1/8" == 1/8" cable with right-angle ends?

I'm looking for an audio cable with mini-plugs (1/8", 3.5 mm) on each end, with at least one end with a right-angle plug.
I've scoured the web (and my local Radio Shack store) but can't locate one. Is such a thing available?
(FYI I want the cable to attach my iPod to my car AUX jack. Having the staight-end plug jutting vertically off the top of my iPod is so very unsightly...which is why I'm looking for the right-angle connector...)

Posted too soon! Thanks to Froogle (as opposed to Google), I found one: http://www.camcor.com/cgi-bin/cat/id=1130272466

Similar Messages

Please recommend a right-angled PCI-e 16x riser card/cable for a Media Live

The IGP in my Media Live is not running properly, or nVidia's drivers for it are just crap (more likely, I guess), so I need to fit a dedicated video card. The riser fitted for the supplied Hauppage WinTV card is for a PCI slot... I have Aero turned off, which ameliorates teh problem but some windows/applications still don't render properly.
I am having trouble finding a suitable riser card for a PCI-e 16x slot though. The main problem is that the 16x slot is not directly underneath the mounting points for the riser card, which means I need a riser with a flexible cable. Secondly it needs to be right angled and thirdly the slot needs to lie lower than the mounting holes. Most every riser card I've seen has the slot level with or above the mounting holes, however this would not work in the Media Live case.
In a pinch, I guess I could live with a PCI graphics card... but are there ANY modern PCI graphics cards????
So is there a recommended riser card I should use, or am I stuck?

CPU in and running fine. No issues so far, although I haven't run it under load yet.
My Titan heatsink was a tricky fit, the heatpipes are literally touching the RAM heatsinks (though not pressing against them) and the holes in the motherboard were on the large side. Installation instructions were ok but parts bags mislabled! And the supplied thermal paste was horrible... still, it really is a low profile heatsink and one rated to 130Ws - unlike just about every other one out there! The fan I fitted is a Scythe Gentle Typhoon 92mm unit and is really quiet! I hadn't realised just how noisy the original machine was, but with the Typhoon and the Silverstone PSU fitted it is genuinely quiet. Lastly, unlike the GT64 fitted before, it's fins go sideways, not front/backwards, and that means air coming off the heatsink will now go over the heatsink on the NB...
Speaking of which, I discovered the NB heatsink was rather loosely fitted. I'm going to score an aftermarket one with a bigger sink and *maybe* a fan and fit that soon. With proper thermal paste.
Lastly, since they were mentioned as a potential problem, I took a pic of what I think are the VRMs?
If I'm right, I can readily fit a heatsink to those if it would help.
With 8GBs of RAM and a 600GB Velociraptor coming, I am going to do a new windows build soon with 64bit Ultimate. After that, all I have to do is source a slot-load BR drive and the upgrades will be done. Modding the case will be another job...

My iphone 4 photo auto rotation was not functioning, might be accidentally locked as I can see a locked symbol with a circle with an arroe surrounding it at the top right angle , next to the power % indicator. Please advise how to unlock it.

My iphone 4 photo/message auto rotation was not functioning, might be accidentally locked as I can see a locked symbol with a circle with an arroe surrounding it at the top right angle , next to the power % indicator. This function was working perfectly since day 1.
Please advise how to unlock it.

Swipe upwards from the bottom of the screen to open Control Center. You will then find the orientation lock in the top row, last icon on the right. White is on, black is off. Tap and turn it off. If you see the lock symbol, then orientation lock is on, and that is what is keeping it in the portrait mode.

How to implement my right angle routing strategy in Ultiboard?

Hi,
I want to design a PCB to save me from a lot of dirty work with SCB68 blocks. We are using many PCI-6225 cards to aquire 0-10V signals from a test rig. The signals are bundled together as 20 channels per cable including 20 signal wire and 1 AI_SENSE wire.
So I need to convert two SCSI 68pin connector to four Dsub37 female connectors for each PCI-6225 card. I used Multisim to build the schematics and Ultiboard to draw PCB. First I cannot find PCI-6225 connector's information in multisim, so I used M_series 60x1's symbol in the library and modified it to meet the datasheet of PCI-6225.
Then when I transport the file to Utilboard, the auto routing algorithm gave me a spider web :-( So I want to use the following right angle routing strategy to get a simpler PCB. red line is in the copper_bottom, green line in the copper_top, and blue circles are vias. the rest of the board will be covered with GND.
The only problem is: I do not know how to implement this alogrithm. Can anyone help me?
P.S. I do not have strong EMI requirements. So I think this design should be fine in my low speed DAQ application.
DI CHENG
Attachments:
设想.png ‏20 KB
6225_2xSCSI68_4xD37F.zip ‏272 KB

