1 Operating Concern for Account Based and Cost Based COPA

Hi,
We are using Operating Concern 3000 for Account Based and Cost based Profitability Analysis. However when i try to extract data from the account based Operating concern it gives me an error in extraction : error 09.
Could it be that we cannot use one operating concern for both types or COPA?
Thanks

Hi
Have you deactivated any of the characteristics used in Account based COPA
Check KEQ3 and you may have activated only for Costing based COPA
S Jayaram
Edited by: S Jayram on Dec 18, 2007 3:24 PM

Similar Messages

  • BW - COPA extraction requirements for account based and costing based

    Our client has a requirements of having both account based and costing based BW extraction from ECC.
    Is it recommended? if yes, how does it effect BW data model?

    Hi Ali Khan,
    Kindly have a look at below link,
    http://sap.seo-gym.com/copa.pdf
    yes it's possible and it will not affect BW.
    Hope this helps.
    Regards,
    Mani

  • Difference between account based and cost based in co-pa

    hi friends,
    what is main deffirencebetween account based and cost based in co-pa. what scenerio we use account based and what scenerio we use cost based.
    Thanking u
    suneel.

    Hi,
    It all depends on the OPerating oncern which you are going to use for the CO-PA implementaion.
    For a account based Operating concern you can define accopund based copa.
    For a Cost Based Operating concdern you will have tp define account based Copa.
    You can create account based Copa on cost based operating concern and vice versa.
    In most of the FI implemntaion is done before BW inplemetation and therefore Operating concerns are already defined by the FI people.
    Thanks
    Message was edited by:
            Ajeet Singh

  • COPA : Accounting Based and Costing Based

    Hello Guru's,
    We are on ECC 6.0 and BI 7.3. Our customer is going to implement Accounting based COPA and Costing based COPA in ECC. We have a requirement to have both the Accounting based and Costing based COPA analysis  available in BI. 
    My questions and concerns:
    If we configure both type of COPA in ECC then Can we create both type of data sources also in ECC  ? one for Accounting based COPA and one for Costing based copa ?  If yes then do we need to have 2 infocubes in BI  or one infocube with mapping of both the data source will work ? ... do please correct me or suggest me.
    Regards,
    Komik Shah

    Hi Sridhar,
    Thanks for your reply, can you explain if we want to stop one of the method, what is the steps that need to be done?
    thanks again!

  • COPA -Acccount based and cost based

    Hi ,
    I want to know from BW Point of veiw ,
    what is the difference betwee costing based Ectractor and account based Extractor .
    Can some body explain me .
    Regards

    Data Source-Accounting Base:
    When we generate CO-PA Data Source select accounting based option.
    Fields KOKRS, BUKRS, KSTAR are compulsory.
    There are no Characteristics available for line Items because accounting based data sources do not contain characteristics.
    There are no value fields or calculated key figures available
    KOKRS and PERIO must be selected as selection fields.
    To Provide Data Source for BW all CO-PA Data Sources must be generated in the Source System.
    Data Sources can be defined at Operating Concern and client level.
    Data Source Contains the following Information
    Name of the Operating Concern
    Client
    Subset of the Characteristics
    Subset of the Value fields
    Time Stamp which data has already been loaded in to BW.
    Cost based:
    Cost based CO-PA is the form of Profitability Analysis that groups costs and Revenues according to value fields and costing based valuation approaches,both of which you can define your self.
    It gaurentees you can access at all times to complete,short-term profitability report.
    In Overhead cost controlling primary postings are made to objects in overhead cost controlling and assigned to relevant cost object. Actual cost of goods manufactured also assigned to cost objects and at the same time performing cost centers are credited
    Hope it will helps you........

