1 computer and 2 users!! HELP!

Here is the deal. My parents got my an iPhone 3gs for xmas last year. I gave my old iPhone 3g to my dad.. butttt instead of restoring it to the factory settings like i should have i just deleted all of my info from just the phone.. my problem is that my dad does not have a computer to back his iphone up to or upgrade it and wants to. When i plug his phone into my computer it still recognizes it as me and i do not know how to be able to back his phone up and upgrade it without putting all of my info, texts, apps and so forth onto his phone?? can someone pllease help me figure this out because there has to be a solution but no one seems to be able to give me an answer! PLEASE AND THANKYOU!

You can set up each device separately and iTunes will remember the changes made.
Did you already change the name of the device in iTunes by clicking on it in the device list until the name it high lightened? Just as if you're renaming a folder in windows, fill in the new name, and from that point on you can also see the different backups made afterwards in iTunes/Settings/devices.
You can also delete your info on the phone by choosing to erase all content and settings. To do this, go to Settings/General/Reset and tap on Erase All Content and Settings.
More info on that here: http://support.apple.com/kb/HT3828
Remember that apps can only be used with the account thy were bought with. So if you create a new iTunes account for your father, all of your apps can not be used on this phone anymore.

Similar Messages

  • Checking Computer AND User Account against AD without TLS

    Hi Folks,
    i am working on a customer site with 5500/ACS5.2/AD/WZC. The Customer looks for a good Authentication Scenario but decides against TLS. So we tested PEAP with checking the AD for a valid Computer Account and User Auth. But, if i use a Laptop with no Domain Computer Account but a valid User Account, i  can gain Access. Is it possible that the ACS can check for a valid Computer AND User Account and successes the Client only if both Accounts are available and valid?
    Regards, Michael

    Hi Nicolas, thx for this Hint. I did  today the Host Lookup and "was machin auth" thing, but anyway, my own Laptop
    that is not in the Domain can connect with a Domain User ID to the Network. Any Hint or Trick? I saw on other Discussions you referred to that some Users did an AD Rejoin, what do you think?
    Regards, Michael

  • What is the Best Way to Sync iPod nano to a new Computer and User?

    what is the best way to sync ipod to a new computer and user?
    moving from old mac to new mac - same ipod
    - currently won't add music etc. i guess because it is not associated with this new computer
    - i don't care if I dump all old contents - if necessary...
    BTW: what if it's the same username?

    No problem.
    What about when I have the same user name on both old and new computers - and right now the new computer sees/syncs the ipod just fine .... but it seems that on another day it might not allow the sync
    If it's syncing okay already, then you have nothing to worry about. Anyways, why would it change? It doesn't decide when to. It either syncs or it doesn't depending on the situations circumstances, in which your case, you have nothing to worry about because it's already syncing without issues.
    B-rock

  • Cisco ISE - Computer and User Authenticiation on AD for Wireless Clients.

    Hello all,
    I am trying to configure Cisco ISE to authenticate/authorize Wireless access with PEAP MsChapv2.
    The AD user authorization works fine, but I cannot see on the logs a challenge for the computer verification (it must be a domain member).
    I have found an attribute I would use for this action, but I cannot use it, because I don't see the challenge for the computer challenge.
    Can you explain me if this fact is involved by the ISE configuration or by the client configuration ?
    Thanks a lot for your help.
    The followings screenshots show the logs appearing in the ISE :  
    Kind regards, Emeric.

    This is a great question and I wanted to add my input and I have a question as well. My understanding in order to do both Machine and User EAP-Chaining is required, which used EAP-FAST. 
    In my testing, when a domain box is configured for computer/user authentication. When the laptop started up it will authenticate with a host/ and sid in the log.
    When the user logs in you then see the user ID.
    For my benefit when rule are you talking about ?
    Thank you 

  • I just reformatted my Windows XP computer and need help transfering everthing from my iPad and iPhone back into iTunes

    I recently had to format my Windows XP Pro computer and need to transfer all the iTunes information from my iPad1 and iPhone4 back to my PC. I could use some help, everytime I try it it says it will delete everything on my iPhone/Pad and reload everything from the new iTunes (now only 54 songs instead of the 342 that I have on my iPhone right now.)

