1 distinct type of ORA- errors - "How to get error message"
How do I configure Grid Control to send the full error message on the "Generic Alert Log Error Status" alert instead of just having it tell me there has been an error found?
You need to add the rule:
Click
Preferences
Rules
Database Availability and Critical States, Click Edit
Metrics, Add.
Select: Generic Alert Log Error
Continue ... etc .etc
Hope this helps
Daryl
PS. I remove the Generic Alert Log Error Status -- dont need that extra email -- its useless.
Note too that you have to clear these alerts manually via the "Clear Alert" button or do a whole wack of them via the Alerts->Warnings tab, the select all, clear.
Similar Messages
-
Not clearable : 1 distinct types of ORA- errors have been found in the alert log.
( Correct me if I'm wrong.)
What could be the reason for the fact that the event "1 distinct types of ORA- errors have been found in the alert log." is not clearable?
Even if the problem is solved, the ORA- error will still be in the alert.log.
Therefore the event would eventually only disappear after 7 days.
Doesn't sound very logical to me.- The event page showing a warning event for "Generic Alert Log Error Status" metric,
- "Generic Alert Log Error Status" event is a statefull metric,
- On each evaluation of the metric defined as 'Statefull', the Cloud Control Agent recalculates the severity,
- This means, EM Agent scans the alert log for ORA errors, "Generic Alert Log Error Status" will return the number of ORA error found,
- Whenever the returned number is grater than the assigned thresholds of "Generic Alert Log Error Status", an alert is raised on EM console,
- On the next scan of alert log file, this alert will be cleared ONLY if the collected value is less than the assigned threshold,
- By checking your system, the warning threshold of "Generic Alert Log Error Status" is 0, so whenever a single ORA error is found in alert log, a warning event will be raised and you will not be able to clear it manually as this is a stateful metric.
There are three cases where this alert can be cleared:
1. The agent found 0 ORA errors in Alert log, then the alert will be cleared automatically
2. Manual clear: By disabling/enabling the metric
3. Manual clear and further not receiving similar alerts frequently: By assigning higher thresholds values
So, I suggest to disable the metric, then, enable it after some time as follows as follows:
- Go to the problematic database home page >> open the 'Oracle Database' drop-down menu >> 'Monitoring' >> 'Metric and Collection Settings',
- Choose 'All metrics' from the 'View' drop-down list >> search for the 'Generic Alert Log Error Status' metric,
- Click the pencil icon under 'Edit' column opposite to the above metric >> remove the Warning Threshold (make it empty) >> 'Continue' >> 'OK'.
- Wait for the next collection schedule in order for the warning events to be cleared, then, enable the metric again with the same steps (setting Warning Threshold=0).
References:
Note 604385.1 Receiving "Clear" Notifications Unexpectedly for 'Generic Alert Log Error Status' Metric
Note 733784.1 What are Statefull and Stateless Metrics in Enterprise Manager - Explanation and Example
HTH
Mani -
In the passed I used an Oracle site with a description of all the ORA error messages. Now I can not find this site anymore. Does anyone know the link to this site?
kind regards,If you are searching for a specific error message you might try
http://otn.oracle.com/pls/db92/db92.error_search?remark=homepage&prefill=ORA- -
How to get automatic message output
Hi,
How to get automatic message output while creating po cause i have done all setting in the config but still it does not work what else i have to do.
And 1 more thing how we can maintain condition record for Printoutput & External send for one output type.
Regards,
AnantHi,
Please follow the below steops for the Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type, Purch. Organization, Vendor
2. Access Sequences
SPRO -> -> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
*4. Message Determination Schemas*
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data-Messages- MN04
Here you can maintain the condition record.
All above steps u can do from transacton NACE also
now when u create po in the messages u will get the out put method as u have maintained in the above steps.
Regards,
Manish -
Before page refresh how to get alert message
Hello ..
If user refreshes webpage then from flex side how to get alert message.
Thanks in advance.If you don't want it to say "Microsoft Internet Explorer," you can use a different browser. :-)
But, seriously...
If you really want to customize the appearance of a dialog, you can make one with DHTML that looks like anything you want. You can make it look like a system dialog if you want, but you don't have to. (In fact, if you make it look like a Windows dialog, it will stick out like a sore thumb if someone is using another OS.)
I had to create some of these for an online testing application I wrote, because they wanted the tests to be timed, and I discovered that, in Internet Explorer, you could stop the clock just by opening certain dialogs, so I had to suppress "right-clicking," remove the menu bars, and use custom dialogs to communicate with the user. Since then I've re-used these dialogs in a number of other projects. They're pretty handy. -
How to get Mac Messages to NOT save chats?
