1 macbook pro and 2 time capsules

I have 1 macbook pro retina and 2 time capsules.
The time capsule at work i want used to backup my work related content, and the time capsule at home i want used to backup my personal content.
I don't want to exclude the same folders for work time capsule and home capsule.
Can this be done?
Thanks

Look at one of the other backup utilities.. TM whilst convenient has plenty of other alternatives..
For a simple folder backup you should be able to script a backup as a rather simple file copy. I am not sure what is available in the Mac world to do this but but I used similar tools that simply script a zip backup of working folders in windows.. that worked very well.

Similar Messages

  • MacBook Pro cannot locate Time Capsule on Verizon Wireless Network

    Here's what I have: both my MacBook Pro and my Time Capsule are connected to the same wireless network. (I used the "join an existing wireless network" on the Time Capsule.) But when I go to back up, it says the disk is unavailable. And when I open the Airport Utility, I don't see my Time Capsule. Any ideas?

    Welcome to the discussions!
    It can be a tricky proposition to configure the Time Capsule (TC) to "join" another wireless network because the settings on the TC and network must match exactly.
    Try temporarily connecting an ethernet cable from your computer to the one of the LAN <-> ports on the TC to see if that will allow AirPort Utility to "see" the TC.
    If this does not work after a few tries, you'll need to "hard reset" the TC by holding in the reset button until the amber light blinks more quickly. Keep holding a few more seconds and then release.
    Open AirPort Utility up and it should find the TC. Try the following setup:
    Click Manual Setup
    Click the Time Capsule tab below the icons to assign a name, device password and adjust Time Zone settings, etc.
    Click the Wireless tab
    Wireless Mode = Join a wireless network. If you don't see this choice, hold down the option key on your Mac while you click on the selection box
    Wireless Network Name = Exact name of your Verizon wireless network
    Wireless Security = Exact same setting that your Verizon router is using. This is where almost all "join" errors occur because the settings don't match exactly. Even when they do, there can sometimes be problems.
    Wireless Password = Same password as your Verizon wireless network
    Verify Password
    Click Update. Close AirPort Utility. The TC should restart in 15-20 seconds and you should have a green light. Log onto your Verizon wireless network and you should be able to "see" the TC now. To confirm, open Macintosh HD and look for the Time Capsule icon under the SHARED heading on the left side of the window.
    If the TC is located close to your Verizon router, it is easier (and more reliable) to configure the TC to connect that way, rather than using wireless. You'll still be able to perform backups over your regular Verizon network. Post back if this is an option for you and we can go over this type of setup.

  • How to backup MacBook Pro without AirPort Time Capsule or External hard drive

    How to backup MacBook Pro without AirPort Time Capsule or External hard drive

    This is crude but if you need a work around, just plug the USB drive directly into the iMac.. copy the files to it.. then plug it into the TC.
    You also do not need to use the TC as an intermediary between your iMac and MBP.. just turn on sharing in the computer.. so you can directly copy files from one to the other.. Macs have public access directory preconfigured for each user account.
    As far as mounting the TC..
    In finder use Go, Connect to server.. and type.
    AFP://TCname or TCipaddress
    Where TCname is the actual name of the TC.. I strongly recommend you follow SMB network rules.. ie if your TC has a name like
    Fred Blog's Time Capsule 2445566.
    It is too long.. it has spaces and it has non-alphanumeric characters.
    Shorten it to FredTC
    No spaces no characters that are NOT alphanumeric.
    TCIPaddress is simply the standard IP.
    You can also use CIFS://TCname which according to the article forces the connection back to SMB1 rather than SMB2 which as usual is broken.
    But I would definitely use AFP if possible. I cannot understand the decision to move to SMB as standard.

  • I am trying to register my macbook pro and every time i got a message telling me that this product is registered with different apple id, how it comes?

    I am trying to register my macbook pro and every time i got a message telling me that this product is registered with different apple id, how it comes?

    Sounds like you got a used computer and paid new for it, that's illegal.
    "Open box" is a return by a previosu customer and can't be sold as new, you should have gotten a discount or informed of such.
    Once obvious sign is it doesn't come with free iLife on it, as the drive was erased.

  • I have a new MacBook Pro and every time I open Safari it locks up???

    I have a new MacBook Pro and every time I open Safari it locks up???

