-1 Minus One for Firefox not working

I recently switched back to Firefox from Chrome and tried to download the -1 extension for Google+ from [http://gminus.nolofone.com/en here]. However, while it worked fine on Chrome, it doesn't seem to be working on Firefox, and I can't figure out why.
By the way, I understand that since Mozilla didn't create this extension, I technically shouldn't be posting my problem here, but I couldn't find a way to contact the makers of the extension. Any help would be appreciated. Thanks!

I'm not sure exactly what isn't working, but the developer of this add-on specified that it works up with a range of versions from Firefox 3.0 to Firefox 1337.* -- that fictitious maxVersion is no longer legal. The highest allowed maxVersion's at the moment are 14.* and 15.0a1 (versions in early testing).
You could "unzip" the extension and edit install.rdf to fix that, or contact the author and see whether he will do it. It is a hassle only being able to package the add-on for up to 3 new versions, but in many cases, even if he falls behind in updating the maxVersion the add-on will still work in new versions of Firefox.
For Developer Reference:<br>
https://developer.mozilla.org/en/Install_Manifests#targetApplication<br>
https://addons.mozilla.org/en-US/firefox/pages/appversions/
Author info: http://www.nolofone.com/lequipe/
Edit: This article describes the steps of "hack" the maxVersion in an extension: [http://www.techsupportalert.com/content/how-update-firefox-thunderbird-addons-n How to update Firefox or Thunderbird addons to work with a new release].

Similar Messages

  • Auto To working for one material and not working for other material

    Hi,
    Hope everybody is doing fine.
    I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
    I didn't setup the back ground processing job. Is that is affecting it?
    thanks for any help.
    regrads,
    KHAN

    Thnaks,
    You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
    Appreciate your time charlie

  • Default them for Mac not working firefox 4 beta 1

    Default them for Mac not working Firefox 4 beta 1
    == This happened ==
    Every time Firefox opened
    == I first opend FF4 beta 1 for the first time

    '''Ritrup''':
    Create a new profile as a test to check if your current profile is causing the problems
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird?

    Hello Firefoxies,
    Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird or any email app? I want to be able to insert all the links from a Firefox bookmarks folder automatically in to an outgoing email and include the names that I have given to those saved links / bookmarks.
    I searched for this add-on on the Firefox and the Thunderbird sites, but I don’t think the one that I found is for what I am thinking of.
    What I would like to do is to be able to add all the links in a saved tabs folder, or any bookmarks folder, from Firefox in to the body of an outgoing email preferably in Thunderbird, or any email app... so I could just click and all the links and hopefully all the names that I have given to those links will then appear in the body of an outgoing email automatically, ready for me to then write what I want, plug in an address, and send.
    When I did a search of add-ons on the Firefox and Thunderbird sites, I found something called “Open all links 0.3.1” on the Thunderbird site that I think is for the opposite of my description... I think this add-on is to automatically open all the links in an email that is received... '''which IS NOT what I want to do'''... I want to place all the links that I have in a Firefox bookmarks folder in to an outgoing email... the URL to the “Open all links 0.3.1” add-on is below for you to look at just in case I am reading this wrong...
    https://addons.mozilla.org/en-US/thunderbird/addon/2913/
    Otherwise, I could not find any add-on that fits my description.
    Thanks so much,
    numetro

    Hello Firefoxies,
    Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird or any email app? I want to be able to insert all the links from a Firefox bookmarks folder automatically in to an outgoing email and include the names that I have given to those saved links / bookmarks.
    I searched for this add-on on the Firefox and the Thunderbird sites, but I don’t think the one that I found is for what I am thinking of.
    What I would like to do is to be able to add all the links in a saved tabs folder, or any bookmarks folder, from Firefox in to the body of an outgoing email preferably in Thunderbird, or any email app... so I could just click and all the links and hopefully all the names that I have given to those links will then appear in the body of an outgoing email automatically, ready for me to then write what I want, plug in an address, and send.
    When I did a search of add-ons on the Firefox and Thunderbird sites, I found something called “Open all links 0.3.1” on the Thunderbird site that I think is for the opposite of my description... I think this add-on is to automatically open all the links in an email that is received... '''which IS NOT what I want to do'''... I want to place all the links that I have in a Firefox bookmarks folder in to an outgoing email... the URL to the “Open all links 0.3.1” add-on is below for you to look at just in case I am reading this wrong...
    https://addons.mozilla.org/en-US/thunderbird/addon/2913/
    Otherwise, I could not find any add-on that fits my description.
    Thanks so much,
    numetro