How to get Mac Messages to NOT save chats?
I went through the Preferences but I do not see where I can check/uncheck save chats. Will someone help direct me?Hello mayonnaise18,
Thank you for the question. You can disable the option to save chats in the Messages tab in Messages>Preferences:
Automatically save conversations when you close them
Choose Messages > Preferences, and then click Messages.
Select “Save history when conversations are closed.”
These steps are to enable the option to save messages, but you would want to uncheck the option to "Save history when conversations are closed." You can find the full article here:
Messages (Mountain Lion): Save conversations
http://support.apple.com/kb/PH12012
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Cannot find tnsnames.ora error message
We are using oracle 10.2.0.1 via Toad. I get a cannot find tnsnames.ora file error message and see only a tnsnames.ora file in the sample file under the c:\ORACLE\product\10.2.0.1\NETWORK\ADMIN\ directory.
Do I need to create this file, and if so how do I do this?
Thanks in advance for your help
regards,
user12943453Do I need to use the TNSNames Editor? No need for tnsnames.ora or SQL*net to access local DB
Can I just use direct connect and the sqlnet editor?YES! -
ORA- Error messages in Oracle Alert File
Hello Gurus,
In a SAP - BW system installed on Oracle 8.1.7.4, there were some oracle errors entries as follows;
Fri Nov 3 02:13:32 2006
Errors in file /oracle/<SID>/saptrace/background/p001_14866_<sid>.trc:
ORA-00603: ORACLE server session terminated by fatal error
ORA-00052: maximum number of enqueue resources (8000) exceeded
ORA-00052: maximum number of enqueue resources (8000) exceeded
How fatal is this error? how to make sure this doesnt happen again and anyone can share the SQL command to see how many ENQUEUE_RESOURCES are being used?
If i have to increase the enqueue, where and how to do it?
Thanks in advance for your help.Hi "Basis Learner",
1. Oracle 8.1.7 is out of date! It's not maintained anymore.
2. You don't need SQL to tell how many enqueue resources have been used here. The message is clear: 8000. The current maximum. Not a single one more and no less.
3. Well how many more you'll need is hard to tell. But oviously more. Try with plus 50% -> 12000.
Since the process that died here had been a paralle query server process, it may also be the case, that you've configured too many parallel servers. As they run at the same time (parallel) they'll make use of enqueues at the very same time...
4. Of course there are notes:
398927 - ORA error as the dimensions of the parameters are too small
745639 - FAQ: Oracle enqueues
632427 - Oracle 8.1.7* database parameterization for BW
Hope that helps.
KR Lars -
Wrong type of file error message PSE 7
Error message in PSE & when I try to open images I saved. Wrong type of file, cannot be opened. Tried to remove the read-only in properties but still cannot open .jpg images. Can anyone help? Photo attached.
I do not see any attachment.
-garry -
We're using 6i, and I'm trying to find the pl/sql error messages, such as ORA-04098. I can never seem to find these and searching on them is no help. Can you point me in the right direction?
Thanks,
TomOracle's messages are listed in the 'Oracle9i Database Error Messages' manual. Also available at:
http://download-west.oracle.com/docs/cd/B10501_01/nav/docindex.htm -
ORA Error Message on Tablespace
just tried to run the following program and was given an error message. Please let me know what this message means.
Wrote file afiedt.buf
1 select pers.person_id,
2 pers.profile_person_id profile_id,
3 yrs.deg_sought_by_fellow_code x123,
4 yrs.fellow_deg_1st_code x124,
5 yrs.fellow_deg_2nd_code x125,
6 pers.ssn
7 from persons pers,
8 project_years_t yrs,
9 project_versions_t vers,
10 person_degs_t degs
11 where (pers.PERSON_ID = degs.person_id
12 and vers.APPL_ID = yrs.APPL_ID)
13 and pers.person_TYPE_CODE = 'PI'
14 AND yrs.admin_phs_org_code = 'AA'
15 and degs.deg_seq_num in ('01', '02', '03')
16 and yrs.activity_code IN ('R01', 'F32')
17 AND vers.fy = 1998
18 and vers.LATEST_ENCUMBRANCE_DATE is not null
19 and yrs.SUBPROJECT_ID is null
20* and vers.calculated_TOTAL_cost_AMT > 0
SQL> /
from persons pers,
ERROR at line 7:
ORA-01652: unable to extend temp segment by 128 in tablespace TEMP_02
nullYour querry asks for joins and at times optimizer choose sort merge joins as efficient way of executing querry. Now sort merge joins are done using SORT_AREA_SIZE but if that is not enough then disk writes take place. In this case temp tablespace is used and this message is displayed when that tablespace runs out of space.
