1.6.2 remaining schedule

VHO01   Carrollton, TX
VHO02   Temple Terrace, FL
VHO03   Pomona, CA
VHO04   Silver Spring, MD
VHO05   Queens, NY
VHO06   Burlington, MA
VHO06a Rhode Island
VHO07   Freehold, NJ
VHO08   Philadelphia, PA
VHO09   Richmond, VA
VHO09a Norfolk, VA
VHO10   Fort Wayne, IN
VHO11   Pittsburgh, PA
VHO12   Portland, OR
VHO13   Seattle, WA
VHO14   Harrisburg, PA
VHO15   Buffalo, NY
VHO14 VHO15                   1.6.2 26 FEB 2009
VHO07   VHO08                   1.6.2 10 MAR 2009
VHO12   VHO13                   1.6.2 17 MAR 2009
VHO05   VHO06 VHO06a 1.6.2 24 MAR 2009
VHO04   VHO09 VHO09a 1.6.2 31 MAR 2009
VHO02   VHO10 VHO11 1.6.2 07 APR 2009
VHO01   VHO03                   1.6.2 14 APR 2009
This has been posted several times and we had to remove it until the ok was granted. I do apologize for any and all confusion regarding the deployment schedule.

just tell me one thing, Techman - is this going to solve the 'currently unavailable...' problems. I live in Pittsburgh and I've only had FIOS TV for a week but I have already experienced this problem. Your system seems to have a few quirks in it and I truely hope they will not multiply. If I get this upgrade on April 7th will things start running the way they should? Thanks.

Similar Messages

Have BOM re-exploded, yet remain Scheduling in firmed plnd order unchanged?

Dear experts,
Is there any way to have BOM re-explosion carry thru in planned order, but leaving the Scheduling info in the firmed planned order unchanged?
(in respect that BOM refreshed frequently, with quite a few firmed planned orders involved)
Environment: ECC 5.0
Appreciated to any thought,
Thank you,
md

Hi
I was checking the Planned Order (T-code: MD12) and there 2 separate options avaialable for (1) Explode BOM (2) Scheduling
you can find these options as EDIT >> Explode BOM (or) EDIT >> Scheduling.
please check, whether these options may be helpful.
Thanks
JK

Error in Scheduling.

Hi all,
When i tried to burst a report, the status doesn't change to success or failed. It remains Scheduled for long time.
And the report output too not found in that destination folder.
Kindly help me in resolving this issue.
Regards,
Vinoth.

Errors for FUNCTION SYSMAN.ENCRYPT:
LINE/COL ERROR
5/5 PL/SQL: Statement ignored
6/22 PLS-00201: identifier 'UTL_I18N' must be declared
RAIDB102.REGRESS.RDBMS.DEV.US.ORACLE.COM>show errors
Errors for FUNCTION SYSMAN.DECRYPT:
LINE/COL ERROR
10/5 PL/SQL: Statement ignored
10/12 PLS-00201: identifier 'UTL_I18N' must be declared
I pulled the source, didn't help. I must have messed up the code in the DD.
Is there I can get the original copy.
Thanks,
Prakash

Unable to get job status via BIP web service

Hi,
I'm scheduling a report job using the method scheduleReport of the ScheduleService web service. The method returns the jobId correctly, then I check the job status using getScheduledReportStatus.
Every time the method returns jobstatus = "Scheduled", but the report is finished. I noticed that BIP schedule a child job with different jobId (why?) and If I use it, the getScheduledReportStatus return a null status.
Using the method getScheduledJobInfo I have all the information, but how can I get the child jodId ?
Best regards,
Alessio

Hi Alessio
I know this was a long time ago but i was just taking a chance:
Quick question: did you get this to work? I can schedule a report using the ScheduleReport sevice, but when i query the status using getScheduledReportStatus, the status remains 'Scheduled', even after the job has run. The job also does not appear in the Job History of the report. The report is set to burst, which it does correctly.
Do you have any ideas?
Thanks very much.

IDocs not being generated...

Hi,
In my interfaces(file->XI->Idoc), The Idocs remain scheduled on the outbound side with green flags. They don't get generated and delivered to SAP. I've checked the queues(empty). The idx1 config is fine. What next?
Regards,
Harsh

Hi,
Check out the trace message in the SXMB_MONI ,
Are you using BPM here ? If so check the BPM status
Check all queues are registered ? SXMB_ADM and check out this
Then also check about Receiver determination and Receiver Business Service is pointing to correct R/3 system.Look into Adapter Specific Message Identifiers for the Reciever Business Service.
regards,
moorthy

Pushing data from abap system to SLD

Hello,
I am pushing data from my abap system to SLD.
Job SAP_SLD_DATA_COLLECT is successfully finished but the job SAP_LMDB_LDB_0000000001. is not visible in sm37 in solman.
Hence technical system is not visible in LMDB.
Please guide me
Thanks and Regards,
Akshay

