1: N Mapping - Error taget not created

Hi Experts,
    I am trying a test senario for this multi mapping. I want to send Emp data from SAPECC(Proxy) to Legacy system. Based on Personnal Area,the message should split in Message1 or Message2 and will be sent to different recevers.
Below is the Source Message type:
Message                    1-1 Occurence
Message1                 1-1 Occurence
   Emp_SAP                1-1 Occurence
     Emp                       0-N Occurence
        EmpID                1-1 Occurence
        EmpFName         1-1 Occurence
        EmpLName          1-1 Occurence
        PersArea              1-1 Occurence
Below is the target message
Message                 1-1 Occurence
   Message1             1-1 Occurence
       Emp_soule        1-1 Occurence
           Emp              0-N Occurence
              EmpID        1-1 Occurence
              EmpName   1-1 Occurence
Message2              1-1 Occurence
       Emp_soule        1-1 Occurence
           Emp              0-N Occurence
              EmpID        1-1 Occurence
              EmpName   1-1 Occurence
        Now I have done the below mapping.
SOURCE    TARGET
Message -> Message
Message1->Message1/Message2
Constant -> EmpSoule
PersArea(with condition/Contex changed to EmpSap) ->Emp
EmpID ->EmpID
EmpFName (Concatenate) EmpLName ->EmpName
In Receiver determination condition i have mentioned the condition for both the receiver.
Error: When I test this mapping in Test tool my message1 ans message2 gets created properlly. when i execute the same message from workbentch then it through exception saying that target Node :/Message cannot be created(i dont remember the exact wordings but this is the meaning). Please tell me how should i rectify this error.
Thanks in Advance.
Regards,
Shweta.

Hi
if u are getting the error message in moni as can not produce the target
then u can do the troubleshooting ion the followin way.
copy the input payload from the sxmb_moni and paste it in the ur message mapping test tab and then test the ampping. it will give the error in the mapping and gives u the description about the field in which error is coming.
This error basically occurs when u r passing the multiple values for a particular field and in the target u have put the occurence as 1..1 then it will give such type of error u have to changt the occurence for that fiekld as 0..unbounded.
if u still face the problem please reply me back.
Thanks
Rinku

Similar Messages

Error: could not create async IO thread [8](-903)

Hello,
we're experiencing problems with the MaxDB backup mechanism(Log and Full-Backup).
It started last week, when we discovered a full log volume,
because the autoLog was deactivated by a failed log backup.
Since then our automatic full_backup script,
wich runs at 00:25 each night, is not able to do a full backup anymore.
The error we found in the backup history was:
Error: could not create async IO thread [8](-903)
In the diagnosis files the error looks like:
2009-02-27 00:25:00      0xE88 ERR 18008 TASKING Could not create thread: 'ASYNCi', rc = 8
2009-02-27 00:25:00      0x584 ERR 52011 SAVE     devspace: surprising blk cnt:
2009-02-27 00:25:00      0x584 ERR 52012 SAVE     error occured, basis_err 3700
2009-02-27 08:58:39      0xE88 ERR 18008 TASKING Could not create thread: 'ASYNCi', rc = 8
2009-02-27 08:58:39      0x930 ERR 52039 AUTOSAVE terminated, because of: 3700
(at 00:25 it's a failed full_backup, at 8:58 a failed autolog backup)
If the autolog was turned off because of this error,
it was not possible to do a manual log-backup (stated the same error as in the logs)
We could "solve" this by restarting the X-server.
After this a manual log-backup was possible and we could turn on
autolog again.
As today, the database was not accessible at all and we had to reboot
the database server. The kerneldumps of these crashes are in the attachment.
Additionally, you find some log files there.
Our environment:
Windows Server 2003 R2 - SP2
4GB Ram
MaxDB 7.5.00.44
Any help to find out, what's going wrong here and to have a stable backup again would be nice.
Dominic
.... how can I upload attachments btw?
Edited by: Transporeon on Mar 2, 2009 4:36 PM

