1  Ethernet Wan port dead other 2 work

I have a Airport Extreme 802.11n 2 of the Ethernet ports work fine the 3rd one went dead I switched to an open one and it works the green light dose not lit on the dead port I tried rebooting it but no go. I would rather not set set it but if that would fix it I would give it a try it seems like a hard part issue to me.

It would be extremely unlikely that a reset would solve the problem that you have.
If the AirPort Extreme will function with the bad port, then you can set it up that way and not use the bad port. If you need more ports, you can add a Gigabit Ethernet switch to one of the good ports on the AirPort Extreme.
Apple does not offer repairs on the AirPort Extreme. They will exchange the product if it is in warranty or you have AppleCare in effect.
If the device is out of warranty....it is possible that a shop might be able to repair the product. But, the cost of repairs might be more than buying a new AirPort Extreme.

Similar Messages

  • Is there a difference between the Ethernet WAN port and the other 3 Ethernet Ports on a Time Capsule?

    As posted previously, my time capsule will not set up properly because I get an IP address conflict pop up window.  Is there a difference between the "Ethernet WAN Port" and the other three ports on the back of the Time Capsule?  I may have the DSL modem hooked into the "Ethernet WAN Port".  Thanks.

    it depends what you want to achieve and what configuration you have on your DSL modem/router.
    Resetting TC and run connection wizard from the Airport utility.
    Post the problems.

  • Won't recognize cable plugged to Ethernet WAN port

    I have a new Airport Extreme. I have gone through the setup process and it flashes amber. The cable from my DSL modem is plugged to the Ethernet WAN port but there is no green light at the port and Airport Utility says there is nothing plugged into the WAN port. The DSL cable works fine plugged directly into my Macbook Pro.
    HELP

    Smokerz wrote:
    use Airport Utility and select manual. Select internet then choose PPPoE and configure using DHCP. See what happens.
    He won't want to do that. He already has a modem so that is doing the PPPoE related stuff. All he would need is IP conectivity. You would probably want to configure the AE to:
    Create a wireless network.
    Then configure it to dole out DHCP addresses and presumably NAT too.
    This is assuming that your connection is like this:
    modem-->AEBS-->LAN/WLAN
    If you already have a router connection to the modem, or the modem is a router, i.e. DHCP enabled, then just turn on bridging but the rest should be fine.

  • Nothing is connected to the ethernet WAN port

    I have a 5th generation AEBS and FTTH. When I plug it into the wall, it reports that nothing is connected to the ethernet WAN port, but if I plug my MBP into the wall I get an IP address and can hit the Internet just fine.
    I called tech support and they said that everything looks great from their end, and that there is nothing that they can do.
    What I have found is that if I plug the cable from the wall into a gigabit switch, and then plug the AEBS into the switch, everything works fine!
    Any idea what can be going on? TIA!

    This is increasingly a problem.. the AEBS is not actually negoiating the speed correctly with the ONT supplied by the ISP.. it happens a lot with cable modems as well.
    Using the switch allows the two devices to negoiate speed correctly.
    You can do the same thing with old utility..
    Install 5.6 utility on your computer. Here is a method.. there are others.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
    Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
    Now with a real utility instead of the toyland edition you can do something about the WAN speed.
    Set to either 100mbit full duplex .. that would be my first option.. and second is 100mbit half duplex.
    Another alternative just popped up.. buy a crossover ethernet cable.
    https://discussions.apple.com/message/23236139?ac_cid=tw123456#23236139
    These cables are no longer required with modern equipment but you will find stores still stock them. For some strange reason.. in the one case reported that worked.. this indicates that the TC has some fundamental port issues.. and the mdix is not working correctly which is why the switch or manually setting port speed does.

  • Using DynDNS and Sharing disks over Ethernet WAN port

    I am having issues accessing the AirDisk from outside my LAN. So here are the steps that I have taken:
    In the AirPort Utility, I enable "Share disks over Ethernet WAN port".
    Created a DynDNS account at http://www.dyndns.com so my hostname points to my IP address.
    After reading a bunch of threads, mainly this one below, there are a few conflicting issues.
    http://discussions.apple.com/thread.jspa?messageID=4105319
    Someone mentioned you have to Setup Port Mapping to open up Personal File Sharing. But another said you don't have to set up Port Mapping. Well if you do, you're gonna run into a problem. This Apple article states you have to use a different port: http://docs.info.apple.com/article.html?artnum=305183
    Someone said Remote Access only works via AFP not via SMB. Is this true?
    Also do I have to enter my DynDNS hostname into the wide area bonour tab in the advanced tab?
    What am I doing wrong?
    Macbook   Mac OS X (10.4.8)   Airport Extreme N

    Are you aware of any DynDNS-like service that support Wide Area Bonjour?
    None at the moment. One might hope that Apple's .Mac service would make use of it, but I don't think Apple has announced anything about that possibility.
    Or as a practical matter is this a technology that only appears at the moment in private installations of OS X Server?
    I've found the version of dnsextd that ships in Mac OS X 10.4 (not just the server version) to be a bit flaky. One hopes it will work a lot better in Mac OS X 10.5.
    But since the AEBS doesn't support DynDNS update, as other routers do, it ends up requiring a server after all.
    Wouldn't it be nice if DynDNS and similar services allowed you to configure DNS resource records manually? That way, it wouldn't matter what your home gateway/fileserver was capable of doing— you could just edit your DNS zone accordingly.

