1 LINK : fatal error LNK1104: File "NiDAQmx90.lib" couldn't be opened
He
Hi Gerhard,
have you re-installed the DAQmx driver after you installed Measurement Studio?
Are you planning on using Measurement Studio MFC Support for Visual Studio 2010? If so, please check http://ni.com/info with the info code "MFCsupport".
Regards
Peter
Peter A.
Field Sales Engineer, NI Germany
Similar Messages
-
I am having a application in Visual Studio 2003 on Windows XP , Now I am Migrating the application in Visual Studio 2005 on Windows-7 .
In my Development PC , I was install Measurement Studio 2009 , NI DAQ 7.01 and Field Point 6.05.
my application is Showing following error:
Linking...
LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDl?l\Debug\BuildLog.htm"
NICfpDAQDll - 1 error(s), 0 warning(s)
When I copy from NiFieldPoint71D.lib library from Measurement Studio 7.1 and put in :\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib.
my application is Showing following error:
1>Linking...
1>atlsd.lib(atltrace.obj) : error LNK2005: "unsigned int (__stdcall* ATL::g_pfnGetThreadACP)(void)" (?g_pfnGetThreadACP@ATL@@3P6GIXZA) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1>atlsd.lib(atlbase.obj) : error LNK2005: "class ATL::CAtlWinModule ATL::_AtlWinModule" (?_AtlWinModule@ATL@@3VCAtlWinModule@1@A) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1> Creating library ..\..\lib\debug\NICfpDAQDll.lib and object ..\..\lib\debug\NICfpDAQDll.exp
1>..\..\bin\debug\NICfpDAQDll.dll : fatal error LNK1169: one or more multiply defined symbols found
I want to ignore NiFieldPoint71D.lib from using project setting(Linker->Input->ignore Specific Library ) but still it is showing same error.
In the project Setting I am done following setting:
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
Linker->Input->ignore Specific Library: mfcs71d.lib;libc.lib;'NiFieldPoint71D.lib
Please provide some solution.
Thanks
NityanandYou posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231 -
I am Migrating a application in Visual Studio 2005.
In my development PC I was install the Measurement Studio 2009
my application is Showing following error:
1>Linking...
1>LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
1>Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDll\Debug\BuildLog.htm"
1>NICfpDAQDll - 1 error(s), 0 warning(s)
In the project Setting I am done following setting
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
but in "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";" directory Not having the 'NiFieldPoint71D.lib' because Measurement Studio 2009 not provide this dll.
Please provide some solution.
Thanks
NityanandYou posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231 -
I am Migrating a application in Visual Studio 2005.
In my development PC I install the Measurement Studio 2005.
my application is Showing following error:
1>Linking...
1>LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
1>Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDll\Debug\BuildLog.htm"
1>NICfpDAQDll - 1 error(s), 0 warning(s)
In the project Setting I am done following setting
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
but in "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";" directory Not having the 'NiFieldPoint71D.lib' because Measurement Studio 2009 not provide this dll.
Please provide some solution.
Thanks
NityanandYou posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231 -
Preview gives error "The file ... couldn't be opened because you don't have permission to view it."
Yesterday I could access all my pdf´s with Preview. Today I get the error "The file ... couldn’t be opened because you don’t have permission to view it." upon opening a pdf file with Preview. All other pdf viewers open the files with no problem.
I repaired permissions with disk utitlity with no success.I booted into recovery and repaired disk permissions with the disk utility from there. That fixed it. Apperently it repairs more stuff than when you´re booted into the OS. But what an annoying bug, this happened twice to me already by now...
-
The file "x.numbers" couldn't be opened.
I don't use numbers on the Mac often, so don't know how long this problem has been there for (I generally use the iPad version). When I try and open any of my iCloud saved versions it comes up with an error: The file "x.numbers" couldn't be opened. This happens with all of my documents, all of which open fine on the iPad or iCloud.com. If I download the document from iCloud it will open from my computer. If I then save it back to the cloud I can no longer open it. Everything is up to date, with the latest version (OS 10.9.4, Numbers 3.2). Any advice?
Hi Stephen,
Apple Menu > System Preferences > iCloud
Have you ticked Documents & Data?
Regards,
Ian. -
Textedit won't allow me to save .txt file "The file "Untitled.txt" couldn't be opened."
