1  OSX Lion Mission Control vs Snow Leopard Expose can't we combine the two (by leaving older Expose options inside) and get Apple back to leaping forward again?

So I am a web/software developer and I am having major beef with OSX Lion's Mission Control.  While I think Mission Control and Application Windows are interesting additions to the multi-tasking nature and scheme of the OS, removing the older Expose Spaces and All Windows is a huge mistake.  Couldn't Apple have just left all of the old stuff in? Then the system would be complete.  As pretty as Mission Control and Application Windows is, the older Snow Leopard Spaces and Expose moved much faster and tamed all of my apps in a very efficient way.
Here is why Mission Control is not as fast as Spaces and Expose:....
1. With Spaces all of the desktops and their connected monitors were consolidated to one monitor in which you can easily see everything going on from a birds eye view.  You cloud easily drag open windows between them freely and even swap spaces.  This was huge because you could see everything.  You could even activate All Windows over Spaces and see everything..Mission Control will group everything but you can't move programs across desktops unless it's the main desktop to the little desktop.  Nor can you move windows across monitors.  This is frustrating.  Also the desktop are split to their respective monitor so I no longer have a birds-eye key-map access.
2. All Windows is so necessary and slick. Mission Control or Application Windows can't quite keep up.  If I have a cluttered desktop and hit all windows, I can get any window at any time no matter how buried it is.  Application Windows is useful but only applies to the focused application…but what if it's buried?  I have to activate mission control first, select one of the windows from the program group, then activate Application Windows to get to that window.  Also if there are many windows open for an application, Mission Control cannot replace All Windows because they stack and you can't quite tell which of the windows you want is accessible in that stack.
The bottom line is, put both of them together!  Keep the old functionality as an option, because truth be told, the old way of doing things is still considerably faster under heavy work loads.  I would use the Snow Leopard expose features more often.  There is still room for Application Windows and Mission Control, but even after re-training myself I feel I'm moving at 70% of the multitasking speed that I used to move at before using Snow Leopard Expose.  I mean this legitimately, I develop using multiple OS's along with video chat and instead of being a leap forward, Lion is a step backward and that just isn't like apple, everything Apple has done has been leaps and bounds forward.  Let's leap forward and not only have all the sweet new features that Lion offers, but combine with the productive features that really moved and maybe just integrate into Lion's style.  Bottle that and you have something sweeter than Yoohoo.

I completely agree with airbnboy. I used to be able to quick organised different windows within the same app to different spaces (now "desktops" for no apparent reason). This worked very smoothly in expose/spaces. I'd use one gesture to get to spaces, then another for expose, and I'd have all my windows in all spaces visible.
Now, I can't even see all of my windows in specific to one desktop! The best I can do is double scroll to see *some parts* of the windows on a desktop. So now, selecting a window for a specifc app is huge pain.
Worse than this, on moving windows from a desktop to another in, Mission Control will change the ordering of the stacks (per app, not the windows in the stacks). Umm, what is the possible benefit there?
So, now there is no use of spatial memory - e.g. Window X for App Y was in the top left of all my windows in the top left space, and I want to move it now. It's no longer possible to see all app windows in a specific "desktop", and much more effort is required to move windows around.
Great, well done Apple. Can we please, please have Expose and Spaces back as an option? Or at the very least, some way to view all windows for a specifc app on a specific desktop - and by "view", I mean see the whole window, not just a tiny indicator of the window, or a slightly expanded stack that may not give enough context.
The only reason I "upgraded" to Lion was to get XCode 4.2.

Similar Messages

  • After upgrading to Snow Leopard, I can not log into the computer. What Can I do?

    after upgrading to Snow Leopard, I can not log into the computer. What Can I do?

    SqueezeAce wrote:
    after upgrading to Snow Leopard, I can not log into the computer. What Can I do?
    Stick the 10.6 disk into the machine and reboot holding the option/alt key down on a wired/built in keyboard.
    On the second screen, under the Utilities menu is a Password Reset, use it.
    Step by Step to fix your Mac
    What this will do is reset the password and the user account permissions in the process.
    You might have problems with Keychain afterwards, to fix that.
    https://support.apple.com/kb/HT1631  https://support.apple.com/kb/TS1544
    If your still having trouble, look through these User Tips
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

  • I have a mac book with snow leopard. Can I upgrade to the lion os

    I have a mac book ( couple years old) and would like to know if I am able to install the lion OS from the app store?