  • Go back one page does not work

    Since I had to reinstall Firefox 3.6.15, the "go back one Page" does not work in many cases. Sometimes by clicking on history and manually returning, it works. Id there a fix for this problem, because it is new.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Error message on my HP Photosmart C7280 All-in-One 'Wireless Radio not Working'

    error message on my HP Photosmart C7280 All-in-One  'Wireless Radio not Working' My broadband is BT Infinity with a very strong signal throughout the house and my operating system is Windows XP. My printer will not connect wirelessly to my network, what can I do with respect to the error message 'Wireless Radio not Working'

    Hello @GeoffH777 ,
    Perfect! You are very welcome, I am very happy to hear the reset helped!
    If you  have a quick moment, please scroll back to my last message here and click the "Accepted Solution" button, so others can find our thread if they happen to run into the same issue.
    Greatly appreciated, have a wonderful day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • One headphone does not work or works 50% of the time.  What is best way to resolve?

    one headphone does not work or works 50% of the time.  What is best way to resolve?

    First of all, I'd recomend resetting the iPod. Do this by pressing the 'Menu' and 'Center" buttons for 10 seconds or until the Apple logo appears.
    If this doesn't work, then it sounds like a hardware fault.
    To identify the issue, if you have one, try plugging the iPod into a speaker through the dock. If this works, then the issue is with the headphone jack. If not then the logic board is dead.  If the iPod is less than a year old, then it can be repaired by Apple for free. Just book an appointment for the Genius bar.
    If not then, you could see about sending it to an iPod Repair Company, such as my own. A replacement headphone jack would cost £30.00 in the UK, including next day delivery. Other companies you could try would beUKiPodRepairs, but we guarantee to beat any quote that you get.
    Hope that this helps,
    Mark Sweeney
    Dr Pod Founder

  • HT204065 Group text with one non iPhone not working on iPhone 6 in the group.

    Group text with one non iPhone not working on one iPhone 6 in group. SMS, MMS and iMessage as well as group messaging are all turned on. Has worked intermittently but now cannot see or respond in that particular chain. Can send independently to the non iPhone (Samsung) but not in group. Other iPhone 6 and 5 in group work fine.

    The reason why you have to turn off 3Gs is because T-Mobile does not support iPhones 1700 something or other. You have to turn off the 3Gs on the iPhone to make it work.
    As already provided, it shouldn't matter since the iPhone is designed to automatically connect to the fastest internet connection available. If wi-fi access and 3G network access is on, when in range of an available wi-fi network you have access to and have connected your iPhone with previously, the iPhone will connect to the wi-fi network automatically. When leaving the range of the wi-fi network, the iPhone will connect to the 3G network if 3G network access is available. If 3G network access is not available, the iPhone will connect to EDGE or GPRS - whichever is available at the time.
    If this is unique to T-Mobile's network with the iPhone for some reason since T-Mobile is not an official carrier for the iPhone in the U.S. and you were instructed by T-Mobile to do so, then you need to do so.
    If this is not working now, the problem lies with T-Mobile and I have no idea what to tell them for them to recognize where the problem lies on their end.

  • One speaker is not working since long time

    one speaker is not working since long time bought in last december

    I have iphone 4Gs and I can see at bottom there are 2 nets for speakers and I saw with my college has same iphone and sound is coming from both but mine is coming from only from right side.

  • Firefox not working in area kw1 5bj

    firefox not working in kw1 area of scotland
    == This happened ==
    Every time Firefox opened
    == 11-6-2110

    Is there any solution you can suggest ?
    The following are also not working.
    http://bhashaindia.com/ilit/Bengali.aspx
    http://bhashaindia.com/ilit/Gujarati.aspx
    http://bhashaindia.com/ilit/Kannada.aspx
    http://bhashaindia.com/ilit/Marathi.aspx
    http://bhashaindia.com/ilit/Oriya.aspx
    http://bhashaindia.com/ilit/Punjabi.aspx
    http://bhashaindia.com/ilit/Tamil.aspx
    http://bhashaindia.com/ilit/Telugu.aspx
    Thank you for the support.

