1 Ghz Tibook with superdrive - can't burn dvd's anymore

Hi,
I keep having problems burning DVD's with my Ti-Book. Am running 10.3.9. It starts the burn (like for iTunes), but then it quits with an error. The drive used to work, and its still burns audio cd's just fine.
The partially burned DVD does show it burned about 1/4 of the disk surface, but then it stops.
Sound familiar?
thanks
'mark

There is a big difference in iTunes and the Media you choose.
DVD-R Media is the most widely used and recognized by players and computers alike. Many older computers are not able to read or write DVD+R Media and likewise are not able to use the higher speed media of 16X as well.
Some of the newer high speed media is marked on the packaging that it will burn at 1X,2X,4X,8X,16X but you must read the packaging.
Itunes will burn CD or MP3, (DATA is different than Audio or VideoTS)
Some users find the Software funished in there machines harder to use than the Roxio Toast 8 or Popcorn that is basicly choose what you are burning and add the folder and click burn. Were-as iTunes and iMovie are a little harder to use, in that first you must click your Blue Apple and then choose System Preferences and then choose CD-DVD and select what you want to happen when you insert either a Commercial CD or blank CD and the same with a Commercial DVD and a blank DVD.
Burning CD's and mp3's as well as Data and Music and Video TS DVD's each one is different and requires different settings unless you use Toast, which is much easier. Using Toast you simply select Audio, Data, or Video, drag the contents to the box and click burn. This will read write and verify your project if you are using the correct media for your burner.
ERROR messages are caused by the wrong media many times.
Remember if you are using itunes to burn with you need to use CD's if you are trying to copy music to DVD's your best bet is to use the disk utility.
Don

Similar Messages

I can not burn dvds anylonger with my MacPro. Why ?

Hi everyone. I already posted this message in another thread but got no useful replies.
Configuration: MacPro Early 2008, MacOSX 10.6.8
I can not burn dvds anymore and do not know why. I can play dvds and cds though!
The following is the usual error message displaying after clicking the button burn :
I have run Disk Utility from the Install cd of Snow Leopard and the small things which needed repairs have been repaired.
I have reset the PRAM and the SMC (System Management Controller). Nothing.
I have set up a new user account with admin privileges but it did not work.
Please, note that I am trying to burn the same Kodak Pro dvds for photo and data archival that I burned in the past in the same MacPro.
I am actually burning my dvds using my MacBook Pro connected with my MacPro through Airport but it's a very slow process, of course.
Any piece of advice ?
Thank you !
Paolo

Hi everyone. I already posted this message in another thread but got no useful replies.
Configuration: MacPro Early 2008, MacOSX 10.6.8
I can not burn dvds anymore and do not know why. I can play dvds and cds though!
The following is the usual error message displaying after clicking the button burn :
I have run Disk Utility from the Install cd of Snow Leopard and the small things which needed repairs have been repaired.
I have reset the PRAM and the SMC (System Management Controller). Nothing.
I have set up a new user account with admin privileges but it did not work.
Please, note that I am trying to burn the same Kodak Pro dvds for photo and data archival that I burned in the past in the same MacPro.
I am actually burning my dvds using my MacBook Pro connected with my MacPro through Airport but it's a very slow process, of course.
Any piece of advice ?
Thank you !
Paolo

Can't burn DVD's with Tiger

Since I installed Tiger, I can't burn DVD's using either Toast 6.1 or the native Apple burning software. I keep getting "Mismatch at byte...sector9. Verification failed." I am trying to back up a variety of files. I can burn CD's on my iBook G4, but I can't burn any DVD with any kind of content on my Pioneer. I tried PatchBurn with no success. Any suggestions? TIA. --- Dave

My guess is your Pioneer drive is connected via Firewire or USB 2. The OS 10.4 install or updates may have caused some problem with the Firewire or USB 2 communication with the drive. Oftentimes these problems are fixed by applying Apple's Combined System Updater. In your case that is the 10.4.4 combined update. It doesn't matter if you are already running 10.4.4.
Otherwise you may need to do an archive and reinstall of 10.4 to get the link working properly.

G5 + Superdrive no longer burning DVD's

Greetings,
I have an early G5 1.8 GHz single processor after I updated to 10.4.9 I can't burn DVD's - I can burn CD's - with the factory installed super drive(DVD RW DW-U21A) and get error message:
Burning the disc failed because of communication to the disc drive failed. (error code 0x80020022).
Here's what I've done to date;
reset SMU, PRAM, NVRAM, I checked for a firmware update through various sources - firmware from Apple support is "not needed"
I've checked my media on other machines and it works fine.
I see that there are similar posts since the latest 10.4.9 update without much resolution. Am I missing something, anyone have ideas I haven't thought of? Do I need to replace my drive?
Thanks in advance
G5 Mac OS X (10.4.9) DVD RW DW-U21A

My first question is, which single 1.8 GHz system is it? There were 2.
The first was the mid-range entry in the original G5 lineup in late 2003. Fan cooled, PCI-X, 8 GB max RAM.
The second was the low-end system in mid to late 2004. Liquid cooled, Standard PCI, 4 GB max RAM.
The reason I ask, is I have the original system at home and the later system at work. The home system has worked flawlessly since the day I bought it.
The work system had burning issues almost immediately. Ended up having the drive replaced under warranty.
On the upside, Internal DVD burners are getting less and less expensive and you could actually get a much better drive for relatively cheap.

