1 photo, 2 different albums, 2 different names

I have some photos that I want to save in 1 folder with one name (for example; Album "January 2013" photo "B1-dogs sleeping") and then in a different folder with a different name (example; Album "dogs" photo "dogs sleeping"), is this possible? When I try to rename the photo in 1 album it automatically renames it in the other album and I don't want it to do that. Hopefully I explained what I wanted well enough that someone can help me.

If you want the photo with different names in different albums, you have to create a second version of the photo and then use different versions in your two albums. Albums do not actually store the photos, they just reference the version of the photo in the event. If you change the name of a version in one album, it will change the version in the event and all albums update to the new name.
To create a new version of your photo use the command "Duplicate" from the "Photos" menu. That will not actually duplicate the original image file, but just create a new edited version.
Regards
Léonie

Similar Messages

  • Saving png photos with different names..

    Hello guys,
    I am not not so familiar with Labview so i would like some help. I have a Vi which is actually controlling 32 RBG lights.We use DMX protocol..everytime one led is on then we take a picture and then the led goes off..Then the second goes on end so on..we have 8leds in 4corners..So we have corner1_led1,corner1_led2 untill corner4_led8 .So in the end we have 32 png photos saved.What i want is to save the photos with different names and the numbers to start from 1 instead of 0.. For example if we select white light and  save the images as "new" the images are going to be named "new_white_0_0" instead of "new_white_1_1" . Do you have any idea how i can change it?
    Attached current photos names and Vi. 
    Any comment would be helpful.
    Thank you.
    Solved!
    Go to Solution.
    Attachments:
    14_07_21_WMS_RGB LED panel.vi ‏162 KB
    names.png ‏127 KB

    The indexing terminal (the [ i ] in the for loop) starts at 0. When creating your filename, use the "increment" primitive from the numeric palette. Then your file names will start at 1 instead of 0.
    I noticed from your VI that you do a lot of string concatenation to build the file name/path, you can use the format into string and build path VIs to make the block diagram look a little simpler. You could also update the deprecated functions (e.g. the open file) with the modern equivalents.
    Certified LabVIEW Architect, Certified TestStand Developer
    NI Days (and A&DF): 2010, 2011, 2013, 2014
    NI Week: 2012, 2014
    Knowledgeable in all things Giant Tetris and WebSockets

  • I just burned photos from different albums to CD-R. When I checked on the photos I burned on the CD-R afterwards,  I noticed that the titles of each folder that these photos are extracted from appear. How can I get rid of these titles???

    I just burned photos from different albums to CD-R. When I checked on the photos I burned on the CD-R afterwards,  I noticed that the titles of each folder that these photos are extracted from appear. How can I get rid of these titles???

    iPhoto 9.6 cannot open iPhoto Libraries on CD/DVD. The iPhoto Library needs to be on a writable storage.  Copy the iPhoto library from the disk to a folder in your Pictures folder. And then run the iPhoto Library Upgrader on that copy, see this link:  iPhoto '11: About the Library Upgrader

  • I have organised my photos in an album but when I open a new book to start putting the photos in, they come up in the book in a completely different order?

    I have organised my photos in an album but when I open a new book to start putting the photos in, the photos come up in the book in a completely different order?

    Yes - in the book they are sorted by date
    Suggest a change to Apple - iPhoto meniu ==> provide iPhoto feedback
    You can start the book with one photo and then add others by dragging them to the book project in the source pane on the left
    LN

  • How to Get Albums in File-Name-Order Photo

    When I updated my iPod Touch to V4.0 and iTunes (V9 on Windows XP) re-synced it, I found that my photo albums were now in Picture Date order rather than PC file name order. I tried several things that didn't work.
    What worked was using the Photoshop Essentials Organizer to change the picture date on all the photos in an album to the same date and time (this can be done to all selected photos in one operation).
    I did the sync in two steps. First I moved the album out of the iTunes photos directory and then synced my iPod which deleted the album. Then I moved it back and re-synced.
    Does anyone know of an easier trick? I’ve already submitted a feedback item to Apple that they should make file-name-order an option in iTunes
    Andy…

    The trick that I used is to append the URL with the name of the file. So if your url is "http://domain.com/attach", use "http://domain.com/attach/filename.doc". IE and Netscape parse the URL to determine what the filename is, so by placing this text at the end, you essentially let the browsers know what the filename is. :)
    I have design a program to get the attach file from an
    attachment. But when I click the link to save the
    file, the default name of the file is 'attach'
    whenever I get different files. Who know what is the
    problem, please tell me the truth.
    Here are some codes of the program.<< snip >>

