1.9 Roll out

Will this roll out allow for sharing dvr media between on HD DVR to another HD DVR?

Technically the limit is 7... which is a function of the home network technology we use called MoCA... It turns the coax into an IP network....

Similar Messages

Will current HD DVRs have ext. drive capability when 1.9 rolls out or ONLY the new 500 GB DVR box?

Got the email about the $40 upgrade to the 500 GB Motorola box. I realize that once 1.9 is FINALLY rolled out, the box will have eSATA capability to tack on a supplemental HD. My question is, can I just not pay their $40 for the new box and instead wait until 1.9 is rolled out, and then be able to use the currently useless USB port on my current silver Motorola 160 GB HD box to hook up a 1TB drive that I can get for less than the $40 upgrade fee?
Are they are any OTHER advantages to the new box over the existing ones (feature and capability wise...I don't care about recycled materials, less energy usage, etc)?

All the 7xxx series DVRs will support an external drive. There are no plans to utilize the USB port - too slow to support MRDVR.
The 7232 has more memory (not just the disk) and is smaller, black, and supposed to use less energy (I know you said you don't care, but I mention it anyway).
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Rolling out ADE to Open Access Computers in libraries

(In the UK). In Plymouth we are using Secure Electronic Delivery as the default to deliver access to documents provided by the British Library. Internet Explorer 7 (and this is also known with Firefox and other browsers) causes an ebook reader detection error as part of the downloading process "Downloading this eBook requires Adobe Acrobat eBook Reader version 2.2 or later to be installed on your computer" (even though all our computers are on Reader 7.0.9). The page then provides a link to download the latest version. The problem is that, despite being told to ignore the link and scroll to the 'download your ebooks' link further down the screen, many users are clicking the update link and ending up with Adobe Reader 8 without ADE, or a misfunctioning ADE because they do not have administrator rights, or a screen which hangs and does nothing, or an ADE that will not allow them to print. In open access areas all computers are locked to a standard 'frozen' image which is restored after each log-out. Users, therefore, are unable to save any changes which means that they also have to repeat the steps every time they want to download an SED everytime they log-in. (Yes, because of 'easy activation', we also have to make it clear to these users that it is 'download and then print' or there is no further access to the document, despite a 14day access rule; and no-use of memory sticks too!). We would love to be able to maintain our ability to standardise these computers on the latest version of the Reader software, but are unable to do so because we do not have the manpower to manually install ADE on each computer (over 2,500!) to make it part of the 'locked' image. We know the eBook Reader detection error is most probably caused by the underlying software technology difference between IE7 and Adobe 7 and would hope that installing Adobe Reader 8 and ADE would restore the seamless process that we had long established using the Reader 7 series!
Could not Adobe please consider a means by which, say ADE 1.5, could be packaged and rolled-out centrally? Then also consider doing the same for future releases - it would really make life easier for everyone. If not we will have to remain on Reader 7.0.9 and users will 'suffer' as the technology becomes more and more obsolete, and suffers from more and more problems caused by a widening gap in software technologies. We understand the idea behind the decision to make ADE an IRA (internet rich application) but the growing use of DRM and the need to delivery these documents within closed environments, to people who cannot be given full access permissions, means that there should also be a concurrent method to allow updating in such situations. Our 'problem' rate for SED is beginning to climb (from under 3% (based on 16,000 transactions) before the release of Adobe 8, to 6% afterwards (based on 7,000 transactions). Before the release of 8, 70% of the problems were because people didn't read instructions we provided; after 8's release, 70% of the problems are caused by the technologies (eBook detection; downloading Reader 8 and not ADE; ADE not functioning due to local permissions etc etc). These seriously affect the value of the service and also the perception people have of the service and of Adobe products (eg: the IE7 error states "Adobe eBook Reader not detected" so, even though your product may not be to blame for the users' inability to get to their document, they blame Adobe Reader, especially if they know they have Reader 7 installed!
My apologies for a long post but I consider it an important issue as well as it being important to lay out some of the logic and arguement as to why.
Graham

Thank you very much for taking the time to write this long and accurate post. We are very much aware of this issue and are working as hard as we can to resolve this. It might not be possible to squeeze it into 1.5, but we will get to it as soon as we possibly can.
Can you submit a support incident at www.adobe.com/support/digitaleditions/ so we can try and resolve the immediate problem (incorrect detection and misleading message)? We can also discuss offline how your organization and our can work together to resolve the larger problem. Thanks.