    Okay, then you have made a whole bunch of trouble for yourself. First, download and run this:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    and then you can manually remove as many bits of PSE as you can find. Not only the application itself, but also in hard drive>library>application support>adobe. And go to your username>library>preferences and delete everything there pertaining to PSE. That library is hidden. To see it, click the Go menu in the Finder and hold down the Option key and it will appear below the little house for your user account.
    Then go here to download the installer and install it from scratch. You can never move an installed copy of PSE (except for the app store version):
    Download Photoshop Elements products | 9, 8, 7

  • Back and sharing solution for Macbook Pro - Synology or Time Capsule?

    Hi
    Hi,
    My plan is to have a complete new efficient and flexible set up. I have decided to buy the new Macbook 13inch Pro with 16MB Ram and 3.1 Ghz i7 processor with 256GB glash drive.
    I want an external solution for my storage and sharing needs.
    Minimum requirements -
    - Time Machine backup support for computer
    - External storage for 95% of my data (kind of like dropbox) including music, movies, photos, business and personal data, but that can be accessed easily and quickly and functions properly on my computer. (e.g when connecting to itunes and other apps)
    - Remote access to this data when required
    Additional Preferences
    - Easy to use (I am a newbie on Mac laptops!)
    - Back up additional devices or at least upload photos from ipad and iphone
    - Connect movies to Roku
    - Easy access to data wirelessly from outside the country
    - Support external plugin hard drive
    - Quiet and low power consumption
    I like the flexibility of the Synology but I know that apple usually works best with apple devices, so due to my inexperience in the apple environment I need a little help.
    Is the Synology best for my needs (if so which model) or the Time Capsule and just plug in my usb hard drive? (I don't want to spend a fortune but $100 more for the best set up is acceptable)
    Thanks so much for your help
    Mike

    A third-party NAS is unsuitable for use with Time Machine, especially if it's your only backup. I know this isn't what you want to hear. I know that Time Machine accepts the NAS as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you try to restore, and find that you can't.
    Apple has published a specification for network devices that work with Time Machine. None of the third-party NAS vendors, as far as I know, meets that specification. They all use the incomplete, obsolete Netatalk implementation of Apple Filing Protocol.
    If you want network backup, use as the destination either an Apple Time Capsule or an external storage device connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
    Otherwise, don't use Time Machine at all. There are other ways to back up, though none of them is anywhere near as efficient or as well integrated with OS X. I don't have a specific recommendation.
    If you're determined to use the NAS with Time Machine, your only recourse for any problems that result is to the manufacturer (which will blame Apple, or you, or anyone but itself.)

  • Super SLOOOOW file transfer from MacBook Pro Retina to Time Capsule over WiFi - why?

    So I have been having a search around and it seems like the advice for folks complaining about ludicrously slow wifi transfers from their Mac to their Time Capsule is... to do it wired.
    As you may know, the MacBook Pro Retina does not have a cable Ethernet port. So I have to buy a Thunderbolt-to-Ethernet adaptor (and a cable if I don't already have one) just to perform this basic task? Seems hard to believe.
    MacBook wifi is showing as connected via 802.11n to the Time Capsule and the link speed is showing 217 Mbps in Network Utility.
    So why is it so slow?

