1.     Defining dependencies between Work order operations and Isolation Operation Steps

Hi All
Will you please let me know how i can define dependencies between Work order operations and
Isolation Operation Steps? Suppoose I want to have WAP--->WCA-->WCD at operation level, is it possible? Can we have the Switching of Status & allowing that perticular operation for releads. e.g. I have operation 1 in Maintenance WO Which needs machine where only operational control panel to be Locked & tagged. No Need to Tag total machine. So once i complete complete the taging for it & once give permits for it, system should permits only that much operation. Not all operation which may have some other permits which needs to be issued.
Regards
Makarand      

Hi All
Will you please let me know how i can define dependencies between Work order operations and
Isolation Operation Steps? Suppoose I want to have WAP--->WCA-->WCD at operation level, is it possible? Can we have the Switching of Status & allowing that perticular operation for releads. e.g. I have operation 1 in Maintenance WO Which needs machine where only operational control panel to be Locked & tagged. No Need to Tag total machine. So once i complete complete the taging for it & once give permits for it, system should permits only that much operation. Not all operation which may have some other permits which needs to be issued.
Regards
Makarand      

Similar Messages

  • Different between work order closed and completed

    HI experts
    I would like to know what is different between closed work order and completed on SAP PM Module.
    regards
    nasser

    See this conversation:Completed is technical comptete (TECO) - the technician has done his/her work, closed is settled and done also from an accounting perspective (settlement)
    PM Work Order TECO and CLSD
    http://scn.sap.com/thread/3158261

  • Relation between Maintenance Order No. and Operation Number

    Hi all,
    I have to make a module pool in which i want to display the following field
    Order No.                                               
    Operation no. | Operation Description |
    Now my problem is that i m not getting the tables from which i have to select data basically i want to extract the data on the basis of Maintenance Order No. and Operation Number.
    I have checked the following tables
    AFKO , AFVu , AFVC, CAUFV.
    But i m not able to find any relation between Maintenance Order No. and Operation Number.
    Please help!!!
    Thanks and regards,
    Rachit khanna

    Hello Rachit,
    The relation is as follows
    AFKO-AUFPL (Routing number is Order header)
    Use this routing number to get operations from AFVC
    AFVC-VORNR gives operation number
    AFVC-LTXA1 gives operation description
    For sub-operations, VORNR will be sub-operation number, and AFVC-SUMNR for this sub-operation corresponds to the respective superior operation(refers to AFVC-APLZL).
    AFVC-APLZL is a unique number for each operation.
    Hope this helps. You can check with some existing/new orders as well.
    let me know if you need anything about split operations as well.
    Best Regards,
    Subhakanth

  • Assign equipment to work order operations

    What configuration is needed to be able to assign a equipment to work order operation ?
    I already have few equipments assigned to a work order (displayed on the objects tab) but I need to assign some equipments to certain operations.

    Sveinn,
      You would need to be in ECC6.0 to be able to do this. This should be available through SPRO under PM> Maintenace and service processing > Functions and setting for order types > Define notification and order integration.Within this you would need to enable the assignment of operations to object list for specific order types.
    Hope it helps.
    Regards
    Narasimhan

  • Work Order Operation Duplicated on Operation/Activity Number

    I had a coworker duplicated his activity number on a operation. He hit save after he had changed the operation number. Now it is giving an error "Inconsistent data: Order 20066826 02/11/2008, duplicate entry U 0125. This had only happened once before and I tecoed/business completed the work order. Then told them to create a new order. But this one, has important information in it, so I was asked to save this order.
    Any way to renumber the operation or delete it, or just get in the work order itself? I get this error in change or display.
    Thanks

    What you describe should not have happened, and in 11 years of consulting on SAP Plant Maintenance I can only recall having seen this kind of problem once previously. It's not a very easy problem to resolve. There are a couple of suggestions I can make, neither of which are particularly easy or straighforward:
    1. Raise an OSS message with help.sap.com to see if they are aware of the problem and have an ABAP that you can download that will correct or delete the database entries. I have done this successfully previously but whether they have an off the shelf solution for this will depend on which version you are on and which tables have corrupted entries in them.
    2. Get an ABAPer to look at the problem and produce an ABAP program to correct the entries internally. It wouldn't need to be a particularly complex program, only a few lines, but some analysis would be needed to ensure that all of the affected table entries are corrected as the work order operations are split across several tables.
    Sorry but there is not really an easy answer to this one.