程迪,
You could also route a bus - create all signals on the 68 pin connector as part of a bus group then press (Ctrl_B) and click on all signals that you want to route within the bus and then start routing away from the connector on your preferred layer.
These best practices guides in Ultiboard should also help with routing techniques...
https://decibel.ni.com/content/docs/DOC-26701
Regards,
Pat N

Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,thanks, Derek

Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,any ideas? thanks, Derek

Dave I'm glad to say that it works perfectly but I'm embarrassed to say that my 12 year old nephew hooked it up in about 10 minutes.
If you have the Kanex Mini DisplayPort cable it will work, what confused me was changing the display settings in System Preferences,
and dragging the mac screen from the mac onto the tv. Sorry I cant be more helpful but you have the right cable now you need a 12 year old nephew.
Good luck Derek

Right Angle 90-degree Power Adapter Connector Converter for TOSHIBA Qosmio X875-Q7290

Hello, I am having problems with my power connector not staying in it's socket allready!!The laptop is on a small table and the laptop is only used a few times a week!Is there a Right Angle 90-degree Power Adapter Connector Converter for TOSHIBA Qosmio X875-Q7290?I think this would help solve the problem. Thank You

Get an aftermarket universal charger, perhaps? Their connectors are mostly right-angle. I have some iGo Green model that looks like this but is an older model. http://www.newegg.com/Product/Product.aspx?Item=N82E16834993922

IBook 12 Dual USB Inverter Cable with Reed Switch

I apologise if this should go on an older thread. The last time I was trying to access what was called the angle of death thread it took so long to load I gave up.
My question is: my G3 iBook 12" 500 is working perfectly as a backup for surfing and using Word, with a fairly new replacement hard drive in it. But it has started the backlight blanking out when the screen is moved through 90 degrees. From a recent post I noticed yesterday that must have been moved, I now understood that the problem was usually, or often, to do with the need to replace the Inverter Cable with Reed Switch. I live in the UK and cannot get this done locally, but an online UK firm agrees this is usually the problem and he can fit the part and do the repair which with labour costs and postage will be not far off £100.
Is it fairly safe now to assume that this part is the root of this problem?
thanks
Tom Older
Mac Mini G4 1.25 iBook G3 500 Mac OS X (10.4.8)

Thanks for the reply clarifying the matter. In fact it's now been explained to me that with postage plus vat it goes from £31 plus tax for the part, then £75 plus tax for the labour, then £15 plus tax for the postage, which comes to £142 total.
I think I'll try to keep working at 89 degrees for a bit yet then if I have to I'll buy the part and see if I can get a cheaper way to get it installed. Don't trust myself with such a job.
Mac Mini G4 1.25 ibook G3 500 Mac OS X (10.4.8)

Firewire-B cable with built-in trigger lines?

Hi all,
We are building multiple vision systems. Each system has a camera with Firewire-b cable and also a Trigger Cable (with 3 conductors).
For our application, we need as few cables as possible. Our users are very concerned about having too many cables.
Does anyone know if I can purchase a firewire-B cable that has trigger lines. Some kind of two-in-one cable?
Our best option right now is to use spiral wrap.
- John

The signal is being generated by an NI DAQ card:
Pin 1: +5V
Pin 2: DGND
Pin 3: A digital pulse train that fires the camera shutter. From 0.25 Hz to up to 60 Hz.
Not really sure about jitter or latency. I'd rather not have much of either. But don't have specific requirements.
How can I put the signal "in band" with the FireWire cable? Are there unused pins I could utitilize? Not sure if it'd be worth the effort, but I am curious.
Thanks! This machine vision board is very helpful!

Av Component Cable with the iPod Mini?

My son bought me the AV Component Cable for my Mini to link only the audio with my RCA inputs of my preamp. I couldn't find anything in Apple Support that says I can do this, and I talked with an Apple tech rep who didn't know but thought by referring to the specs for the Mini that it is NOT compatible. Now granted, I could just open the box and find out, but I thought I 'd ask to see if anyone has tried to use this cable for this purpose and succeeded or failed.
Any takers?

AV Component Cable - I need to know more details about this cable.
But if it came with an iPod dock (the dock that allow you to place your iPod mini with it), what you need to do is to connect the AV component cable between the dock and your preamp as follow:-
1.The jack of the dock (in red colour) -> AV component Cable -> Audio in (or CD/Tuner) of your Preamp (in red colour of Right Channel)
2. The jack of the dock (in white or black colour) -> AV component Cable -> Audio in (or CD/Tuner) of your Preamp (in white or black colour or Left Channel)
In case it did not come with the dock then what you need to do is either :-
A. Plug your cable with the dock of your iPod Mini (the buttom of your iPod) or,
B. Plug your cable with the headphone jack of your iPod Mini
Then connect to other end of your cable with your Preamp (Audio in)..
Message was edited by: Mitch 751

How to create right-angled arrows or lines to connect forms?

