1.HOW DO I TYPE ON A MESSAGE ALL THE LETTERS IN CAPITAL, 1.HOW DO I TYPE ON A MESSAGE ALL THE LETTERS IN CAPiTAL

HOW DO I TYPE ON A MESSAGE ALL THE LETTERS IN CAPITAL?

you mean you dont like pressing the shift button after every letter?
go to settings, then general, then keyboard, then enable caps lock slider, then profit!
-mvimp

Similar Messages

  • Trying to watch a video on quick time player and i keep getting this message You may need to install additional software to open this type of file. what do i need to install and how

    Trying to watch a video on quick time player and i keep getting this message You may need to install additional software to open this type of file. what do i need to install and how

    I believe there is a technique which uses some similar suggestion to unwittingly tempt the user into installing malware, in order to be able to watch some (usually sexually explicit) video, so be aware of this ruse.
    The only things I would download would be Perian that extends Quicktime, available here,
    http://www.perian.org/
    and if that did not do it, then try VLC to use instead of Quicktime.

  • How do I disable the "Security Warning" - encrpted script message when I log in to a website using https ? If I cannot get the website owner to change it's code

    ''dupe of https://support.mozilla.org/en-US/questions/1027400 - locking''
    Whenever I log onto a website via https, I get this message and am unable to have Firefox save my password for the website.
    Another user asked this question and it was answered, however, the user was asking in the context of his own website where he was able to change the code.
    I am unable to change the code for this website but would like to disable this message and have Firefox remember my password for the user id I type in.
    Whenever I log onto a website via https (including my website), I get this message:
    Although this page is encrypted, the information you have entered is to be sent over an unencrypted connection and could easily be read by a third party. Are you sure you want to continue sending this information? This is followed below with two boxes, "continue" and "cancel".
    In order to connect with the website, I must click on "continue" each time I log onto the website. HOW do I permanently DISABLE this message?
    Chosen solution
    Firefox gives that error because the page is on HTTPS but your form action is HTTP:
    <form action="http://eclipse69forum.com/index.php?app=core&module=global&section=login&do=process" method="post" id="login">
    Can you change that to HTTPS?

    There is a disconnect here: if the form is being submitted securely, then you would not get that message. So although you may be looking at an HTTPS address in the address bar, Firefox is warning you that your username and password are going to an HTTP address and being transmitted in the clear rather than being protected.
    That's definitely not the normal way to set up a login page. Do you want to give the URL of the problem login page to get specific comments? Without knowing more, it sounds as though it isn't designed for secure logins and you may be wasting your time accessing their login form using HTTPS.
    Anyway, to answer your question, I don't think there is a way to disable that warning.

  • How does Azure Compute Emulator (or the Azure one) determine if a role is web project or something else ("The Web Role in question doesn't seem to be a web application type project")?

    I'm not sure if this is F# specific or something else, but what could cause the following error message when trying to debug locally an Azure cloud service:
    The Web Role in question doesn't seem to be a web application type project.
    I added an empty F# web api Project to a solution (which adds Global.asax etc., I added an OWIN startup class Startup etc.) and then from an existing
    cloud service project I picked Roles and
    chose Add
    -> Web Role Project in solution, which finds the F# web project (its project type guids are 349C5851-65DF-11DA-9384-00065B846F21 and F2A71F9B-5D33-465A-A702-920D77279786),
    of which the first one seem to be exactly the GUID that defines a web application type.
    However, when I try to start the cloud project locally, I get the aforementioned error message. I have a C# Web Role project that will start when I remove the F# project. I also have F# worker
    role projects that start with the C# web role project if I remove this F# web role project. If I set the F# web project as a startup project,
    it starts and runs as one would expect, normally.
    Now, it makes me wonder if this is something with F# or could this error message appears in C# too, but I didn't find anything on Google. What kind of checks are there when starting the emulator and which one needs
    failing to prompt the aforementioned message? Can anyone shed light into this?
    Sudet ulvovat -- karavaani kulkee