Hi there!
> The error we found in the backup history was:
> Error: could not create async IO thread [8](-903)
>
> In the diagnosis files the error looks like:
> 2009-02-27 00:25:00      0xE88 ERR 18008 TASKING Could not create thread: 'ASYNCi', rc = 8
>
> We could "solve" this by restarting the X-server.
> After this a manual log-backup was possible and we could turn on
> autolog again.
Basically what you're facing is - like Markus correctly assumed - a shortage of Windows system resources.
Check the returncode meaning with the xsysrc tool which is delivered with every MaxDB installation on Windows:
commandline> xsysrc 8
Errortext for errorcode 8:
'Not enough storage is available to process this command.'
This means: Windows cannot process the system call (create a new thread in this case), because of a shortage of internal resources.
Since the resource management of Windows is not really open that much to outside (as in 'outside of the windows kernel development') analysis, very often you cannot do much about this, but reboot.
Since MaxDB is dynamically creating the threads when they are needed for backup (and removing them afterwards), the problem itself may not be solved completely.
Anyhow, there are several steps you can make to make it less likely to happen:
1. Use the /3GB switch for Windows
2. Use the "USE_FIBERS" parameter to have MaxDB use lightweight threads (aka FIBERS).
3. Use the "PREALLOCATE_IOWORKER" parameter to disable the dynamic creation of threads.
MaxDB will then instead create all thread at instance startup - so backups won't fail anymore due to missing resources for new threads.
and as usual: use the current version of MaxDB instead that old 7.5 Build 44.
At least install the current 7.5 patch.
> Our environment:
> Windows Server 2003 R2 - SP2
> 4GB Ram
> MaxDB 7.5.00.44
> .... how can I upload attachments btw?
There is no upload facility in the forums. You still may provide a link to your webspace if you want to provide logfiles.
regards,
Lars

ERROR Could not create DOM from control.xml

Hi All,
I am installaing 4.7EE on Sun Solaris 5.9 SPARC with Oracle and JDK version is 1.4.2_08. When i am running sapinst, sapinst GUI opens and after when i am selecting the Central installtion and i click on Next it giving error message that
WARNING Could not read file control.xml. Please make sure that you called SAPinst with the correct control file (the control file is given to SAPinst as its first command line parameter or as value of the command line property SAPINST_CONTROL_URL)
ERROR Could not create DOM from control.xml
How to solve this error. I have searched in SDN but i am unable to get the solution.
Mahesh C

Hi Kiran,
I have given all permissions to the control file. But these control files are in different places /SAPINST/UNIX/SUNOS_64/PATCOL640/WEBAS630 and ORA, DB2, DB6, IND, INF, ADA in these folders i can c the Control.xml files. But i have given all read write and execute permissions but still its getting the same error. I have downloaded the same IM for 3 times and tried.. But the result is the same.
Is there any other way of work around for this...
Thanks
Mahesh C

Why do I get error 'Could not create temporary file. No space left on device" when I use the Engine Installation Wizard in TestStand?

The process gets to the NIVISA\SETUP.INI step, then I get this error.
I've tried with installing the MDAC and not, and it happens both times.
The drive I'm trying to create the file to has 7.4GB open on it, so I'm not sure why this is happening.
Thank you,
Dave Neumann

Dave,
This is documented in the KnowledBase 2D6A63VW titled: "Error: Could Not Create Temporary File, No Space Left on Device".
As RByrd suggested, you might need to free up some memory space in your System Temp directory, OR you may change the location of your System Temp directory to one with more space (such as the directory where you want the TestStand Engine files to be saved). The Knowledbase shows how to do this step by step. This is its URL:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/46f99e55650d8d5b86256ac00059018e?OpenDocument
Regards,
Carlos Leon

Can you play this url? (JMF error 'could not create player for')

Hello,
I can play this url in Windows Media Player
http://anon.vht.com.edgesuite.net/dl/deg18-062405-2425.wmv
However when I try to play it in JMStudio 2.1.1e, I get error "could not create player for deg18-062405-2425.wmv"
Any help appreciated,
thanks,
Anil

please login and vote for this bug to be fixed - 4 years old!!!
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4670412

