1 coax cable - 2 different routers through splitter - 2 different IP addresses -- Possible?

Hello,
I currently have a verizon fios internet connection shared with my family through phones/laptops/desktops/etc. I am also starting a home business which requires constant internet usage and because of this I want a seperate line.
The wiring in my house is a bit weird so I was recommended by a friend to try an alternative method.
So, I'm wondering if the following is possible:
Currently, there is 1 coax running from the basement verizon box up to the second floor to a router. What I would essentially do is have a coax splitter at the second floor which feeds in to the two routers and each having their own verizon account associated with them. One router would have its own IP address for the family and one would be for my business with its own IP address. Seeing how coax has many frequencies, this should be possible but the billing department told me that I would need a second coax cable for a second router. This kind of ruins things completely.
So, I may have just explained it wrong to the representitive on the phone so I'm wondering if this is possible.
TL;DR Is it possible to have 1 coax cable which has a splitter which then feeds into two routers on two different verizon accounts with two different IP addresses.
Thank You.

lirik wrote:
Hello,
I currently have a verizon fios internet connection shared with my family through phones/laptops/desktops/etc. I am also starting a home business which requires constant internet usage and because of this I want a seperate line.
Thank You.
Do you only want the separate line so as to not have the other traffic or do you want it so that you have a different ip address?
You can get a business fios account, that will give you 5 ip addresses.
You can run a second router off your first router and give it a different subnet that is unique for your business traffic.

Similar Messages

Different PO through SOCO with different delivery address

Hi,
We are facing issue with sourcing cockpit. While creating purchase
order for multiple shopping carts through Sourcing cockpit, If multiple
line item have different shipping location it is creating different
Purchase orders.
We have requirement to create one PO with same vendor for multiple line
items. For above problem we are keeping same vendor even though it
creates two seperate POs.
Kindly advise.
Thank you
Ritesh

Hi Ritesh,
Please check the answers in this thread :
PO split in sourcing cockpit ? :-(
BADI BBP_SC_TRANSFER_BE
Method GROUP_PO
Kind regards,
Yann
Message was edited by: Yann Bouillut

Melted Coax cable, Hot to touch 2 way splitter

I lost all my services (TV and Internet) yesterday. When I checked the splitter in the basement it was too hot to touch and the end of the supply coax cable was melting. The service contact's response was , WOW that's not suposed to happen. Hopefully the tech's can repair today. Any ideas what caused this and can it be prevented?

Make sure the ONT is properly grounded. It sounds like a shorted device or coax somewhere. Something should have taken out a safety before a coax "melted" The tech will need to troubleshoot this issue. Anything less would just be an assumption.
If it were my house I would unplug the ONT power and disconnect the battery. Please consult tech support prior to doing this.

Can I connect a second router to the coax cable.

In my house Verizon fios goes into a box and a coax cable comes out and splits in one direction towards a set top box and in another direction to an Actiontec M1424WR router. An eithernet cable connects the router to a computer. All is well. This works fine.
Now I want to install another computer next to the TV. It sits a long way from the Actiontec, wireless is flakey and i dread the idea of pulling a long cat5 cable through my attic to connect the computer to the Actiontec?
Will it work if I put a splitter on the end of the coax in the room with the tv, run one wire to the stb, and the other to a new router?
Solved!
Go to Solution.

Not a second router ... you want to go to your favorite online retailer (like Amazon.com) and purchase an ActionTEC ECB2200 (also called an HME2200) MoCA Ethernet Adapter. Plug and play and you're all set -- it will automatically link up over the Coax to your ActionTEC router and provide a LAN connection at the second location for you.
You can search the forums for the ECB2200 / HME2200 and you'll find numerous discussions on this device.
I use this in my home network setup and it works great.

HT1918 Hi - I think I have different apple devices recorded under different apple IDs. Now I would like to consolidate all the devices under one Apple-ID. I have tried to do this going through the manage accoung like, but it timed out - could somebody he

Hi - I think I have different apple devices recorded under different apple IDs. Now I would like to consolidate all the devices under one Apple-ID. I have tried to do this going through the manage accoung like, but it timed out - could somebody help, pls

Purchases of multple Apple ID accounts cannot be merged as noted here > Frequently asked questions about Apple ID

Can I make another website using iWeb,then publish it to a different server through the SMTP panel on iWeb

Can I make another website using iWeb, and then publish it to a different server through the SMTP panel on iWeb, even though I have a website published on mobile me, can I just use the SMTP engine to publish a different site but to a different server, that's the question I'm asking. I'm hoping for a quick reply. Thank you for your time in reading this.