I have searched for this but couldn't find the answer for it. Everytime I use textedit and then tried to save my file I get the following error "The file "Untitled.txt" couldn't be opened." I am trying to save the file to my desktop with .txt extension but still not able to do so and it is driving me crazy.
I have recently upgraded to Mavericks 10.9.2 - there are a number of glitches that I have noticed. Hopefully Apple will remedy the issues soon.
Recently TextEdit has been behaving weirdly.
I type a document and go to save and I get the following:
I think you'll agree that the document exists, this is a screenshot of it.
I know there is a "/" in the name and that Mac doesn't like it but the same problem exists with whatever name is used and in whichever location is selected for the save.
Having run Macintosh since OS 8.6 I do have some working knowledge of how to resolve problems. My immediate action was to reboot the system. Nothing - same issue. I then moved to the Preferences directory (~/Library/Preferences) and did the usual trashing of the applications preferences. I noticed that in Mavericks there are way more associated preferences for each app. Nothing ventured, nothing gained, I trashed the lot and emptied the trash. I was not able to empty the trash entirely - the system informed me that one of the documents was in use. I did not have TextEdit running. I removed the offending file from the command line using rm.
I then rebooted the system again and opened TextEdit and tried again and lo and behold the documents were able to be saved. However on inspection of the Preferences again I now find that TextEdit seems to have no preferences? See the Spotlight search below.
Whilst I tend to adhere to the adage "if it ain't broke - don't fix it" in this case I would really rather like to see the TextEdit Prefs.
Maybe there is a Mac-guru out there that can explain a) what is going on here b) how to reinstate some prefs for TextEdit as it would seem pretty normal that they exist. and c) what happens if TextEdit throws a wobbler again, I have no prefs to trash
At this time of writing TextEdit seems to be behaving normally aside from the above mentioned prefs issue. -
The file "Untitled.pages" couldn't be opened.
Hi, how do I correct this error - I can't save anything in pages!
- The file “Untitled.pages” couldn’t be opened. -
Thanks,You have to tell us more.
What version of Pages?
Where are you saving to?
The message is an opening error and you are saying you can't save?
Which is it?
Why is it called Unitiled?
Peter -
Protected View Error "The file is corrupt and cannot be opened"
All
I have a problem with Protected View in Office 2010 on Windows 7.
Symptom: When downloading a file from the Internet, the file will not open if launched directly from the source location, or saved locally and then opened. This
is impacting both Word and Excel. I haven’t tested other applications. The user gets the error "The file is corrupt and cannot be opened.".
Expected behaviour: Documents should open in Protected View because they are coming from an untrusted zone (Internet Zone).
Troubleshooting Results:
- If I turn off Protected View the error goes away and the documents open without
issue (but not in Protected View obviously)
- If I save the file locally, then copy it to a network drive, the problem goes away (because the zone information is changed?).
- If I save the file directly to a network location, then open it, the problem does not impact me (also doesn’t open in Protected View)
- If I repair Office the problem is NOT fixed
- If I reinstall Office the problem is NOT fixed
The problem doesn't impact all machines, but any new machine I build suffers the problem. All Protected View options are set by group policy and all machines are getting the correct settings.
- The setting “Enable Protected View for files originating from the Internet” is enabled
- The setting “Enable Protected View for files located in potentially unsafe locations” is enabled
- The setting “Enable Protected View for Outlook attachments” is enabled
- Enable Data Execution Prevention mode is enabled
Has anyone seen this problem or can anyone offer suggestions of where to start looking for the root cause? There are lots of postings on this around the various Internet forums, but most
just suggest turning off Protected View, that is not a valid solution to my mind, Protected View is there for a very sound reason and it is not something I'm willing to turn off, especially when it is working on some machines as expected.
Thanks.
James.Thanks for coming back, James, and I'm glad you've found the source of your
problem.
As an aside, I had no idea HP made software like that and will take a look
at it - or would if I could. Personally, although I love their hardware, I
wouldn't touch HP software, and the fact that their web page doesn't load
(in IE8) just reinforces my feeling.
Enjoy,
Tony
www.WordArticles.com
"jsc.19" wrote in message news:f9aaa05d-ad62-4f0e-96e1-6bbeb4c7098d...
> Will, thanks for taking the time to post some suggestions. I understand
> Protected View perfectly well and my post is because Protected View is not
> behaving as it should. I think my dot points above show this, still,
> thanks for taking the time to post. I think Tony is more on track with
> his questions around what has changed in my build, and this is the area
> I've focused on over the few days since posting.