    We would need more details regarding your MacBook. But it has to be minimum Core2Duo processor and 2GB of RAM. If you go to the Apple Menu select About this Mac for the info.

  • I upgraded my Mac from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2.  I did have Microsoft Office for Mac 2004 in my applications and now get a message "can't open Office because Power PC applications are no longer supported."

    I just upgraded my MAC from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2.  When I try to access my Microsoft Office for MAC (2004 edition) files I am getting a message "can't open Office because Power PC applications are no longer supported.  How can I access all of my save Word documents?  I just want to be able to retrieve all of my documents that were in Microsoft Office for Mac (2004).  If I purchase the newest version of MS office for Mac from Apple will I be able to retrieve my old documents?

    Use any number of free alternatives to your nearly decade old version of MS Office.
    Consider
    LibreOffice (donation-supported)
    NeoOffice (free)
    OpenOffice (free)
    In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft.

  • Upgrade from OSX 10.4.11 to Snow Leopard/OS X Lion

    I know my operating system is really behind.  Now that OSX lion is out I am very behind in terms of my operating system. Do I need to buy snow leopard first and then lion.  If so can I just buy the leopard upgrade or do I need to buy the box set also?  Thanks for the help I am really clueless about this stuff!

    If your computer meets the requirements you could upgrade to Snow Leopard or Lion, but upgrading to Lion requires that Snow Leopard 10.6.6 or later first be installed. You can purchase a Snow Leopard DVD at your local Apple retailer or online for $29 USD.
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current Tiger Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger and later.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).
    Snow Leopard General requirements
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible Internet service provider; fees may apply.
    Some features require Apple’s MobileMe service; fees and terms apply.
    Lion System Requirements
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Some features require an Apple ID; terms apply.

  • My Mac is a OSX 10.5.8 and i want to upgrade to Lion v10.7.2  Do I have to also get Snow Leopard?  Can the be purchased together?

    My Mac is a OSX 10.5.8 and i want to upgrade to Lion v10.7.2  Do I have to also get Snow Leopard?  Can the be purchased together?

    Yes you have to purchase Snow Leopard first. Once you have it installed then update it to 10.6.8 using the 10.6.8 Update Combo. Once you have updated and thorougly tested your system then purchase the Lion upgrade from the Mac App Store and follow the on-screen prompts.
    At the very minimum make sure your computer meets the System Requirements for Lion and make sure you have all your applications up-to-date. As you may (or may not) know PPC based apps will NOT run under Lion so please check your apps to see that they will run under Lion. Please look at the article link below for instructions on how to tell if they will or not.
    http://osxdaily.com/2011/07/15/how-to-check-if-applications-are-incompatible-wit h-mac-os-x-lion/

  • How can I upgrade from an older OSX to Lion, I do have the requisite processor.  I did not have Snow Leopard, so I do not have the App Store.

    The people at the Apple Store told me to wait on an upgrade to Snow Leopard because Lion was coming out soon.   However, without Snow Leopard, I can not get the App Store.
    I have OSX 10.58 and a processor big enough to support Lion.

    So you need to upgrade to Snow Leoapard first so you can access the Mac App Store in order to download Lion.
    Snow Leoapard is available from the online store >  http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
    Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM.

  • I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!

    I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!

    Don't be afraid to bump this topic. There's also an App Store forum where you might repost this question, but give some of these details in your post.  I'd rephrase the topic to something like "Can't use App Store to upgrade." (Instead of can't "open".) Then give the details.
    https://discussions.apple.com/community/mac_app_store/using_mac_apple_store

  • I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk?

    I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk? It is the start up disk and I can't figure out how to get it out of the computer so I can put my lion boot disk in. Thanks

    turn the mac all the way off. turn the mac on by pressing the power button. as soon as the apple logo appears, pres and hold your mouse button(trackpad mouse clicker etc...) until the CD comes out.

  • How do i set up a new lion imac from a snow leopard imac using time machine?

    How do i set up a new lion imac from a snow leopard imac using time machine?

