1 characteristics in different aggregates

Hi,
Can someone explain me the following,
Say we have a characteristics A, B, C in an infocube, and we have built 3 aggregates on that infocube.
1st Aggregate contains Characteristics A
2nd Aggregate contains Characteristics B
3rd aggregate contains Characteristics A and C
My question is why do we need to add a single characteristics in two different aggregates ??
And when we do a change run for suppose A, both the 1st and 3rd Aggregate will be captured rite??
Points will be rewarded.
Thanks in advance

Hi,
Look Aggregate are build on Master data. u have aggregates build on "A", "B", "A and C"
if there is a change in Master data For " A"
Then when u run the change run for Aggregate build on "A" the change will be reflected in Aggregate "A"
and if u dont run change run on Aggregate build on " A and C"
then the change of master data "A" wont be reflected in Aggregate "A and C"
To reflect this change u need to run the change run For Aggregate " A and C"
Thanks,
Nagesh
Edited by: Nagesh Mule on Jan 29, 2008 7:29 AM

Similar Messages

Pivot table in BI Publisher: Different aggregate functions in data columns

Hi, everyone!
I`ve got some troubles with pivot table in my rtf-template.
Here is my xml:
<ROWSET>
 <ROW>
 <_BI_SUBRF_MO_._MUN_NAME_>МО Петроградский р-н</_BI_SUBRF_MO_._MUN_NAME_>
 <_BI_PERS_ACCOUNT_CARD_._BI_PAC_NMB_>714000003</_BI_PERS_ACCOUNT_CARD_._BI_PAC_NMB_>
 <_BI_MONTH_DEBET_._BI_DEBET_SUM_>0.0</_BI_MONTH_DEBET_._BI_DEBET_SUM_>
 <_BI_CALENDAR_._YEAR__>2009</_BI_CALENDAR_._YEAR__>
 <_BI_CALENDAR_._MONTH__>8</_BI_CALENDAR_._MONTH__>
 </ROW>
 <ROW>
 <_BI_SUBRF_MO_._MUN_NAME_>МО Петроградский р-н</_BI_SUBRF_MO_._MUN_NAME_>
 <_BI_PERS_ACCOUNT_CARD_._BI_PAC_NMB_>714000004</_BI_PERS_ACCOUNT_CARD_._BI_PAC_NMB_>
 <_BI_MONTH_DEBET_._BI_DEBET_SUM_>165.58</_BI_MONTH_DEBET_._BI_DEBET_SUM_>
 <_BI_CALENDAR_._YEAR__>2009</_BI_CALENDAR_._YEAR__>
 <_BI_CALENDAR_._MONTH__>7</_BI_CALENDAR_._MONTH__>
 </ROW>
 <ROW>
 <_BI_SUBRF_MO_._MUN_NAME_>МО Петроградский р-н</_BI_SUBRF_MO_._MUN_NAME_>
 <_BI_PERS_ACCOUNT_CARD_._BI_PAC_NMB_>714000004</_BI_PERS_ACCOUNT_CARD_._BI_PAC_NMB_>
 <_BI_MONTH_DEBET_._BI_DEBET_SUM_>165.58</_BI_MONTH_DEBET_._BI_DEBET_SUM_>
 <_BI_CALENDAR_._YEAR__>2009</_BI_CALENDAR_._YEAR__>
 <_BI_CALENDAR_._MONTH__>7</_BI_CALENDAR_._MONTH__>
 </ROW>
...... and so on..
</ROWSET>
In the pivot table i`d like to see one row for every BISUBRF_MO_._MUN_NAME_ using BICALENDAR_._YEAR__ and BICALENDAR_._MONTH__ as measures and sum of BIMONTH_DEBET_._BI_DEBET_SUM_ and count of unique (or at least just count of) BIPERS_ACCOUNT_CARD_._BI_PAC_NMB_ in cells.
I create a pivot table using wizard, everything ok except one thing: as i understand, in pivot table for data in rows we can use only one kind of aggregate function e.g. only sum or only count.
Is there any way to use different aggregate functions in data cells?
Thank you

