1.8 update 40 rpm 32 bits Dependency error
hello,
jre-8u40-macosx-x64.dmg
jre-8u40-windows-i586.exe are OK
jre-8u40-linux-i586.rpm: md5: d03360a9192d26a71770206a4257b470
openSuse 12.4
Can not install files: Dependency error ,
while up31 no problem even after reinstallation.
I do not have 64-bits version to test jre-8u40-linux-x64.rpm.
Error message:
in French "La résolution des dépendances a échoué - Apper
Impossible de trouver une dépendance de paquetage"
translation: "Dependency resolution failed - Apper
Can not find a package dependency "
Details > > nothing provides /usr/sbin/alternatives needed bye jre1.8_40-fcs.i586
A+
hello,
only with rpm,
it's OK on Ubuntu jre-8u40-linux-i586.tar.gz (md5sum: b22953df20789fc199877ad7d615d51e)
it's the same error with 64 bits.
jre-8u40-linux-x64.rpm (md5sum: 1802527c440523d6d9990cb8477593ea)
version openSuse 12.3 (Sorry but I have not updated 13.1)
A+
Similar Messages
-
Installer Problem for LW / CVI SP1 on Windows 7 64 bit. Error 1303 for NI Update Sevice 2.0
The installer stop partway through with the following box
NI Update Service 2.0:
Error 1303. The installer hsd insufficient privileges to access this directory:
C:\Programs Files\(x86)\ National Instrument\Shared\Update Service. The
installation cannot continue. Log as administrator or contact your system administrator.
Allowed options are "Retry" and "Cancel".
Rety does nto work.
Logged in with admin rights. Also UAC is triggered for beginning of install.
Several other NI products installed including LV 10, LV10RT, CVI RT and many other (academic SSP).
Thanks in advance. Will try a reboot and reinstall but want to post with this error first.
Solved!
Go to Solution.Blakney,
Thanks for your post - I don't think it's a false alarm to receive an error message! Did I understood you correctly that you ran the installer as administrator and still got the message of insufficient privileges?
By the way, what would be the preferred procedure: first de-install CVI2010 and then install SP1 or directly install SP1?
Wolfgang -
Missing dependency error while installing kernel-2.6.32-358.el6.x86_64 and yum-utils package
Hi Experts,
I'm not able to install the kernel in Oracle Linux using "Yum install". I'm getting error's while installing Kernel. The Kernel version is 2.6.32-358.el6.x86_64 (in the linux CD of virtual box) Can you please guide me how to proceed further.
I used the commands below :
wget http://public-yum.oracle.com/public-yum-ol6.repo
yum install kernel-2.6.32-358.el6.x86_64
I'm getting so many errors saying "Error Missing Dependency libpq.so.4() 64bit" Error missing dependency libmysqlclient.so.15()64 bit
Please find screenshot below : http://imageshack.com/a/img30/33/kp5z.jpg
I searched through the net and tried using "yum clean all" and yum update etc.. but the problem is not resolved...
Please note I booted from a linux Oracle linux 6 bootable CD and trying to install Oracle Linux 6 kernel on my machine..
I tried installing "yum-utils" package too using the below command, but that too failed giving missing dependency errors..
Yum install yum-utils
I dont' know much about linux and stuck with the issues above for more than 30 days now... please help...
Regards JagsYou cannot use the yum utility to do a major version upgrade, such as upgrading from Oracle Linux 5 to Oracle Linux 6. Kernel version 2.6.32-358.el6 is the RHCK kernel and requires Oracle Linux 6. So if your attempt was to install a driver that works only for the Red Hat Enterprise Linux 6 kernel, you will have to upgrade the OS first. For this you must start from the OL6 installation DVD, but upgrading between major release versions is not officially supported. You can however upgrade to the latest Oracle UEK kernel, by enabling the appropriate channel in the yum repository configuration file.
-
Dear All,
1. I am using Oracle 9iR2 Standard Edition on RedHat9
2. I installed only database server without client
3. I complied php-4.2.2-src.rpm with parameter
--with-oci8=shared,$ORACLE_HOME
4. I configured ORACLE_HOME, ORACLE_SID in /etc/profile
5. After compilation I got php-oci8-4.2.2.rpm
6. After updating PHP I got --with-oci8 parameter in
phpconf()
7. When trying to install php-oci rpm I got dependancy
error libclntsh.so required.