BlackBerry 10.2 OS Begins Roll Out for the Z10

Read more here:
BlackBerry 10.2 OS Begins Roll Out
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

The unlocked part really doesn't come into play.
It's controlled by the SIM card in the device, and by removing the SIM card you might be able to upgrade, per the directions here:
How to Reload your Blackberry10 OS
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

BlackBerry 10.2 OS Begins Roll Out for the Q5

Read more here:
BlackBerry 10.2 OS Begins Roll Out
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

The unlocked part really doesn't come into play.
It's controlled by the SIM card in the device, and by removing the SIM card you might be able to upgrade, per the directions here:
How to Reload your Blackberry10 OS
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

BlackBerry 10.2 OS Begins Roll Out, for the Q10

Read more here:
BlackBerry 10.2 OS Begins Roll Out
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

The unlocked part really doesn't come into play.
It's controlled by the SIM card in the device, and by removing the SIM card you might be able to upgrade, per the directions here:
How to Reload your Blackberry10 OS
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

BlackBerry 10.2 OS Begins Roll Out

BlackBerry 10.2 OS Begins Roll Out — New Reasons to Love your BlackBerry 10 Smartphone, Big and Smal
From the Inside BlackBerry blog:
BlackBerry 10.2 OS introduces new features like BlackBerry Priority Hub, BlackBerry Natural Sound, and BBM now in any app that will help you be more productive and stay better connected when it counts. Plus, with hundreds of new refinements, BlackBerry 10.2 makes the things you do every day faster and easier. Here are just some of the new features you’re going to love in BlackBerry 10.2:
BlackBerry 10.2 Highlights:
Priority Hub
Keep your important conversations closer than ever with the new Priority Hub. Always at your fingertips, Priority Hub learns what conversations are most important to you and automatically puts those messages at the top of your inbox, helping you to stay focused on the critical items. On top of that, the new attachment view helps you organize files and documents across your messaging accounts and within specific message threads.
BBM Video with Natural Sound
BBM Video has always allowed you to have a live face-to-face conversation with anyone, anywhere. Now, with Natural Sound, BBM Video and Voice conversations between BlackBerry 10 smartphones sound more natural and realistic. It’s the next best thing to being in the same room. We’re able to accomplish this because BlackBerry Natural Sound captures a wider sound spectrum, so you can hear subtle nuances that are lost in most cellular calls.
Instant Previews of BBM, SMS and Email from any app
Stay in the flow. BBM, SMS and E-mail messages now find you no matter what you are doing on your BlackBerry. See email, BBM and SMS message previews appear in any app – you can even respond to your BBM or SMS messages in any app or go to the BlackBerry Hub with a single swipe to respond to your email. Perfect for keeping the conversation going while you browse the web, watch a video, or use other apps. Of course, you can tailor these notifications to the way you work to ensure you’re only notified as much as you want to be.
BlackBerry Keyboard
The smartphone keyboard that knows your next move just got even smarter. With personalized next word suggestion, auto-correction, and the distinctive BlackBerry keyboard layout, we’ve built this keyboard to help you have conversations with speed and accuracy. And on the BlackBerry Z10 and BlackBerry Z30, improved audio feedback with distinct tones for specific keys like backspace, and shift helps you type more confidently because you’ll have more reassurance you’ve hit the right key.
Copy and Paste Enhancements
Copy and paste just got easier. Not only does BlackBerry 10.2 offer more precise cursor control, text selection is now easier. Once you select text, a pop up menu gives you editing options and direct sharing with BBM, Facebook and Twitter – so you can quickly copy, paste and share
Faster, Easier Sharing
BlackBerry 10.2 learns how you share and who you share with, helping you reduce the number of steps and amount of time it takes to get your files, photos, or documents to where they need to go. Touching “share” in any app provides suggestions on who and how to share your files based on how you’ve shared in the past, and the feature only gets smarter the more you use it.
Lock Screen Notifications
When the red light on your BlackBerry 10 smartphone is flashing, you don’t have to unlock the phone to see your message. Notifications on the lock screen now let you take a peek at the latest email, text, BBM, or notification to see if that’s the message you’ve been waiting for or one that can wait a while. You can customize which accounts appear on the lock screen and scroll over the icons to display the sender and subject line.
Reply Now
Reply Now lets you respond to incoming phone calls, even when it’s not a good time to answer the phone. Easily send a response through BBM, SMS or email – choose from a list of standard automated responses or respond with a personalized note. Perfect for ensuring that important contacts are always given your attention.
Calendar Enhancements
BlackBerry Calendar now comes with an ‘I’m running late’ function so you can instantly let meeting participants know if you’ll be late. You can even specify a new time in your notification. And, with a redesigned interface that makes adding an event easier, managing your time is simple.
BlackBerry 10.2 OS gives you a lot of new reasons to love your BlackBerry 10 smartphone, and we haven’t even mentioned the updates to Docs to Go, a new BlackBerry Hub icon, camera enhancements—but the best way to experience all BlackBerry 10.2 has to offer is to try it for yourself. Remember to back up before updating
BlackBerry OS 10.2 is expected to start rolling out in the following regions pending carrier availability:
Africa: Starting this week
Asia Pacific: Starting this week
Canada: Starting this week
Europe: Starting this week
Latin America: Starting in November
Middle East: Starting this week
US: Starting this winter
How to update to BlackBerry v10.2
When the update becomes available on your carrier, here’s how you can update for free:
To update your BlackBerry smartphone to BlackBerry 10.2 software, look for the alert in the notifications section of the BlackBerry Hub. You can also check for software updates through the System Settings menu and selecting Software Updates. The download will happen in the background, so your information remains safe and you can continue to use your smartphone as it downloads. As always, we recommend you make a current backup of your BlackBerry 10 smartphone. For more information on how to update your BlackBerry 10 smartphone, visit http://www.blackberry.com/update
Be sure to let us know what you think in the comments below.
*Not all carriers will be releasing this update.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