  • Speed limitation on Time Capsule Ethernet WAN port

    I have a Time Capsule 2TB model A1409 that is connected to a Motorola Cable Modem SBV5121 and only connects to it ("green light") when the Ethernet WAN port is set to 10 Mbps/Half Duplex (fastest speed - average 5 Mbps for download) or 10 Mbps/Full Duplex (slowest speed - average 3 Mbps for download). No other mode can get a connection "green light". Time capsule software is 7.6.1.
    Today I connected a Cisco Linksys E2500 router to the same cable modem and download speed increased to 10 Mbps which is what I am paying for my ISP. I haven't even touched the ethernet WAN port configuration. Straight forward.
    I would be grateful if someone could point out a configuration change that would allow my TC to connect as fast as this Cisco router.

    fcamineiro wrote:
    It works fine in Bridge Mode with a Thomson Integrated Modem/Router. But I don't want to use this configuration since I won't be able to use the TC's Guest Network.
    Just tried connecting with Cisco's ethernet cable but remained the same.
    Is it possible to bridge the Thomson??
    Stick a small cheapo switch between the TC and Morotola and see if that fixes it.. as I said, not all chips quite talk to each other.. even in this day and age.
    And Motorola cable modems seem to have more problems than most .. this is not new to me.

  • Apple Airport Express Base Station 10/100BASE-T Ethernet WAN port with AirT

    Hello fellow mac users, I am currently interested in getting the Apple Airport Express Base Station 10/100BASE-T Ethernet WAN port with AirTunes. However I already have a Linksys Wireless G with SpeedBooster router. Will the Airport Express with iTunes work with my router? Or will it work with any router? Thanks!
    P.S. I want to get the Apple Airport Express Base Station 10/100BASE-T Ethernet WAN port with AirTunes
    Powerbook G4   Mac OS X (10.4.5)  

    Yes, it should be possible. Since your iMac is connected via Ethernet to another router, you would have to reconfigure which Network Service you will be using on the iMac to switch between streaming and connecting to the Internet.
    For example, I am assuming that the Built-in Ethernet service is currently at the top of the Port Configurations 0list within System Preferences > Network > Show = Network Port Configurations when your iMac is connected to the other router by Ethernet. You would then need to drag the AirPort item to the top of the list, and then, connect to the AirPort Express to stream.
    The other option to avoid this is to configure the AirPort Express to join the wireless network created by the 2Wire router.

  • Share disks over ethernet WAN port

    If I turn on "Share disks over Ethernet WAN port", how do I access it from outside my LAN?

    On a mac well in the finder press apple key+K type in your home external ip(255.255.255.255)
    On a pc windows key +r, type cmd, enter, net use k: \\"external ip(255.255.255.255)"/"the name of share"

  • No check box for "Share disks over Ethernet WAN port"

    I've recently bought an AirPort Extreme and have no problem on connecting to Internet and sharing disks. But my "AirPort Utility" looks different from other people's, and I feel uncomfortable about it.
    I saw many users' AirPort Utility screen shots, but all of them have "Share disks over Ethernet WAN port" check box under Disks > File Sharing tab. But mine doesn't; at the place where that check box should exist I have "Advertise disks globally using Bonjour" check box, which is usually under "Share disks over Ethernet WAN port" check box.
    I think this is very unusual. Does anybody have the same problem?
    Here is the my screenshot:link
    Power Mac G5   Mac OS X (10.4.9)  
    Power Mac G5    
    MacBook Pro   Mac OS X (10.4.9)  

    I have !
    i don' t understand neither...
    so strange ...
    Are you guys running version 7.1 of the Airport software?

  • Share disks over Ethernet WAN port is missing

    Hi All!
    I'm quite new to this Airport Extreme thing. I just set tne box up, and i wanted to share my disks over WAN, but the option "Share disks over Ethernet WAN port" is missing. I'm only able to turn on Bonjour
    My firmware version is 7.2.1
    Can anyone help me with this matter?
    -LarsD
    Message was edited by: larsd

    Hi Lars,
    The reason why you are not able to see the option "Share disks over Ethernet WAN port" is because you have set your Airport Extreme up as a "Bridge" (broforbindelse). You must be using the Airport Extreme as your router in order to have this option.
    Karsten

  • Airport Utility: Ethernet WAN Port setting

    In Airport Utility > Internet > Internet Connection .. is a property called "Ethernet WAN Port". The default setting is "Automatic (Default)".
    When I set this property to "1000 Mbps/Full Duplex" Airport Utility throws two interesting errors:
    1) You have nothing plugged into your WAN port (But I do have my Comcast modem plugged in there)
    2) You don't have internet.
    Upon Visual inspection of the Comcast modem, my IP connection to the house is gone. Specifically the green "PC" light is off.
    Now, when I change this property back to "Automatic (Default)" my IP connection comes back again.
    Does anyone have any thoughts or advice on why this is? I should also mention one more interesting thing ...
    When downloading a 40min (1 hour TV show) from iTunes it takes 15 minutes when my Mac is direct connected to the Comcast modem and 3 hours when my Mac is connected to the AEBS. I'm trying to change the "Ethernet WAN" property to 1000 Mbps/Full Duplex to ensure smooth connection from Mac to AEBS to Comcast Modme to Internet.
    Thanks!