Yes. You can do it one of two ways:
1 - select FTP Server in the Publish To menu (click on the site folder to get to the options) and enter the FTP address, username and password and publish as you would if using MMe.
2 - select Publish to Folder and publish. Use a 3rd party FTP client like Cyberduck to upload the site files to there server using the FTP address, etc.
OT

Server crashes after router restarts, different routers, same result!

Hello team,
I've had this problem before, and it's getting really annoying.
Every time I restart my router, my server will crash. It's almost always the case. I don't know why. It's not my router, I have tried 3 different routers. I thought maybe my RAM was faulty, that's not the case either.
Any thoughts?
p.s.
my server always assigns its own DNS address to my clients, so when the server crashes, the clients are left without internet. How can I stop this from happening?
setup: Server 2012 Essentials R2, 2 GB RAM, AMD X2 3800+ CPU.
edit: this is the dump file it generates. I just restarted my router again, and exact same scenario:
http://1drv.ms/1xooykW

Hi MetaLRasaM,
For Bug Check 0xC2, it indicates that the current thread is making a bad pool request. For more details, please
refer to following article and check if can help you.
Bug Check 0xC2: BAD_POOL_CALLER
Would you please check if any drivers need to be updated or any Windows Update need to be installed? Please
run sfc /scannow command to scan all protected system files. Any find? If perform a
clean boot, will the same crash issue still exists?
For Event ID 41, please refer to following KB and check if can help you.
Windows Kernel event ID 41 error "The system has rebooted
without cleanly shutting down first" in Windows 8.1, Windows 8, Windows Server 2012 R2, Windows Server 2012, Windows 7, or Windows Server 2008 R2
As you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Please refer to following articles
and check if help you to analyze dump files.
Crash dump analysis using the Windows debuggers (WinDbg)
How to read the small memory dump file that is created by Windows if a crash occurs
By the way, it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service
and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

My FIOS TV only uses the Coax cable not the HDMI cable

I can only get my STB to use the coax cable to my TV, I want it to use the HDMI cable for a better HD picture, but I do not see a way to get the STB to use the HDMI cable as the primary output. How do I tell my STB to use the HDMI cable instead of the coax? My STB is Model:QIP7100-P2.

Please look at My Images
EQUIP LAYOUT WITH WCB3000N Ntwrk Extender 12 28 2014.jpg
Have been using HDMI input (to my Sony)...with QIP 7100 P1 ...successfully for years
Tom
Freedom Essentials, QIP 7100 1,Bose SOLO TV Sound System,,QIP 7216 P2,M1424WR Rev F, iPad 2 WiFi,iPhone 5,TV SYST INFO Release 1.9.5 Build No. 17.45
Data Object 39.45

What digital coax cable do I need for my sb 5.1 digital (pic attach

http://www.marctv.de/media/soundblaster5rear.jpg
This is my SB Li've! 5. from the back. The black whole is labeled "or digital" .
I have my Z-680 ( 5. Surround Speakers with DD Decoder) attached with 3 x 3.5 mm to have real 5. Sound in EAX Games.
But I want to connect the soundcard with my decoder via the digital coax cable because I do not play anymore.
So what cable do I need to connect my sb 5. digital to my z-680 via coax?
I need a detailed discription so that I can buy one.
And yes, I know that I only have stereo sound when I am not listinbg to a dvd.
But please give me the answer. I could not find it anywhere on the cl homepage.
Is it a 3.5 mm mono to coax? Or what is it's

Yes it's a mono 3.5mm >> RCA adapter (or a stereo 3.5mm >> 2xRCA cable). You need to use the orange socket labelled 'DIGITAL OUT'.

Down payments to different vendors through app (f110)

hi frineds how can i make down payments to different vendors through APP in (f110), where should i configure this settings ? pls help me with t.codes and paths..