8. I searched this file and found in $ORACLE_HOME/lib
9. I tried to install with --nodeps flag, but the end
result is getting error in oci_logon
10. I edit /etc/ld.so.conf with $ORACLE_HOME/lib and
run ldconfig, still getting libclntsh.so dependancy
error
Will anybody help me to solve the above problem or provide me any other solution to connect oracle and php
Thanks in Advance
Yours
PrashantI've never tried using the RPMs on Linux. There are instuctions
on installing the Linux/Apache/Oracle combination at:
http://otn.oracle.com/php/apache/inst_php_apache_linux.html
(This link is 404'ing for me at the moment. Check OTN's
Open Source Development resource center in case the link
changes)
-- CJ -
Creative Cloud updates fail due to error U43M1D212
Problem:
Creative Cloud desktop is installed. Login to Creative Cloud works. Applications can be installed BUT applications CANNOT be updated. Error message: "Unable to reach Adobe servers"
System:
Windows 7 Ultimate, 64-bit
What I've tried so far:
1. Uninstalled everything, ran CC Cleaner Tool, restarted computer, re-installed.
2. Disabled Windows Firewall and Microsoft Security Essentials. Rebooted router. - This is a home network, not a managed network.
3. Checked everything this page tells me to do: Sign in, activation, or connection errors | CC, CS6, CS5.5
- Internet connection is fine
- Secure sites work
- Hosts file is clean
- GlobalSign Root CA certificate is OK, just to be sure I downloaded a new copy and reinstalled the certificate
4. Checked aamu.log in the Users folder. It shows error code string U43M1D212 as the reason for failed update download.
Please help.Update to this problem which still has not been resolved.
I wiped the computer clean and started with a fresh installation of Windows, a clean image direct from Microsoft without manufacturer bloatware. Disabled Windows firewall, only installed Creative Cloud desktop. Again, I can sign into Creative Cloud, download and install apps, but still not update them.
Proceeded to install everything else I need on this computer, and everything works without problems. I know it's not the computer, my internet connection, cables, DNS or anything else I can do anything about. Adobe needs to fix this.
Below is a part of the aamu.log file that shows the problem:
05/18/14 12:35:05:711 | [INFO] | | UPDATER | CORE | | | | 4776 | ThreadDownloadUpdates:: Initializing Download
05/18/14 12:35:05:712 | [INFO] | | UPDATER | CORE | | | | 4776 | GDEDownloader:: GDEInitialize Successful
05/18/14 12:35:05:719 | [INFO] | | UPDATER | CORE | | | | 4776 | GDEDownloader:: GDEInitDownloader Successful
05/18/14 12:35:05:805 | [INFO] | | UPDATER | CORE | | | | 4776 | ThreadDownloadUpdates:: GDEGetFileSize UnSuccessful
05/18/14 12:35:05:805 | [INFO] | | UPDATER | CORE | | | | 4776 | ThreadDownloadUpdates:: ERROR: No Network
05/18/14 12:35:05:812 | [INFO] | | UPDATER | CORE | | | | 4776 | GDEDownloader:: GDE Closed
05/18/14 12:35:05:812 | [INFO] | | UPDATER | CORE | | | | 4776 | ThreadDownloadUpdates:: ERROR: Download Stopped
05/18/14 12:35:06:674 | [INFO] | | UPDATER | CORE | | | | 4728 | SetDownloadUpdatesInProgress : = 0
05/18/14 12:35:06:674 | [INFO] | | UPDATER | CORE | | | | 4728 | SetDownloadUpdatesInProgress : = 0
05/18/14 12:35:06:674 | [INFO] | | UPDATER | CORE | | | | 4728 | UCGetprogress : Updates download returning state for reffId = AdobeCSXSExtensions4-4/4.0.2
05/18/14 12:35:06:674 | [INFO] | | UPDATER | CORE | | | | 4728 | UCGetprogress : Updates download returning state = 43
05/18/14 12:35:06:674 | [INFO] | | UPDATER | CORE | | | | 4728 | UCGetprogress : Updates download returning outError = 212
05/18/14 12:35:06:674 | [INFO] | | UPDATER | CORE | | | | 4728 | UCGetprogress : Updates download returning percent = 0
05/18/14 12:35:06:674 | [INFO] | | UPDATER | CORE | | | | 4728 | UCGetprogress : Updates download returning unique error code string = U43M1D212 -
Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem
I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users. -
When downloading the new 10.7 update for itunes, an error message saying that there is an error writing to file, verify that you have access to this file comes up... what is this??