    Bob, thanks. Makes sense.
    Do you have a notion of why the Comcast speed is cut when AEBS is connected to it vs. when the MacBookPro is directly connected to it?
    Example: Download 1.1GB file from iTunes (Episode 1 of Lost) - a 40 minute TV show
    Test 1: MacBookPro > WiFi (802.11n) > AEBS > Comcast Modem = 3 Hours (longer than show!)
    Test 2: MacBookPro > Ethernet > AEBS > Comcast Modem = 3 Hours
    Test 3: MacBookPro > Ethernet > Gigabit Switch > AEBS > Comcast Modem = 3 Hours
    Test 4: MacBookPro > Ethernet > Comcast Modem = 15 MINUTES
    Thanks,
    Brian

  • Configuring Ethernet 'WAN' port on AirPort Extreme

    I would like to know if there is any way to configure the Ethernet MAC address on the WAN port of the AirPort Extreme.
    This is a feature available on most other brands to accommodate the lock-down to the first Ethernet MAC address that the ISP encounters on their port.
    Quickly replacing one router with another requires the ability to set this address. Otherwise, lengthy support calls are needed with some service providers to reset equipment on their end.

    Even if you can't spoof a mac address with the Apple networking products, why not just call your cable company/ISP and give them the new mac address? That's all I had to do in order to switch from Linksys products to all Apple products.
    The ISPs do this because it's their little way of trying to control traffic thru each of the modems but only allowing for one device to be connected to it at a time.
    I'm wondering why you would keep switching back and forth between routers? I would think that when you do change routers, you'd want that to be a 'permanent' change and not a temporary one.

  • Share USB Disks over Ethernet WAN port

    What exactly does this option enable? The manual is a little less than clear. If I enable it, how would I access the drive remotely? I have dyndns set up, and the AEBS get's the Internet routable IP.
    But what method would I use? HTTP? FTP? What?
    I saw one post where it made it sound like this would actually keep dyndns updated with any IP changes, but that seems unlikely with how it is worded and documented.
    thanks,
    Sean

    According to a couple of reviews, sharing over wan is CIFS for Windows and AFP for Mac. I can access the drive remotely using AFP, but not CIFS. I go into "map network drive" and enter the server as follows:
    \\domain.dyndns.org\hdname
    That works when the machine is on the local network, but if I turn on the VPN, which makes it look like the machine is remote, it fails.
    I have the drive shared via wan ethernet enabled, and bonjour turned on.
    any ideas?
    Thanks,
    Sean

  • Allow configuration over ethernet wan port

    How are you supposed to do this exactly? For most rotuers the gui is web based so you browse to the WAN IP of the device with a specified port and you can make changes to the device.
    However as far as I know there is no web based controls for the Airport Extreme so how are you supposed to administer it remotely.
    1. Is there a web based way to do it? (preferred method)
    2. How can you do it from the Airport Admin utility?
    Any advice on this would be much appreciated!

    That is what I am doing, and it is working well.
    But when I do so, even if I tell the program to keep information in my keychain, I cannot see anyway to have this information handy. I mean, I have to reenter the same information over and over when I want to configure the base station from away.
    How can I save the information so that I just have to click an icon or choose it in a menu?
    Thanks

  • HT204400 no matter what i try,  my apple tv says it cant connect to the network and it gives me error -3906.  i have tried restart and reset, wifi, ethernet same error. all other devices work fine.

    My apple TV has been working fine. Now it gives me error -3906 and says it cant connect to the network. it wont accept the password for my wifi.  I have tried to restart and restore both the apple tv and my modem.  still the same issue and same error message.  any ideas?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for

  • How do I send pictures in an email I uploaded to onedrive so someone else can see them

    I uploaded all of my pictures (to onedrive), now what do I do? -I wrote my email and saved it as a draft.

  • PI 7.1 WS receiver cc connection problem

    Hi To invoke a WS in the internet - through a receiver WS communication channel - i need to use a proxy server for my HTTP request. Where in the cc configuration or PI configuration i can set this. Thanks in advance Michael

  • Macbook Pro & Talk Talk DSL-3680 router

    Hi, I have unlimited broadband and a DSL-3680 router. As a rule everything works very well, I have an iPhone, iPad, apple tv, LG TV and a Macbook Pro, everything works well apart from the wifi connection to the macbook pro, it works for about 5 minut

  • Colon In  MSS Address Field

    Dear All, We are implementing MSS. Under Team Information -->Employee Information --> general Information >Personal Data iView, the address lines contain a " : "(colon) . When I check the application in the Content Administration>Web Dynpro>mss~eepro

  • Can applet pass value back to web page?

    if i run an applet in a web page, eg: aspx is it possible for me to pass value back to the page?