    Sudet,
    Yeah you are right, the GUID mentioned seems to be correct and the first one i.e. {349C5851-65DF-11DA-9384-00065B846F21} means the web application project which compute emulator uses to determine while spawning up role instances.
    You might want to compare the csproj of your C# and F# web projects which might give some pointers.
    Are you able to run your F# web project locally in IIS? If yes then you will definitely be able to run it on azure so I will recommend to test it in IIS Express first.
    Here are some other tips which you can refer or see If you are yet to do those settings
    1. Turn on the IIS Express - You can do it by navigating to project properties
    2. Install Dependent ASP.NET NuGets / Web Api dependencies (If there are any missing), Reference System.Web assembly
    Also I will suggest to refer this nice article about how to create a F# web Api project
    http://blog.ploeh.dk/2013/08/23/how-to-create-a-pure-f-aspnet-web-api-project/
    Hope this helps you.
    Bhushan | http://www.passionatetechie.blogspot.com | http://twitter.com/BhushanGawale

  • I want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

    i want to install lightroom previously installed on a macbook on a new macbook. I get an error message when I try to use the same serial number. How can I install lightroom on my new mac?

    Oliver,
    Are you getting activation errors? As Ned stated , it is easier to troubleshoot if we have the specific type of error and error detail that you are getting.
    Here is some help on activation if this is the issue:
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Pattie

  • How can I pass a file refnum into and out of external c++ code? What type does it convert to in c++?

    I am trying to write external c++ code that will read a file already opened by Labview and therefore assigned a refnum. (Unfortunately, I definately can't use the standard Labview vis.) However I am not sure what c++ type to use in order to manage the refnum.
    All help and thoughts appreciated. Thanks,
    Joanna

    You could do ALL your file handling in C or C++ (MFC CFile for
    example) and pass Microsoft file handles into and out of LabVIEW
    instead of LabVIEW file references into and out of C. This may be an
    easier way to attack the problem.
    You could create a DLL in MSVC that exports a FileOpen function, a
    FileClose function and a FileRead and/or FileWrite Function and then
    call that DLL from place to place as required in your code.
    It would help us if you would explain what kind of data you are trying
    to read or write and what the application is. Is it binary data?
    text files? Do you need some special Win32 file system feature like
    file mapped memory? I guess what I am asking is what is your
    motivation for doing file handling in C or C++?
    Douglas De Clue
    LabVIEW developer
    [email protected]
    "Rolf" wrote in message news:...
    > A LabVIEW file refnum is an internal Magic Cookie to LabVIEW and there is no
    > way to directly extract the actual information assigned to that Magic
    > Cookie.
    > However the CIN Reference Manual describes one function which allows to
    > retrieve a lower level "File" handle and at least on Windows 32 bit and
    > LabVIEW
    > from version 5 up to and including 6.1 this "File" LabVIEW datatype directly
    > maps
    > to the Win32 API "FILE" Handle.
    >
    > The function to use is
    >
    > MgErr FRefNumToFD(LVRefNum refNum, File *fdp);
    >
    > It is declared in extcode.h or one of its dependant headers and exported
    > from "labview.lib"
    > all located in the cintools directory and you can link this lib also to a
    > normal DLL project.
    > However calling this DLL then from any other process than LabVIEW or a
    > LabVIEW
    > executable will not initialize the DLL anymore correctly.
    >
    > Your best option if you need to write in C(++) should be to use the LabVIEW
    > file manager
    > functions described on the External Code Manual (manual/lvexcode.pdf) on
    > this File handle.
    > If you need to use directly some Win32 API functions with it please note
    > that although currently
    > the "File" in the LabVIEW file manager functions matches the FILE in Windows
    > 32 bit API
    > functions this is an undocumented and hence unsupported feature. The next
    > LabVIEW version
    > may actually use a different datatype for its "File" parameter to the
    > LabVIEW file manager calls
    > and your use of assuming File == FILE may simply crash.
    >
    > Also operating on a file refnum in LabVIEW which has been accessed directly
    > with Win API
    > functions may result in strange behaviour such as the file read/write mark
    > not being updated as
    > you would maybe expect it.
    >
    > "Jo" wrote in message
    > news:50650000000800000016520000-1023576873000@exch​ange.ni.com...
    > > How can I pass a file refnum into and out of external c++ code? What
    > > type does it convert to in c++?
    > >
    > > I am trying to write external c++ code that will read a file already
    > > opened by Labview and therefore assigned a refnum. (Unfortunately, I
    > > definately can't use the standard Labview vis.) However I am not sure
    > > what c++ type to use in order to manage the refnum.
    > > All help and thoughts appreciated. Thanks,
    > > Joanna