The unlocked part really doesn't come into play.
It's controlled by the SIM card in the device, and by removing the SIM card you might be able to upgrade, per the directions here:
How to Reload your Blackberry10 OS
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Issue during Template roll-out during FIT-GAT session

Hello SD Guru,
Hope you all are doing fine these days...!!!
I am facing a typical challenging situation in my Template roll-out project based out of Europe and would need some expertise advice to tackle the current situation. As a matter of fact, we are using a Development system and landscape is :- DXX --> QXX --> PXX for major Consumer Products and Goods based client, The support team works for any kind of bug fixing and small CR on this landscape i.e DXX, Development for the earlier roll-out exist in the current landscape set-up with template version 1.0. Now since we are having changes in business operating model, we are having template based roll-out in the same landscape and the new template would be version 2.0.
Could anyone suggest what should be the mitigation plan when Support team, Template version 1.0 and Template version 2.0 would be co-existing in the same environment ?
Once the realization of the template version 2 is done and after that we get any specific bugs....where do we need to troubleshoot ? Is it template version 1.0 or template 2.0. The best line of thought could be done in terms of small example...lets say Have a custom program created due to template version 1.0 for creation of Rush order and Consignment sales based on business critical field maintained in a custom table, now due to some requirement gathered during current roll-out and this functionality is extended to include free of change sales with VAT. Hence functionality (sales order create program with custom table) come to template 2.0.
If you have ever come across this kind of situation, please share your inputs or any kind valuable approach would be appreciated...!
Thanks,
Sarthak

Hi Yandamuri,
(Incorrect account determination: IN02 V1 100501) - Please check whether account determination is missing for this account in OB09.
Enter account number with a maximum of 10 characters -
This is related to the number of digits defined in the Transaaction code OBD4 Please see the OSS Note 548947 and 907032 is clearly stating about this error.
Posting for general ledger account 100501 amount 5,880.00- set in batch input - Check the document type related to batch input session.
Please contact SAP India if necessary.
Warm regards,
Murukan Arunachalam

Roll out of PC suite with SMS 3.0

Hello,
Our company wants to roll out Nokia PC Suite 6.82.22 thru SMS 3.0.
When we do that the ContentCopier backup is placed in the Default User profile. Rebooting or logging in as another user after install doesn't change that.
When we install the MSI by hand it is placed in the current user profile. When we log in as another user and make a backup it is placed in that users profile (as it should).
I didn't find any properties or custom actions in the MSI and no registry keys or .ini files I could change to change the behaviour of the SMS installation.
I understand the Default User profile is taken because the SMS installation user has no profile but I don't understand why this isn't corrected after a reboot/logon.
Do you have a solution for us? Installation by hand isn't an option anymore after this migration.
Kind regards,
Marcel Bruinsma

Thanks for your reply.
Not yet but before I start spending a lot of time on that I would like a Nokia rep. to tell me if they know about this and if they have a solution.
I can try to repackage the vendor MSI but somehow I don't think this will solve my problem.
I also mailed the message to the Dutch help desk but no sign of life from there until now.Message Edited by zhubajie on 19-Sep-200701:49 PM

Questions in Roll-out projects

Hi Gurus,
Please support me.
In rollout project
1. Can i use the same types of equipment category , object types, Functional location types, Catalogs , codes, Classes and classification..etc as same as the reference system.?..How?
2. The number ranging for the equipment are external in the reference system ..can i give internal numbering.?
3.If the equipments are same in the both the projects, can i copy the tak list, maint plans..If yes..How.?
4. Please provide me information on Classes and classification how they should be done.
Thanks for your support in advance