  • How to regenerate COSS table for work order operation planning hours

    Hello,
    I am looking for a SAP report or a custom solution to update the table COSS table from work order operation hours. Several work orders incorrectly updated in the table COSS with result the cost is incorrect.
    For example: In the work order opertions, I have  planned 2.5 hrs and in the table COSS it is 1.5.
    Much appreciate for your help
    Bill

    It is quite simple actually.
    As soon as your array exceeds SDU (defaults to 2048), sqlnet will fragment the packet. (see: sqlnet more data to client messages in your trace file)
    As soon as the packet is bigger than your NICs MTU, the NIC will fragment the packet.
    So, depending on the number of bytes for 1 record, high array size make sense or don't make sense.
    And ideally SDU should be a multiple of MTU.
    So do high arraysizes make sense? Usually not.
    Hth
    Sybrand Bakker
    Senior Oracle DBA

  • Difference between work bench request and customizing request

    in abap point of view please give me the difference between work bench request and customizing request

    In simple terms -
    Work bench Request is used by ABAPer.(Creatation of Programs, TCodes or ABAP Dictionary Objects)
    Customizing Request is used by Functional Consultants. (Used to configure the system as per clients Business requirements).
    The Change Request is that request when you do some thing new in customizing or configuration in the system. The system will automatically pop with the change request pop box , when you can give request name as defined by the system or can give your own request name with heading of what changes you have made while customization. The system will generate a request number and you save it. (e.g.:- VEDK-2785467) VEDK- means the Clients System name then followed by the system generated request number.
    Now when you want to release the request you have to use the T-code SE10 where you can see the requests under the heading modifiable or released. Go to the modifiable option. Each request will have again an internal request number. First you have to release the internal request and then release the external request number. This will in turn released by the basis guys thru the T-code SM64 in a group when all the requests are pooled from different users.
    The task which you have mentioned in your question is nothing but the what task you have performed while customizing the client system and the heading name which have given it for that task and generated a request for that task.
    Change Request Management ...
    http://help.sap.com/saphelp_nw04/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
    Creating Change Request Management
    http://help.sap.com/saphelp_nw04/helpdata/en/42/157408dd674a9cbc099f634e9bd069/content.htm
    Change Request
    http://help.sap.com/erp2005_ehp_02/helpdata/en/e5/e5bc42348a43fba6f1b390fc8c4b36/frameset.htm
    Customizing Request:- which will be used when any customization changes are doing.
    Example:- In your standard Tcode always you cannot find all the fields or options, if you want to enable/disable some fields, in this case it will be treated as Customizing request, any customization will comes under this.
    Work Bench Request:- for new developments like new reports, BDC....etc, then Work Bench Request will be used.
    Reward if useful.

  • Open Work Order report and shortage report

    Hello,
    First of all, I am very new to SAP and sap forum. I do need to learn SAP very fast. I work as Buyer and Planner. I would like to know how do you run open work order report and also how do run shortage report.
    I appreciate different feedback.
    Thanks
    Raj

    Hi,
    Use tcodes CO24. First you need to activate that report PPCOXPR1 in SE38 enter report name and execute
    In COOIS select list components you can be requirement qty and withdrawn qty , here you can find out open work orders also
    Thanks
    Diwakar

  • BAPI/FM Help Needed for PM Work Order Update and Notification create

    Hi,
    I am using BAPI - BAPI_ALM_ORDER_MAINTAIN to update the work order details and create notifications for the object list but i am getting errors in doing that.
    IWO_BAPI 203 -Changing the execution factor in the BAPI is not supported
    And i have to create notifications to each object in the object list. This BAPI is not supporting that.
    So i used another BAPI BAPI_ALM_NOTIF_CREATE to create notification and passed the order number , counter etc to it but in the order it is creating a new row for that equipment and linking the notification to it.
    Need some help on these.

    Dear
    1. If you want a Notification mandatory to be created for Order using IW31 you can once make this happen by User Status in Order ,   i would suggest if you are doing implementation better Use Order Types  which has got Notification integrated in it .
    Check Order type PM05 in Ideas server you have PM05 Order with notification fields integrated , which created notification in Background when order is Created or released.
    2.For Work Order B --> Notification A , Not Allowing I donot have any idea check whether is there any User exit from experts or ask ur Abaper
    Regards,
    Edited by: Srinivas Narayana Gowda on Jun 11, 2009 1:10 PM

  • Use of field 'StartPoint' in work order operation's 'Dates' tab

    Hi,
    Can someone please explain me on the uase of field 'StartPoint' on work order operation's Dates tab.
    Regards.