  • [S210 Touch] One key recovery not working

    I have a 1.25 year old S210 Ideapad Touch.  I made a 100GB partition with EaseUS and had no problem with onekey recovery.  I tried to merge that empty partition with my C drive using EaseUS software but it did not work saying there were errors.  After that attempt One Key did not work.  Tried to open One Key with compter turned off, error message said damaged partition. Next I used Control panel Administrative Tools: Disk Management to return C drive to almost its original size less 350 mb. one key still did not work.  I reinstalled one key from Lenovo website and still did not work. Still indicated damage partition.  What can I do now?
    Jim
    Moderator comment: New thread created. Subject edited for clarity. Was: Re: One key recovery not working!

    I found the following on a recovery disk which I made early last year for the  same computer but I cant get it to boot.
    How do I boot this usb flash drive without losing this material and is it used to recreate the correct partitions?
    convert gpt
    create partition primary size=1000
    format quick fs=ntfs label="WINRE_DRV"
    assign letter="W"
    gpt attributes=0x8000000000000001
    set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac"
    create partition efi size=260
    format quick fs=fat32 label="SYSTEM_DRV"
    assign letter="S"
    create partition efi size=1000
    format quick fs=fat32 label="LRS_ESP"
    assign letter="I"
    gpt attributes=0x8000000000000001
    set id="bfbfafe7-a34f-448a-9a5b-6213eb736c22"
    create partition msr size=128
    create partition primary size=436224
    format quick fs=ntfs label="Windows8_OS"
    assign letter="T"
    create partition primary
    format quick fs=ntfs label="LENOVO"
    assign letter="O"
    shrink minimum=12288
    create partition primary
    format quick fs=ntfs label="PBR_DRV"
    assign letter="Q"
    gpt attributes=0x8000000000000001
    set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac"
    exit
    Thanks for any help,
    Jim

  • Logging for AS not working

    Hi,
    In sm21, I cannot see any logs from the AS. I can only see the ones from CI.
    Any ideas how to solve this issue ?
    Anything is welcomed,
    Thanks.

    Hello
    This thread was locked for the following reasons:
    1) the topic does not relate to PI. This forum is for PI technical issues only.
    2) it is against forum rules to post the same issue on multiple forums - Re: Logging for AS not working
    Regards
    Moderator

  • Why does Firefox not work here in China anymore, since January of 2015?

    I have used Firefox for years, as the fastest and most reliable browser for me, esp in China... not anymore! Last month (unknown to me) a hijacker called Vosteran took over my Firefox browser. I finally realized it and got it cleaned up using Malwarebytes anti-malware, and downloaded a new Firefox... now SAME problem exists, even with Vosteran removed!
    Firefox will not allow me into ANY normal sites, saying they don't have the proper security code. This includes my Yahoo front page, email account, ESPN and other common sites that are certainly NOT dangerous. So, WHY does Firefox not work anymore? It is useless to me here in China the way it works now.

    hello rickinchina, first please make sure that the '''date, time & timezone''' are set correctly on your system and that firefox is set to directly connect to the internet (that's the "'''no proxy'''" setting in the firefox ''menu ≡ > options > advanced > network > connection - settings...'').
    if this doesn't solve the issue (or it is already set properly), a possible solution depends on different factors:
    * what is the '''error code''' shown under ''technical details'' on the error page?
    in case the error code equals ''sec_error_unknown_issuer'', please attempt to add an exception on the bottom of the error page (but don't do it for real) and inspect the certificate (see the screenshot attached for instructions):
    * which '''issuer information''' does the certificate contain?
    please report back with those two pieces of information. thank you!

  • Skype 6.3 upgrade for Mac not working

    [Topic title updated by moderator to be more descriptive. Original topic title was: "Skype upgrade for Mac not working"]
    BE WARNED - just because you are being asked to upgrade your Skype, it does not mean it will work on your machine. I am a fairly regular user of Skype and this morning was unable to log-in, being told that I needed to upgrade. I did so to 6.3.0.602 but I was unable to log-in once the software had downloaded. After some research on the forums and finally a text chat with Support, I was told that Skype 6.3.0.602 requires a Mac OSX of 10.9 or above - I have 10.5.8
    "So what can I do", I asked the tech support. The answer is nothing (unless I get new OS X software) - there is no Skype software programme that supports my operating system and no timeframe for when it might be available.
    Huh? That's right. It's just not available. So for now, users with less than OS X 10.9 will be unable to use Skype when they are instructed to upgrade. It really doesn't make sense. But just so you know....