    Connect the two via Firewire cable - Transferring files between two computers using FireWire. Boot the old iMac into Target Disk Mode. Boot the new iMac normally.
    If you are starting the new iMac for the first time then do the above before you turn on the new iMac. After you turn on the new iMac you will begin in the Setup Assistant. When you complete the registration screens you will be offered an opportunity to migrate your data from another Mac. Follow the instructions to migrate your old Home folder, third-party applications and support files, and system preferences to the new iMac.
    If you have already gone through the Setup Assistant and created an initial admin user account, then you do the connection step but will use Migration Assistant in the Utilities folder of the new iMac.

  • Can I update from osx 10.4.11 to snow leopard?

    I have a mac book pro with OSX 10.4.11 and would like to upgrade it to OSX Snow Leopard.  Can I simply proceed or is there an in between update necessary?  Thanks.
    Mbota2

    Purchase a Snow Leopard DVD with which you can upgrade your current system.  Before upgrading do the following:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If all is OK then continue with the installation of Snow Leopard.

  • Upgraded both computers in the household and found Lion is too disruptive to workflow.  Do I turn in the new laptop for a pre-Lion rebuild to keep Snow Leopard, or do I return computer and get upgraded memory to improve performance of existing MacBookPro?

    Upgraded both computers in the household and found Lion is too disruptive to workflow. 
    Do I turn in the new laptop for a pre-Lion rebuild to keep Snow Leopard, or do I return new computer and get upgraded memory to improve performance of existing MacBookPro?  I'm mostly still happy with existing MacBookPro, but Aperture doesn't work, the computer can't handle it.
    Other possibility is setting up virtual machine with Snow Leopard server software on new computer.
    Any opinions on what would allow moving forward with the least hassle and best workflow continuity?

    hi,
    what year and specs does the MBP have

  • Worth upgrading to Mountain Lion or stick with Snow Leopard?

    A few weeks ago some of you helped me navigate the pros/cons of buying a spanking new Imac vs a mid 2011 (I decided the 2011 was plenty worthy).   I thank you for that, and now I want to ask: if I were to get a mid 2011 Imac, is it worth to upgrade to the latest OS, or is sticking with Snow Leopard (my current OS) fine?
    I'm using some older software like FCP 6 and its associated suite of programs, and probably plenty of other applications I'm not thinking of at the moment, that I got back in '08 or so when I got the Imac I have now.   I think I've heard that Lion/Mountain is a total overhaul of the OS compared to Snow Leopard, and that makes me wonder if there are compatibility issues/problems associated with trying to use these older pieces of software with the new OS.  What are the super amazing benefits of Lion or Mountain Lion vs Snow Leopard?  Are they worth it?  Do the aforementioned issues exist? Thanks.

    Someone else will need to answer your Time Machine question because I do not use it. It may work because it should port over all the applications, settings, etc. I was going on the assumption that you would be reinstalling your apps from scratch (I guess I thought that because that is what I did - I wanted as clean an install as possible). Anyway, TM should just transfer things - just remember, if any of those transferred apps have PPC installers and you get rid of your Snow Leopard machine, you'll never be able to reinstall them.
    You might want to check these links (and by doing a search here on the forums, there'll be more):
    https://discussions.apple.com/message/18179294#18179294
    https://discussions.apple.com/message/16964725#16964725
    https://discussions.apple.com/message/17434537#17434537

  • I am running a Mac OSX Snow Leopard. Joined Creative Cloud for the year and now it won't allow me to

    I am running a Mac OSX Snow Leopard. Joined Creative Cloud for the year and now it won't allow me to install the app due to administrator rights. Does anyone know how to fix this ?  I have done all the necessary logging already.

    Duplicate post http://forums.adobe.com/thread/1382476

  • I've got macbook pro w/OSXv10.6.8 and intel core 2 duo...how do i know if i have leopard or snow leopard?  i'm interested in the new lion

    I've got macbook pro w/OSXv10.6.8 and intel core 2 duo...how do i know if i have leopard or snow leopard?  i'm interested in the new lion

    tiger was 10.4
    leopard was 10.5
    snow leopard was 10.6
    and LION 10.7!!! LOL
    so you have 10.6   which is snow leopard
    you should be ready to update assuming you meet the other requirements.

Maybe you are looking for