1/8 of a beat off??? when recording audio and click??? HELP

Okay so I upgraded to Logic Studio and I'm having this problem that basically has crushed my work flow... Here is the problem:
When I record new audio from my FirePod in to Logic Studio the recorded audio is approx. and 1/8 of a beat off??? It is really annoying me... Any ideas of what the problem could be? Please help if you can, thanks.
Bill K.

Thanks for the tips... but unfortunately all my settings seem to be in order??? Anything else I could try? I do record to an external 7200rpm firewire 800 drive and I have the FirePod using firewire 400... this set-up worked great with Logic 7.2???
Please help if you can

Similar Messages

  • Logic Pro when recording audio and midi takes, the regions sometimes become confused. The midi tracks line up with audio tracks.

    When recording midi and audio tracks simutaneously the midi tracks don't always line up with the software instrument channel. They may show up on the audio track. Sometimes they appear white instead of the normal green. Any suggestions?

    Hey there jlholm,
    It sounds like you are seeing some unexpected behavior when you are working on your project. I would use troubleshooting steps 6-10 from the following article named:
    Logic Pro X: Troubleshooting basics
    http://support.apple.com/kb/HT5859
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Premiere Pro CS5 when recording echos and reverbs- help pls?

    Just purchased Master Suite and when trying to record in Premiere Pro CS5 through headset set up or microphone, all good equipment, I get lots of echos and intense "reverb" I believe... tried changing settings and turning off speakers etc.. with no luck. Any suggestions would be appreciated. FYI, was using Camtasia and had no problems at all.

    Can you tell us all about the acoustics of your studio?
    Also, knowing the make/models of your mics, and how they are set up would be helpful.
    Do you have the output to the speakers active? I would turn this off.
    Do you get the same problems, in other software (per Jim's suggestion), without making any other changes?
    Good luck,
    Hunt

  • Recording audio and software tracks simultaneously ?

    recording audio and software tracks simultaneously ?
    I am recording a software piano instrument track and a vocal audio track in logic Pro X. Problem#1
    When the replace"X" button is selected,
    when recording audio and a software track simultaneously,
    I can hear the previously recorded instrument track that I am recording over.
    (very distracting)
    When recording a software instrument track alone (without simultaneously recording an audio track)
    The software/midi instrument track will record over and erase existing data and I will not hear the previously recorded track. (as it is suppose to do) Problem #2
    Both tracks are armed ready to record.
    If the software instrument track is not highlighted, it will not record.
    The audio track will record regardless of whether it is highlighted or not. Craig C.
    Calistro Music 

    Click record on the MIDI/Inst track.
    Shift click record on the audio track.
    Hit record

  • When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

    When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

    njordan wrote:
    I can't figure out how to get rid of the "click" sound before I send off the recording!
    drag the BottomRight edge of the region to the left, past the unwanted sound

  • When record audio I can`t see the graphical overview of the waveform.

    When record audio I can`t see the graphical overview of the waveform.

    In the Arrange Window at the bottom; click on Sample Editor:

  • Iphone 4 auto shut off when battery 20% and lower.

    My Iphone 4 auto shut off when battery 20% and lower. The phone is only 1.5 years old. Can I know why this happen?

    Most commom reason for this is faulty battery. You could try Restore with iTunes on computer, at end when prompted, Set Up iPhone as New. If still problem and you have AppleCare, take to Apple for resolution. If no coverage, make Genius reservation and take to Apple Store for quick free battery diagnostic testing.

  • High pitch noise when recording audio using internal mic

    The issue I am having is with the internal mic. When recording audio using quicktime or garageband.It is a high pitch noise that stays whether i am speaking or not. The fix i found was to lower the input volume of the mic in system preferences. However, this causes my voice to be recorded so low that audio is barely usable unless volume is all the way up. Looking around the web I found this gem:
    http://www.usingmac.com/2009/6/18/recording-speech-with-garageband-2009
    This help me get rid of the high pitch noise for Garageband. The noise still there for Quicktime. Any ideas on how I can keep the same mic input volume with out having to listen to the high pitch noise?
    Any help is appreciated.

    Did you do the usual stuff, such as reset PRAM?
    http://support.apple.com/kb/HT1379
    There are some sound settings in PRAM, although I think it's only for sound output.
    Also, as a test, I would create a new admin user account in System Preferences Accounts pane
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
    Log out and log in to the new account (do not use Fast User Switching). In the new account, try recording something using QuickTime, and note if this problem recurs. If it does not, you have eliminated a few possible causes, such as a problem with the overall system installation or a hardware issue, and isolated the problem to something in your normal user account.