As you can see, when we use crosstab tag we can specify only one aggregate function for data cells.
Is there any way to get in XSL-FO (where we can what really happens) instead of:
<T1>
<xsl:value-of select="sum(current-group()/_BI_PERS_ACCOUNT_CARD_._BI_PAC_UNID_)"/>
</T1>
<T2>
<xsl:value-of select="sum(current-group()/_BI_MONTH_DEBET_._BI_DEBET_SUM_)"/>
</T2>
this
<T1>
<xsl:value-of select="sum(current-group()/_BI_PERS_ACCOUNT_CARD_._BI_PAC_UNID_)"/>
</T1>
<T2>
<xsl:value-of select="count(current-group()/_BI_MONTH_DEBET_._BI_DEBET_SUM_)"/>
</T2>
Edited by: user12115038 on 26.10.2009 8:08

RRI Jumps from Different Characteristics Produce Different Results

Hi experts,
I am having the problem that when I jump from different characteristics in the same row in sender query, I got different result sets. E.g. when I choose "Go to" from the "Name" char I got one record, but from "Transaction Description" char multiple records.
Could anyone please clarify this problem?
Thanks,
Joon

Hi,
check the info object mapping in RSBBS.   some time same kind of charactorstics is available in the destination report it show such kind of error.
Eg.   0customer to 0ship_to_party , or sold to party ect.
Just go to RSBBS
select the type as infoobject ...
Field name   = target field
for more clarification please refer below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?QuickLink=index&overridelayout=true
regards
bvr

Different aggregate rule for different measures?

Hi.I have an outline with two members in measures dimension:Activity and Profit. Other dimensions including Period,Account,Area,Cost Center etc.The customer require the Activity measure to be aggregated on all dimensions. But as the Profit measure, when Period and Account members are the same, the Profit value on the level 0 member of Area and Cost Center will be either #Missing or an equal number. And the aggregate rule on Area and Cost Center,while Period and Account members are the same, should be to copy one none-missing value(if exists) to the upper level member.For example,if Area has three children:area1,area2,area3. When fixing Period Account and Cost Center,the Profit on area1 is 15,area2 is #missing,area3 is 15. Then the Profit on Area should be 15. So is on the dimension Cost Center.How can I design a formula or a calc script to do it?Thanks!

What I found in Oracle presentation is that in 10GR2 compressed cube enhancements support all aggregation methods except weighted methods (first, last, minimum, maximum and so on). It is from September 2005 so maybe something changed since then.
Regarding your question about the results I think it is caused by the fact that calculation are made on doubles and then there is a compression, so maybe precsion is lost a little bit :(. I really am curious whether it is because of numeric (precision loss) issues.

What are the guidelines for creating aggregates?

Hi Everyone,
I am required to create aggregates for an infoprovider.
On what guidelines and criterias should I determine how many aggregates to create and what characteristics should be included in the aggregates?
For example if i have 5 queries created for this infoprovider and the selection inputs for each query is different. The number of characteristics displayed in the query is also different.
Does it mean I should have 5 different aggregates for this infoprovider?
Thanks.
Regards,
Shunhui.

hi Shunhui,
take a look ppt and e-learning on aggregate
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/fe5b0b5e-0501-0010-cd88-c871915ec3bf [original link is broken]
'intermediate course' - SAP BW Query Performance Tuning with Aggregates
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/d9fd84ad-0701-0010-d9a5-ba726caa585d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
you may not need 5 aggregates
Tips for Building (and Maintaining) Good Aggregates:
-Relatively small compared to parent InfoCube
-Try for summarization ratios of 10 or higher
-Not too specific, not too general should serve many different query navigations
try to combine characteristics used in query and check the summarization ratio and get the best combination,
e.g aggregate contains char1, char2 have good ratio
and char3,char4 and char5 have another good ratio,
then you just need 2 aggregates.
hope this helps.

Is there a way to restrict two infoproviders of different characterisitcs by creating single variables

Hi Experts,
I am new to BEx. I am facing some issues in variable creation. I have two infoproviders(composite provider in my case). One infoprovider is loaded with ECC data and another infoprovider is loaded with transaction data. In reporting layer, our requirement is to show 3 dashboards all together by using tabs and filter panel should be same for all the 3 dashboards.
For example, one of the filter panel variable is "date range", our requirement is to use one "date range" variable to restrict all 3 dashboards. Since the characteristics of these two infoproviders are different like 0calday for transaction data and 0ship_date for ECC date. So I couldnt create a single variable for these two infoproviders(since the characteristics are different).
But I want to know, is there any other way to meet our requirement in BEx.
Thanks in Advance.
Regards
Saranya S

