1+area code and phone

When I add numbers or search from Google maps all phone numbers are coming up 1 + area code and phone number. Is there a way to turn off the "1+" and just have area code and phone number?

In areas that have more than one area code for the same geographic area, 10 digit dialing with area code is mandatory. 1+ dialing is required from land lines, but the 1+ is optional from mobile phones.
"What is an Area Code Overlay?
An overlay is the addition of another area code to the same geographic region as an existing area code. An overlay does not require customers to change their existing area code.
What Will be the New Dialing Procedure?
To complete calls from a landline phone, the new dialing procedure requires callers to dial 1 + area code + telephone number. This means that all calls in the 310 area code that are currently dialed with seven digits will need to be dialed using 1+ area code + telephone number.
To complete calls from a cellular or mobile phone, callers may dial the area code + telephone number or 1 + area code and telephone number whenever placing a call from a phone number with an overlay area code."
Since it doesn't matter using a mobile phone, I guess the databases have included the 1+ for completeness and all users (mobile and land line) can be accommodated.

Similar Messages

1 + area code and phone number

All phone numbers are coming up 1 + area code and phone number. Is there a way to turn off the "1+" and just have area code and phone number?

In areas that have more than one area code for the same geographic area, 10 digit dialing with area code is mandatory. 1+ dialing is required from land lines, but the 1+ is optional from mobile phones.
"What is an Area Code Overlay?
An overlay is the addition of another area code to the same geographic region as an existing area code. An overlay does not require customers to change their existing area code.
What Will be the New Dialing Procedure?
To complete calls from a landline phone, the new dialing procedure requires callers to dial 1 + area code + telephone number. This means that all calls in the 310 area code that are currently dialed with seven digits will need to be dialed using 1+ area code + telephone number.
To complete calls from a cellular or mobile phone, callers may dial the area code + telephone number or 1 + area code and telephone number whenever placing a call from a phone number with an overlay area code."
Since it doesn't matter using a mobile phone, I guess the databases have included the 1+ for completeness and all users (mobile and land line) can be accommodated.

I keep getting calls from non existing area codes and phone numbers. They are never the same number twice. How do I stop this?

About a week ago I started getting phone calls on my cell phone from numbers that do not exist, including the area codes. I can not report these to the Do Not Call list because the area code is non existent. I'm getting these calls all the time now and never from the same number twice so there's no point in blocking them. If I answer I may or may not get a person who has an accent from India so heavy that I can't understand what they are saying. This is getting to the point where I just want to cry I'm so frustrated. Anyone else having this issue or does anyone know how to stop it?
Thank you

I'm sorry that you are having all these troubles. I have sent you a private message.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

How to add "1" in front of area code and phone number?

The phone numbers I imported into my iPhone from my Address Book don't have a "1" in front of them. So now, when I'm out of town and want to dial a number from Contacts, an automated message from my carrier tells me the number I'm dialing is long distance and requires a "1" at the beginning. On my old Treo, I could add a "1" in the "Dialing" set-up menu. The system knew enough to ignore it for local calls but enabled it for long distance calls. Is there no way to do this on iPhone? Many thanks.

This is one of the many lacking iPhone features that I've taken for granted in other basic cell phones for years. Ironically, the iPhone's weakest part is the phone.
Rogers will put through a call that has been dialed without the "1", but only after listening to a lengthy message that encourages you to program all of your phone numbers with the "1".
Sure, you can prepend a "1" before all phone numbers in your address book, however, that will cause problems if you share your address book with your computer and use an autodialer on your computer, because most land lines won't tolerate the "1" before a local number.

Double contacts as "iPhone"...my phone saves the same number twice, once with a 1 before the area code and one without it. It causes two different threads in my texts even of they're saved as the same contact

my phone saves the same number twice, once with a 1 before the area code and one without it. It causes two different threads in my texts even of they're saved as the same contact

My wife is having the same problems as a reciever. She works in a school as a teaching assistant and her teacher sends messages that are mixed with previous texts from ages ago.
Can anyone shed some light on this problem or is it only her and this poster?
2m42s

Area codes and calling plans

Is it possible to get a phone on a calling plan that has a different area code than the "home" area? I have 3 phones that are all 970 area codes (Colorado), but I need to get another phone for WV (304). Can I do that on the same plan, or does it have to be on its own?

You can have different area codes and "home" areas on the same plan. When we added a line for my Mom (she's in NY, we are in CA) we had to initially set it up with a local number, then change the number to her area code to get a number that would be "local" for her.
You do not need a separate plan, a long as there are 5 or less phones on your plan. You said this would be the 4th one, so there should be no problems with adding a the line and getting a 304 area code.

I receive an error message whenever I text recently entered contacts. It says the number is invalid. I have tried entering the number with the area code and without the area code.

I receive an error message whenever I try to send text messages to new contacts. It says the number is invalid and to enter a 10 digit number. I have tried entering the phone number with the area code and without the area code. Any ideas?

Same problem here. I've deleted the contact and had them text me, but when I try to text them back I get the same invalid number message! So frustrating! Please help!

Zipcodes and area code and state name

hi,
to all, when am hireing a person in the addressinfotype(0006) in that it is asking areacode where i can find the area code and statename and zipcode.