    Start point will be used in case of scheduling for the operation.
    By mentioning the condition & date, while doing automatic scheduling, system will change the start date of the operation & correspondingly finish date.
    Note: This will work only when Automatic scheduling is ticked for the control key.
    Regards,

  • Link Between Sales Order Type and Customer/Material Exclusion

    Hi,
    Any one know the  Link Between Sales Order Type  and Customer/Material exclusion tables (Transaction: VB03 ) ?

    Hello,
    For Tcode VB03 you can check KOTG001 for Customer/Material.
    Thanks &Regards,
    Abhijit

  • Work order operation number in Production Scheduling

    Hi,
    We are using production scheduling for scheduling the discrete jobs. In production pegging view, the work order operation is shown in number "xx:xx:xx:xx:xx" not the name of the operation. Is there any setup required to display operation name? Any patch required?
    Thanks,
    Anitha.

    Hi,
    I have face similar issue in deleting PO line items.
    Even though I delete items, system check budget for deleted qty with the currency conversion + value & gives budget exceed error.
    In some cases we have asked user to deactivated AVAC asked to do the transaction, which is not recommended.
    You can try running CJBN & CJBV in sequence for affected WBS.
    Thanks & reg,
    Sam

  • Difference between Fixed order qty and Fixed Lot multiplier

    Hi All,
    Can someone explain me the difference between Fixed order qty and Fixed Lot multiplier in general planning tab at item level with example.

    Hi,
    Thanks for the reply. Just bit more clarification i need to understand the difference.
    Like for example let us assume two cases.
    Case 1:- order less than Fixed order qty (Fixed order qty =50 and the FIxed lot multiplier =50)
    Let us assume that we have set Fixed order qty equal to 50. We have a physical order of 40 then still MRP will place a order of 50 only. In case of tumhi snagaSame is the case of Fixed lot multiplier it will place a order of 50
    Case 2:- order greater than Fixed order qty (Fixed order qty =50 and the FIxed lot multiplier =50)
    Let us assume that we have set Fixed order qty equal to 50. We have a physical order of 60 then still MRP will place a order of 50 twice. Same is the case of Fixed lot multiplier it will place a order of 100.
    eventually we are doing the same in both the case so what is the exact differnece.

  • Create a Link between Work Order and Reapir Order

    IREAPIRORDER is the reapir order(IW54)
    AUFNR is the work order (IW31)
    w_relation = 'VONA'.
    fs_obj_rolea-objtype = 'BUS2032'.
    fs_obj_rolea-objkey = REAPIRORDER.
    fs_obj_roleb-objtype = 'BUS2007'.
    fs_obj_roleb-objkey = AUFNR.
    CALL FUNCTION 'BINARY_RELATION_CREATE_COMMIT'
    EXPORTING
    obj_rolea = fs_obj_rolea
    obj_roleb = fs_obj_roleb
    relationtype = w_relation
    IMPORTING
    binrel = fs_binrel
    TABLES
    BINREL_ATTRIB =
    EXCEPTIONS
    no_model = 1
    internal_error = 2
    unknown = 3
    OTHERS = 4.
    CALL FUNCTION 'BINARY_RELATION_CREATE_COMMIT'
    EXPORTING
    obj_rolea = fs_obj_roleb
    obj_roleb = fs_obj_rolea
    relationtype = w_relation
    IMPORTING
    binrel = fs_binrel
    TABLES
    BINREL_ATTRIB =
    EXCEPTIONS
    no_model = 1
    internal_error = 2
    unknown = 3
    OTHERS = 4.
    The link is not getting created

    Please go through this link:
    /people/rammanohar.tiwari/blog/2005/10/10/generic-object-services-gos--in-background
    Please give me reward points
    Thanks
    Murali Poli

  • Define dependencies between Change Request (Workbench or customizing)

    Hi there,
    supose I have 2 Workbench request. It is possible to define a dependencie between them?
    The idea is to force SAP to transport both in certain order so I can avoid integrity problems.
    Thanks.

    I doubt if we have anything like this.... rather than having a documentation in the Tr. req and asking the Basis team to have a look at those notes.

Maybe you are looking for