"1" key still not working after reset

I posted a while ago about my 1 key not working on my laptop (iBook G3 800MHz)or an external keyboard. I was advised to try resetting PRAM and then PMU. I finally did both with some help and the process did not fix the "1" key. I am only able to type a "1" by using the num lock key on the laptop or the 10-key pad on the external keyboard.
Does anyone have any more suggestions as to how I can try to fix this problem?
Thanks in advance, (and thanks for the suggestion about PRAM and PMU; I liked learning)
P.S. A friend of mine told me to hide the keyboard .plist from the preferences library but there was no such plist. Is this a difference between 10.3.9 and the new 4.0 OSX? I saw the keyboard .plist on her machine but when I got home I didn't have one.

Open the Speech pane of System Preferences and check whether either the speech key or the listening key has become set to that keystroke; if so, change the setting.
(25709)

Similar Messages

B110a black in still not working after trying all recommended solutions

Hi there
Black ink still not working after spending many hours trying to sort. I've cleaned the printhead carefull several times (is immaculate now) and run the system clean up and alignment functions several many times too. I've cleaned the metal connecting points. I wiggled things carefully. I've attempted printing multiple pages in b/w in case it was going to take a while to get the ink flowing again. I've replaced one (expensive) new black cartridge with another brand new (expensive) cartridge and still nothing. This machine is probably out of warranty but seriously not very old. It really ought to be working okay. We use it regularly a little bit every week. Any ideas?

The document here has troubleshooting steps that may help resolve black not printing on your Photosmart b110a. Be sure to check the vents as shown in solution six, step three. If the above does not resolve the problem the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My iphone 4 is not working after resetting

My iphone is not working after resettong, it just let me do emergency calls.
and if i turn it on it saids to connect USB to itunes.

If you reset to factory that is expected behavior. You need to connect to iTunes to bring it into the Apple World. You should then be able to connect to the network of your cell provider.

Media keys still not working on my laptop with itunes 10.4.1

Hi All,
I have a Dell XPS 16 laptop with the latest version of itunes installed and my media keys still won't control it unless I'm currently in itunes. It's incredibly annoying as I'm sure most of you would understand. Anyone else have the same issue or a fix?
Thanks

I used to have the old Logitech illuminated keyboard and I thought it was because of logitech so I bought a new keyboard. (There were several issues with my old keyboard anyways) I now have the Logitech k360 and the same issue popped up. The play/pause backwards and forwards keys do not work. However on a side-note the FN hotkey to open iTunes does work. I have reinstalled drivers, software, itunes, did some other stuff and they didn't work. It's not on logitech's end.
I just reinstalled to 10.3.1 and now I'm getting a message when I try to run the program saying "The file 'iTunes Library.itl' cannot be read because it was created by a new version of iTunes." I'm just going to uninstall and reinstall the latest version for the 3rd time now and hope Apple releases an update which fixes this compatibility issue.
I'm running Windows vista 64.

Iphone 4s camera still not working after replacing and restore?

I bought phone with back camera not working so first i done a restore and update to no avail, then done a restore as new phone still no joy, so i decided to buy new camera which i fitted no problems but its still not working? what else can i do as there is no warranty on the phone?

Find a third-party repair shop with experience in fixing iPhone cameras. Apple won't help you.
Be aware, since Apple does not sell iPhone parts, there is no legitimate source for such, & many on the market are counterfeit.