ADF Faces: !-- ERROR: could not create stylesheet for oracle-desktop.xss

Hi,
I'm using ADF Faces EA6. Sometimes when I create the EAR, it doesn't include the file "oracle-desktop-ea6-ie-6-windows.css" which muest be present in the "adf/styles/cache" directory. If I check the source code from the browser, it starts like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"><html dir="ltr" lang="es-ES">
<head><title>Sistema de Seguridad</title><meta name="generator" content="Oracle ADF Faces"><script type="text/javascript" src="/fmv/adf/jsLibs/Commonea6.js"></script><script type="text/javascript">_defaultTZ()</script></head>
Please note the comment: 
Does somebody know the reason?
TIA,
Brian

If everything is set up properly the css will get generated if it doesn't exist. You do not have to be running in the IDE for the css to be correctly generated. Running the app first is generating the css before you deploy, so you've taken away the symptom but not solved the problem. If you try running on another browser, for example, you'll probably run into the same problem.
Does your ear get unzipped when you deploy? Do you have a writable file system for the css to get written to? There is a known issue with WebLogic where it doesn't expand the EAR.
Please check to see if there are errors in the logs.

Osdm error 'could not create the Java virtual machine.'

Running on Windows XP. SQL Developer reports Java(TM) Platform=1.5.0_06
I downloaded and unzipped the osdm early adopter release,but when I double click on the osdm.exe, I get a dialog box titled"Java Virtual Machine Launcher" with the error:
could not create the Java virtual machine.
I'm don't know where to begin to troubleshoot this problem.
Is there a log,trace,error file somewhere?
Do I need something specific in my path or an environment variable set?

Thanks Jim, for helping and the support. I'll respond to a few things in this thread for the rest of the forum.
Feedback
Let's start with the feedback and support. As Rene said, he is working at answering all queries coming into the feedback application. This means reviewing the issues, working with the developers and logging bugs. Each comment and query in that application is addressed and users can go back in an review the feedback for their own comments in the application too. We have had considerable interest and downloads, about which we are very excited, and this means there are lots of queries. Rene is addressing all these, and as I type, there are no comments in that application that have not been addressed. Not all are closed, as there are some outstanding issues, but each user who has submitted a comment shold have received at least one email.
The Team
I'm reluctant to comment about which part of the product is built in which country, but will say that SQL Developer has been a small team, with the greater percentage of developers living outside the US from the outset. I love working in the team including the wide diversity of locales and cultures and also think that because we live across multiple time zones, we can help users most times of the day or night. We are very privileged to have had the modeling team join us and I'm sure you'll get to know them in time too. If you are interested, the team stretches across a few states in the US, Ireland, Northern Ireland,England, Belgium, Bulgaria, India and China!
Now to the problem. - Java virtual machine
1. There is a choice of download, either with the JDK or without. If you download the build with the JDK, there should be no problem, as the product knows where to find the jdk. I'm not sure I see which of these 2 downloads was used. So that would be useful information to have.
2. If you use the build without the JDK, then Data Modeling looking for the detail in your path.(Unlike in SQL Developer where we prompt you) You can test to see what is in your path by starting a command line, or command prompt and typing java -version. This will tell you what version of java is being looked for and used by Data Modeling.
If you do not have a JDK, then you can download and install that as described on the download page.
Troubleshooting
We want to release SQL Developer Data Modeling as a standalone tool (i.e. what you are testing today) or underpinned by a repository. So our main goal is to ensure that we have a solid stable and usable product for production. The plan is to follow production with a much tighter integration to the underlying SQL Developer framework.
Regards
Sue

I can't open protools error could not create a new document because assertion in/volume/ development/w.s.Protools_10.1.2/Altura parts/DFW/macBuild/../view/umenu.MacOS.mm.line 1351

I can't open protools error could not create a new document because assertion in/volume/ development/w.s.Protools_10.1.2/Altura parts/DFW/MacBuild/../view/umenu.MacOS.mm.line 1351

I'd search or post here:
http://www.macosxaudio.com/forums/viewforum.php?f=26

Error: Could not create system variants in multiple client system

Hello ,
I am trying to make changes to the variant CUS&_FINAL_AT in se38 , but the error message is coming while saving .
error :Could not create system variants in multiple client system
Could you please help?