    You have a backup of your computer, or at the very least of your iTunes media, correct?
    Simply copy your backup of your iTunes media into the iTunes library on your new computer.
    Connecting and syncing your device to the new computer without first recovering your iTunes media is a really, really, really bad idea.  iDevices are designed to ONLY sync with one computer.  When you plug your device into a new computer, it will wipe all media on the device when it syncs.  The only media you may be able to salvage and transfer to the new computer would be anything bought directly on the device.
    If you do not have a backup of your iTunes media, then you will want to look at a way (using software from a third party company)  to extract the media from you iDevice.

  • Radius 802.1x authentication with computer AND users.

    Hi !
    I don't know if what I trying to do is possible so please excuse me if this sounds silly :)
    I have a Cisco Wireless lan manager where I've configure 2 differents SSID's : COMPANY and COMPANY_mobiles.
    What I want is to create a policy to restrict the access to the COMPANY SSID to only my company laptops with authenticaded users (both groups exists in the AD).
    Therefore I created a new policy with the following conditons :
    - NAS Port Type : Wireless
    - Client IPv4 Address : <my cisco ip>
    - Called Station ID : ^AA:BB:CC:DD:EE:FF:COMPANY$
    - Users Groups : EUROPE\MY_USER_GROUP
    - Machine Groups : EUROPE\Domain Computers
    When trying to connect a notebook on windows 7 to that COMPANY ssid, I'm beeing rejected with the following error :
    User:
        Security ID:            EUROPE\HOSTNAME$
        Account Name:            host/HOSTNAME.my.server.com
        Account Domain:            EUROPE
        Fully Qualified Account Name:    EUROPE\HOSTNAME$
    Authentication Details:
        Connection Request Policy Name:    Secure Wireless Connections
        Network Policy Name:        Connections to other access servers
        Authentication Provider:        Windows
        Authentication Server:       My.radius.server.com
        Authentication Type:        EAP
        EAP Type:            -
        Account Session Identifier:        -
        Logging Results:            Accounting information was written to the local log file.
        Reason Code:            65
        Reason:                The Network Access Permission setting in the dial-in properties of the user account in Active Directory is set to Deny access to the user. To change the Network
    Access Permission setting to either Allow access or Control access through NPS Network Policy, obtain the properties of the user account in Active Directory Users and Computers, click the Dial-in tab, and change Network Access Permission.
    It therefore seems that it doesn't match my network policy and falls bacj to the default one.
    If I remove the user rule, and let the computer rule : Connection OK
    If I remove the computer rule, and let the user rule : Connection OK
    but if I put both, i can't connect :s
    Can someone help me with this issue ?
    Thanks a lot !
    Geoffrey

    Hi Geoffrey,
    I would like to know if
    EAP-TLS wireless authentication has been used since it uses user and computer certificates to authenticate wireless access clients.
    Please try to use NPS wizard to configure 802.1x wireless connection,
    and
    you will find that it
    creates new connection request policy and network policy. Network policy NAS Port type will be "Wireless -Other OR Wireless -IEEE 802.11".If
    you
    need filter by user and computer account, the log should show both authenticate user and machine account name.
    EAP-TLS-based Authenticated Wireless Access Design
    http://technet.microsoft.com/en-us/library/dd348478(WS.10).aspx
    Regards, Rick Tan

  • I have a hp a6814y computer and need help with a graphics card

    okay i wanna upgrade my hp with an actual graphics card, so i can play games without it lagging. i mainly play rts games, like command and conquer generals, etc and about to get company of heros. now i need to know what kind of card i can put in this computer. i would like to put this one in 
    http://www.newegg.com/Product/Product.aspx?Item=N82E16814102824
    i hear people say the min is 300watts and some say 450watts. but then idk, if this card can hook up to my power supplie.
    i just need help getting a very good card for this computer without updating the power supplie

    Hi,
    Check with Athena as they maintain a PC Cross Reference list and see if the power supply that you have selected is compatible with your PC.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Rebooted my computer and need help re-installing adobe suite 6

    I bought the student version of adobe suite 6 production premium a few months ago and my computer just recently crash. After I rebooted my computer I try to re-install the program but the student version won't let me install it because it only allows me to use the serial number 2 times. Can someone help me how I can reset my serial number or do something so I can install the prgram again. I need the program soon because I'm falling behind on my work. Thanks!