HI Akshay
I hope you had make sure that in SM61 you have assigned batch servers for the jobs.
Can you try to sync your LMDB with SLD once. There is option in LMDB to sync the data, Just see if you are getting the technical system details.
Also, please check the rfc destinatoin with ICM port if it is stable.
RFC LMDB_SyncDest<X> is using ICM Port 80<NR>
You can proceed as below
Please De-Activate the Sync Job in Solman_Setup -> System Preparation -> Prepare Landscape -> Set Up LMDB.
Execute transaction 'SM59'.
Locate the HTTP Destination -> 'LMDB_SyncDest<X>'.
Switch to Edit mode.
Change the Service No to 5<XX>00 where XX is the instance number.
Then makesure the Authorization and Connection test are working.
Then Re-Activate the synch job, via Solman_Setup -> System Preparation -> Prepare Landscape -> Set Up LMDB
Apart from that, can you check below note if it is applicable for you
1615263 - LMDB: Incremental Content Sync Job remains "Scheduled"
Regards
Rishav

Problem: Intermittant accesst to remove DVR function from work, plus unrelated(?) hub issue

Hi folks.
We have the DVR with media manager and multiroom and all that. I love it, but two things are going on.
1: I can sometimes, but rarely, get to remove DVR functions from the webpage. When I log in I can see the caberbox status that tells me how many hours of recordingI have left. However, I don't see an icon on the left that lets me record or delete things, nor can i see anything when I click the DVR button from the cablebox status page. Whats going on? Sometimes I can see it, but not often enough.
2: When watching DVR'ed programs in the bedroom, occiasionaly we get a popup message that covers the screen saying something about losing connection to the hub or something like that. IT then stops us from watching the recorded program, and makes us go back again from the begining. Any idea what thats about?

BDMacD wrote:
Hi folks.
We have the DVR with media manager and multiroom and all that. I love it, but two things are going on.
1: I can sometimes, but rarely, get to remove DVR functions from the webpage. When I log in I can see the caberbox status that tells me how many hours of recordingI have left. However, I don't see an icon on the left that lets me record or delete things, nor can i see anything when I click the DVR button from the cablebox status page. Whats going on? Sometimes I can see it, but not often enough.
2: When watching DVR'ed programs in the bedroom, occiasionaly we get a popup message that covers the screen saying something about losing connection to the hub or something like that. IT then stops us from watching the recorded program, and makes us go back again from the begining. Any idea what thats about?
There have been hub errors and other issues with HM DVR and I believe it is fixed with th 1.6.2 software that is being rolled out nationwide. There is a post about 1.6.2 that shows the remaining schedule of where and when. If you go to menu/ settings/ System Information, it will show you what version you have.
Here is a link to that posting.
http://forums.verizon.com/vrzn/board/message?board.id=FiOS_TV&thread.id=8917
Message Edited by prisaz on 03-26-2009 05:10 PM

Still 1.6.0, when 1.6.x?

I have had 1.6.0 since I started with Verizon last November. Since then, I sometimes asked about the picture quality on non HD channels (too blurred) and was told that because 1.6.0 makes pictures too soft and that the problem was known and that 1.6.0 would soon be replaced with newer versions, say 1.6.1 or 1.6.x, hopefully by the end of 2008 or if not, early 2009. But so far nothing comes. Can anybody of Verizon team tell me what's going on and what should I expect. To be honest, I would say that the picture quality on Verizon's non HDs are far worse than that of Cox or Comcast. Thanks.

http://forums.verizon.com/vrzn/board/message?board.id=FiOS_TV&thread.id=8917
Posted a few posts down from this one...remaining schedule for 1.6.2

Scheduling Agreement Delivery Schedule Line Remains When Fully Delivered

Hi Experts!
I had an issue regarding our scheduling agreements. Issue is below:
Our delivery schedule lines remain on the delivery schedule list item detail screen (VA32 or VA33), even though the delivery has been delivered and completed. The only way this seems to disappear is when a new schedule line is loaded. Why do the old delivery schedule lines remain on the JIT delivery schedule list even though they have been fully delivered and completed?
This is an urgent matter. Any responses will be greatly appreciated and points. Thank you for your time!!
Best Regards,
WC

Hi Shravan,
Thanks for answering, I checked those two tables EKEH, EKEK are release tables. We have some SAs without release documentation. I have to find the delivery schedules using the GR document to which delivery schedules the qty it is delivering.
It is not posting the qty from top of schedules, for some SAs it posted randomly.
Any other ideas or any function modules,
In BW it is possible using extractor but we need in R/3
Thanks,
Satya