Hi Saranya,
i think you need to post this question in Business objects forum.
but since you are usign composite provider, you can map the0calday with 0ship_date right?
so that it will be one object for filters working on this composite provider?
Regards,
Sakthi

Copy of Batch characteristics value from material master to Batch

Hi Gurus,
I have maintained some values in the characteristics under batch classification in material master and want to copy the values in batch characteristics during batch creation at process order release.
Can any one help me to achieve this in standard way?
Thanks
Sandip

Hi,
Try to understand the batch classification functionality...In batch classification characteristic values changes from batch to batch...Values should not be maintained in the material master...it does not have any meaning...in the material master we need to assign only the batch class with class type 023 in classification view ...no need to assign the values there....Batch classification means characteristics values differs from batch to batch...
Thanks
Kumar

[SD] Third party with Ship-to different to Sold-to

Dear all,
>> In sales order third-party, I change the partner Ship-to different to Sold-to. When making good receipts for the relavant Purchase order (created for this sales order), the system outputs the Error Message no. KE396: Inconsistency between a document field and the prof. segment number
>> The detail explanation for this message issued by system is following:
Diagnosis
A line item was assigned to a profitability segment (number 0000124336) which has the value 0000001000 for characteristic Customer. The original document (FI document, sales order, internal order, etc.), however, contains 0000001010 in this field. It is therefore inconsistent with the profitability segment found.
System Response
The characteristics in Profitability Analysis (CO-PA) must have the same characteristic values as the original document. For example, you cannot assign a sales order to a different customer or product than the one contained in the original sales order. If you wish to fill the characteristics with different contents, you must change the original fields.
Procedure
Enter the correct characteristic values on the CO-PA assignment screen. The system will automatically assign a corresponding profitability segment number. If it is not possible to enter values in some of these fields, delete the entire assignment to a profitability segment number and then enter it again.
As a rule, you should first enter the fields in the original sender document and then make the assignment to a profitability segment.
Thanks,
Son

Dear Chandra Duvvada,
Thanks for your reponse. T-code KEDR is used for derivation that we can use to assign new value Ship-to based on Sold-to in COPA. However, it is not adapted to this case. Because in PO, the customer field has value as the shipto in sales order. And the system is not allowed. We decide not use different Ship-to in case third party sales.
Thanks for your answer.
Son

Aggregate Level

Hi all,
I am trying to create a aggregate for an infocube. Is it possible to create 2 different aggregate level for same Infoobject?
Say for exampl, i have infobject 0CO_AREA, i need to use it aggregation level 1 as well as aggregation level 2.
Please give me a suggestion,
Ill assign pionts,
Thanks in advance
Regards
Pooja

Not sure I understand the question.
You can certainly have multiple aggregates, with 0CO_AREA in each aggregate. You can have one aggregate be a more summarized aggregate. You can also create different aggregates with each on e specifying different fixed values for 0CO_AREA.
Or are you trying to create an aggregate that includes 0CO_AREA hierarchy levels?
Providing more details would help me understand what you want to do.

COPA Report - Characteristics

Hi.
A report has been created via KE30 in our test system. Rather than transporting it i'd like to create it in our prod system. The listing of characteristics are different tho. For example, Posting Date is available in test but not prod. Is there a setting that provides a subset of characteristics that should be unchecked in prod? any suggestions are appreciated.
thanks!

hi,
Yes, you can create report in Production,but there is no sync between systems(Development,Quality and Production).
Thanks,
Rau

Aggregates for master data & Line item Dimension

Hi i have question
1 Can we create Aggregate for Master Data?
2 Can we create Aggregate with Navigational Attributes?
3 Can we create Aggregate with Line Item Dimension?
4 How many dimension we can add with how many characteristics in it if we create a new Aggregate

1 Can we create Aggregate for Master Data? - No
2 Can we create Aggregate with Navigational Attributes? - No
3 Can we create Aggregate with Line Item Dimension? - No
4 How many dimension we can add with how many characteristics in it if we create a new Aggregate - You can create a maximum of 13 dimensions in the cube.You can add as many characteristics for an aggregate,adding many characteristics in the aggregate is as good as having the query fetch data from the Cube instead of the aggregates.
Aggregates are subsets infocubes derived from the main InfoCube to increase the query performance.You can create as many aggregates you want in an InfoCube.
For each aggregate,internally dimensions are created based on the selected characteristics.
Take a look at this link for detail information...
http://help.sap.com/saphelp_nw04/helpdata/en/7d/eb683cc5e8ca68e10000000a114084/content.htm