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Windows 7 64-bit instal error on new ST9750420AS Momentus HD in HP Envy 15
windows 7 64-bit installation error on brand new ST9750420AS Momentus 3Gb/s 750-GB Hard Drive in HP Envy 15
I installed a brand new ST9750420AS Momentus 3Gb/s 750-GB Hard Drive in my HP Envy 15 laptop, and I was getting an error in the last installation step of Windows 7, 64-bit, ultimate, indicating that Windows could not support or be installed on the computer hardware. It turns out that the drivers for the new internal hard drive, need to be installed/loaded during the initial windows install.
the drivers that ended up working are available from intel at:
RST Driver Files v.10.1, 64-bit
the steps that are requires are:
1) download the f6flpy-x64.zip file above, and unzip to a usb pen-drive
2) when installing windows 7, in the configure option of the volumes, even if windows appears to recognize the drive, it is recommended to delete all existing volumes (Advanced options), and then LOAD DRIVER, and BROWSE to the usb pen-drive, while indicating to only list drivers that are compatible with the hardeware. here is quick list of similar steps with diagrams.
3) in this case the compatible driver name is "INTEL MOBILE EXPRESS CHIPSET SATA RAID CONTROLLER¨
4) continue to configure volumes, and installing windows 7,
5) everything should work fine.Hi Srizzle, I have done some research for you and I have found a updated driver that is designed to resolve the issue of No sound from head phones or from external speakers. Please click on the link to get to the driver down load page.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3970...
If this does NOT resolve the issue, please write back and I will be happy to do more research on this issue for you.
Thanks in advance
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later.
Dreamweaver CS5 11.0.4 Updater
There was an error downloading this update. Please quit and try again later.
this happens continual when I try to update minor increments for my CS5 Master collection no matter what application update I try.
No help available to resolve this problem...
William Bell.thank you,
I downloaded updates and installed manually, had to mess around a bit.
Start the updater from the program first, then install from the download.
Also, moved plugins that are for Premier from common plugins directory,
to the Premier plugins directory. Stopped the error I got launching After Effects
that said to reinstall the plugins.
Cheers!
W. -
"Unable to update local resource group" error
Hello,
I'm having a problem updating one of my local resource groups in RD Gateway Manager.
We're on 2008 R2 SP1, and have a gateway in between us and another company. When a user needs to access their computer in the other company, we add the machine to the local group, and the account the AD RAP group, it works fine.
However, every couple of weeks, it will not allow me to update the local resource group for computers. I receive the error "WMI Failure: Unable to update local resource group" ..and apparently google cannot find another instance of this error happening -
no results at all - very odd. So the normal fix is to just recreate the RAP.xml file, then add the machines in again, but this is not a good enough fix long term, plus it misses the machines that are switch off when i recreate.
Also - this will be logged in eventvwr TerminalServices-Gateway
"The resource group "MY GROUP NAME" could not be updated. The following error occurred: "23106". To resolve this issue, ensure that you have configured resource group settings correctly and set the correct value and permissions for the RAP.xml file and the
RAPStore registry key."
Google also cannot find anything for that error, OR that 23106 error code - I cannot get results no matter what I do. It cannot be permissions as I've checked them, and it works for a bit. I've ran the WMI diagnostics, and they're fine, no different to any
other server in the environment.
I've also checked these forums and there is nothing on there. Does anyone know the relevance of that error code, or where I can check it out?
Cheers,
JonI can confirm ..MPIN..'s solution fixes it.
I had the exact same problem; I'd recently added a new server, and stopped the old server before decomissioning. Adding the new serer to the TS RAP policy server didn't work and generated the OP's error.
I removed the old server name (which was not pingable) and the group COULD be updated.
Really crappy error handling - this is a defect and should be fixed. A proper error would say "Not all machines in this group are valid, please remove the invalid entries" OR simply allow 'ok' without double checking (after all, the names are checked
when adding).
So often we accept shoddy software by proposing work arounds as 'the fix'. The actual fix is to fix the software to be more descriptive and/or handle errors more gracefully.