  • COPA extractor : account based vs cost based

    Hello
    Can you please give me an example of typical extractor output for account based and cost based models.
    Wha are the difference between different model types?  Please answer with your own words rather then with copy-paste.
    Is it the same principle like account based and key figure based in planning?
    Edited by: Comandante Che Guevara on Jun 1, 2009 10:43 AM

    no answer

  • Accounting 1 and Costing 1 View in Material Master

    Hi SAP Gurus,
    I noticed that we only have "Accounting" and "Costing" views activated in Material Master in our current SAP environment. I don't see "Accounting 1" and "Costing 1" views available. Could someone tell me how to activate these views?
    Thanks,
    Cassandra

    Check this path out for adding views to material type:
    Spro>Logistics-General>Material master>Basic Settings>Material types>Define attributes of material type, then click execute, then double click on material type you want to edit, here on right side you will see user departments, you need to get Accounting and costing view highlighted and click save
    In MM01, you need to extend the view for accounting 1 and costing 1. Enter your material number and click enter, here when you see views, select accounting 1 and costing 1, maintain data in the said views and save the material, your material will be extended to the said views.
    Edited by: Afshad Irani on Apr 22, 2010 10:56 PM

  • Create URL,Telephone number as paramater Account Search and result based on parameter of telephone number ?

    Hi Experts,
    create URL,Telephone number as paramater Account Search and result based on parameter of telephone number ?..
    Previous my thread was locked...Now i want to say thanks to KALYANI L and Richa Dameja,..Now This code i have followed now its working fine..Thanks Great help to Kalyani L..and Richa Dameja.. i have implemented the DO_INIT_CONTEXT.....Now getting result...
    As suggest Kalyani L i have implemented DO_INTI_CONTEXT method,Now its working fine....
    Thanks For support.
    Thanks
    kalpana
    Message was edited by: Andrei Vishnevsky
    Disussion is locked.
    Reason: Re: create URL,Telephone number as paramater Account Search and result based on parameter of telephone number ?

    Hello Kalpana,
    I've already locked your previous discussion and thought that I gave pretty clear warning.
    First of all "do my job" posts are not welcomed on SCN.
    Second point: you're incorrect in choosing SCN space with such questions. Here is a little which is related to IC in your task.
    Third point is that if somebody has an answer to your exact question then he will give you it if he wants. There is no reason to post-post-post messages asking for help or hurry. Your "urgent requirement" is not the reason either.
    Fourth one is: according to The SCN Rules of Engagement you need to do the search before posting. Almost all of your questions regarding this topic has an answer already.
    Locking the discussion again. If you continue to post such questions I will need to report this situation to SAP CRM space editors and global moderators.

  • Our system has detected an unauthorized login attempt to your AppIeID from an IP address location different than one you usually use. In order to protect your account, we will disable your AppleID due to our concern for the safety and integrity of the App

    Our system has detected an unauthorized login attempt to your AppIeID from an IP address location different than one you usually use.
    In order to protect your account, we will disable your AppleID due to our concern for the safety and integrity of the AppIe community.
    In order to confirm that you are the rightful owner of this account, we recommend that you click here: My Apple ID.
    I received this e-mail during the night and wondered if is genuine?

    It's a scam to steal your Apple ID and password.
    Delete it.

  • Cash Flow in BW based on cost based COPA

    Hi,
    We have at presently in ECC6, Cost based copa. Now we have to create Profit and loss, cash flow based on that..So I have few question belonging to same as below
    1. Can we create Cash flow and Profit and loss based on Cost based COPA.
    2. Can we create Cash flow and Profit and loss based on Account based COPA.
    3. How can we report in BI based on cost based copa information, can anybody share their experiences/documents please.