    Thank you, LaPastenague - very complete answer!
    How is the old NAS connected to the TC?
    What actual speed are you getting?
    It is important that when you select an option you stop other options from interferring.. ie.. turn off wireless when you do ethernet.
    First, I had the NAS connected to the laptop (Dell XPS M1710, Win7 - (yeah, I know, but it does the job, still)) via USB, which generated about 900KB/S r/w speed,
    then I tried connecting it via LAN to TC, but didn't succeed in getting TC recognize the drive,
    lastly, I connected it via the USB port directly to the TC, and got ~900KB/S r/w speeds again.
    In all scenarios, the laptop was connected via LAN as well (TC's WiFi was not disabled, though).
    Then I read the above thread and tried finding DHCP settings. Found them in the "internet settings" in the airport utility, but not in the "dive settings", so I didn't know what to change there.
    Strangely, the only thing that I changed was the TC-name, taking away a hyphen and a space (from "myname's TC" to "mynamesTC"), which resulted in faster r/w speeds, going from the 900KB/S to 1.5MB/S (still not what I expected).
    Also that any copying of files will be a loop, old NAS--Computer.. Computer--TC
    Got it. Tried to provide a faster connection by directly connecting old NAS to TC via USB, but makes sense.
    Each connection is just as impportant as the other. Plus you can see the computer must handle every packet in a double hop tx, rx tx rx for each one. So using gigabit all the way is vital.
    Will try again connecting old NAS to TC via GB-LAN, and have it recognize it, and provide and update here. 
    This is best done in full isolation from internet.. just setup so you can do the copy overnight.
    I was planning on doing several actions of moving files in a session of re-organizing, and am not really keen on waiting 4-6hrs between each step. The old NAS shall host all videos later, as it is recognized by the PS3 when connected via USB, while the TC shall host all photos and music, which I am rather accessing from the laptop's itunes.
    And also to realise lots of very small files can copy extremely slowly.. no matter how fast the connections are.. it is heaps of small files that cause copying to take forever because files are written to the disk and then file allocation tables are filled in for every one. It is why a backup is much faster as files are compressed into single large file. Or like TM using 8KB bands where the file ends are handled differently to normal disk.
    That will have added to the slow-ness of the session last night, as I was copying 25GB of photos which took 6hrs (***). So that would have been faster if I compressed them to .zip before moving? (not because it reduces size, as it barely does, but becuase it puts many small files into one big one?)
    Just moved a 164MB vid from laptop to old NAS (which is still connected to TCs USB port, while laptop to TC via WiFi): result: 1minute40secs @ 1.70MB/S.
    Then moved same vis from laptop to TC: 1minute55secs @ 1.80MB/S (gaining write speed slower that old NAS, therefore taking longer despite higher final speed).
    So, is there any further improvement / setting that I could change (DHCP / NAT) to get to higher r/w speeds, like the 6.75MB/S quoted above?
    Thank you again! MFP

  • I bought 2 mac book pros and have time capsule connected to router. Both computers can see time capsule but i can not see other computers.

    I bought 2 mac book pros. At home i already had a network with a timecapsule connected to a router and a windows xp lap top connected to it. When i turned both macs on i was able to see the time capsule and the windows xp computer HOWEVER neither mac could see each other......any help would be appreciated.
    Nick

    Thanks Linc ......you were right on the money. Your help has been awsome. I spent 3 hours last night doing stuff with out any solutions. May I ask you another question if you have the time and patience please. My orriginal setup was 2 windows laptops with XP on them connected with a timecapsule attached to a router. Hence the time capsule made a wireless signal aswell as being an external hard drive. On one of the laptops i have a printer attached to it which was shared so that the other computer could print documents through the network however the computer attached to the printer has to be on. Do you know what i have to do so these new 2 mac book pros can print to that printer? Thanks again for all your previous help. Nick

  • I just bought a mac book pro and airport time capsule. Which one should I turn on first to get it going. We do have an existing router and old PC in the house.

    Hi
    I just brought home a mac book pro 13" with retina and the airport time capsule . What one should I turn on/ hook up first? We have an existing router in the home and an old PC.
    Suggestions?

    Turn off you cable/DSL modem, your computer, and the old router. Disconnect the computer's Ethernet cable from the old router. Replace the old router with the Time Capsule. Connect the Ethernet cable from the modem to the WAN port on the Time Capsule. Connect the computer's Ethernet port to one of the LAN ports on the Time Capsule using an Ethernet cable.
    Turn on the modem and wait until the status lights indicate connection with the ISP. Turn on the Time Capsule and wait for the amber light to begin flashing. Open Airport Utility in your Utilities folder to configure the Time Capsule.
    If a user guide came with the Time Capsule I suggest you follow it's instructions.

  • I bought a new MacBook Pro and every time  I open Adobe Photoshop Elements 9 quit unexpectedly.

    Has any one had trouble opening Photoshop Elements 9 with the new MacBook Pro?

    Okay, then you have made a whole bunch of trouble for yourself. First, download and run this:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    and then you can manually remove as many bits of PSE as you can find. Not only the application itself, but also in hard drive>library>application support>adobe. And go to your username>library>preferences and delete everything there pertaining to PSE. That library is hidden. To see it, click the Go menu in the Finder and hold down the Option key and it will appear below the little house for your user account.
    Then go here to download the installer and install it from scratch. You can never move an installed copy of PSE (except for the app store version):
    Download Photoshop Elements products | 9, 8, 7

  • I was charge my MacBook pro , and suddenly shutdown him self , and I cannot switch it on again ???

    I was using my MacBook Pro , and same time I was plug it to charge , and suddenly shutdown himself , and at this time the battery was 80% , and I try many times to switch on again , but I cannot , I has this problem for almost two days now ,  I'm really worry about it , and I need to open it fast because all my work in there .
    Please I need your answer fast .
    Thanks

    Seems you might have a hardware problem. Like the Logic board has failed. your best option is to take the system to an Apple store to have it properly diagnosed as to the problem.