  • Help!  Can't figure out how to store the same photo in different events

    I know that this is just a user error problem, but I can't figure out how to store multiple versions of the same photo in different events. For example, I use Aperture as my main photo library, so I have a big folder set-up by year and then by events within those years to organize and maintain my library. I'm currently working on a project where I would like to pull out certain pictures for other uses. I tried creating new events and then moving the pictures to those events (like I would have in iPhoto) expecting for a new version of the picture to be deposited in the new event. That didn't work - it moved the picture out of my "main library" folder and as far as I can see it now only exists in the new event. Next, I tried creating "new versions" of the pictures I wanted to move and then just selecting those and moving them. In one folder I selected three photos, clicked "New Versions", then in the browser display I could see two of each picture (for a total of six), I selected ONE of each photo and moved those three to the new event. At which point all six disappear from the "main library" and end up in my new event. I don't understand why that happens. Currently the only way I've been able to do what I need to do is by using the flag field, but as far as I can tell there is only one of those - it's on or off that is really not serving my purpose. What do I need to do???

    Like Jim said, you most likely want Albums for what you describe. Albums simply consist of "pointers" to a single compilation of image data. Albums can be created and deleted at will, because they are just pointers; an important concept.
    Also learn to use Keywords - and unlearn "folder" organization, which is not the way digital asset management works. The power of Albums and Keywords is huge once we lose the film-think of folders organization.
    HTH
    -Allen Wicks

  • I want to transfer my photos from the PC (windows explorer) to my Ipad. The problem is that a keep my photos i different categories and they are in one large folder and subfolders (2 or 3 levels of subfolders).When I sent it to the Ipad, it just respect t

    I want to transfer my photos from the PC (windows explorer) to my Ipad. The problem is that a keep my photos in different categories and they are in one large folder and several subfolders (2 or 3 levels of subfolders).When I sent it to the Ipad, it just respect the first level of folder. After the first subfolder, all the photos are mixed. Any idea how to keep my original organization just transferring from PC to the Ipad (folder having a subfolder also having another subfolder)?
    Thanks
    Diogo

    The Photos app doesn't currently support subfolders, it only has the one level of folder/album. You will either need to change your folder structure on your computer to be just one level, see if there is a third-party photo app in the store that copes with subfolders, or just make do. You can try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

  • I see the same photos with different resolutions in my iPhoto library

    I am trying to organize my photos in the iPhoto library by deleting those are stored twice or more. However in many doubles I found out that some of them exist in my library in different resolutions. My photos are imported either from my camera, or from my iphone, or from my iPad or from the shared photo streams which include photos imported from various apple devices.
    What I see for example is some photos taken from an iPhone exist in both 2048x1536 and in 3264x2448 resolution and some others in 1224x1632 and in 1536x2048 (I guess these 2 resolytions are for the vertically taken thotos while the other 2 for orizontical).  For iPad photos I see 2056x1536 and 2592x1936 for the same photos. All doubles have different names (eg. IMG_007 and IMG_1056 for the same photo). Furthermore some doubles include info about the camera (eg. iPad back camer 4.28mm f/2.4) and some others don´t (only info about the device eg. iPad).
    Why is this mess happening in my library? Apparently I want to keep in my library the photos only in the maximum available resolution for better quality.
    In relation to that I have the following questions:
    1. When a photo or a video is shared in a photo stream, is its resolution decreased to a lower one?
    2. Is there any way to see what the resolution is of the original photo stored in the iPhone or iPad, so that I can compare with the the same ones I have on my computer´s iPhoto library?
    3. Is there any way to see the resolution and other info for the Photos in a shared Photo stream which are not yet imported localy on my computer?
    Thanks in advance.

    Happy New Year to all!
    I made a test and I confirm what I was suspected at first place.
    I uploaded a photo taken from my iPhone to the shared photo stream. Then I imported this photo from the photo stream to my iPhoto library on my Mac. The resolution in which this photo is stored locally is 2048x1536 and its size 961 KB.
    Then I sent the same photo from my iPhone via e-mail. I opened the email on my computer and downloaded the photo. Then I imported it to my Mac´s  iPhoto library. I checked the info out and the resolution is now 3264x2448 and size 2.2 MB.
    Therefore the quality and resolution of the photos that are uploaded to the icloud photo stream is NOT the same as the original one.
    I don´t know whether there is somewhre an option to change that, but this is what happens to me right now.