  • When I point and click on any link I get a drop down window asking if I would like to open in new window etc.   How can I turn it off ?

    When I point and click on any link I get a drop down window asking if I would like to open in new window etc.   How can I turn it off ?

    Thank you the-edmeister.
    I downloaded the menu editor extension but I can't open it.
    Searching on the web for something to open it I get the message from the windows website:
    File Type: Unknown
    Description: Windows does not recognize this file type.
    Any suggestions?
    Thanks Steve Shmurak

  • I'm trying to record audio and video simultaneously using iMovie and an external mic and the computer is picking up the audio but when I replay the video there is no sound. Any ideas?

    Can't get iMovie to record audio and video at the same time using the built in cam and an external mic.

    iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
    You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
    (note: remember what you changed it from so you can change it back later, before you import another CD)
    Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

  • What is the preferred virus scan program for iphone? I believe that I have a virus. My phone will come on by itself and it appears to be recording audio. I have read about spyware/surveilance viruses that will record audio and take photos.

    What is the preferred virus scan program for iphone? I believe that I have a virus. My phone will come on by itself and it appears to be recording audio. I have read about spyware/surveilance viruses that will record audio and take photos.

    My phone is not jailbroken.  I don't know what you mean about hacked.   Maybe it is hacked?   This is what is happening: About three times over the past few months I've noticed that my phone while "off" will come on (light up) and the screen shows an arrow towards the bottom; an arrow such that you would see on various "players" in order to "play" video or audio, I've searched my phone and cannot find any app that produces this particular screen though. Once I pick up the phone when this screen myseriously appears out of nowhere and press anything, it goes away and goes to the standard "slider" front page to unlock the phone.

  • Recording Audio and Midi at the same time in Logic 7 Express Can it be done

    I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

    I am wondering if I can record audio and midi at the
    same time in Logic 7 Express. I am running my guitar
    thrugh a Roland GR 33, and a line out and using the
    GR 33 to trigger sounds in the Logic's synth section
    but cant seem to record all three tracks at once. If
    any one knows how let me know. Oh and I am running
    the GR Synth and Guitar into the Prosonus Fire Fox
    and have the GR 33 out midi to the Fire Box as well.
    So I guss the question is how do I sent up two audo
    tracks and one midi track to record in real time.
    Thanks Victor
    Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
    HL

  • TS1702 I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just give me a blank page.!!!! what is the solution for this.!!!!

    I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just gives me a blank page.!!!! I wouldn't able to know what app has to be updated, untill and unless i get check for each every app on the app store installed on my iphone... what is the solution for this.!!!! can any1 one help me out.!!!!

    Cc2528 wrote:
    The iTunes Store on my iPad is set up with all my music already. And at the very bottom it shows my apple Id username. The only place it shows the previous owners id is in the App Store...
    You can probably change the ID in the "iTunes and App stores" settings on the iPad....click on the wrong account ID , select sign out, then log in with your own ID, I have not done this but I think it works.....
    but I would be more inclined to to the factory reset and start afresh.

  • When i try to download the new itunes it says it downloaded but when i go and click on it my computer says it wasnt downloaded correctly

    when i try to download the new itunes it says it downloaded but when i go and click on it my computer says it wasnt downloaded correctly

    It depends on what iPhone you have.
    If it's an iPhone 4S or earlier, click here.
    If it's an iPhone 5, you need to buy a Mac OS X 10.6 DVD, and that requires an Intel Mac with at least 1GB RAM.
    (73384)

  • I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

    I have a Steinberg MI4 and a Roland Fantom X7, and am trying to use my Fantom in Logic to record audio. Need help setting it all up using MIDI cables. Please help !

    Encryption wouldn't matter except for Wifi.
    While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
    Tiger Requirements...
    To use Mac OS X 10.4 Tiger, your Macintosh needs:
        * A PowerPC G3, G4, or G5 processor
        * Built-in FireWire
        * At least 256 MB of RAM (I recommend 1GB minimum)
        * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
        * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools  (I recommend 20GB minimum)
    http://support.apple.com/kb/HT1514
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
    See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
    https://discussions.apple.com/message/15305521#15305521
    Or Ali Brown's great info on where/how to find/get Tiger...
    http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
    As far as Memory, that's sort of easy, find your eMac here...
    http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
    As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
    http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

Maybe you are looking for