Messages remain in Scheduled status in message monitoring in RWB

Hi PI experts,
I have got a situation where there are several messages showing in the Scheduled status. I followed the path RWB > Message Monitoring > Adapter Engine > Database (Overview) > Display.
QoS for these messages is EOIO, however there are no messages stuck in the queue. All other channels are running smoothly. Only with this particular channel the messages remain in Scheduled status for a long time.
I am neither able to make out the roor cause nor reprocess/resend these messages. Pleaes help.
Regards,
Dhawal

Hi Suraj,
What you said is absolutely correct. However, as I mentioned, the error message was not visible in RWB.
My problem just got resolved. What I did is this,
I followed the link http://<server>:<port>/MessagingSystem/monitor/monitor.jsp which is SAP Message Display Tool.
Here in EOIO Sequence Monitor I found the error message and it's predecessor. When I resent the erroneous message from here, all subsequent Holding messages got processed.
Thank you everyone for your help. Have a gr8 day...
Best Regards,
Dhawal

Remaining capacity requirements scheduled for operation in Planned Order

Hi all,
I'm workig with planned orders, and I need the "Remaining capacity requirements scheduled for operation" data to list it in a Z Report, but I don't know how to get it.
You can see the info in the "Detail Scheduling" of the planned order in MD13.
Anyone knows how to get the info? Any table or any FM to get it?
Points will be given for helping
Thanks in advance!

Did you ever find out where the planned order capacity information lives? I can find the production capacity information in table KBEZ, but it appears that there is no planned order info there.
Thanks,
Matthew Bruckner

Scheduled reports (DeskI) remain in status "Pending" in SP4(FP 4.3)

Hi,
I am facing a weird problem with a BO XI R2 cluster installation (2 Windows Servers, one CMS, 2 DeskI Job servers on one node) after installing SP4 + FP 4.3. The users are allowed to schedule DeskI reports they created themselves. The scheduling works out fine at the beginning but at some point overnight the DeskI servers (although empty) completely ignore the fact that there are available jobs for scheduling. This means that the DeskI reports remain in status "Pending". Changing the "maximum number of jobs" setting at the CMC in the DeskI job servers properties tab seems to work like a wake-up call and the scheduling starts again. After a while though (can take up to a day to get there) the job servers start again to ignore the pending jobs.
Is this a known issue in SP 4? Anyone had similar experiences two?
Any help/ideas & hints will be highly appreciated.
Cheers
Stratos

Hi Will,
Quote: "In any case, in normal circumstances, you should not having pending jobs if your number of running numbers is below your max number of jobs setting". Exactly this is what we are expecting but the job server seems to sleep not caring about the actual number of pending jobs und wakes up only if we use a high setting (40) for the maximum number of jobs.
Have found some references about similar problems for both the Web Intelligence and the Crystal Report Job Servers but not a real solution so far. It may be a problem with the CMS but I am not really sure. Restarting the CMS does not help neither.
Cheers
Stratos

Jobs Scheduled But Never Run or EM jobs remain in 'running' status

Hi All,
Please I need help on this: I have job scheduled through Oracle Enterprise Manager (OEM) but each time our Windows server is shutdown for patches update the job I scheduled failed and in the status column it shows that the job is still running ( Note: I do know how to stop/delete this job) BUT I will like to know if there's anything I need to do so that each time our server is shutdown the scheduled job will not fail to run.
Thanks
Wale

Jobs Scheduled But Never Run or EM jobs remain in 'running' status what is the output of user_jobs and user_jobs_running views when this happens? especially last_date, last_sec, failures, broken columns.

Jobs remain in status SCHEDULED

Hi all,
does anyone have an idea what to do when scheduled jobs which should run remain in status SCHEDULED instead of changing into RUNNING? The transaction run if started manually in the workbench.
I will restart MII but hoping to find another way to get the scheduler working. The system is MII 12.0.2.
Michael

Hi Nick,
thanks for your reply.
Actually the save "trick" is the one that mostly cures those problems, but not in my case. The status is correctly set to PENDING after saving the job, but when started again, the job got stuck in status SCHEDULED instead of RUNNING. When I try to run the job directly from the Schedule Editor, it says it has run, but actually it didn't.
I have also tried to stop and start the scheduler, but no change.
Michael

UltraSearch schedules always remain in "LAUNCHING" state

Hi,
We configured ultrasearch in our 10.1.4 portal to search among our portal pages.
Our problem is that each time we create a new schedule, it always remains in state "LAUNCHING".
We are under a linux server with 3Go RAM.
Thanks for your help,
Best Regards,
JCA

Hi,
I'm not sure about the connection with Portal here.
This forum, "Portal Search", is the best place for questions about Portal Search and Ultra Search integration with Portal.
For any Ultra Search questions which are not regarding the integration with Portal, you will find Ultra Search specialists on the Ultra Search forum (Ultra Search

1.6.2 remaining schedule

Similar Messages

Maybe you are looking for