1 macbook can't see time capsule?

in the household we have 2 macbook's 1 pro 17" & 1 air & 2 iphone's 2G's
I originally set up the time capsule to be 802.11n only (5 Ghz), to keep the
speed at the highest level, even though the 2 iphones couldn't connect (802.
11 b/g only).
today, after the macbook pro 17" was asleep, upon awakening it could not see
the network (it had been connected and running fine for over 6 months), although
it could see neighbors networks? the macbook air was still connected to the network,
the network working properly?
I repaired permissions on the macbook pro 17", re-booted, and still could not see the
network, although the macbook pro still remained connected? I re-booted the time
capsule, still no connection on the macbook pro 17"?
I changed the radio mode of the network to 802.11n (802.11 b/g compatible) and the
macbook pro 17" saw the network and could connect, along with the macbook air and of
course now both iphones?
why would this happen?
I originally set up the network at the 802.11n only (5 Ghz) radio mode to eliminate
interference and keep the iphone from degrading the through put to b/g speeds, as
we move large files back and forth between computers, so I'd really like to go back to
802.11n only (5 Ghz) speed if possible, but can't figure out why the macbook pro 17"
won't/can't see this speed even though it has in the past for over 6 months?
both macbooks are running leopard 10.5.6, the 17" is 2.4 Ghz, teh air is 1.6 Ghz.
no software or modem updates have been done during or before this problem period.
any help would be appreciated...

after configuring the network back to 802.11n only (5 Ghz), magically the network re appeared on the 17" macbook pro, everything was fine for the last week, then mysteriously the 17" pro lost any vision of the 802.11n only (5 Ghz) network, albeit the macbook air kept connection and through put was fine?
after turning the airport off/on on the 17" and then manually trying to connect, the network (still 802.11n only (5 Ghz) appeared again on the selectable airport of the 17"?
anyone got help?
is this not posted in the right forum?

Similar Messages

Macbook can't see time capsule through airport utility; powerbook can.

This question probably applies to Airport Extremes as well as Time Capsules, but I happened to see it with a new TC.
My Time Capsule came in yesterday. My plan was to bridge it into my existing network to serve 802.11n over 5ghz. I did the initial setup using a 12" powerbook and it worked fine. I set the Time Capsule in bridge mode and for 802.11n 5ghz, plugged it into my network, and reset. The light on the TC turned green and all looked like it was working. At least, until I tried to connect through my Macbook Pro.
I installed the Airport Utility software that came with the TC, rebooted, then launched Airport Utility -- and it couldn't find any devices. It can, however, see the Airport's wireless network. After a reboot of the TC, it can also connect to the Airport's wireless network. I can get to the internet and the local network, but cannot see the Airport through Airport Utility and cannot see the Time Capsule disk. It's as if Bonjour is being blocked between my laptop and the Airport. This happens whether I'm connected to the TC wirelessly or wired.
I've tried restoring to factory defaults and starting over (I still can't see the TC, even after a hard reset) and I've tried a hard reset of the TC (I had to, actually -- it hung during startup several times). In each case, the powerbook can see it, but the macbook can't. I'm out of things to try. If I can't get this resolved soon, I'm going to have to return the TC, since it's useless if I can't access the disk.
I was planning on upgrading the two computers to Leopard over the weekend, then use the TC for Time Machine for both computers, but if it's not working for Tiger I'm worried that it won't work for Leopard, either.
Is there any variable anyone knows of that blocks a computer from seeing an base station through the Airport Utility? A non-obvious firewall setting, perhaps, or something that could be blocking Bonjour? Does Airport detection even use Bonjour, or am I on the wrong track?
Thanks

An update: I can see the Airport configuration of the TC through my Macbook if I pick File->Configure Other... on the Airport Utility, and then put in the IP address. Which leads me to believe that it's a Bonjour issue, but I haven't figured out more than that.
Of course, the TC is still useless for Time Machine if I can't get to the disk, so the problem remains.

Mac can not see time capsule

i bought Time capsule over Amazon .Air port works fine , but my mac can not see time capsule,,,sometime does , but most of the time not...
It is a problem with time capsule i have 2 T new generation

You don't mention what type of Mac you have, but is there any way you can move it around to see if that affects the problem? If you hold down an "option" key while you pull down the AirPort/WiFi menu bar item, you should see a value labeled "RSSI" that is the strength of the wireless signal. A value closer to zero is stronger. For example, -30 is decent but -80 is poor.
By the way, you don't seem to have declared any of your system details in your profile or didn't select your details to be included in your post. Those can help people give you correct advice. To update that, click on "Your Stuff" near the top of a window on these discussion groups, then on "Profile". Scroll down to "My Products" and either edit an existing one or add a new one.