    Please contact our support team to request that your activations be reset.

  • User and Computer memberships are missing after moving computer and user objects using ADMT

    Hi to everybody.
    Source domain Windows 2003. Destination domain Windows 2008. I use ADMT 3.2
    I have noticed 2 issues:
    1. After migrating users, membership to all Bultin domain groups, is lost. Migration of custom groups is completed without any problems prior to start migrating users.
    a. Example 1: user in source domain belongs to Domain Admins, Domain Users and a custom Domain group with the name Test. After moving the user, the membership is as follow: Domain Users and Test! And the worst of all
    is that I believe that Domain users membership was not produced by the migration but from the AD mechanism that automatically gives every new user the Domain Users membership. Look at example 2.
    b. Example 2:user in source domain belongs only to the Domain group with the name Test. After moving the user, the membership is as follow: Domain Users and Test! 
    2. After migrating a computer account from source domain to destination domain I have noticed in the "Local Users and Groups" that the Domain Admins  membership in the Administrators group is missing. 
    Any ideas? I think I am missing something fundamental here. 
    Thank you all in advance. 

    additionally, from the migration log I see the following
    WRN1:7372 ADMT does not process BUILTIN accounts or change the membership of BUILTIN groups (Administrators,
    etc.).
    there is 1 line of the above WRN for each builtin group that the user belongs in the source domain. This
    means that there I have to do this membership update manually? And what if I have 1500 users and 300 groups? 

  • Help - had to rebuild computer and need help w/ song transfer

    OK, so my computer had to be entirely rebuilt. Everything was wiped clean. I did back up all of my iTunes music files (had to reinstall iTunes though), and I still have all of the songs on my iPod. My question is this: what is the best way to resynn my ipod with my computer? If I connect my iPod to iTunes, will everything transfer from my iPod to iTunes (i.e. will iPod overwrite iTunes)? Just looking for the easiest way to do this - thanks!

    Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
    Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
    Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
    The music files should transfer to your iTunes.
    However it appears that no playlists or any other info such as ratings/last played etc will transfer.
    If this is important to you, you may want to use other options.
    There's Yamipod. This is a free program that transfers music and playlists etc from iPod to iTunes.

  • I'm getting a new computer and need help

    I currently have Elements 5 and CS3 on a laptop running Vista.  I am getting a new laptop with Windows7, and plan to put Elements 9 on it.  I have saved many projects using CS3 and Elements 5.  My question is:  After I transfer my saved projects to the new laptop, will I be able to open them with Elements 9?  If not, what should I do?

    Try:
    - Resetting the iPod. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next try placing the iPod in Recovery Mode and then restoring via iTunes.
    iTunes: Backing up, updating, and restoring iOS software

  • If i sell my computer and want to install cc on new computer what happens to the original download.

    when you buy creative cloud for your current computer. you then upgrade that computer how do you deactivate or transfer the programs from the old computer to your new one. how do you delete or void the creative cloud on the old computer. thank you,

    how do you delete or void the creative cloud on the old computer. thank you,
    Open any Cloud app (e.g. Photoshop) on that old computer and click Help > Sign Out.
    That will deactivate all Cloud apps on that computer.
    The software can remain installed but it will not be usable until someone opens an app on that computer and signs back in with a valid and financially current Adobe ID.

  • My iPhone has two identical options under "iTunes wi-fi sync" that are the same computer. I only have one user on my  computer, and I tried moving my iTunes file in Finder to organize it and now my library's not synced with my phone. Help?

    My iPhone has two identical options under "iTunes wi-fi sync" that are the same computer. I only have one user on my computer, and I tried moving my iTunes file in Finder to organize it and now my library's not synced with my phone. Help?

    I have the same problem. Right now my iPhone 5S shows 3 instances of the computer to which it is connected under Settings » General » iTunes WiFi Sync. I'm having problems connecting and syncing, and this is probably the cause: the phone chooses one of these connections, and it isn't the one that's actually in use. What's probably happening is that the phone and computer establish a connection using a dynamic IP address, the address becomes "disassociated" due to error, another address is associated, the phone retains each address/link, and each link is displayed as if it represents a separate computer (the fact that the name of the computer is identical is ignored, as the only thing that is considered important is the IP address). But that's all conjecture. More important, I'm not sure how to fix the problem. A network reset doesn't do it.

