1. could I connect an external USB3 drive to my macbook pro (15" MID 2010)?

Trying to connect I can't see it.
2. Question: Is it mirroring possible with apple TV on MacBook pro 15" MID 2010?. Playing a movie with VLC can I send it to TV?
Could you please give me an advise?

1. Of course. Your Mac will not work with the external drive at USB 3.0 speed, but you can use it as a USB 2.0 external drive.
2. AirPlay Mirroring needs an Early 2011 or newer MacBook Pro > http://support.apple.com/kb/HT5404 As you cannot use AirPlay Mirroring, you can use an application like AirParrot or Beamer

Similar Messages

  • How to connect 2 or 3 externadisplays to the macbook pro 15" (mid 2010, i7)

    I have a new MacbookPro (mid 2010, i7) I have 2 HP monitors (20") and a big TV (50") I am setting up a classroom. I want to display 1 screen on the TV (which is behind me) mirroring a secondary screen I have in front of me, and also have another secondary screen in front of me.
    So far I tried connecting only 1 HP monitor and the TV connected to an HDMI splitter (after the minidisplay to HDMI adaptor) using an HDMI splitter, and I only get the image on the HP monitor, the TV is black.
    I have been reading about the USB to DVI boxes and they seem to work but not with the latest MacbookPro (i5 and i7).
    Anyone knows how to achieve this setup in my computer (1 HP (DVI) mirrored on a TV (HDMI) and an extra HP monitor (DVI))?
    Thanks

    You will need to talk to the tech support people at Matrox about whether or not you could do what you hope to do with a TripleHead2Go DP Edition. I suspect you would be limited to an undesirably low resolution (1360 x 768 or lower) on all three external displays. I don't know of any other possibility for such a setup, other than running it off a desktop computer with multiple graphics cards.
    http://www.matrox.com/graphics/en/support/gxm/

  • External hard drive to my macbook pro , doesn't work properly.

    i connect my external hard drive to my macbook pro , but it doesn't allow me to drag my documents on to my hard drive , but it works before i upgrade to mountain lion OS X.

    my external hard drive is WD My Passport.

  • Maximum hard drive physical size for MacBook Pro 13" mid-2010 model

    I'm planning to replace the hard drive in a MacBook Pro 13" mid-2010 - its the latest model just purchased.
    I've searched the discussions on replacing the hard drive, and I've seen conflicting information on whether the 13.3" Macbook Pro will accept the 12.5mm height drives, or only the 9.5mm height drives.
    And Apple support is no help - they don't know.
    Can someone confirm exactly, whether the 12.5 mm drives will fit or not?

    Thanks everyone - it looks like you've answered my question, and I'll mark it as such.
    I think that my confusion is related to the mac terminology that you guys are using that I am not familiar with yet - I'm brand new to the world of Apple and Macs, so I've got a lot to learn ahead of me.
    "S.U.", you said "The 12.5 mm drives will fit in all unibody MBP's". What is a "unibody" MacBook Pro? The one I have is the aluminum shell, not the older black or white case that appears to be some sort of plastic.
    In another thread, you mentioned that you have 2 drives in your MacBook Pro. Is there really room for more than a single drive inside, or did you have to remove the optical drive and put the second drive in its place?
    "eww", you mentioned "And it doesn't affect the computer's warranty". When I talked with Apple support about replacing the drive, they said that there are no user-serviceable parts in a MacBook Pro, and it might void my warranty to replace the hard drive. I pointed out that they have several documents at the "Manuals" section of their website, explaining the exact steps to replace the hard drive (as well as memory and battery too), with no mention of voiding the warranty.
    Is Apple support always so out of touch with their own web site and their own equipment/policies, or are they usually quite knowledgeable and helpful? I'd like to think that I can count on them when I have questions harder than "where's the ON button". But to their credit, they did mention that I visit these forums to see if anyone here could help.
    "OrangeMarlin", you mentioned cloning the old drive first, and I plan to do that. The MacBook Pro is brand new, and has not been used yet, so there is no user data to be lost yet, but it would still be easier to clone the drive than try to install from scratch and hope that everything gets installed the same way as the factory drive came packed with.
    While on the topic of cloning the drive and backups, I have plenty of external drives to do backups onto, but how do I go about doing backups/cloning? I've heard of "time machine", but it looks like I need a whole dedicated hardware system of some sort in order to use it? Or can I use it with any external hard drives? Or is there a better/preferable backup tool to use, and does it come with the mac, or must I get it separately?