IPhone 4S Can't see Time Capsule Wireless after IO6 update

My iphone can't see my Time Capsule wireless network after upgrading to IO6. My iPad3 works fine after upgrade.
I determined that if I change settings on the TC to 802.11N(b/g) compatible it can see/connect.
Seems to be a problem with the 802.11 5GHz band that the iPhone can't see after the IOS6 update.
Not sure if this is the same issue that others are seeing but could be worth a try to change your router's radio config.
Hopefully Apple sorts this out soon.
Very annoying to upgrade and have existing networking break!!!!
Bad Karma and I just ordered 2 new iPhone 5's

Still having this issue - used to be able to connect prior to this update - The iPhone has no problem auto joining the local Cable WiFi - but still doesn't show the Time Capsule WiFi SSID's in the list. iPad and three other Macs see and can join the Time Capsule WiFi.

Can't see Time Capsule in finder using Yosemite OS

I'm using Yosemite 10.10.1 on my MacBook Pro and I just purchased a 1TB time capsule to replace my Belkin wireless router and WD external hard drive. I have my wireless network configured and am able to connect to the internet/connect wireless printer, but I cannot access Time Capsule in Finder. Any help is greatly appreciated.

Welcome to Yosemite.
Open up System Preferences, then open Sharing
Check to see if the name of the Mac appears correctly....and there is not a (2), (3), (4) etc appearing as part of the name.
Some users have reported that turning off the firewall on their Macs has helped with this issue.
It may...or may not....help to make sure that the settings for IPv6 are set to Link Local Only on your Mac
Open System Preferences.....
Open Network > Click on WiFi > Click on Advanced > TCP/IP tab > Configure IPv6 set to Link Local Only > OK > Apply
Network > Click on Ethernet> Click on Advanced > TCP/IP tab > Configure IPv6 set to Link Local Only > OK > Apply
One of a number of articles that are appearing about the bug ridden Yosemite operating system:
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Windows can't see Time Capsule. Should I reset?

Hi,
only had my MacBook 4 months so this is all still rather new!
I setup my Time Capsule without any problems and use it for my Time Machine backup. My wifes PC (running XP SP2) could see the HDD and I copied her photos onto it. Now her PC can't see the disk!
How can I fix this? Should I reset the Time Capsule? Will that delete the backup?
BTW the few "Why does it do that?" moments are vastly outnumbered by that "Oh that's nice/clever/cool!!!" ones.
Thanks

Hello bsalisbury1. Welcome to the Apple Discussions!
When running your Gateway under WinXP, can it see any other wireless networks in the area? If not, then there may be something wrong with the WinXP driver for the Linksys card or the card is not configured properly. Is your Time Capsule (TC) wireless network encrypted: WEP, WPA, or WPA2? If it is, and you temporarily disable it, can the desktop see the TC network now?

Vista can't see time capsule

Hi everyone
Just got a new time-capsule. Set it up within minutes on our 4 macs, but the Vista PC can't see it. Installed the airport utility software, but to no avail. It just does not show up in the available networks list.
Any ideas?

I was having similar problems with an XP machine - could not see the time capsule via Airport Utility. I just finished a call with Apple support and they suggested it had to do with the security settings - but that was as much as they could offer at the time ... but they were right!
Via the macbook, I started by knocking down the security to nothing at all (I had previously configured the access by MAC address so didn't feel all that vulnerable for the few minutes I'd be making changes). Originally, it was WPA2 and the XP machine could see the network but never get an address.
After the time capsule updated and, I was able to rescan and see it for the first time on the XP machine. From there, I configured the time capsule via the XP machine using Airport Utility (and if this works for you, via the Vista machine). I set it up for WPA/WPA2 personal. I tried WPA from the start and for the first time, I got a message indicating that the card in my XP machine didn't support WPA2.
Anyway, after updating those settings and letting the time capsule recycle, I was all set and secure on the XP machine. From there, all I had to was go back and connect and supply a password on the macbook to re-establish a connection there.
Message was edited by: atticwalker

Setup problem and now can't see time capsule

On Friday, I used Airport utility to set up Time Capsule. There was a choice saying "do you want to add on to or replace and existing router?", to which I said yes. at the end of the setup, Airport asked "Do you want to replace the existing router now?" and I said no because I don't want to replace it yet. That seemed to confuse Time Capsule.
On Monday, I disconnected the existing router and I tried to hook Time Capsule up to the DSL modem. Time Capsule didn't recognize the internet and my computer wouldn't recognize TC. Time Capsule is now not connected to anything (I reinstalled the old router and it is working fine). My computer can't see it an neither can Airport Utility. I tried to rescan but nothing comes up. Does anyone know what is wrong and how I fix it?

The only way to tell is remove the drive and test it.
I would do a reset of the TC first. Just hold in the reset button for about 7sec and wait for it to reboot. A reset will not do anything to your files. Then try again to access. If no luck the drive is probably dead. Either replace the whole TC under warranty.. or if you have no warranty left/drive contains valuable info, open up the TC.. plenty of sites explain how to upgrade to a bigger drive. just follow them. Put the drive into a USB carrier and plug it in or even better use it directly on sata port.