1. Can i use the same types of equipment category , object types, Functional location types, Catalogs , codes, Classes and classification..etc as same as the reference system.?..How?
Mentioned details are SAP client (i.e., DEV, QAS) specific settings. So, you can use these for roll out projects.
2. The number ranging for the equipment are external in the reference system ..can i give internal numbering.?
This is Business requirement how they want to have / see the equipment in SAP. You can go with external number range or internal number range with external number in Technical identification field in equipment master.
3.If the equipments are same in the both the projects, can i copy the tak list, maint plans..If yes..How.?
Task lists can be copied from existing one, but not maintenance plans.
4. Please provide me information on Classes and classification how they should be done.
This is very high level question which can't be addressed here. Better open a new thread or search in forum.

Roll out for new plant need some informations

Hi,
We are going to roll out for our 2nd plant. So I need your help.
I am explaining the scenario,
Current scenario is: we have two manufacturing plants (ex:-one in noida and another in gurgaon) and in both plants we have six product line (in A plant=3, in B plant=3).
For both plants we are using one Company code (1000). and we are not using the business area.
But now the problem is this, that management wants separate reporting (P&l statement and Balance sheet) Plant wise and Product wise.
We decide to create a separate co- code for 2nd plant and six business area for product lines.
(In this regards I need your suggestions that how can we define the enterprise structure)
Please tell me
1. what new configurations we need to be done for new co-code?
2. In which areas business area will be affected and how and where we will assign the business area?
3. As we are doing transaction in sap since last year and we are doing this roll out in mid of 2008 so what will be the impact on the business.
4. How we will transfer the transactional data from one co-code to another, because data of both plants lies in previous co-code(1000).
Data like:- A. Transfer of General ledger balances
          B. Transfer of open line items of General ledgers
          C. Transfer of asset and accumulated depreciation from one co code to another.
          D. Controlling transfer postings.
          E. Customer / Vendor open items and balances transfer posting. Etc
If someone knew about something more to be taken care of, please guide so that we can successfully complete the roll out.
Please advice me, its urgent. if any one can give me his mobile to make me understood i can call to him .
Thanks and regards
Kuldeep singh

if they want to a seperate P&L and B/S the why dont you make them as profit centers where you can take a P&L n B/S. at this level

Sales org roll out doubt

Dear Peers,
My scenario: CRM roll out for DE.
first CRM was implmented in US and the rollout is for DE. In R3 customer no:10 has assigned to 4 diff sales org included US and DE. Now i started the Initial load for the DE customers from R3 to CRM and the error i got is SYSFAIL and the detail is "Customer 10 is already assigned to a Business partner" and BUPA_MW_EXCHANGE103.
in filter settings R3AC1 i am maintinaing KNVV and KNVP tables.
my question is if do initial load for roll out , only aditional information i.e. Sales org details can be updated for the already existing customer in CRM?
i.e.in my scenario the customer 10 is already in CRM now only the DE sales org has to update for the customer 10. in future if we go for rollout of another country that sales org details has to be updated to the existing CRM customer will it be possible?
Thanks,
K
Edited by: kesava9 on Dec 13, 2010 2:52 PM

Hi,
Normally we only do Initial download once when we set up the system for the first time. after that all changes should be downloaded automatically needless of the sales org.
Now I would recommend to do a request download instead of an initial download, since updates for that customer will be updated automatically for each rollout scenario if the customer is already there. if the customer is not there it would create a customer and updates the sales org details as well.
Don't know if i answer your question correctly.
Hopeit helps.
Regards
Sidd

Explain about Roll Out Project

hi
Please explain about roll out project
thanks
ganesh

Hi,
Roll -out Project:
Extending the business functionality from corporate office to its branch office. Example: You have main office in USA and you implemented SAP. Also you have branch in India and want to implement in India. When implementing SAP in India office( having same company in corporate level and assigning a company code for India to the same company), you can say it's a roll out project.
SAP Upgrade:
SAP Upgrade is nothing but upgrading the software with a superior version which has got more advantages when compared to the earlier version. Consultants are to go through transactions SPAU/SPDD to compare the old and new version of the change and finally need to activate the relevant one. Some times might need to work on SAP notes.
Implementation Project:
SAP Implementation is the whole of processes that defines a complete method to
implement SAP software in an organization from Legacy System. It is based on best practices and case studies from various sources and presents a collection of processes and products that make up a complete implementation method to allow any organization to plan ,redesign and execute the implementation of SAP (ERP) software. The SAP implementation process is made up out of Five main phases, i.e. the project preparation where a vision of the future-state of the SAP solution is being created, a sizing and blueprinting phase where the solution stack is created and training is being performed, a functional development phase and finally a final preparation phase, when the last tests are being performed before the actual go live & then support.
http://www.sap-img.com/sap-implementation.htm
http://www.erpgenie.com/basis/upgrade.htm
http://help.sap.com/saphelp_sm32/helpdata/en/bc/b3fd40ce3df123e10000000a155106/content.htm
http://www.open.hr/hiz/hrusko/RolloutPresCASE3.pps#268,15,Project Assumption
http://www.slideshare.net/srinatha/sap-implementation-life-cycle-complete-process/
Regards,
Kiran