Tables in PSA and Aggregates

Hi,
Wt are the Tables present in PSA and Aggregates???
Regards,
siv

Hi,
Goto RSA1 -> PSA -> Right click on the Infosource and select delete PSA data -> A new screen is shown where the technical name of the PSA is displayed. It should be /BIC/*******. Copy that and come out of the screen.
In SE16 click F4 and then Information System.In the Short Description field put in the name of the InfoSource within *, like 0MATERIAL_ATTR and click the check mark. You will get the /BIC/ table (PSA table) that you are looking for.
U can know the PSA table name by going to the PSA (RSA15) in AWB.
Choose the infosource ....beneath it u can find ur PSA name...its an extention of the uinfosource name.
You can see the different aggregate tables in Se16 by putting in the technical name of the aggregate, like 100178. You can look at the aggregate data in LISTCUBE using the same technical name
Select InfoCube -> Maintain Aggregates -> on right panel select or highlight the aggregate -> choose menu GOTO -> Aggregate Data. This will put u to the List Cube of the Technical Name of the Aggregate directly
Hareesh

One Cube from 3 Different ODS's

Is it possible to create a single cube from three different ODS's , the ODS's have same characteristics but different key figures.
Thanks

As you mentioned , that all your ODS have the same characteristics you could create seperate update rules for all 3 ODS Objects..
The difference will be only in the Key Figure update rule where only the Key figure present in the ODS will be mapped to the cube and the rest will be blank meaning no update..
Hope this helps..
ashish.

Aggregates usage

gurus
i have to evaluate all my aggregates in production and get rid of few of them.
questions what i have is
when was the last time any query actually accessed my aggregate?
what are the queries which actually use this aggregate?
we do have statistics cubes active. i used the standard Aggregate usage query but i am not convienced with the data. it actually shows only one query has used my aggregate
i am trying to get information from RSDDSTAT and RSDDSTATAGGR tables but i am able to understand which of the available fields will answer my question
can anyone help me out please. would be great if you can be more specific
thanks

Are your queries on multiproviders? I believe some of what gets captured for multiproviders has changed over versions and SPs, but not all aggregate usage gets logged in RSDDSTAT. At one point MultiProvider queries that ran in parallel did not log the aggregate, and before that, a MP couldn't use an aggregate. I'm not 100% certain what scenarios get logged, but if you think about it, a MP query could be hitting the multiple aggregates - both aggregates from the different underlying cubes and in some cases, different aggregates on the same cube for different Restricted KF. Since BW is only logging to RSDDSTAT a single entry for that query navigation, it can't possibly reflect the use of multiple aggregates. I believe I saw a while back that indicated that in this case, no aggregate would be included on the record written to RSDDSTAT.
An easy way to confirm this would be to look at the usage counts and last used date/time in the Maintenance for Aggregate window. That will tell you how many times an aggregate has actually been used and the last time it was used. These should give you a confirmation about which ones are being used the most. This, unfortunately, is a total for the aggregate and is not at the query level.
You can compare the usage counts shown in the Maintenance of Aggregate screen (count is from the aggregate's creation/last change) with what you get from RSDDSTAT for the same timeframe. I'll bet that for Multiproviders RSDDSTAT is too low.

Aggregate History

Is the a place that store aggregate usage history? I know you can get last used date in the aggregate maintenance screen. The only problem is that the last used date gets reset when you do a roll-up.
Ultimately, what I trying to do is delete unused aggregates. I want check if an aggregate has been used in the past 3 month. If not I want to delete it.
Thanks,
Matt

If you're on 3.x, the table RSDDSTAT should contain a row for each navigation of the query, and indicates if/which aggregate was used. This does hold true for MultiProviders as only one row exists and a MultiProvider obviously could reference more than one aggregate, which is actually true as well for an InfoCube query that has multiple RKFs in it - each RKF could use a different aggregate depending on the RKF definition.
Have to believe though this is captured somewhere else as well, because when you are in the Aggr Maint screen, it tells used the last date/time each aggregate of a cube was used.

1 characteristics in different aggregates

Similar Messages

Maybe you are looking for