT5628 Trying to Install Windows 8.1 on my late 2013 21.5" iMac. After I Format the Bootcamp partition, Windows Setup tells me "Windows can't be installed to this disk because it is GPT partitioned." Huh?

Trying to Install Windows 8.1 on my late 2013 21.5" iMac. After I Format the Bootcamp partition, Windows Setup tells me "Windows can't be installed to this disk because it is GPT partitioned." Huh?

You must use the Windows formatter to format your Windows partition NTFS. Please be sure you select the Windows partition otherwise you might end up formatting your OS X partition NTFS.

Premiere to After Effects CS5 - lost transitions and other stuff....

Hi guys,
We are learning this stuff by using the 'hammer to the head' method...
Premiere CS5 to After Effects CS5 'replace with after effects composition' method loses the trasitions that were placed in Premiere. They don't show in the After Effects composition. Fine.
So, doing the all the effects and Magic Bullet effects in the footage and then doing a multi-machine render to a PNG sequence is fine. Then, instead of using Media Encoder to assemble the PNG footage back to an AVI to re-import to Premiere, it's FAR faster to have after effects re-assemble the PNG to an AVI. Here's where the 'weirdness' comes in. We import the newly assembled AVI-PNG sequence to Premiere and CAN"T ADD transitions to the AVI file. We will put in the cuts where we want it and it doesn't work! HUH? Here's where things go really sideways...If we assemble the same PNG sequence using the ultra-slow Media encoder, we can then do transitions in Premiere. WHAT! I don't get it. What is After effects doing differently than Media encoder to put it all back together?
Sorry for the 'frustration', but man, what is goin on?
Thanks again for everyone's time.
Jason

See my reply in your other thread. Re-reading this post I do get the impression, though, that you are messing up the frame rates somehow and thus run into problems...
Mylenium

I purchased a film but it won't play because iTunes says I need to authorize the computer, but when I do that it says the computer is already authorized. Huh - some system. Any ideas?

I purchased a film but it won't play because iTunes says I need to authorize the computer, but when I do that it says the computer is already authorized. Huh - some system. Any ideas?
Using Windows 7

Hey Louni,
Thanks for the question. I understand you are having issues with Authorizing your computer to play content. The following articles may help to resolve this issue:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks,
Matt M.

Exported Movie looks good in Quicktime, but not in any other Player?

I Have noticed that the text that I have exported from After Effects were looking jagged in windows media and Kmplayer. At first I thought it was my render settings that were making it look low quality, but then I found that when played in Quicktime the movie look high rez. only problem is that quick time is extremely laggy when I open up my movies. Why is this happening?

Huh? That's simply hardware scaling. Your movie is not being viewed at 100% size.
Mylenium

I need help ASAP, edits are showing in PS, but not in other programs

I hope someone can give me an answer. In only one folder, I have edited JPEGs that show edits in Bridge, Camera Raw and Photoshop, but not in Windows Explorer. I discovered this when trying to burn them on a disk. Is this something related to a setting in Bridge and is tehre a way to fix it so it accepts all the changes. Thank you!
P.S. I am using CS4

Uh huh...that's to be expected unless you actually opened and processed the images through Camera Raw and Photoshop. All you've done to this point is edit the metadata settings, not the actual pixels. To see the final edits in other apps, you'll need to process the files and resave them as completely edited files. Bridge will properly diaply the metadata edits...but nothing else can.

Problem exporting .pdf to ANY OTHER FORMAT - is it me?!

Hello,
The seasoned tech person will surely roll their eyes a dozen times while reading about my odyssey...
It started as a project in Pagemaker 7 (I know, I know - I'll definitely be moving to InDesign CS4 after this!). I exported the .pmd file into .pdf and sent the .pdf to a committee for review. When the edits came back, I planned to open my PageMaker files and edit them, then reexport. Well, wouldn't you know I HAVE NO IDEA where I put the most recently edited .pmd files. This is nuts - as I am pretty religious about saving/backing up to at least one device other than my PC. (Note: I checked the last time I sent the draft out and it was 5:15pm on a Thursday, so I must have been in a mad dash to get to happy hour and just got careless...My fault.) Anyway, so now I am stuck with a stupid .pdf and OLD .pmd files.
So, my questions are as follows:
1. There is no way I can convert a .pdf into a .pmd file is there? I've looked into this and it really doesn't seem so. Would it then be possible to convert a .pdf into an InDesign file? Probably not, huh?
2. Ok, so seeing how I am probably stuck with the .pdf - - I thought I might be able to export it as an .rtf so I could copy and paste the most recent text into my .pmd file so I don't have to do a ton of re-edits. Brilliant, I thought. You've found a solution! Um, not so much...
Now I can't export the .pdf as ANYTHING - .rtf, .html, .txt, .doc - - - it all turns into symbols. It tells me that Frankin Gothic Book can't be found and then it lists several numbers after the font (eg: Franklin Gothic Book 11,15,23, etc, etc...).
But I have that font installed on all the programs I use! What is going on! Can anyone help me??
Thanks so much!
kate