== John == -
Problem updating Photoshop elements 13 error code U44M1I210
Every time I try to update PSE 13 I get this message:
Adobe Photoshop Elements 13.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
I am running a windows 7 64 bit system. I have tried many times to get PSE to update, I have tried other suggestions like updating from a project page. I have tried disabling my firewall and virus protection software. I have tried uninstalling and reinstalling the entire program. Nothing works!! Any solutions out there?Hi alessandrothei,
Please go through this kb article.
http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
regards,
Abhijit -
Install Mac OS X lion fine without any issue
I'm trying to dual boot Lion and Wind 7 on different HD but when I ran the bootcamp assistance for software update I get an error that it can't download from the server.
I also try without downloading the software and do the installation but it fail. It seem that this bootcamp is giving problem so I revert back to SN leopard and it does the same. Why can't the bootcamp assistance update the software, is it something that I did wrong or my system is not supporting dual booting.
Here is my spec
Apple Mac Pro "Quad Core" 2.66
Identifiers: Mac Pro - MA356LL/A - MacPro1,1* - A1186MacPro1,1 has EFI32 and does not support Windows 7 very well, can't boot 64-bit, can't use all your RAM.
There have always been trouble and issues, ways around those, but a big PITA too.
Select CD-ROM Boot
Select CD-ROM Boot Error Apple
Nothing to do with Lion actually. Other than downloading drivers from Apple servers has been mostly hit or miss, with miss being 90%.
I have rebuned the DVD (make a new ISO image using Imgburn etc) but now I just install Windows on PC then move the drive to the Mac. A lot easier.
Without 64-bit you can't use more than 1.9GB RAM. And you need Windows 7 Pro to use both processors. -
i tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?
Hello bajura007,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Update to version 26 error msg - Win7Pro
Received the prompt to update Firefox version 25 to Firefox version 26. Clicked on Update Now and successfully downloaded the update. When I attempted to run the update, I get the error message, "The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher." I have the 64-bit version of Windows 7 Pro. I tried performing the installation with all other applications closed. I tried the manual update. I tried updating from the About menu. None of it works. Has anyone solved this issue?
Hello,
First unistall the other version Firefox:
*[https://support.mozilla.org/en-US/kb/uninstall-firefox-from-your-computer Unistall Firefox]
After, Install Firefox:
*[https://support.mozilla.org/en-US/kb/install-firefox-windows?esab=a&s=install+firefox&r=0&as=s Install Firefox]
If you dont get, please tell us!!! -
Skype errors after update: skype: symbol lookup error
The entire error is :
skype: symbol lookup error: /usr/lib32/libXi.so: undefined symbol: _XGetRequest
While trying to update following were the errors.
resolving dependencies...
warning: cannot resolve "xcb-proto>=1.7", a dependency of "lib32-libxcb"
warning: cannot resolve "xcb-proto>=1.7", a dependency of "lib32-libxcb"
:: The following packages cannot be upgraded due to unresolvable dependencies:
lib32-libx11 lib32-libxcb
Do you want to skip the above packages for this upgrade? [y/N] y
Any help will be much appreciated as I cant seem to establish what is wrong here.Thanks a lot wonder. Just enabled testing and everything is fine. You are brilliant.
Maybe you are looking for
-
SSRS Expression Month at a glance
I have a report that I am trying to regress the payment sums out month by month. I know how to do this in SQL, but no idea in SSRS. Below is what I would like the table to look like. Year Month Total Payme
-
InfoPackage: ABAP Selection or alternative selection from file
Hi I have a file containing the bill number of 84 documents that I want to load. I have to load throug different layer (from one ODS to another ODS to another ODS to a Cube etc.) and therefore I would like to avoid to insert these document number in
-
I synced my Iphone before downloading the newest update and lost all my purchased ringtones. How do I get them back and what do I do differently next time so it doesn't happen again?
-
Inspection plan : Dependent characteristics specifications
Hi all ; We want to list our inspection plans with a alv report. We use tables MAPL - PLKO - PLMK - PLPO - PLMW . But , we can not find dependent characteristics in tables , when i click f1 , i get belowed result. It is a structure. How can i get plm
-
Default Billing Type in Billing Plan
Hi, How do I change the default billing type in my billing plan? Thanks!