  • I have a macbook pro and use BT homehub 3.  can't work out how to connect my time capsule. can anyone help, thanks.

    I have a macbook pro and use BT homehub 3.  can't work out how to connect my time capsule. can anyone help?  thanks

    Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
    To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
    Press and hold in reset until the front LED flashes rapidly.. about 10sec.
    Release the reset.
    Open the airport utility and setup the TC to bridge mode.
    The actual method depends on version of the OS and airport utility you use.
    This is version 5.
    Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
    Then setup wireless.. you have a number of choices here.
    Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
    Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
    Update the TC.. unplug fromt the computer and plug it into the homehub.
    If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

  • I have a macbook pro and it won't ever complete a backup onto my time capsule

    About 4 months ago, I bought a new macbook pro and time capsule.  It seems to start backong up normally. Then about 2/3 of the way through its gets stuck backing up and never completes it.  I called apple care several times and they keep telling me just to let it run, but no fix for the problem.  The hard drive just continues to spin with no progress in data downloaded with the computer running slowly unless I stop the download.  Thanks to any one who can help. So far, I'm just frustrated with my commitment to switch all my computers over to mac. I have let downloads last for more than a week straight.

    Your problem is really with "Time Machine", backup software included with OS X since version 10.5, not with your Time Capsule router.  For more information on Time Machine, check these Web pages:
    Time Machine FAQs
    Time Machine Troubleshooting

  • I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

    I have a new Macbook pro and can't recall the password I used with my Time capsule - How can I (ideally) retrieve or possibly change the time capsule password?

    Remember security on a TC is an illusion.
    Simply press the reset button for 1-2 sec.. you must not do too long .. it will then hard reset.. but soft reset will revert all passwords to default for 5min. ie TC password is now public.
    Remember this the next time because anybody at all can change your passwords.
    Once into the TC you can then open the view passwords if you wanted any weaker security. Click and open the TC.. and click on edit.. then go to the top menu..
    Voila .. all your passwords in plain sight to any Tom Dick and Fred.

  • MacBook Pro and Time Capsule after adding new wireless router

    I have a MacBook Pro and Time Capsule (which functions wirelessly to router and computer). I added a new wireless router (netgear, not my idea) and had to change name of wireless network. Now Time Capsule flashes amber and does not show up in Airport Utility.
    Do I have to set up Time Capsule from scratch? If so, if you can aim me to directions I won't have to waste tech support's time.
    My additional question on a similar vein: I also have a Time Capsule (second time capsule) which is plugged into the wireless router using ethernet cable for use with a windows notebook running windows 7 which backs up wirelessly. Do I have to change anything on this Time Capsule (second Time Capsule) as a result of change in name of network (I've already adjusted computer to connect to network)?

    Hi DD,
    If you don't get answers here, try posting in the Time Capsule forum (http://discussions.apple.com/forum.jspa?forumID=1253) and/or the Time Machine forum (http://discussions.apple.com/forum.jspa?forumID=1342).

Maybe you are looking for

  • How to print from Array by skipping some indexes

    Hi, Upon doing some kind of computations I had an array a1[][][] whose values are as follows: a1[0][0][1]=10; a1[1][1][2]=20; a1[1][1][4]=3; a1[1][1][2]=20;Upon doing some computations, i definetly be getting the multiple copies with same index value

  • How to gain access to second Linux partition

    Hi, Before I start, I'd just like to say how impressed I am with Arch! I've only been using it for a week now, a bit less in fact, but it's already wowing me enough to make me think about changing my loyalties from Debian to Arch - something I though

  • Workflow to populate "Assigned to User" with AD group of the "Assigned to User" is empty or Null to user is empty.

    I am updating roles and would like to use the [me] and [my group] tokens for views.  I am planning on updating all the templates to specify an ad group in the "Assigned to User" field that corresponds to the appropriately selected support group.  I w

  • Compare E1EDP26 QUALF BETRG values

    Hello All, Was hoping you could help me wit the following issue I'm facing in an IDoc to File scenario. I'm tasked with a 'create if' statement comparing the values of BETRG in E1EDP26 with different QUALF values. For example: create target segment i

  • Cannot Download or Install Muse

    I have a Creative Cloud membership and I have tried to download Muse thru the Applications Manager and all it does is say downloading and the bar never changes..have waited for hours and there is no progress bar. In fact, the AAM won't even update cu