Belle Refresh Roll Out...

I know the Belle firmware update/refresh is being rolled out gradually, but does anyone know when the rollout is due to be completed?
I would expect by now that all Belle phones should have received the update but I haven't received anything yet.
I have also read about some new homescreen widgets for Belle users who have not yet received the Belle Firmware update, again I haven't received these.
Can anyone from Nokia (or elsewhere) tellme when I might receive one or both of thses updates please?
My phone is an N8 on the 02 network in the UK
Software version: 111.030.0609
Version Date: 2011-11-26
Custom Version: 111.030.0609.210.11
Custom Version Date: 2011-01-16

Hi Arkwright,
Sounds like if there will be a firmware update is being released for your product code, then it may be delayed as it hasn't been approved / worked on / tested by your network operator, O2. Your first point of call would be to contact O2 and ask if the Belle Refresh update will be made available for your N8. Failing that, it is best to contact your local Nokia Care point to ask about the availability of the update for your device.
http://nokia.com/support

Jelly Bean Rolling out in Phases To the Original Razr / Razr Maxx

I usually don't like to Start new thread's unless there is a Definite need and this one is: As it says above Jelly Bean is Going out in Phases! Owners Go on your Devices to About Phone and See if the Update is There if so Make sure you have a Fully Charged Battery and it's a Good thing to be Hooked to a Wi-Fi! If your not the closer you are to a Tower the Better to get the best Quality signal you can the reason it's a big Download .. Good Luck!
Written by B33
http://www.androidcentral.com/motorola-makes-razrrazr-maxx-jelly-bean-ota-official
http://www.droid-life.com/2013/03/07/motorola-jelly-bean-android-4-1-2-now-rolling-out-to-droid-razr-and-razr-maxx-in-stages/
Message was edited by: B33 .

To Go with the Roll out i Found the New User Manual Update For Jelly Bean For the Razr / Razr Maxx and i also included the New Updated Help Page from Motorola..
https://motorola-global-portal.custhelp.com/app/product_page/faqs/p/30,6720,8417
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/92940/p/30,6720,8417
https://motorola-global-portal.custhelp.com/ci/fattach/get/601071/1363036376/redirect/1/filename/DroidRAZR_RAZRMAXX_UG_JB_68017342001A.pdf
Be Sure to look at all of Features on this Page to Get your self Adjusted to the New Change Over. b33

Rolling out SSL cert on CAS array

Hi there,
I have an exchange 2010 CAS array with 2 servers in it. I need to roll out an updated SSL certificate as the old one has expired
however, it only seems to allow me to install this certificate on the CAS1 server.
When I did was I (using the GUI) created a new Exchange certificate. Put in the FQDN of both my CAS servers when I created
it (although only 4 SAN names appear on the cert on Godaddys website, that being imap, pop, mail and autodiscover). Got my SSL cert from the 3rd party. Completed the certificate and it seems to be ok one my CAS1 server. But then there is no SSL cert on the
CAS2 server. I just wondered how I would go about installing it on that server, or even if it is necessary to have it on there.
I tried exporting/importing it from CAS1 to CAS2 but on CAS2 it just shows it as "The certificate is invalid for Exchange
Server usage".
Any help is appreciated

First of all, you don't need the server names in the cert if your Exchange urls are configured to a load balanced url. Going forward, you will not be able to get a certificate from 3rd party with internal urls (server fqdn) in it.
When you export the certificate from CAS1, make sure that you include the private key as well (there will be a check box to tick) and import it back on CAS2.
If not, you can just import the certificate into CAS2 by selecting Import Exchange certificate in EMC and select the 3rd party cert (just like you imported on CAS1).
Yes, you need the certificate on both servers, otherwise you will get certificate errors on clients (assuming that there is some form of load balancing in place - NLB or hardware).

1.9 Roll out

Similar Messages

Maybe you are looking for