Hi Huynh,
Did you ever figure out how to add custom fields to an e-recruit infoset? I need to so same and would love a heads up on how.
Leena

Error: could not create the java virtual mechine

Hi,
I have installed Oracle weblogic server 10.3.5 in my system and when i am trying to install SOA suite 11.1.1.5.0, i am giving path C:\Oracle\Middleware\jdk160_24
in oracle universal Installer then i am getting a pop-up with the error: could not create the java virtual mechine.
can any one solve this problem if i have to install any another software for that.
Thanks in advance.
Regards,
Jai

Hi
Is this 32 bit or 64 bit. If its 64 Bit, first you install 64 Bit JDK and put in PATH. Make sure when you run java -version, it shows this version. Now download weblogic server Generic Installer (.jar extension). Run this command
java -D64 -jar weblogicgenericxxxxx.jar (Sometimes -D64 should be -d64. I had seen this on few machines. So try -D64 or -d64).
Thanks
Ravi Jegga

Debuging mapping - error : Could not find test data for target operators ?

Hello, Please help me.
I use Oracle Warehouse Builder 10gR2.
I created a cube with two dimensions.
I debugged the mappings of these two dimensions then viewed their data after deployment.
I tried to debug the mapping of the cube, and got the error: Could not find test data for all source and target operators.
For source objects exist test data but for the target operator (cube_out) logically we do not need test data !!!! .
But the error is here: Could not find test data for target operators. Why ??
How to configure or explain to owb that the target operator do not have test data ????
I need your help.
thank you in advance.

Sorry, I can not understand your approach ?
I explain you in detail : I work in ROLAP.
I have two dimensions : DIM_1 and DIM_2 linked with the cube (Fact_table).
I have three mappings : MAP_DIM1, MAP_DIM2, MAP_CUBE.
For the MAP_CUBE, I have source operator : VIEW_IN and Target operator : CUBE_OUT.
I could see the data dimensions : DIM_1 and DIM_2 after debugging and Deployment in the OLAP schema.
I tried debugged the mapping: MAP_CUBE so I got the error: Could not find test data for all source and target operators.*
thank you for help.

JMStudio Error "Can not create session manager"

Hi,
I'm trying to transmit an mpg file through a simple pc to pc network, using the transmission wizard in the JMStudio, and everytime it causes a "can not create session manager" error, even when I try to transmit .mp3 file
I'm using an ip like 100.100.0.1 for the sender machine, and 100.100.0.2 for the receiver machine, and I don't know where is the problem
thanks in advance

Um,maybe the port that you use for transmission is already occupied.
Make sure that you are not using JMStudio to transmit streams while trying to receive streams from the same port.