-
I am hoping to find a single source for the description of all error messages. Does such a document exists and where might I find it?
Thanks.Oracle's messages are listed in the 'Oracle9i Database Error Messages' manual. Also available at:
http://download-west.oracle.com/docs/cd/B10501_01/nav/docindex.htm -
How to get a message in a view which was raised in another view?
Hi All,
I have used the view manager message serviice to add my custom error message in BT126H/Apptdetails view. So if the validation fails then the message is displayed on the screen . But when I am saving the transaction the error message is getting disappeared and I am able to save the transaction. So just before saving ie in the method EH_ONSAVE in overviewset view I will query that message but as it was added in the appt details view I am not getting that message in overview set .
Can anyone tell me how can I get that particular message in overview set?
Thanks and Regards
Swetahi,
In your Subinventory LOV add Bin variable using it Query tab. which has Bind VAriable And View Criteria section.use Bind Variable section. those are in the view object level.
then your all lov include view object select and choose it View Accessors section. it has your lov and Edit your Subinventory LOV and then popup dialog box. Inside it you can make Inside Parametor section select relevant bind variable name and it need value.
thaks. -
How to get the message Sender's information in MSMQ?
Hi, everyone
I am going to develop a Windows server to monitor the messages in MSMQ. Now I wanna get the message sender's name(that is the API of this message, like class name or function name of who send the message.) I make a simple demo and it can easy to get
the message body. But is it possible to get the sender's info by using any MSMQ method ? Looking forward any answers. Thanks so much.
Shuo LeiHi,
Sender object is type of object any time if you want to use any property/attribute of sender object first you need to type cast it with your desire object.
For more information, you could refer to:
http://blog.jsinh.in/managing-msmq/#.VPe5mnkfqM8
http://forums.asp.net/t/343932.aspx?How+can+I+get+values+of+sender+object+in+C+
Regards -
How to get flagged messages in to tasks or alternatively view another users to do list.
If someone could just help me out I would be extremely appreciative.
2 of us work in one mail box together called admin. when one of us is away we like to use the flags to create follow ups for each other on certain email items.
Firstly, I can only see my main accounts to do list
Secondly, when I flag a contact / message / anything in fact, in any mailbox it only appears in their respective to do lists and not in their tasks. Thus I cannot see what I have flagged for them at a glance as I can not find a way to view other peoples
to do list. i.e. neither of us can see any of the flags in the shared mailbox we use (admin) unless we log in under a different profile, which is troublesome as it takes way to long to switch back and forth.
I presently use colour categories to delegate who is currently in charge of answering certain emails and use custom flags to note what we are waiting for in particular to a certain email and then mark a tick when it has been dealt with. Simple system but
not currently working in full due to the follow up flags not appearing in tasks.
This also affects my task synching on my mobile where once again it only shows what is in tasks... i.e stuff I have physically typed in outlook rather than flagged content; mails, contacts etc.
Any ideas how to get the follow up flags appearing in tasks or an ability to see other peoples to do lists... the first is more preferable but I will take what I can.
Kindest Regards
WoodyJust add the 'admin' mailbox as additional account in Outlook, as opposed to additional mailbox (i.e. don't add it from Accounts Settings -> More settings -> Advanced, but from File -> Add account instead).
It will then show flagged items and tasks from all accounts in the 'To-do' list.
Maybe you are looking for
-
Laserjet 1100 drivers for win 7 pro 64bit
need drivers for the above details Laserjet 1100 mono model" s4224a sggjo25836 these are the only details on the sticker on the back of the printer.. It does NOT have product number. comes up wth this error Error: This product number is not associate
-
Best solutions for storing text, Word and pdf documents on iPad
I just switched from using a powerbook to an iPad + microkeyboard for my work computer (I'm freelance and need to bring my own device wherever I go), and I love the size and weight of it compared to a laptop. What I am glitching on is the fact that I
-
Hi, Can a system wide audit setting be created for a proxy user? In short, can there be a audit action entry in the DBA_STMT_AUDIT_OPTS table where the USER_NAME field has a NULL value and the PROXY_NAME field has some username? Thanks, Vijay
-
Strange characters encoding with CS3
I have just installed Web premium CS3 and am working on my first new project with Dreamweaver. All good so far except - it is not encoding some special characters properly. For instance if I type £50 in the design window, it appears as £50 in code vi
-
RAC -- CRS-0254: authorization failure
Hi, i m trying to start 1 instance in rac env using srvctl command i m getting following error. CRS-0254: authorization failure