  • [svn:cairngorm3:] 15301: - Fixing a bug in the case where a Message is dispatched without a ModuleId defined to a Module type which is not yet instantiated .

    Revision: 15301
    Revision: 15301
    Author:   [email protected]
    Date:     2010-04-09 03:30:11 -0700 (Fri, 09 Apr 2010)
    Log Message:
    - Fixing a bug in the case where a Message is dispatched without a ModuleId defined to a Module type which is not yet instantiated.
    - Updating the sample to show this use-case.
    Modified Paths:
        cairngorm3/trunk/libraries/Module/src/com/adobe/cairngorm/module/ModuleMessageDispatcher. as
        cairngorm3/trunk/libraries/ModuleTest/src/CairngormModuleLibSample.mxml

    Hello,
    The error
    2. How to get rid of "ORA-06512: at"FLOWS_030100.WWV_FLOW_RENDER_QUERY", line 636"?you can also find in the new features application. I wrote a post about that some days ago:
    Bug in New Features Application?
    Had some trouble to get the PDF print working, too. Printing works fine for standard reports, but for interactive report I am not able to get it working. Sometimes I am getting only blank pages (and no file) and sometimes I am getting PDF's which just contain an internal 500 error. Some details are in this thread: Print Interactive Reports does not work
    Maybe that's related to the error of kkkannan74.
    Regards, Tine.

  • HT4528 Howdy.  I keep getting a message stating that my apple ID has been disabled.  I recently contacted my CC company, AMEX, for several fradulent iTune charges, which is probably where the problem first originated.  How can I resolve this issue?

    Howdy.  I keep getting a message stating that my apple ID has been disabled.  I recently contacted my CC company, AMEX, for several fradulent iTune charges, which is probably where the problem first originated.  How can I resolve this issue?

    I had to dispute several unauthorized charges to itunes. My apple id was disabled after that. I followed jarnoldus's (older post) advice and it worked. Im duplicating his entry here with a few modifications. I hope this works for you.
    1. Go to https://getsupport.apple.com
    2. Choose your product (mine was ipad)
    3. Click the "iTunes, App Store or iBooks" icon
    4. Click "Apple ID account security"
    5. Type in "apple id has been disabled"
    6. Choose your country (mine was US)
    7. Choose the "talk to apple support now" option
    8. Provide the info they request (name, email, phone number)
    9. They will call you right away.
    Explain your apple id has been disabled. The rep will connect you to an iTunes rep. He/she will look up your account. You will be required to answer your 3 security questions. You MUST get a minimum of 2 correct. If you succeed they will enable your id. Good luck!

  • ICal was linked to a Google account I canceled.  When I open iCal, a message says iCal can't connect to the account server.  Clicking OK repeats the message.  Clicking OK, iCal quits. How can I eliminate the problem server?

    iCal was linked to a gmail account I canceled.  When I open iCal, a message says iCal can't connect to the gmail account server.  Clicking OK repeats the message.  Clicking OK again causes iCal to quit. There is no opportunity to delete the link.  How can I eliminate the problem server or otherwise get iCal working again?  (OS 10.6.8)

    The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
    If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
    sudo sed -i~ '10,$d' /etc/hosts
    You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
    If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
    That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • I am trying to install Elements, I get this constant error message. This installation is not supported by this processor type. Contact your product vendor.