Creative zen V+ still not working after coming back from assistance for the second ti

hallo, what thje hell is happening with creative Zen V+ I got it back from assistance for the second time and it's still not working!!!!!!!!!!! I want my money back now, I'm gonna spam the whole of the internet with this unfunny joke, what the hell I'm suppoised to do I really fed up, since I bought the unit it worked for less than one month and for another one it's been back to the assistance for two times!!!! And still it's not working!!!! Now let me tell you this creative zen V + is a worthless, costly, cheap piece of crap, and I mean crap, what the hell am I supposed to do now Send it back for the third time 249 euros for this crappy piece of cheapo plastic Please is it allowed me to send it back and having in change some olther player I don't mean it to be trendy or flashy or all of the usual marketing **bleep** coming with these, I just want a player that actually play my music, a player I can load all my music without the application to freeze, the player to freeze and me having to format and reboot again and again. Is it creative capable to accomplish such task, do they still know how to build an mp3 player that actually work without me having to buy and install windows vista Or they don't Do creative have some old player still in stock zen touch wasn't stilish but worked well until the HD dyied, zen V plus isn't working as it is supposed to do, plain and simple. What do I have to do now in case you are wondering the malfunction is still the same.

For the Zen V, as it states on the box, you need Windows XP Service Pack or 2, or Windows Vista. You also need Windows Media Player 0 or . As long as you have that, you should be fine there.
You may also have a corrupted file that is causing the problem. Try not transferring them all at once, transfer it in blocks instead. If one block fails to transfer, try and narrow it down and see if it's a specific file in that block causing the problem.
When you try it on another PC, do be sure that PC meets the system requirements, especially the Service Pack if it's Windows XP. You'd be shocked how many times people try it on a 2nd computer, get angry when it doesn't work, call tech support, and find out the 2nd PC doesn't even have SP on it.
All else failing of course contact Support. They can't help you if you don't let them know what's going on, and if you don't yell at them they'll do their absolute best, trust me.
Good luck,
Dale

Flash still not working after enabling it on windows 8.1?

I followed the instructions on the help section and enabled flash, however it is still not working. I then tried to download it and the page takes me to the instructions on how to enable it.
I have just bought a new laptop and it is fully updated with 8.1.
Any help would be appreciated.

Flash Player is actually built into Internet Explorer on Windows 8 and 8.1. There is nothing for you to download or install from Adobe.
From the description of the problem, it sounds like you're going to a website and getting a message that Flash Player cannot be found.
On most sites, there is JavaScript that determines what version of your browser and Flash are installed, so that it can determine what content to show you. In Internet Explorer 11, Microsoft changed the string that identifies Internet Explorer to those scripts, and it's very likely that the website you're visiting needs to make adjustments to accommodate the change. There will probably be a bumpy transition period as major web properties notice the problem and fix it.
In the meantime, Mike's suggestions are good. Use Compatibility Mode or an alternate browser. You may also want to contact the website (particularly if they're a small shop) to let them know about the problem. You're on the early end of the adoption curve, and they might need a head's up.
Thanks!

Apps not working after reset

I had to reset my iphone and after resetting it, holding down the power and home keys until the apple showed up none of my apps will work. The app screen will come up for a second or two and then it switches back to my home screen. Any remedies for this?

If only 3 apps, try deleting and re-installing the apps first.
Restoring your iPhone with iTunes is selected under the Summary tab for your iPhone sync preferences.
Restoring completely erases your iPhone followed by re-installing the firmware. After the firmware is re-installed, you will be prompted to restore your iPhone from your iPhone's backup, which is the default selection. There is another option - restore as a new iPhone or not from your iPhone's backup.
Your iPhone's backup includes data such as most iPhone settings, email account settings, contact info, SMS messages, notes, recent calls, call favorites, photos in your iPhone's Camera Roll, and 3rd party app settings and data created and stored by a 3rd party app.
Your iPhone's backup is updated if needed as the first step during the sync process.
Before restoring an iPhone with iTunes, it is a good idea to import the photos in your iPhone's Camera Roll - as with any other digital camera. Not a good idea to depend on your iPhone's backup alone for these photos, and contact info is designed to be synced with a supported application on your computer - so also not a good idea to depend on your iPhone's backup alone for contact info.
After an iPhone is restored from the backup or as a new iPhone or not from the backup, this must be followed by a sync.
Before restoring an iPhone, sync your iPhone immediately before doing so to update your iPhone's backup if needed.