STILL can't burn DVDs on Mac OS 10.6.5 after trying everything

Hi there.
Ever since I've updated to 10.6.5, I can't burn DVDs, doesn't matter which brand or what software I use. however, I am able to burn CDs. I went to my local Apple Store and they booted OS 10.6.3 on my computer via firewire and what d'you know ? it burnt a dvd right away. this is clearly an issue with the latest update. I did as they said, reseted my PRAM and even re-installed the latest update (I downloaded the 10.6.5 combo version from Apple Support).
Is anyone experiencing the same ? I know a lot of people had the same issue couple of weeks ago. did anyone successfully overcome it ?
cheers.

This is an older post from the Roxio Community (http://forums.support.roxio.com/topic/39824-toast-burns-cd-but-not-dvd-on-mac/); but seems like similar problem - maybe worth a try:
Either something is preventing the data from being sent to the drive's DVD-writing laser or the drive's laser is failing to start writing the disc. The only thing you can do with Toast is trash the plist and prefs files in the User>Library>Preferences folder and relaunch Toast. You might get a laser-cleaning disc for your drive. (A different laser is used to write CDs than is used to write DVDs). Also try choosing Save as Disc Image with Toast and burn the resulting disc image using the Image File setting in the Toast Copy window.
Note that the laser cleaning idea was also mentioned in the previous link provided. Have you tied that? - would be nice if a simple solution worked.

I can't burn DVD's on DVD Studio Pro since I install Snow Leopard

Well, my computer was working great, I had tiger installed and I decided to update to snow leopard and "big mistake" since then I haven't been able to burn DVD's from DVD Studio Pro, at the time to start writing the information to burn it, it shows a message saying " the recording device reported the error #6. Unknown device error. I connected and external dvd burner and when is time to burn it says "The recording device reported the illegal request. Unknown device.
I can easily burn DVD's from iDVD what makes me believe the problem is not with the burner. I went to Melrose Mac and they told me there is a conflict between FCS and Snow Leopard, they suggested to install Leopard instead, he mention many people has complain about the same issue Can that be possible? I got something thinking my computer was going to work better and I screwed it up!

Did you also upgrade DVD Studio Pro?

SuperDrive will not burn dvds

I can burn CDs,play CDs and watch DVDs. I can not burn DVDs. I have iLife but I cannot run iDVD because it is not compatible with of my version of OS. Why I don't know. Why should I have to buy every upgrade that come out? I can live with that, sort of, but why can't I burn a data DVD? I looked for a new driver but there does not seem to be one for Leopard. will I have to buy iLife 09 to bun a DVD?

This is what the system profiler says about disc burning:
HL-DT-ST DVD-RW GWA-4082B:
Firmware Revision: C03D
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds

Can't burn DVD

Dear,
I can't burn DVD +R with my macbook pro. Bought verbatim, sony, fujifilm dvd's nothing works.
An error shows up in toast something like this:
Sense Key = Medium Error sense Code = 0x73, 0x03
Kind regards,

I don't burn dvd's very often, so the challenge is to remember when I do.
Just remember that a disk image is like a "virtual disc", so you want to make Copy using the Image File.

I can't burn DVD's

Hi,
I can't burn DVD's.
My Matshusita DVD unit can read it without problems but when I insert a blank DVD to burn it, Finder doesn't open and I can't do it.
My Imac seems to recognize it because I could see DVD characteristics at discs utility.
Please, could you give me some advice?
Thanks.
Nasrau

Hi Damien,
I have "Use finder" when I insert a blank Cd or DVD in "CD's & DVD's" System profile.
My Imac is:
Nombre del modelo: iMac
Identificador del modelo: iMac8,1
Nombre del procesador: Intel Core 2 Duo
Velocidad del procesador: 2,66 GHz
Número de procesadores: 1
Número total de núcleos: 2
Caché de nivel 2: 6 MB
Memoria: 2 GB
Velocidad del bus: 1,07 GHz
Versión de la ROM de arranque: IM81.00C1.B00
Versión SMC (sistema): 1.29f1
Número de serie (sistema): VM848RXSZE6
UUID de hardware: 31403C7F-317E-5A1A-97D4-CE0525E36892
My DVD Unit is:
MATSHITA DVD-R UJ-875:
Revisión del firmware: DB09
Interconexión: ATAPI
Soporte de grabación: Sí (unidad enviada por Apple)
Caché: 2048 KB
Leer DVD: Sí
Grabar CD: -R, -RW
Grabar DVD: -R, -R DL, -RW, +R, +R DL, +RW
Estrategias de escritura: CD-TAO, CD-SAO, DVD-DAO
Soporte: Para mostrar las velocidades de grabación disponibles, introduzca un disco y seleccione Visualización > Actualizar.
I am using Snow Leopard.
Thanks in advance.
Regards,
Xavier.

