1 App-v package (5.0) won't start, howto repair (default repair won't work)

Hi,
I have this one App-v applicationon a server that won't start, I get some strange error what doesn't give any results in google. The application works fine on another server so the application itself is fine.
I tried to remove the package via powershell but it won't let me. Now I tried
Get-AppvClientPackage -All | Remove-AppVClientPackage hoping it would clear the cache (just as in 4.6), they are effectively gone but they show as installed in software center. Tried a computer policy refresh (they
are published to computer) but no change.
Please advise on this + what is the proper way to correct this problem in general (1 app-v that won't start on 1 server, whereas the App-v application is ok)?
J.
Jan Hoedt

Don't have the message anymore and cannot reproduce it. Never mind, you can close this post.
Packages are getting through after a reboot. I was only looking for an easy way to repair app-v packages, the powershell can do that but it does not refresh it directly, a reboot was necessary.
Jan Hoedt
Your best bet is to run a repair from the App-V console on the client. If you are using App-V 5.0 SP2+ then download the UI and run the repair
Cheers
Paul | sccmentor.wordpress.com

Similar Messages

  • Safari , App store , Ibook and preview won't work after the last update!

    i bought my mac book pro since early 2011
    and after i did the last update safari , App store , Ibook and preview won't work
    when i  press on it the small light on the dock light up then it goes off
    and nothing open and there is no error massage show
    and the bar don't change, plus about my mac don't open too
    firefox and itunes work fine tho

    I also deleted Safari and tried to reinstall it from the Apple website but It would not let me install it. I got to "select location" section and it would not allow me to select any of my drives because it said it required10.5.2 or newer. I have 10.5.3. Any Help?

  • My itunes store, app center, safari and mail won't work after upgrade

    I am very dissapointed in the new maverick upgrade. My app center, itune store, safari, and me mail won't work with the new upgrade. I called the help desk and they had me uninstall and re install the upgrade. he said i should have everything backed up cuz I will lose everything, but nothing was lost. It worked for a day, but now it doesn't work at all. it just gives me the hourglass circle symbol and finally times out. A couple of times  my computer gave me an error code that i wasn't connected to the internet, even though I could use chrome no problem. Another error code I got was that I wasn't signed in, but I am. Any suggestions?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • When updating my apps they turn grey and won't work anymore

    So when I go to the app store and click 'update all' it will go back to my home screen like normal but then the apps that should update go grey, say 'Waiting' and have the loading bar underneath but the bar won't fill! I also can't delete them to try and reinstall them. How do I fix this?

    Maybe you just have to wait.  Many apps take a lot of time (maybe even an hour or more) to download, the loading bar will move very slowly.

  • Why do I always have to download apps from my computer it won't work on phone?

    When I try to download apps from my phone it tells me I have to do it from my computer help!

    Thanks but It happens on all apps &only started recently, I used to be able to download straight from my phone. It now says the app will be available on your computer when you next log into iTunes

  • Why subtle animation for phone calls (other apps do) on iOS 5 won't work on iPhone4?

    So my problem is that each time im driving; perse using a GPS turn by turn app, and someone calls, iOS5 should have a subtle animation for calls right? well thats not for me, i still get that crappy push huge bubble which kills the app being used. I already tried going to setting-notifications-phone, and changed none/banners/alerts but nothing happens, still having the same problem!
    Can someone come with a solution!?
    PS I'm on iPhone 4 iOS 5.0; I'll never believe Scott Fostall again http://www.apple.com/ios/features.html#notification
    How come cydia has CallBar for iOS4 and us with iOS5 cant have the native tweak? Shame on you Scott and Tim!

    See here: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    B-rock

  • The packages i make won't work

    I am using winMe
    i compile a simple class called time1 that says its a package on the first line
    i call the package com.deitel.jthp3.ch08
    and i import com.deitel.jthp3.ch08.Time1
    in a file called TimeTest
    i can compile both files fine but when i run TimeTest i get the following error
    Exception in thread "main" java.lang.NoClassDefFounfError: com/deitel/jthp3/ch08/Time1
    at TimeTest.main(TimeTest.java:9)
    i tried a couple programs that make and import packages but i can't get any of them to work.
    Why??

    You can also put the top directory of your class files on the classpath so you don't have to keep jar'ing them. Or you can pass the classpath to java like:
    java -classpath .;c:\my\classes MyTestTime
    The . will make java look in the current directory for the class/package too.