    Please check this document:
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPA/COPA.pdf
    Hope it helps.
    Thanks
    Mona

  • BAPI KPF6 POST PLAN COST FOR INTERNAL ORDER AND COST ELEMENT

    Hi all gurus,
    I would like to use in a custom report a BAPI/Function Module that help me to simulate KPF6 in order to post planning costs for internal order and cost element (layout 1-401).
    So the input should be:
    1) Version
    2) period from
    3) periodo to
    4) year
    5) internal order n.
    6) cost element n.
    7) value
    I found a lot of BAPI but don't know the correct one and how to use it (example how to fill the input value).
    Can anyone help me on that?
    Kind Regards

    In additio  to the previous I found the BAPI_COSTACTPLN_POSTPRIMCOST but don't know if it's the correct one and how to use it (some example fitting the my case will be very appreciated).
    If the quoted BAPI is correct.
    I tested it filling all fields as following:
    HEADERINFO:
    CO_AREA=FFCA
    FISC_YEAR=2008
    PERIOD_FROM=001
    PERIOD_TO=012
    DOC_HDR_TX='blank'
    INDEXSTRUCTURE:
    OBJECT_INDEX=000001
    VALUE_INDEX=000004 (hope this point at Interna Order)
    ATTRIB_INDEX=000000
    COOBJECT:
    OBJECT_INDEX=000001
    ORDERID=ZO53-08IMZ
    TOTVALUE:
    VALUE_INDEX=000004
    COST_ELEM=3224048
    FIX_VALUE= 200,0000
    DIST_KEY_FIX_VAL=2
    The Return table is set to 0. Nothing happens.....I suspect something related to indexstructure or index is wrong..
    Could anyone help me on that?
    Kind Regards

  • Account Based Vs Cost Based COPA - Char Derivation

    We're trying to implement both Cost based and Account based COPA at a client here.
    I have some derivation rules maintained in KEDR.
    When I'm trying to post a document in FI, the cost based COPA document is being created with the Characteristics populated correctly according to the derivation rules. However, in Account based COPA the characteristics are NOT getting derived.
    Can some tell me if there could be something I've missed?
    Thanks

    Hi
    Have you deactivated any of the characteristics used in Account based COPA
    Check KEQ3 and you may have activated only for Costing based COPA
    S Jayaram
    Edited by: S Jayram on Dec 18, 2007 3:24 PM

  • Operating concern for two company code with different currency

    Hi,
    We are merging two company code into one SAP server.
    We decide to use on chart of account, and to use one operating concern.
    For company code A: the currency is CNY, for company code B: the currency is TWD.  The operating concern currency is:CNY.
    So i need to in KEA0(maintain operating concern) active company code currency, right?
    So every posting in company code B will be posted in TWD and CNY to COPA same item, right?
    In KE30 report, where to add characters: Currency type that i can show company code B report in TWD?
    Thanks.

    Dear David,
    Yes. If you have different compancy codes within one controlling area, you have to maintain currency type with 10-Company code currecny and while maintaining the operating concern also you have to choose the company code currency only.  Then only you will get the reports with respect of your company code currecny level. This will be basing on your company code-sales organisation, plants and other charcters assignment basis in your configuration.
    All the best,
    Dharma Rao. Yekula.

  • The difference between 'Pigment Based' and 'Dye Based' color inks?

    What is the difference between 'Pigment Based' color inks (as used in the HP OfficeJet 8500 series) and 'Dye Based' color inks (as used in the HP OfficeJet 7500 printer)?
    Thanks;
    Mark S

    Pigment based inks have small color particles suspended in a carrier (like paint).  Dye based inks have colorant disolved in the carrier (like water colors).  Pigment based inks generally have better lightfastness, dye based inks are generally better for photo quality on glossy media.  The following Google search has many pages with useful information.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • PO with account category and cost center as mandatory fields.

    Hi everyone.
    Pls. I need help with the next proces.
    I have to customize a PO with Account Category as mandatory and the PO always must have the same G/L account and Cost Center.
    Thanks for your help.
    Regards.

    Hi..
    Maintain Default Cost Centers for the Cost Elements in OKB9 transaction..Please check with your Controlling Consultant for this...
    And  SPRO > MM > Purchasing > Account Assignment > Maintain Account Assignment Categories > For Account Assignment Category (For e.g. "K" - Cost Center), in detailed screen, "Derive acct. assgt." should be active
    Cheers
    Ravi.

Maybe you are looking for