Hello,
I am new in this forum and I would like to know whether there is an easy way to create right-angled arrows to conncet forms. Currently I create several lines and put them together manually. This is very time-consuming.
Is there an easier way to do this in pages1 or keynote2?
(I want to create an organization chart!)
Thanks for your help.
Juergen
Mac OS X (10.4.8) iMac G5 20"

A copy and paste procedure might help here, but Apple's Clipboard only holds one item at a time, which is limiting. Copy something else and your previous item is gone. One way to overcome that limitation is with a utility called CopyPaste available from scriptsoftware.com. CopyPaste offers a hundred or more clipboards. I use it to store either text or objects that I use over and over. The palette collapses and a small icon floats above all else. Just stick it in a convenient place and it will open when you mouse over it. You could create your arrow once, copy it to Copy Paste, and paste it in where ever you need it. It won't be erased from the clipboard when you copy something else and it will be remembered when you shut down or restart. You can create, name, and organize multiple clipboards to file items you constantly reuse.
To be able to move your arrows arround, be sure to click outside the layout area before pasting.
Hope this helps.
Walt

Can anyone recommend a short 3.5mm right angled jack lead to protect my vertical headphone jack ?

i keep damaging headphones where the male vertical jack catches, bends and breaks the connection.all the jacks i have found either have poor reviews or 1 meter cables.
any short right angled jack advice greatly appreciated

Once you get this TOSLink cable, you might consider buying this Gefen "Digital Audio to Analog Audio Converter". It takes the optical (fiber) cable in or RCA digital in... and gives you an RCA stereo analog output. Of course, it's not digital anymore, but it's great for getting clean sound out of a laptop and into an analog application.
It looks like this;
This is a great device to have and only costs around $60.

My cat likes to lick and chew on iPhone charging cables. What does Apple coat their cables with?

My cat likes to lick and chew on iPhone charging cables. Only Apple cables, she is not attracted to any others in our home. Has anyone else had this happen.
The Kindle and iPhone cables are right next to each other. She only likes the Apple cable leaving the Kindle cable untouched.
What does Apple coat their cables with?
Thanks in advance

I'll go ahead and suggest it. My cat has chewed (and destroyed) the following:
--two sets of my brother's Apple ear buds
--two sets of my boyfriend's Apple ear buds
--three sets of my own Apple ear buds
-- one Macbook power cord ($80+ to replace)
I went into the Apple store Friday to buy a new power cord. I said to the genius helping me, "I didn't even have that cord for a year. Ye know what happened to it?"
Genius said, "Your cat ate it?"
They're aware of the issue!
WTH secret ingredient is Apple using? My story is no different than the others: cat leaves all other cords alone; seeks out and destroys Apple cords.
The only thing I know for sure is that Apple makes money on cord replacements.

Ipod cable with USB & IEEE

I buy a ipod cable with together the 1394 & usb connect together, so is this mean it can use 1394 to transfer data to ipod?
thk a lot
The url show the cable that i buy.
http://hk.f2.page.auctions.yahoo.com/hk/auction/b3890652

so is this mean it can use 1394 to transfer data to ipod?
No, you cannot.
You can only transfer data using USB. There is no Firewire controller in the 5th Gen iPod, so even if you have the right cable, data transfer will still be impossible.
That cable can be used to charge the iPod via Firewire, but that's about all it can do with the firewire side of it.

Problems with compressing files with right hand click. it does not work.

Problems with compressing files with right hand click.
I am using the compress function in the Mac OS (File > Compress XX) from time to time. Today it does not work anymore. OS 10.5.6
I get a message: The content list cannot be created for compressing.
I tried it with files and folders and keep getting this message. Anybody any idea as to how to fix this

Thanks I love my macbook!!!!
I also got further problems such as copy-paste not working etc.
so I fixed it just this morning by running Applejack 1.5 and am back up running noticing your post.
thanks for helping though!

Is it possible to use a cable with two headphone jacks on either end and an electric guitar adapter to record in Garageband?

Hey everyone,
I got my Macbook Air (Mid 2013 model) last month and I want to record my acoustic-electric guitar on Garageband (which came with the Air).
I don't want to buy a guitar that has a USB. I have a cable with a 3.5 mm headphone jack on both ends like the one pictured here on this website http://www.bestdealaz.com/item.php?id=628 (i didn't buy it from this site though).
I connected a 6.3 mm guitar adapter (http://www.ebay.com/bhp/headphone-guitar-adapter) to this cable. Then I connected one end of the cable to my guitar and the other end to the Headphone/Microphone jack on the left side of the MBA.
I saw how other people were saying to go to System Preferences / Sound and then change audio output to audio input.
I can't do that. I tried.
Please help!
Thank you.

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

1/8" == 1/8" cable with right-angle ends?

Similar Messages

Maybe you are looking for