ZIP Codes have to be configured in Table T5UZC. A range can be entered. The range of ZIP Codes used in each state can be determined at the following URL, but not all services are free. The URL is: http://www.maponics.com/
If you have the other elements of the address and need the ZIP Code, use the following URL to find it. The URL is: http://zip4.usps.com/zip4/welcome.jsp
Howard
Edited by: Howard Gardner on Jun 21, 2010 3:07 PM
Edited by: Howard Gardner on Jun 21, 2010 3:39 PM

Blocking Outbound Calls by Area Code and Time Zone

I am looking to block agents from making outbound calls to certain time zones by area code. Can't quite get my head around how I can use route filters with time schedules. Any help would be appreciated.

Create the route patterns for those area codes and then configure one which allows the calls, and another one that blocks the calls, use TOD to enable/disable them as required.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

I am unable to change my credit card number, because my profile shows United States therefore it does not accept the phone area code, and zip number, because I live in Switzerland. Please inform me how to do it. Many thanks.

I am unable to change my credit card number because my apple profile shows me as a resident of the United States, although I live in Switzerland. Consequently I cannot edit my area code, zip number, State info, etc. Please advise me how to do it. Many thanks.

Hello Luis,
To update your billing information, you would need to change your iTunes Store country to be able to enter the information for Switzerland. I found an article with the steps to update this:
Change your iTunes Store country
Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
You can find the full article here:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Append Area Code to Phone Number

I have a table with about 30,000 rows and of that, 1200 have phone numbers without an area code. I would like to append the area code to these phone numbers. What's the quickest and easiest way to do this? I've already identified the rows needing the update. The column datatype is just "VARCHAR2 (20 Byte)". Thanks!

Hi,
user13158017 wrote:
Frank, taking what you wrote, this is what I came up with. What do you think? Thanks.
Update Vendors
Set Phone_Number = '972' || Phone_Number
Where length(Phone_Number) < 10;You've got the idea. That's fine.
Whenever you post code, even if it's only 3 lines, format it to make it easy to read and understand.
For example:
Update      Vendors
Set      Phone_Number     = '972' || Phone_Number
Where      length (Phone_Number)     < 10; When posting any formatted text on this site, type these 6 characters:
\(all small letters, inside curly brackets} before and after each section of formatted text, to keep the spacing.

HT1040 In iPhoto I created a book I wanted to purchase. When I did so and entered my billing information, it would not let me enter my full area code or phone number. It would not let me enter the last two digits of my area code or my phone number. Help p

Please help answer this question!

Also make sure you have the correct Print Store selected in iPhoto's Advanced preference pane:
OT

TS2755 I received an error message after texting, unsuccessfully to a number w/o the area code. After adding the area code and trying again, the messaging app won't forget the seven-digit number and recognize the added area code.

I have deleted the contact, rebooted, changed the contact name and added the ten-digit number. Send Message reverts to the old contact name, refusing to recognize the new contact name, or the ten-digit number. How do I overcome this sticky piece of messaging memory? I have an iPhone 4 with iOS7.

The fix for this problem is easy and is set out here: http://edctips.blogspot.com/2014/09/fixing-iphone-texting-problem.html

Just found that someone has called a number with 317 area code numerous times and billed to my number. How can this happen??

Was wondering what was going with my time that I purchased and checked my usage and found over several months someone has been calling a number in 317 area code and was being billed to my number

Every time I make a call it is announced how many minutes remains, I could not believe I was using this many minutes. I checked my usage and found that there were numerous (10's if not 100') calls made to a phone in the 317 area code, using up the most of my minutes over the last several months.
I don't know any one in this area, (I looked it up online and if I remember correctly, it is in Indiana)
I will be glad to send you a copy of my usage. I work for myself, it will be afterwhile when I can get back with you.
Thanks so much for helping me
Jerry

IPhone3g Cannot send SMS Messages without entering phone number w/area code

i get an error 1121611611 "please enter 10 digit number". The contact i messaged number is 10 digits in my contacts. I hope i dont have to re-enter the phone number with area code for every text message. any solution to this problem, is there a way to automatically include the area code on text messaging? The contact has the same area code as me.
Thanks

I am having the same problem as well...it seems that for dummies like me who never spent much time texting before I got the iphone that I did not know you had to enter a person's area code also to text them (hence the 10 digit error message).
That said, I, like you, put in the area code and got things to work--problem is when you save to Favorites. So here is what I discovered on my own while chatting with an Apple tech support rep: When you save to Favorites, if the person you are calling/texting has your same area code, the program then deletes the area code prior to dialing and you can't get out. I gave the tip to the tech--she said she would forward it to the appropriate folks. It seems they need to slightly change the code so that Favorites does not eliminate the area code on local calls/texts. I also talked to ATT who said that ideally one should always use the area code for all calls--not sure why as it works just fine to not enter it, but that is what she said.
So my workaround for now is to not have my wife in Favorites so that I can text her--seems to work ok if just dialing from Contacts as long as you have the area code stored with the number in Contacts.
Hope this works for you as it did for me--hope they will address it and fix it.

1+area code and phone

Similar Messages

Maybe you are looking for