  • Can anyone make a recommendation on the purchase of an external hard drive for my Macbook Pro? I am currently using OS 10.6.8 because I can't upgrade until I clean out my start up disc space. I have a ton of pictures to transfer. Thanks!

    Can anyone make a recommendation on the purchase of an external hard drive for my Macbook Pro? I am currently using OS 10.6.8 because I can't upgrade until I clean out my start up disc space. I have a ton of pictures to transfer.Thanks!

    best options for the price, and high quality HD:
    Quality 1TB drives are $50 per TB on 3.5" or  $65 per TB on 2.5"
    Perfect 1TB for $68
    http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
    Nice 500gig for $50. ultraslim perfect for use with a notebook
    http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
    2.5" USB portable High quality BEST FOR THE COST, Toshiba "tiny giant" 2TB drive (have several of them, LOT of storage in a SMALL package)    $117
    http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
    *This one is the BEST portable  external HD available that money can buy:
    HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
    http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
    Most storage experts agree on the Hitachi 2.5"
    Hitachi is the winner in hard drive reliability survey:
    Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

  • What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro?  I need to transfer files from the old hard drive to the new computer.

    What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro?  I need to transfere files from the old hard drive to the new computer.

    No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
    I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
    I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
    synghem wrote:
    Thank you LowLuster,
    At the apple store they said I needed an esata to usb wire.  But looking at wires on line has been confusing.  Is sata the same as esata?  How do I know if I need a usb 3 or usb 2?

  • Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

    macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

    If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
    It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
    Good luck - take the issue as high up the food chain as you can and see what happens.
    Clinton

  • How can I move my project from external hard drive to my macbook pro?

    How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance

    Try here...
    Setting-up a new Mac from an old one, its backups, or a PC

  • Can this device be used as an external hard drive with a macbook pro laptop to use files on the airport?

    can this device be used as an external hard drive with a macbook pro laptop and use files on the airport time capsule?

    If you mean an AirPort base station other than the Time Capsule, it doesn't have internal storage.
    If you mean a Time Capsule, its internal drive can be used for regular file storage but shouldn't be; as with all drives, it'll eventually fail. You're better off using a standalone drive and setting Time Machine to back it up as well.
    (112309)

  • External hard drive compatible with macbook pro 10.5.8

    external hard drive compatible with macbook pro 10.5.8, i need a hard drive that will work with 10.5.8 to back everything up before upgrading to 10.6. a hard drive that is compatable with 10.5.8 has been impossible to find, a hard drive that works with both opperating systems is what i am looking for, any information that can help is appreciated

    You can buy just about any USB2.0 hard drive and use it with your MacBook Pro.  Many older external drives come pre-partitioned and formatted FAT32 for use on Windows.  Your Mac can use that file system as well, but it has limitations on file sizes.  You can always re-partition your external drive and re-format it as HFS+ (MacOS Extended Journaled) then your old Mac OS version and your new one should both be able to access it just fine.  One thing to keep in mind is that many older OSes don't really handle drives larger than 2TB well, so you would probably want to try to keep your external drive to something smaller than 2TB...

  • How do I a setup an external hard drive on my Macbook Pro?

    How do I a setup an external hard drive on my Macbook Pro to my primary hard drive for my iTunes library?
    I ask this because every time I try to do this it my Mac book pro always wants to use the external hard drive I plug in as a time machine back up rather than my primary hard drive. I figured it would be cheaper and more efficient to use an external hard drive rather than have apple charge me an arm and a leg to replace and upgrade my current hard drive in my Mac book pro.

    I responded to this in your duplicate posting at: http://discussions.apple.com/thread.jspa?threadID=2690347
    I recommend giving a first post a chance before posting a second time, especially since it may result in a lot of duplication in effort from the people volunteering their time here.

  • How do I transfer an imovie from an external hard drive to my macbook pro iMovie 9

    How do I transfer an iMovie from an external hard drive to my macbook pro iMovie 11?

    The easiest way would be to just attach the external drive to the MacBook Pro. iMovie should see it next time you open iMovie.
    If you are going for portability, you can attach the external drive to the MacBook Pro. Then open iMovie.
    Then click VIEW/EVENTS BY DISK. You should see your external drive listed in the Project Library and the Event Library.
    To make a COPY just drag the icon for your project to the icon for the external drive in the Project Library List.
    To MOVE it, hold down the command key while you drag.
    If you want to edit the project, you will also want any Events, Photos, or Music referenced in the Project. To get those, click on the Project to select it (it is now on the MacBook Pro) and click FILE/CONSOLIDATE MEDIA.