  • App Err message and phone won't work

    For 2 days now my phone just show the clock spinning for several minutes, maybe up to an  hour, then a white screen pops up that says App Err, and click the middle button to reset and then if just goes back through the same process.  The folks at AT&T said I might need a software update, so I downloaded the desktop software onto my computer and have tried to update my phone that way, but it just does the same thing, the clock  just spins like it is thinking, and then it will just shut off.  Any advice on how to fix would be great.
    Thanks

    Hi ringjoe
    Welcome to the Community
    You can try a few suggestion regarding your Problem and Error that you got on your device :Here is KB that discuss the Error :
     KB23951 :" App Error 603 " is displayed on the BlackBerry smartphone .
    Or may need to use BBSAK to completely wipe your device OS have a look. :
    1.Locate your Carrier and Download the OS you desire from here and Install it in your PC or Laptop Carriers
    (make sure you are downloading for the same model as you have )
    2. Download and install the latest BlackBerry desktop software from here BlackBerry desktop software
        Then if it allow  perform your backup of your device.
    3.Search your C: drive for Vendor.xml and delete them, there may be one or two vendor.xml ( On your Pc change your folders option to show hidden files/folders ) :
        C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
        C:\Users\Windows UserName\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
     4. Use BBSAK from  http://bbsak.org/   and wipe the device then after you get the error 507 ( no OS ) then proceed to next step.
    5. Go to C:\Program Files\Common Files\Research In Motion\AppLoader. (For 64-bit Vista or Windows 7, the path       will be C: > Program Files x86 > Common Files > Research In Motion > AppLoader) double click Loader.exe. 
    Please try it and let us know.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Apps from old icloud account won't work with new apple id-Help

    I restored a number of ipads from an icloud backup, to include both bookmarks and Ipad apps to my team
    I then logged out of both the itunes and icloud accounts associated with these apps, and gave the ipads out to team members.
    They each made their own Apple ids to the personalise their accounts.
    However now some of them are having the problem that the original apps we installed on the first account don't work.
    Is this likely this will be a problem for them all? or is it a just a case of those affected having to do a reinstall.
    Thanks

    Welcome to Apple Support Communities
    Open Finder, press Option key, select Go > Library, open Preferences and delete com.apple.imessage.bag.plist and com.apple.imservice.iMessage.plist

  • Everytime i sync my ipod touch, the apps that i don't have running won't work anymore

    When I connect my iPod Touch to my computer, the apps that aren't running won't work anymore. The icons are still there but the app itself doesn't open. I tried syncing it to my backups but it's useless. Please help!

    Connect the device to your computer, open iTunes, restore the iPod to factory settings.
    Good Luck

  • WiFi won't work on Mountain Lion

    Hello,
    I installed Mountain Lion yesterday and all went ok until I noticed that my WiFi isn't working. WiFi seems to be connected to my MacBookPro, that's what indicates the sign in the upper right corner (full WiFi). If I start Safari, Mail, App Store and iTunes internet won't work. All worked fine with Lion. On other Apple devices and Windows computers in our house WiFi works perfectly.
    Ethernet works.
    Does anyone have any suggestions what to do?

    If you are attempting to use a WiFi connection between the iMac and the Time Capsule, I would suggest the following as a possibility.  If you haven't already, on your "iMac" open your Applications folder>click on "Utilities">click on "Airport Utility">there you should see an icon with your Time Capsule showing, and there should be a Green light icon. Then click on the icon for the Time Capsule, which will bring up a box with an "Edit" button.  Click on "Edit" and there you will find the Basestation,Wireless, Network, etc. buttons.  Click on each, one at a time.  You should check that each of those is completed properly.  Then, go back to the "Applications" folder>System Preferences>Network>here Unlock the "Padlock" icon in the lower left corner of the window by clicking on it and entering your Passwword>turn "On" the WiFi lisitng in the column of networks above there.  Hopefully this all will resolve your issues.

  • App-V packages won't run until they are fully download - App-V 5.0 SP2

    Hey guys
    we're using App-V 5.0 in our Pooled VDI environment
    we waited for HF4 for a long time to be able to upgrade from SP1 to SP2
    now we have a new Base Image with that client and with %APPDATA% folder redirection (unlike the Base Image with SP1 client that the %APPDATA% is local
    we're facing a weird issue that I couldn't find any solution for it
    When user logs on to the SP2 HF4 image, it takes FOREVER until we see App-V package shortcuts and can start using them (Some of the packages are a few GBs).
    Finally when the packages fully arrive I see on the App-V Client UI that the package is ready for offline use! though we never check the
    Force application(s) to be fully downloaded before launching (recommended for low/WAN networks) during the streaming phase while sequencing
    when I go to the Event viewer I see thousands of these:
    it's like there's an event for each file in each package
    The same user with the same permission logs on to an image with SP1 client and he can start use App-V packages immidiately.
    even if we load the packages manually it doesn't take so much time like it does on the logon refresh
    nothing has changed in our client configuration settings between the versions
    any suggestions?
    thanks
    Tamir Levy