>
> I've pulled my build apart and put it back together and found the issue.
> This was tedious to say the least, but turned out worthwhile. A program
> we used called Trim Context Desktop
> (http://h71028.www7.hp.com/enterprise/w1/en/software/information-management-trim.html)
> is part of our SOE. This is a records management tool, but we only use a
> small feature set, and all the Office integration options that can be
> configured during install are turned off, but it turns out that the
> application still impacts Office. If I uninstall the Trim client from our
> SOE, Office Protected View starts working as expected. We knew the full
> Trim suite wasn't ready for Office 2010, but assumed, wrongly, that since
> we didn't use the Office integration features we were OK. All our testing
> was around the application and it works fine, I just didn't connect it to
> the Office issues until systematically eliminating changes from the SOE
> build. Keep a log of your changes!!! It helped me reverse things until I
> found the problem.
>
> Uninstalling Trim also fixes and issue I had in Outlook where the
> previewers wouldn't display Office documents, reporting that the
> previewers were not installed.
>
> We will go to HP to get some support and advice around this before putting
> Trim back in to the SOE.
>
> Anyone - if you have similar problems, can I suggest you look at all your
> Office add-ins and also any applications that may potentially hook in to
> Office.
>
> Cheers all.
>
> James.
>
>
>
Enjoy,
Tony
www.WordArticles.com -
What can I do if I get the message "The file "MyFile.numbers" couldn't be opened.
When trying to open a file that I've worked on before, I get the message "The file “MyFile.numbers” couldn’t be opened." What can I do?
Please review this information:
https://discussions.apple.com/docs/DOC-6991 -
Outlook 2010 error - The file is corrupt and cannot be opened
Hi experts
Im getting the error - "The file is corrupt and cannot be opened", when opening office attachments in outlook 2010.
I’ve tried disabling the protected view options in office which hasn’t fixed the issue, the only suggestion I have seen which I’m sure would work is to delete
the user profile and recreate. This seems a bit over kill to me, does anyone know what files I need to remove to fix the issue.
ThanksHi,
You can try using the Fix it tool in the following KB article to fix the issue:
http://support.microsoft.com/en-us/kb/2387587
Hope this helps.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
When I try to open images I am getting this message: "The file “image.jpg” couldn’t be opened because you don’t have permission to view it." "Which I've tried - but it's not responding, plus its with all images now. Can anyone help?
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.iBooksX
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
When I try to open a pages document on my mac book pro it says "The file 'thesis.pages' couldn't be opened." But i can open the same file on my iPad and iPhone without a problem.
Thanks very much for the instructions. I encountered this problem this morning myself and the recommendation fixed the problem immediately. When things like this happen with iCloud and Pages it makes me wonder if I might be better off using something else, having just recently had to fix the problem that the current Pages can't read documents I created with a much earlier version until they were "upgraded" by an interim version.
-
The file "aaa.jpg" couldn't be opened because you don't have permission to view it
The file “aaaa.jpg” couldn’t be opened because you don’t have permission to view it.
This message is coming up every time i try to look at a photo on my Mac . This is new ... does anyone know what has happened?Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’renot going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
"The file "keyedobjects.nib" couldn't be opened."
I'm doing my first backup to time machine and have checked the logs and see the following:
"The file “keyedobjects.nib” couldn’t be opened."
"The file “objects.nib” couldn’t be opened."
Please can you advise?
Thank you.Yes thanks, it completed and took a very long time but it was my first backup I did with my new laptop, so I think this is expected.
Maybe you are looking for
-
I was working with my iPad 4 it went of suddenly and cannot operate it again?
I was working with my iPad 4 it went of suddenly and cannot operate it again?
-
Opening a directory window on App Server?
I have a directory on my application server where Oracle Reports creates output files and I would like to have a button on a 10g form that opens this directory window. Anyone know how to do this?
-
Maps not working in Organiser (Photoshop Elements 9) - anyone else have the same issue?
Can you assist? Already uninstalled and reinstalled
-
Hi We would like to use transaction W_PRICAT_MAINTAIN to receive Material Master and Pricing data from a vendor (who is also on SAP). 1. Does anybody know if it is possible (or safe) to use PRICAT even though our SAP system is NOT a SAP-Retail system
-
I am leaving for vacation in a few days and i go to update my ipod to get some more tv shows and movies on it. When i open itunes this message appears: "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." i tried