    jessicaed wrote:
    BE WARNED - just because you are being asked to upgrade your Skype, it does not mean it will work on your machine. I am a fairly regular user of Skype and this morning was unable to log-in, being told that I needed to upgrade. I did so to 6.3.0.602 but I was unable to log-in once the software had downloaded. After some research on the forums and finally a text chat with Support, I was told that Skype 6.3.0.602 requires a Mac OSX of 10.9 or above - I have 10.5.8
    "So what can I do", I asked the tech support. The answer is nothing (unless I get new OS X software) - there is no Skype software programme that supports my operating system and no timeframe for when it might be available.
    Huh? That's right. It's just not available. So for now, users with less than OS X 10.9 will be unable to use Skype when they are instructed to upgrade. It really doesn't make sense. But just so you know....
    Please look at the top of the community page, and you will find a box "Search:". Write your problem here "Upgrade not working" and see what crops up. Most likely you will be taken somewher like here: http://community.skype.com/t5/Mac/quot-We-ve-signed-you-out-because-your-using-an-outdated-version/m...  
    Here you will read that the latest versions of Skype will not work on some of the versions of MacOS, and that PPC requires one version, Leopard another, Snow leopard another, Mountain Lion another. They are indoctrinated with a stamp in their forehead to enforce their congregation of true believers to install the latest with all "security fixes" or death is looming. They are not used to software that is 2 years old. 
    So, with Mac, we have different operating systems and different sets of libraries - and things may go belly up if you upgrade - a OS feature is done differently, a libary has been placed inside the OS, and is no longer needed - and if you try to use it, you will be trapped.
    Install the latest version that works for your Mac, and make sure to freeze this. Update the "info.plist" file and tell Skype that you use their latest should they pry. As long as it works, do not change anything!
    And make the change to stop Skype from checking every time you start.

  • Save for web not working in Photoshop element 6

    Save for web not working in Photoshop element 6. I am using Mac os x version 10.5.8   Anyone know how to fix that please tell me. Thanks

    I just copy the preferences from my computer for you to see what are shown about adobe
    file:///Users/raymondsmith/Library/Preferences/Adobe/
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Illustrator%20CS2%20Settings/
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Paths
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20CS2%20Settings/
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Paths
    file:///Users/raymondsmith/Library/Preferences/Adobe%20Photoshop%20Elements%206%20Settings /
    file:///Users/raymondsmith/Library/Preferences/AdobeUM/
    file:///Users/raymondsmith/Library/Preferences/AppleWorks/
    file:///Users/raymondsmith/Library/Preferences/ByHost/
    file:///Users/raymondsmith/Library/Preferences/CD%20Info.cidb
    file:///Users/raymondsmith/Library/Preferences/CDDB%20Preferences
    file:///Users/raymondsmith/Library/Preferences/cfx%23FBSxPfw
    file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.90.sh.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Pro7.0.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.acrobat.sh.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Acrobat.Uninstaller.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Adobe%20Help%20Viewer.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.ami.installer.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.bridge2.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.mediabrowser.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.PhotoshopElements.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader_ppc_9.0.plist
    file:///Users/raymondsmith/Library/Preferences/com.adobe.Reader.plist
    file:///Users/raymondsmith/Library/Preferences/com.aol.aim.plist

Maybe you are looking for

  • Windows not showing up in Startup Disk

    Just updated a 15" Retina to 10.8.3 and also ran the SMC 1.1 update. Now my bootcamp windows partition does not show up in the Startup Disk any more. I can see it in the Finder and I can reboot and hold down option key to boot into Windows, but for s

  • Software Inventory - Unknown Install Location

    Hello, Running the SCCM Asset Intelligence report 'Installed Software on a specific computer (Report 02E)' shows a number of software titles with 'Unknown' in the 'Installed Location' column. I have asked the user of a particular device to check a sa

  • OWB 10gR2 and variables

    I am using OWB 10g R2. I want to have a Process Flow (which will eventually run in Oracle Workflow) run a mapping which does a straightforward ETL process from a source table to a target table. If that mapping completes successfully I want to run a s

  • List the base tables of a view

    Hi All, I have a view but I do not have any information about the base tables and the query that was used to set up this view. Is there a way to atleast list the base tables on which the view was created! Thanks in advance! ~

  • Problem with the Sevice Desk VAR to Solution Manager 7.1

    Hello Gurus, I have a problem with the Sevice Desk VAR to Solution Manager 7.1, When I want to send a message to SAP I can't see the text "Send messange to SAP",  in the Actions to Message only I can see "Send Notification to SAP" but I can't see the