    Hi Agalucci
    thank you for your reply. I know this is not an error. it's just there's event for every file of every unsynced package and it can take an hour until the sync completes.
    * my environment is non-persistant VDI
    * We do have some Applications on the master image so it includes C:\ProgramData\App-V
    * This is a tricky one. I use standard folder redirection on my %APPDATA% folder, so... you tell me. I use citrix UPM for roaming. from my understanding it is useless to exclude the catalog folder from there as %APPDATA% is not managed via UPM.  tried
    to find what is the best practice in this case and couldn't find a documentation about running a logoff script that will delete this folder.
    we don't update our master image very often so there are some applications that are synced only when the users logon (BTW, we also use Share Content Mode)
    but my complain is about the fact that Office 2013 for example, it can take 20 minutes to sequence, which in fact it doesn't need to download the package as we use Shared Content Mode so I don't uderstand why it is taking so long
    Tamir Levy

  • Can I have a Mavericks disc mailed to my house? I had trouble downloading it through the App Store, and now it won't do anything at all when redownloading it.

    Can I have a Mavericks disc mailed to my house? I had trouble downloading it through the App Store, and now it won't do anything at all when redownloading it.

    Apple doesn't create installation disks for OSX 10.7 and later. You can create your own disk/USB bootable installer, but this requires downloading the installation package from the app store first.
    1) Make sure you have a stable internet connection. Try directly connecting via ethernet port, versus Wifi, if you are experiencing a weak Wifi Signal or intermediate loss of connectivity
    2) From the App Store, go to the Menu Bar, Store > Sign out.
    3) Navigate to the /Applications folder and drag the partially completed download of the installer to the trash.
    4) Open the App store, sign back in, and redownload Mavericks.

  • How to add osd file into app-v package - need to have two osd files within one app-v package

    We have app-v 4.6 sp2 I get one app-v existing package which has two OSD files associated.
    It is needed for separate license servers located in different sites. I need to create a new app-v package with new version of this application and want to have similar two OSD files associated with it. How to do it?

    Using Notepad for creating a new copy of an OSD is OK, but requires some thinking:
    Inside the new OSD, the NAME= and/or VERSION= attribute should be modified: you shall not have two applications with the same Name+Version combination
    the name of the new OSD file should be added to .sprj file (similar to the original OSD file name) as this motivates the Sequencer to load both OSDs when opening the package
    inside the OSD in the <MGMT_SHORTCUTLIST> section the name of the shortcut file (.lnk) shopuld be adjusted
    The new OSD won't get added to the MSI (if you are using that) unless you open & save the package in the Sequencer.
    Sorry Dan, but except for super-professionals I'd advise
    Use GridMetric
    Application Virtualization Explorer to add/modify shortcuts (you'd need the Professional Edition for App-V 4)
    or
    If you already have the package with just one OSD: select the 'Modify an existing packge' in the Sequencer, then use the 'Add
    Application' wizard. Quite at the end this will bring you to the 'shortcuts and file type associations' step. In there you can create a new shortcut (resulting in a new OSD). Other wizards make it more difficult (or impossible) to add shortcuts: https://kirxblog.wordpress.com/2011/06/01/app-v-4-6-sp1-the-right-sequencing-wizard/
    Falko
    Twitter
    @kirk_tn   |   Blog
    kirxblog   |   Web
    kirx.org   |   Fireside
    appvbook.com

  • Sharepoint opendocument class add-on removed within the app-v package

    Hi all,
    On my environment the computers have the office installed locally (Office professional plus), I'm sequencing a package with Office Pro Plus + Visio + Project. The objetive of this is to let the users use visio and project for a certain amount of
    time.
    When I remove the package from the client the IE opendocument class add-on is removed, then they aren't able to edit office documents in sharepoint. The solution to this issue was to repair office. But this won't work on our production environment.
    Do any of you have faced a problem like this or do you now any way to prevent that the add on will be removed ?
    My environment is:
    App-V 5 SP1 (Server and client)
    The package contains: Office 2010 Professional Plu, Visio Standard, Project Standard, the office deployment kit.
    The packages are administered with the app-v management console.
    Thanks in advance
    Regards

    Office installed locally and delivered as an App-V package isn't supported, I'd suggest that if Office Pro Plus is installed, then also install Visio and Project.
    Note that Office applications licensed through Volume License, are device-based licensing. I would be very careful about providing Office suites/applications to users for a certain amount of time, as that does not adhere to the license agreement. Be careful
    in case your company is audited.
    If you need to provide users with access to Visio and/or Project, then you need to license the users's physical device.
    Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
    answer your question). This can be beneficial to other community members reading the thread.
    This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
    Twitter:
    @stealthpuppy | Blog:
    stealthpuppy.com |
    The Definitive Guide to Delivering Microsoft Office with App-V

Maybe you are looking for