Headphone Jack STILL not working after hardware replacement

Can someone help me, my headphone jack stop working suddenly from one day to another, it only plays the left channel. I took it to repair store and they changed the whole headphone jack hardware for a new one and it still has the same problem, I thought it was matter of restoring it so it could accept the new hardware but still the same issue. What should I do?

I had the same problem and chatted with tech support and they told me to reset the PRAM and SMC which did not fix the issue. After contacting them a second time I was told my computer needs to be repaired. Which is not the problem it is a software issue.
What finally fixed it was (this was done after resetting the PRAM and SMC):
* Note: you can try this first and maybe it will solve your issue if not reset the PRAM and SMC then do the following.
1. Open system preferences
2. Chose sound
3. Chose Output then headphones
4. With headphones plugged in I checked the mute box on the bottom right and unchecked it they worked.
Then when unplugged the speakers didn't work so I did the same but choosing the internal speakers
OS X Mavericks: Reset your computer’s PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Hope this helps others!!

Flash player still not working after following all discussion advice

Requested information: I have Internet explorer 9/ using 32 bit on 64 bit computer/windows 7/flash player 10.2 version
I contracted what my husband called a "rider" virus when I opened a knitting pattern of all things and if I understood it correctly was one of the anti-malware viruses talked about. My husband was able to remove the virus but like others have said here, my flash player will not work. My computer is only 3 months old!
Here is what we have done:
1: First removed all flash player and shock wave
2: I have run a full scan with my Mcafee program, then ran a full scan and quick scan too with my malwarebytes program. Everything in both is now clean. I then rebooted (I also even tried doing all of this in safe mode too with nothing changing)
3: came online and read a bazillion threads about others problems and tried every suggestion pretty much including those below
4: husband checked the kill bit (d27 thingy) and it was not there
5: reinstalled flash player and shock after running the scans and though they show up in my programs when I looked at the add ons as suggest to others the
neither shockwave or Flash Object was there
6: uninstalled everything again
So now I am back to where I started with nothing installed because I still have an issue and we don't know what it is. I truly appreciate your help in any way as it is frustrating that none of the other suggestions have helped.
this may not as my grandma used to say have anything to do with the price of rice in china, but we do keep getting a short freeze up on the computer followed by a message that the display driver stopped responding and recovered then it works again, but it does happen fairly frequently and this has been since the virus. I am showing everything is clean though with regards to virus scans and malware spyware scans.

Just when I thought I would finally find the answer you sent a message offline, which didn't help me a bit.
I have the same problem. My wife got a virus and I was able to uninstall it by poking around. After killing the virus IE would not run. I found some messages on the internet which enabled me to solve that problem by making some registry changes. However, I still have not been able to get IE to run flash. I do have it running in FireFox.
What was the step that you sent in private email that enabled him top solve the problem?
Thanks

Touch ID still not working after update 7.1.1

Hi,
Like many other users, I had issues with the TouchID in 7.1
Just updated to 7.1.1 and the same issues persist.
Not only am I not able to login with my touchID, I am unable to add my fingerprints upon deleting them. It always gets to the end of the first stage (the inner part of the finger) and towards the last 3 lines, it stops progressing no matter how many times I push it until finally it tells me that the finger is not able to be added and to try another finger.
I can try to connect it to the power when I get home to see if that fixes it - though from what I've read on the forums, 7.1.1 is supposed to completely fix the issue? I am still not getting into the phone with any fingerprint (literally not working. 0% success rate).
Anybody else with the same issues?

Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
Clean the Home button with a soft cloth.
Follow the instruction carefully, remember to use a different angle each time you scan.
Here: http://support.apple.com/kb/HT5883
Remember you can only scan 5 fingers

Radio buttons not working after resetting

I have a form with two radio buttons for each question. Each question is in its own frame "Q1," "Q2," etc. I also have a btn_Reset created to reset the form, i.e. reset all radio buttons and return to "Q1" frame. All buttons work as they should, including resetting the radio buttons, however, once I reset the radio buttons and return to "Q1" to start over, the actions associated with each radio button upon clicking on them do not work. Here's my code:
//Frame "Begin"
gotoAndStop("Q1") //I also define my variables in frame "Begin"
//Frame "Q1"
rbtn_YESQ1.onPress = function():Void
     attachMovie("btnReset", "btn_Reset", 1, {_x:0, _y:0});
     btn_Reset.onRelease = function():Void
          xfa.host.resetData("radioGroupQ1"); //this resets my radio buttons in "Q1" frame
          gotoAndPlay("Begin");
//Once I return to "Begin" frame, my variables are reset to their initial value since that's where I originally defined them, and I go to "Q1" because that's what the code in frame "Begin" says. Here is where I click on rbtn_YESQ1 again and even though the button does fill in, it does not attach btn_Reset to the stage as defined by rbtn_YESQ1.onRelease function.
What am I doing wrong?

Here's the full code for the radio buttons:
////Code in frame "Q1"////
//rbtn_YESQ1 code
yesListener = new Object();
yesListener.click = function (evt)
    mc_EmptyReset.attachMovie("btnReset", "btn_Reset", 1);
    mc_EmptyReset.btn_Reset.onRelease = function():Void
        //Places "Reset Confirmation" window on top
        attachMovie("mcResetConfirmation", "mc_ResetConfirmation", getNextHighestDepth(), {_x:24.0, _y:56.0});
        resetConfirmationTween = new Tween(mc_ResetConfirmation, "_alpha", easeNone, 0, 100, .5, true);
        mc_ResetConfirmation.btn_No.onRelease = function():Void
            mc_ResetConfirmation.btn_No.enabled = false;
            mc_ResetConfirmation.btn_Yes.enabled = false;
            resetConfirmationTween.yoyo();
            resetConfirmationTween.onMotionFinished = function():Void
                removeMovieClip(mc_ResetConfirmation);
        mc_ResetConfirmation.btn_Yes.onRelease = function():Void
            mc_ResetConfirmation.btn_No.enabled = false;
            mc_ResetConfirmation.btn_Yes.enabled = false;
            resetConfirmationTween.yoyo();
            resetConfirmationTween.onMotionFinished = function():Void
                removeMovieClip(mc_ResetConfirmation);
                gotoAndPlay("Begin");
rbtn_YESQ1.addEventListener("click", yesListener);
//Same code as above btn_NOQ1
noListener = new Object();
noListener.click = function (evt)
     //same code as above...
rbtn_NOQ1.addEventListener("click", noListener);
////Code in frame "Begin"////
gotoAndStop("Q1");

HT3669 SCanner for HP 4680 still not working after download of new siftware

The Scanner is scanning the document but the dicument does not appear in the computer. I have unloaded and reloaded the software using the intructions but it still does not work.

Try Image Capture, Preview, or Print & Scanner prefPane. Also, see http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967500#N91

Satellite L305D-S5881: Touchpad and FN keys do not work after Win 7 installation

I have recently installed windows 7 and all of a sudden yesterday my touchpad did not work.
I was not able to move my mouse arrow at all.
I had to purchase a wireless mouse so I could use my laptop.
When I press the fn key plus f9 nothing happens to see if it is enabled or disabled.
I have a satellite l305d-s5881
thanks for your help

Hi mate
The Satellite L305D-S5881 belongs to the Toshiba US series and has been released for US market.
You will need to visit the Toshiba US driver page in order to get all drivers.
To get the touchpad working, you will need to install the Touchpad driver.
Furthermore the FN buttons are controlled by VAP (value added package) and Flash Card Support Utility.
You need to install both; firstly VAP and then Flash Cards.
Here is the Toshiba US page:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
Greets

Hp5510 black ink still not working after two cartridge changes and hard reset

Can you help?
Our 5510 does not print the black ink, we have tried hard reset, two new genuine black printer cartridges and it still refuses to play ball. All other colours print ok.
Thanks steve

Hello @Bigeady860,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

"1" key still not working after reset

Similar Messages

Maybe you are looking for