    I am trying to install Elements, I get this constant error message. This installation is not supported by this processor type. Contact your product vendor.
    I am using Windows 8.

    Hi,
    Which version of Photoshop Elements are you trying to install?
    Are you installing from DVD or a download?
    If DVD, make sure you are using the Windows one, not the MAC one.
    What device are you trying to install on?
    Does your system meet the required spec?
    Are you on Windows 8 or Windows 8.1?
    Brian

  • I am trying to turn on iCloud, I get a message "can not connect to server". How do I connect to server?

    I can't get iCloud to turn on. When I try to start it I gat a message "can not connect to server". How do I start the cloud?

    So what model and year is your machine?
    Here are the requirements for ML:
    http://www.apple.com/osx/specs/

  • How to get the connected Adapter Object for a particular BDoc Type?

    Hi All,
    I have a scenario in which CRM system is connected to ERP system.
    In SMW01 transaction, I can see one BDoc with BUS_TRANS_MSG as the BDoc Type in CRM.
    Now, how do I get to know if this one BDoc is a SALESDOCUMENT or SALESCONTRACT.
    Is there any way thorough which I can get to know the Adapter Object for this particular BDoc.
    Regards,
    Madhuri

    Hi Madhuri,
               Happy new year.
    In Transaction : R3AC1.
    You can observe the Linked BDOC for the adaptor objects. For example Sales docuemnt and Sales contrcat will have the same linked BDOC as "BUS_TRANS_MSG".
    If you see an error in SMW01, you want to find whether it is salesdocument or contract.
    1. Please take the Queue name from SMW01.
    from the queue name you can find whether it is sales contract or sales document.
    Queue name is customized in tables: SMOFQFIND.
    I hope this helps you.
    regards,
    Sri...

  • HT5622 when i try to sign in to my Icloud account i get this message"The Apple ID is valid but not an icloud account" i only have the one ID so how do I get around this please

    when I try to sign in to my Icloud account on my windows PC i get this message"The Apple ID is valid but is not an icloud account" i only have the one apple
    ID so how do I get around this please ??

    note I own no other Apple device I just wanted to use icloud for data storage and Itunes

  • My iPhone 4S won't let me send any text messages, I can see the recent ones but when I go to type back the screen goes off and it goes back to the home screen?

    I have had my iPhone 4S for a while and it's worked perfectly. Messages were going through fine and everything. I went on this morning as I had a text from someone. I opened the text and the screen just went back to the homepage. It has never done this before so I tried opening it again. The same happened again. I opened a recent text and I can read the old messages fine, it's just as soon as I click to message/text them back it just goes off.
    I tried with Facebook mailing and the same happens, it just goes off. And when I go on safari and try and type something in it goes off.
    I don't know what to do. I have tried turning it off and on and that didn't work. I have tried resetting network connections and I just don't know what to do. I am currently trying to software update to the iOS 7.0.4 to see if that has anything do with it. As before I clicked to text the person back a carrier question came up and it has come up before, could that have something to do with it?
    Please can you help me?

    Basic troubleshooting from the User's Guide is reset, restart, restore.  Try each of these in order until the issue goes away.

  • I have a problem while typing in my MacBook pro. it is showing different characters when i type. for example: qw`e§r]t[y=   this is how when we type "qwerty|" can anyone help me pls?

    I have a problem while typing in my MacBook pro. it is showing different characters when i type. for example: qw`e§r]t[y=   this is how when we type "qwerty|" can anyone help me pls?

    You could just try changing your Input Sources under System Preferences>Language & Text:
    But I kind of doubt that's going to work. It may be a hardware problem or a system problem. If you take it into Apple they might be able to determine which and might advise a reinstallation of System software. I would take it to an Apple Store or an AASP but, first, make sure that you have a backup just in case they suggest a clean install of the system.
    Good luck,
    Clinton

Maybe you are looking for