AQ Adapter error: Could not create XML document carrying AQ Headers

I'm having problem with the AQ adapter (ADT) sample that comes with the SOA 10g install.
I am running 10.1.3.4 on XP, using Oracle XE.
I can use the sample sql script to enque and deque. However, when I deploy the sample ADT (BPEL project), I see errors in the opmn log. The BPEL instance is not even created.
I see another post with similar question, Re: Debugging BPEL when using Oracle AQ but no answer.
Any help is greatly appreciated. Thx!
----------------- err log --------------
<2009-07-15 00:04:31,656> <INFO> <collaxa> <ServerManager::loadProcesses> Done loading processes for all domains
<2009-07-15 00:04:32,031> <INFO> <default.collaxa.cube.activation> <AQ Adapter::Inbound> MessageReader_ctor: Initialized MessageReader for queue CUSTOMER_IN_QUEUE, consumer = null)
<2009-07-15 00:12:15,984> <ERROR> <default.collaxa.cube.activation> <AQ Adapter::Inbound> MessageReader_ReadMessage: Could not create XML document carrying AQ Headers: [Ljava.lang.StackTraceElement;@e7af3a
<2009-07-15 00:12:15,984> <ERROR> <default.collaxa.cube.activation> <AQ Adapter::Inbound>
java.lang.Exception: java.lang.NullPointerException
     at oracle.tip.adapter.aq.database.MessageReader.readMessage(MessageReader.java:750)
     at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.run(AQActivationSpecDequeuer.java:261)
     at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
     at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:280)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
     at oracle.oc4j.sql.proxy.StatementBCELProxy.oc4j_releaseToCache(StatementBCELProxy.java:67)
     at oracle.oc4j.sql.proxy.StatementBCELProxy.oc4j_releaseTarget(StatementBCELProxy.java:79)
     at oracle.oc4j.sql.proxy.SQLBCELProxy.oc4j_close(SQLBCELProxy.java:95)
     at oracle.oc4j.sql.proxy.StatementBCELProxy.close(StatementBCELProxy.java:92)
     at oracle.AQ.AQOracleQueue.destroyStmt(AQOracleQueue.java:3099)
     at oracle.AQ.AQOracleQueue.dequeue(AQOracleQueue.java:1793)
     at oracle.AQ.AQOracleQueue.dequeue(AQOracleQueue.java:1307)
     at oracle.tip.adapter.aq.database.MessageReader.readMessage(MessageReader.java:485)
     ... 4 more
<2009-07-15 00:12:16,203> <FATAL> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Uncaught exception oracle.as.j2ee.transaction.tpc.ProtocolErrorWithNotification in JCA-work-instance:AQ Adapter-0 - cause: Branch [oracle.oc4j.sql.xa.EmulatedXAResource@14d9865, Xid( Global Id 34.5f.1e.a8.ff.ff.ff.ff.cd.b9.38.7d.22.01.00.00.7a.02.00.00.00.00.00.00, Format Id 1330790740, Branch Id 7c.e5.55.76.00.00.00.00.00.00.00.00.00.00.00.01), oracle.oc4j.sql.xa.EmulatedXAResource@14d9865, state={PREPARED}, exception error code=] in transaction Global Transaction Xid( Global Id 34.5f.1e.a8.ff.ff.ff.ff.cd.b9.38.7d.22.01.00.00.7a.02.00.00.00.00.00.00, Format Id 1330790740), type=orabpel, state=COMMITTING, time in completion or recovering=0)
....

thanks for the reply. I did look into that post, and couldn't found where to set that option either.
However, my PC was rebooted a few times today (I didn't change anything with BPEL), and I just re-ran the test now, that problem disappeared! It is working fine now.

RFC Sender error could not create function template for...

Hi,
I am trying to send an async RFC to XI. Since I use IN BACKGROUND TASK and COMMIT WORK I got following error in the SM58 of the back end system
Server repository could not create function
template for 'XYZ'
In the XI, I see nothing (no message, no error)
How can I fix this problem?
Thanks
Thomas

Hi Thomas,
You may need to have logical destinatio types for sender RFC. (and in the refernce entry you need to provide the actual destination)
may be some other errors also, Check this link and see if you have followed all the steps.
http://help.sap.com/saphelp_nw04/helpdata/en/25/76cd3bae738826e10000000a11402f/frameset.htm
Hope this fixes your issue.
Regards
Vishnu

Agent Process Throws Error - Could not create the Java virtual machine

We are trying to run a WAN test but the server which hosts required SW is kind of older version
OATS controller version installed is 9.3
Agent version same 9.3 v27628
Java version its showing for 9.3 is - 6.0_24
I got this error message on Agent machine
Your CPU does not support the SSE2 instruction set required to run JRockit.
INFO | jvm 5 | 2011/11/11 10:44:11 | Could not create the Java virtual machine.
ERROR | wrapper | 2011/11/11 10:44:11 | JVM exited while loading the application.
FATAL | wrapper | 2011/11/11 10:44:11 | There were 5 failed launches in a row, each lasting less than 300 seconds. Giving up.
FATAL | wrapper | 2011/11/11 10:44:11 | There may be a configuration problem: please check the logs.
STATUS | wrapper | 2011/11/11 10:44:11 | <-- Wrapper Stopped
The Agent machine details are
Intel Pentium III
1.4Ghz , 2.00GB RAM
Windows server 2003
Can you please tell me if this server is not compatible for running version 9.3.
Or let me know what other problem you see.. I will check the user guide to check compatibility too.
Thanks for looking.

Where do i change the path.. i change it in config file in anget manager folder.
then Agent process started working.. but as we try to test it its still pointing to JRockit thing
can u please tell me where should we set the path.. only in config file or there are env entires too?
Thanks

1: N Mapping - Error taget not created

Similar Messages

Maybe you are looking for