  • How Can I Connect 2 External Display Monitors to a MacBook Pro? Help

    I want to know if I can (and How to) connect 2 external display monitors to a MacBook Pro... late 2006 & the new Unibody MBP.
    I'll appreciate

    Requires additional hardware - the Matrox DualHead2Go. For the late 2006, you'd need the DualHead2Go Digital Edition, and for the unibody you'd need the DualHead2Go DP Edition, with appropriate cabling (and a DVI-to-VGA adapter for the late 2006 MBP).
    http://www.matrox.com/graphics/en/products/gxm/dh2go/

  • Macbook Pro (13" mid 2010) unable to connect to home wifi?

    Hi everyone
    I have a Macbook pro 13" mid 2010. Up until recently, airport was able to connect to my home wifi. I have not changed anything on the home wifi network.
    The laptop is on 10.6.8, with all software updates installed.
    I have recently installed boot camp onto this laptop and did a software update. Could that be a problem?
    Attempted solutions:
    1 PRAM reset
    2 Disabling IPv6
    3 Reboot laptop and restart modem/router
    4 Deleting all keychain networks and passwords
    5 Deleting networks from Network Settings/Advanced Settings
    6 Using Assist Me option
    7 Changing home wifi network from WPA to WPA2
    8 Changing home wifi broadcast channel to a less used channel
    9 Connecting to another landline network (also did not work)
    Surprisingly, I am able to connect to my mobile phone's wifi tether. My monthly data usage limit isn't very high and this isn't a real option.
    Normally what happens, is I enter the password to join the wireless network and it'll give me a Connection timed out error message.
    I have 5 other PCs in the house that can connect to the network, my MBP is the only mac and the only one that cannot connect. My android mobile phone can connect, my sister's iPhone 3GS can connect.
    Can anyone help? Or suggest something I may have missed?

    I have the same MBP Version 7.1 that you have and it also states in the System Profiler HDMI Display port
    Output: Connection : Display. Now what that means, im not sure.
    But i have also connected an HDMI cable via an adapter made by iWires Tech Link purchased at the Apple store and have the same problem as you, only video with no sound from the TV.
    I've looked at the settings that eww has suggested in System Preferences > Sound > Output tab and their is no options available for HDMI out, or Display Audio or anything else for that matter, except built in speakers, and Audio port for sound output.
    Which lead me to use the Audio port to send the sound out via an amp and speaker system independent to the TV.
    Thats why i researched for the other adapters which send out the sound and the audio through the same adapter.

  • Can i install samsung 850 pro 1 tb solid state drive in my "macbook pro 2012 mid".

    Hi, anyone know. can i install samsung 850 pro 1 tb solid state drive in my "macbook pro 2012 mid". any compatibility issues?

    "In addition to TRIM, I just stumbled on this discussion. One of the posters is having some odd difficulties with that combination."
    Yup and that's why I've avoided any 3rd party SSDs.
    I only deal with:
    http://eshop.macsales.com/shop/SSD/OWC
    I've done 6 so far and no problems at all; formatting, installing nothing. Total no brainer. I did have a small formatting problem on my last one but I called them and solved the problem before the guy got on the phone. He immediately offered a return sticker (RMA) but I didn't need it and the MBP is running fine.

Maybe you are looking for

  • Original Mac Mini with Samsung P2770h LCD

    Yesterday I picked up a Samsung P2770h from CostCo. Swapped out my old Viewsonic 22" LCD and it worked perfectly on my Windows 7 system, but not my Mac. I've tried booting in Safe Mode, but nothing appears on the display. I've tried DVI-DVI and DVI-H

  • Mail adapter in PI 7.1 - dynamic attributes

    Hi all, I'm using dynamic attributes to set the header values for the outgoing mail in a message mapping. Sometimes there can be several mail addresses. Are there any limits to how many receivers I can send a mail to, i.e since I concatenate the mail

  • Site Studio : Search Fragment

    Hi ! I am designing a small sample Web Site for a POC and I need to integrate search capabilities. I am using Content Server 11g and Site Studio Designer (not JDevloper / SSXA) I have added the Search Box Plain Fragment and the Search Result Plain fr

  • Business Partner ID in Org structure Not generated

    Hi, when i am creating a New Department(Org.unit) in My Org Structure ,system is not generating a Bussiness partner ID number. If system is not generating the number will there be any problem if i move ahead. do let me know why system is not generati

  • Infospoke/Open hub services

    Guys, I am having problem with creating open hub services.  I have to push the data out to csv file.  I have been able to give it a name and see the field but what is next?  Is there something that I need to push to trigger it to create the file with