SETTINGS:
Usually "F" is used for DPR (DOWN PAYMENT REQUEST) and "A" is used for DP (DOWN PAYMENT).
"F" has as target indicator "A" by OBYR transaction.
POSTINGS:
By F-47 You post a DPR.
During the DPR posting, you have to insert the Target indicator; usually A and the DPR will report F as special indicator. ( Bcoz DPR(F) will target DP, that is A)
Into FBZP --> All company codes --> Sp. G/L transactions to be paid --> if you insert F, the System will take the DPR previously posted during the F110.
But if you posted some DPs, these DPs will not take in consideration by F110.
ALL THE BEST

1310 Bridge RG-59 coax cables.

Hello all, hope everyone is well.
The RG-59 coax cables that come with the 1310 bridge are only 1 foot long. Does anyone know where I could get longer cables as the power injector is quite a distance away because there are no close power sockets. Instead of installing new power sockets near to the bridge, we wanted to simply run longer coax cables.
Hope someone can help!

This cable is standard CATV (cable/dish antenna cable) type RG-6 that is commonly available at any radio or entertainment store - It is exactly the same cable that is used to go from the cable TV receiver to the television - Raw cable and connectors are available from places like Home Depot, Lowes, Walmart etc.
Fred

Representing coax cable in Multisim

I am trying to simulate a 50 ft coax cable connected to a signal generator on the left-hand side and a 50 ohm load on the right-hand side. How would I build this using Multisim?

Hi,
The best option for you is to model the coax line as a 50ohm lossless transmission line and just calculate the delay it will introduce in second. You can use the following formula:
delay time = length of the cable/ TEM velocity (3*10^8m/s)
If you want to include losses you have to calculate the RLCG parameters of the coax cable and include them in the component Lossy Transmission Line.
You can learn more about this here.
I attached a design file that includes these components, always make sure that your load is the same as the transmission line characteristic impedance (matched) to avoid reflection.
Hope this helps,
Mahmoud W
National Instruments
Attachments:
coaxial TL.ms11 ‏113 KB

Why don't match the values of printer ports, obtained through WMI in different ways?

Why don't match the values of printer ports, obtained through WMI in different ways?
$Ports = Get-WmiObject Win32_TcpIpPrinterPort -namespace "root\CIMV2" -ComputerName $ComputerName
$Printers = Get-WmiObject Win32_Printer -namespace "root\CIMV2" -ComputerName $ComputerName
Further, for example, on the same computer $Ports.Name returns me: (10.0.66.204 10.0.66.210 10.0.66.246 10.0.66.247)
and $Printers.PortName (XPSPort: USB001 10.0.66.247 HPLaserJet400MFPM425dn 10.0.66.246 SHRFAX :) I.e. the values don't match to each other although they logically should be the same. Why so?
In the end I need to get a binding the printer - the value (not the name) of the port. In Win32_Printer there is no such parameter, and there is no information about the printer in Win32_TcpIpPrinterPort. I wanted to connect them through port name but they
don't match.

Very unclear.
Win32_Printer returns the bound port name.
Get-WmiObject win32_tcpipprinterport -filter "Name='192.168.1.100_2'"
¯\_(ツ)_/¯

Two different Routers and same subnet, is it possible?

Hi i have been presented with a problem that a friend of mine is having.
There is two different Cisco routers on different location.
example:
router1 : 10.8.10.1 (has DHCP/FTP server)
router2 : 10.8.12.1 (needs to talk to DHCP/FTP server on router1)
the router2 has different ip configured but is it possible to change this to the same subnet as router 1? like 10.8.10.4?
The DHCP/FTP server have been defined with scope 10.8.12.0 and on the Cisco switch on router2 its been configured (ip helper address DHCP-IP)
this works, the clients connected to router2 gets ip from DHCP server ,but there is no FTP traffic.
i figure its because the DHCP/FTP server doesent understand the other IP, so if its possible to setup a kind of mulitVPN to get the same subnet on router2 as router1 the FTP server can "see" the other router2 because it has the same subnet and ip range.
Thank you for any experience, i really stuck on this one

John,
to simply put it having two routers on the same subnet is not possible as the purpose of a router is to route traffic between DIFFERENT networks. In order to accomplish this you will need routers and switches that understand VLANs and VLAN tagging.
Hope this Helps
Blake Wright
Cisco SBSC Network Engineer

My imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

Back up all data before making any changes.
Step 1
Take all the applicable steps in this support article.
Step 2
If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
If the application called "Bluetooth Setup Assistant" is running, quit it.
Step 4
This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Reset the System Management Controller.
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

1 coax cable - 2 different routers through splitter - 2 different IP addresses -- Possible?

Similar Messages

Maybe you are looking for