Can't burn dvd that plays on dvd player. seems to be in file format. do i need extra software? using iMovie and final cut pro trail..both same result. have macbook pro 2012

can't burn dvd that plays on dvd player. seems to be in file format. do i need extra software? using iMovie and final cut pro trail..both same result. have macbook pro 2012

NStrange wrote:
... confused about which video format(s) to use (e.g.: SWF, MPEG4, etc.), and whether or not I should use 3rd party compression software (e.g.: Sorenson Squeeze, Compression Master, etc.) along with / in addition to Final Cut Express (among other similar issues)...
FC/e is based upon the Quicktime-engine; so, on 'Export using QT', you'll get all codecs & settings.
but which one..
due to sheer popularity, YouTube became a 'standard' - I'm happy with the convenience, YT and the 'embed'-code offers - excellent quality, automatic adjusted to the watchers connection&hardware.
my export settings are 720p, h264, 6MBit/sec - gives a - imho! - superb quality.
(example of a 'screen-test' from my latest project CLICK )
for creating so-called 'flash video'/.flv, you need 3rd party apps.
Sorenson Squeeze is more of an pro-tool, .. you need some background knowledge to get noticeable 'better' quality.
.. and the question is: are you willing to pay $.$$$ for that 0.x% more quality .. ? does your source offers such a 101% quality, which needs such affords?
if bandwidth is an issue, because you're hosting on your own servers, consider the free codec xh264, you can install as a free QT-plug-in.. with low or super-low bitrates, it offers a superior quality compared to h264 ...

Can't burn DVD, reinstall pkg?

Dear Friends,
I have read several other posts with the same problem (can't burn DVD's). I could previously. There were no real solutions just the usual diagnostic suggestions. How about reinstalling whatever package burns DVD'? I have Pacifist. What package would that be? Thanks for your help.

Dear Baltwo
Thanks for your reply. I have tried all the usual "voodoo" fixes. The ones you try when you haven't a clue about what might be wrong(disk utility,disk warrior,etc.)
I tried various versions of Toast, I've tried the built-in burning utilies. This same set-up burned DVD's fine before. I can read them, I can burn CDs, but not burn DVDs. I have been to the apple forums and found similar posts. I am guessing that whatever burns them has been corrupted. Is possible to reinstall just that part with Pacifist? I using OS X4.10 so my original install disk is old(4.3)I'd like to avoid reinstalling that whole old system. Thanks for your help.

Can iTunes burn DVDs into our idevices?

Since burn CDs is a piece of cake but can iTunes burn DVDs into our idevices.

I haven't tried to convert DVDs to iPod yet (had it for a week) but in the past I tried to convert DVDs to my PocketPC handheld using many tools and found that there is no quick, easy and trouble-free way to do it. The fact that Apple chose to use specific (proprietary) video codecs does not help. You have to get your hands dirty, learn a lot about video, codecs, bitrates and so on. It was more time and energy than I was willing to spend. I may give it another try though. I bought the Apple AV cable to view video on TV and it'd be a shame to not use it.
You may find some tutorials and other conversion tools at this website: www.dvdrhelp.com, they also have discussion forums. (hope it's ok to post this link)

Mac book pro can't burn dvds?

My mac book pro can't burn dvds in idvd, I can burn using an external dvd burner, can anybody help?

Welcome to Apple Discussions!
See my FAQ*:
http://www.macmaps.com/cdrfailure.html

I can't burn dvds on my mac book pro? anyone else?

I can't burn dvds on my macbook pro? I've bought several brands of them in -r & +r format. no luck. they don't even appear on the desktop as an icon when I insert them. I can eject them via disk utility. anyone else had this issue and solved it?

Welcome to Apple Discussions!
See my FAQ*:
http://www.macmaps.com/cdrfailure.html

I am looking to buy a mac mini but am wondering before i buy can i burn dvds and cds on it or do i have to buy a seperate drive

can you burn dvds or cds on a make mini without buying other devices

Mac Mini yes
Mac Mini Server no
So your answer is yes

1 Ghz Tibook with superdrive - can't burn dvd's anymore

Similar Messages

Maybe you are looking for