Can't see Time Capsule disk

Hi there, need some help. I can no longer see my Time Capusle disk (and it's not performing back ups). I've just moved and set my time capsule back up as my wireless router last night. All seemed to be working fine. Came home from work today and could here strange noises coming from it. Couldn't see the disk in finder, disk utility or in airport utility (wireless working fine). Restarted it. Airport now tells me that there is a problem with the disk in the TC and that it needs repair. Still can't see the disk to reapir it in Airport Utility, Disk Utility or Finder. Have plugged in via ethernet and still nothing.
Any advice?
I'm running Mac OSX 10.7.5

So far, everything points to an internal hard drive failure. Unfortunately, Disk Utility will not be able to repair a drive that has failed mechanically.
If you have an Apple Store or servicer in your area, you should take the Time Capsule to them to let them have a look.
If the Time Capsule is in warranty or covered by AppleCare, Apple will likely replace the entire Time Capsule for you...but I would not expect them to offer to retrieve any of the data on the failed hard drive.
If the Time Capsule is not covered by warranty, you can open it up and attempt to pull the drive and replace it yourself....or have a shop do it for you. A data restoration service might be able to retrieve some of the data on the failed drive, but the cost of this procedure will shock you.
I don't go inside the Time Capsule much anymore, but our resident guru LaPastenague does this on a regular basis. Hopefully, he will see this post and offer his comments and advice.
He has offered excellent tips and instructions on repairs in this document:
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s

Can't See Time Capsule from PC

I have two PCs hard wired into a Time Capsule. When I set them up a few months ago, both PCs added the Capsule as a Z drive. Now the drive is gone from one PC but still accessible from the other.

Try this:
First see if you can see the TC on your network and if so, click on "computer" and then "map network drive". Select Z if it is not already selected, and then browse. Pick the TC and click through. Close the window and click on "computer" again and you may see it. It worked for me.

Macbook can't find Time Capsule anymore

I bought a 2TB Time Capsule and hooked on a 1TB external hdd to it. All my files and music are on there. My Macbook Air can't find my Airport Time Capsule all of a sudden. It regularly disconnects since they day I got it but since yesterday it can't connect anymore. Internet works fine though. The utility app tells me that it used to be in my network but now isn't anymore. Could it have something to do with adding my iMac to the network? Any thoughts?

Yosemite is unreliable OS.. especially on network side.. it has multiple issues.
I have no idea what Apple thinks they are doing but a fix still has not arrived.
Here is the list of things which help but may not cure it.
A factory reset of the TC is the start.. it is required so you can find it again.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.

Macbook does not see time capsule

I just purchased a time capsule to use as router an d backup. I connect using a DSL modem. I set everything up as instructed but could not find the time capsule using the time machine utility. I had to plug in an ethernet cable from time capsule to my macbook to set up the network.
When I tried to find the network using airport wirelessly, the network is not listed.
I have tried all sorts of things -- unplugging all and reconnecting as required etc etc.
Everything works fine -even backups - as long as I am wired in. However, the whole point is to go wireless.
Any thoughts???
Thanks

kailuamacnut,
Welcome to the Apple Discussions!
Is the light on the TC green or amber?
Does your Airport menu show 4 solid bars? Or is it empty?
Once the network is created using the Airport Utility, you must use your Macs' Network Preferences to 'join' the new network you just created.
Cheers!
Message was edited by: Glenn Carter

Airport Utility can't see Time Capsule

Just purchased an almost new Time Capsule from a friend.
But Airport Utility cannot see the devise, therefore I cannot set it up.
Ideas, hints.. help anyone?

Hello Marta Santos. Welcome to the Apple Discussions!
When having difficulties accessing the Time Capsule (TC) thru the AirPort Utility, try the following, in order checking accessibility with the AirPort Utility after each step:
o Check the local connection. If you are trying to access the TC wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the TC's LAN (opposing arrows) ports.
o Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
o Perform a "hard" reset on the TC.

Windows 8 can't see time capsule

I am connected to the Airport and the internet, but cannot see the Time Capsule drive in Windows 8. What do I need to do?

Open windows explorer and type into the address bar.
\\TCname or \\TCIPaddress
Replacing that TCname or TCIPaddress with the ACTUAL TCname.. Must be SMB compatible.. short, no spaces and pure alphanumeric .. of course.
Or the TC IP address eg 10.0.1.1
If it fails have you loaded bonjour for windows .. there is none yet for win8 so try and load the win7 version.. alternatively use the whole Airport Utility for windows.
Set the guest account to read and write in the TC and set workgroup to WORKGROUP.

Mac suddenly can't see Time Capsule

So, I took my Mac and TC off a wireless router today and tried to connect to TC without the router. The light won't stop blinking amber and my Mac can't see any sign of the TC. I've tried resetting the TC, unplugging it, nothing helps. Also, and it may be totally unconnected, but my mac just lost about 20 gigs of free space. Any ideas?

I have exactly the same problem. I took my TC and router offline and went away for a week. Came back, all I can get from the the TC is a flashing amber light. The powerbook will not recognise the TC is connected via wireless or ethernet. Very frustrating.

1 macbook can't see time capsule?

Similar Messages

Maybe you are looking for