  • I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help.

    I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help. What do i do?

    I have not contacted Adobe. I am using acrobat pro CC, and haven't noticed any problem with the software itself. The only problem I have had so far is when I try to download.

  • I have itunes 12 and protected acc music files will to play- and computer wont authorize- 2 plus hour on phone w/ apple and no help.

    Apple authorized retailer just transferred my data from "dead" late 2009 macbook pro to my new matchbook with retina. Now itunes12 will not play songs listed as protected acc files that i bought from iTunes. so i know what that term means but spent over two hours on he phone with apple trying to resolve with no luck but the rep swears they should play and the protected part is not the issue. Songs were purchased when i had a pc ( he said thats not the issue) and i had no issues with previous computer playing them.  Also when i try to play them now it prompts mo to authorize the computer and it will NOT let me . (not sure if its b.c they were bought when iTunes let you use a user name only and not needing @ .....email address.) And i dont have the password and cant get it though find my apple id b/c its not really a true  apple id- tried adding the @ and my email but tray did not work.
    SO , 1.  Anyone else have this issue or suggestions on what to do? 
         2. was told i need to find old password to authorize computer but cant , as i said , find it though apple id site.....so have no clue whist to do .... already spent 20.00 repurchasing some out of frustration.
    This came to my attention  when i tried to since my phone and was told id loose 60 songs b/c computer not authorized- so i stopped and they play in the phone   then tied to sync iPod and same issue but by accident pressed wrong key and lost songs off iPod that would play on that. so now they are on my purchased list and can see they were purchased with just a same / no address when i fog to about file.....any suggestions. help...please ...was already in the phone with someone various times for total of over 4 - 6 hours trying to fix multiple apple id issue so i could at least back up my phone which is dying so when i get new one if anything goes wrong i have my picts. and music backed up to computer.
    3.last issue -  was told by one person that now i have to either do family share b/c of songs bought with different id's(at that point dint know about first issue but knew i had used @me and @ mac by accident to buy songs and was told they now would not play if i was not signed in with the id it was purchased with?? is that true?
    b/c i have play list for my car that have songs from both ids .....so hen said that would be an issue ? its not now on my phone (old 3GS) they all play.
    any help one anything would be so appreciated! thanks- sorry for so may issues in one question. del free to ask more questions as what I've tried b/c i feel I've done  everything they they told me on phone multiple times and cant get any answers. or get stuck back in loop of need to authorize computer and cant and dante get apple id from forgot password b/c it only gets to second step and then says info is not correct?

    reb101 wrote:
    OK, I finally got it - do the following:
    1. Connect Pre to your computer in USB mode.
    2. Open search feature and search for "ipod controls" file in the Pre drive (on my computer this is drive E
    3. On the search feature, go to advanced tab and tell it to search for hidden files.
    4. It should find ipod controls.
    5. DELETE, DELETE, DELETE
    Keep in mind that this will delete all previously uploaded music installed by using *ughhh* itunes.  I love it.  Now I just drag and drop all music to my Pre drive.  Hope this helps.  It is nice to have a fresh start without having to wipe the entire phone.  Good luck out there.
    This worked brilliantly!!! Thank you so much!! Pre is set......only issue now is that fact that half my music in iTunes is in a Protected AAC file format that the Pre can't play 

  • I need help with closing a running program. It seems like it does not count as a program. Tried to turn of the computer and closing all programs. Please help!?

    I have a problem with a grey text box. It writes and says all i do. For example: When i now write it says all the letters one for one. If i open a new rogram it says so. If i click on something it gives me information about it. I can click the box and drag it, but dont close it. I have restarted the computer and closing all windows and programs. It just popped out when i was pressing some buttons on the mac. I think it is a easy way to fix it, but i cant find out what it is named and search for it. I think it is made for help and i did not download anything to get it. If i change user on the mac it does go away when I am on the other user, but i really want to keep the one i have because off all the settings and programs i have.
    Please reply if you know anything about this.
    This is a printscreen of the box, the language is Norwegian if someone wonder...
    It is really annoying, I hope someone can help me out.

    Oh thanks alot! Really happy that people take the time to answer my `noob`questions! Would not find that out by my own.
    Thanks!

Maybe you are looking for