Hi! Thanks for your answer!
Well...
1. If it were up to me I'd just keep it in the editing software until a final product was ready but I had to send .pdf versions out to people who don't use PageMaker. It was just my own haste that probably led me to send the .pdf out (after 5pm), shut down my PC asap and run off to the bar (or at least that's how I imagine it happened...). As a rule I back EVERYTHING up to my external or a thumb drive ALWAYS. Evidently not anymore. Or maybe I just fail to back up the IMPORTANT documents. Arrrgh.
2. And yes, I checked my work PC, both laptops, my flash drive and external thoroughly and could not find it. I was able to see, in the "Recent Documents' option under the 'File' tab in PageMaker (both at work and on my laptop, weird..) that I had used the files there but when I thought, "OMG YES!!!" and clicked on it, it replied that the file could not be found.
So yeah... Meanwhile, I've found what I hope is a way around my conundrum. Unable to export the .pdf to .doc or .rtf so I can cut and paste that version into an older version of the .pmd files I've LOST (Franklin Gothic is acting like a JERK... not sure what's going on there...) I downloaded a free .pdf to .rtf converter that didn't have a problem with it.
And so I spend a beautiful afternoon cloistered inside, fixing my stupid mistakes.
Thanks so much for your insights - I really appreciate your help!
Thanks!
kate

Rollover only works on the border in internet explorer but works fine in all other browsers

I created an aerial map and on specific areas I created a rollover, meaning when you rollover an the image of exp. a house a picture of the house pops up in bigger. It works really well in all browsers..... but in Internet explorer. In internet explorer nothing rolls over. but when I put a border, it does rollover but only when the mouse is on the border. I do not want the border there. I want it to rollover when teh mouse is on the area How can I solve this issue just for internet explorer.
Below is my coding i used:
In HTML:
<div class="map">
<img src="Img/map-of-area.png">
<div class="maparea">
<a class="volley" href="htmlmainhouse.html"> <span> <img src="Img/photos/map/fields.JPG" width="170" height="130" alt="sample" border="0" /></span> </a>
</div>
</div>
In CSS:
a.volley{
/* border: 2px solid red; */
height: 35px;
width: 90px;
position:absolute;
top: 310px;
left: 275px;
z-index:20;
a.volley {
display:inline;
z-index:30;
a.volley span {
display:none;
a.volley:hover span {
display:block;
position:absolute;
top:1em;
left:1em;
width:64px;
height:64px;

For rollovers on image maps, you'll get better cross-browser results with JavaScript functions. See link for details:
http://www.htmlgoodies.com/tutorials/image_maps/article.php/3479771/So-You-Want-An-Imagema p-Image-Flip-Huh.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Tableview : inputfield and other stuff in the same cell ?

Hi everybody!
I wonder how I could do the following :
in a tableview, using iterator, have a cell with both :
- a free text (html)
- an inputfield
the result would be a table like that :
Item       |       Weight         |         Length
10000125   | = [inputfield] kg   | = [inputfield] m
10000132   | = [inputfield] kg   | = [inputfield] m
Huh? Would be fine, like!
Maybe someone could help me ?
Because I know how to insert the input field :
DATA col1_inputField TYPE REF TO CL_HTMLB_INPUTFIELD.
CREATE OBJECT col1_inputField.
p_replacement_bee      = col1_inputField.
and also the free text :
p_replacement_bee = CL_HTMLB_TEXTVIEW=>FACTORY( text = html_output ).
... but how to mix them together ?
Thanks a lot for you all for all past and coming help!
François

Hi Francois,
this can easily be achieved with a bee table. You can do something like this:
DATA: if_input TYPE REF TO CL_HTMLB_INPUTFIELD,
      if_text   TYPE REF TO CL_HTMLB_TEXTVIEW.
if_input = CL_HTMLB_INPUTFIELD=>FACTORY( id = p_cell_id
                                         id_postfix = '_input'
                                         type = 'INTEGER' ).
if_text = CL_HTMLB_TEXTVIEW=>FACTORY( id = p_cell_id
                                      id_postfix = '_text'
                                      text = 'my text' ).
DATA: whole_cell TYPE REF TO CL_BSP_BEE_TABLE.
CREATE OBJECT whole_cell.
whole_cell->ADD( if_input ).
whole_cell->ADD( if_text ).
p_replacement_bee = whole_cell.
Please also have a look at weblog:
/people/brian.mckellar/blog/2003/10/31/bsp-programming-htmlb-tableview-iterator
Regards,
Rainer

1.57GB of "Other"??? Huh??

Similar Messages

Maybe you are looking for