  • How to sort video, music,photos in different dire...

    hello my friends,
    how correctly to sort videos, mp3, photos in different directories?
    for example if i take a picture in appears in gallery --> image@videos, all music clips there as well..but it should be in gallery--> sound clips.
    all other videos should be in tools --> file manager-->my videos am i right ?
    i dont know how to sort it please any advises?
    at the moment i have family videos, music videos, family photos and everything i found in gallery-->image@videos is it right ?
    Nokia N95 v.20.0.15 + 2 Gb microS + RotateMe beta7 + Nokmote beta1+ ShutUp beta1

    unfortunately you can't separate any videos (u add to ur phone by not using nokia video manager) and images in the gallery. the best u can do is create albums in the gallery.
    In the video centre u can seperate the videos in 'my videos' by creating new folders. i didn't clearly understand ur question so i hope this helps
    can't wait for n97 successor

  • How can i give 2 different names for the same attribute in querypannelVC

    Hi
    I have a View criteria and exposing as a query panel.In the VC, we are using one VO attribute instance twice"FullName".We have a requirement of display 2 different names for this attribute in the query panel Ui.Attached the VC screenshot.
    Ex:Present in the Query panel Ui fields are displaying like
    FullName
    FullName
    Requirement:
    Owner
    Assignee
    Thanks in Advance,
    Naga

    Hi Thanks for the reply..So are you saying like add the same "FullName" attribute twice with different Alias Names(Owner,Assignee) ?But here we are having the FullName as common and depends upon role we are displaying "Owner" or "Assignee".If i create two instances for same attribute will it not be like redundancy ?

  • Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.

    Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to. 
    I'm NOT in any way a Terminal Services expert and I need help trying to get an application program working in a multi-user environment.
    The issue is that the printer changes for every user that is logged in. The application needs to print NOT to the default printer, but to a "special" printer which is selected in the application... let's call it a label printer to simplify the explanation.
    You have your default regular printer, easy for the application to find that one, and then you have a special printer that labels get printed onto. The application needs to know what printer is the label printer. So we allow the user to select that in the
    application and the selection is stored in a config file in 
    C:\ProgramData\mfgr\prog\setting files
    I don't have access to the application so I can't change how this works.  
    In the "regular" world, selecting the label printer driver to use should be per machine, NOT per user. When a new user logs into a machine, the physical printer doesn't go "poof" and a new printer suddenly appear. Same printer for all
    users.
    Yet in terminal services, the physical machine is "merged" with the virtual machine on the server. And there can be many users logged in at the same time. So each users real machine (and real printer) is injected into the "fake" terminal
    services machine. The name of the printers is made unique for each user. So the printers DO go "poof" and change names depending on the user logged into terminal services.
    So user "A" logs in and sets up the application to print to "LabelPrinterForUserA" (or whatever the name of the printer happens to be), that setting is stored in the ProgramData subfolder, and all is well. Later, user "B" logs
    in, and when they print, the application tries to print to "LabelPrinterForUserA" which doesn't exist for user B or is only accessible by user A. If user B re-configures, that breaks it for user A. 
    SOLUTION 1: The way that /should/ work (in my mind) is that you define one "generic" printer in Terminal Services... call it "Virtual Label printer" and when the user wants to print to it, the print job gets re-directed back to whatever
    physical printer is actually connected to their local workstation. There is a map of virtual printer to actual printer depending on the current user. The application is told once to print to "Virtual Label Printer" for all users.
    SOLUTION 2: Or... there should be some way to make the ProgramData sub folders separate per user. E.g. when user "A" tries to access:
    C:\ProgramData\mfgr\prog\setting files
    they actually get 
    C:\UserData\UserA\AppData\mfgr\prog\setting files
    and user "B" gets
    C:\UserData\UserB\AppData\mfgr\prog\setting files
    So the question I have is: Does either of those solutions exist hidden somewhere in the setup of terminal server? Or is there another way around this issue that I don't know?

    I don't really have a "for sure" answer to this, but because people here can't seem to deal with a question that hasn't been answered I'll provide the best answer I did receive from ServerFault.com user Nathan:
    I can feel your pain with using old software on terminal servers ...the solution I've come up with definitely won't scale as it requires some manual configuration, but I've gotten this method to work with our label printers (which require to be
    printed to an LPT port...yep, that old).
    Share your USB-connected printers to the network on each machine. Then, have the user log in on aunique session for each of them
    (a TS account cannot be shared among computers for this to work) and install a network printer pointing to the USB one they shared. Try to use a DNS name to account for possible DHCP movements.
    After, it should work. Each user can do this since display names can be identical as long as the ports are different (which they are).
    This was clarified by the following series of comments:
    I think you are on to something here, and I originally advised the admin to do this. The problem he ran into is that it setup the printer names in the TS as "printer on usersworkstation"
    and he could not rename it except to change the "printer" to whatever. E.g. the "on userworkstation" remained. I believe there is another way of installing the printer which avoids this, but I can't find it. Ages ago, one used to do NET
    USE LPT2 \\computer\printer password /USER:domain\user /PERSISTENT:YES and then tell the driver to print to LPT2 –  James
    Newton Mar
    17 at 16:21   
    @JamesNewton That's actually the exact method we used. The way around the "network printer" part is to install it as local printer and map it to a TCP/IP port that way. –  Nathan
    C Mar
    17 at 16:28
    You mean in the case where the printers are TCP/IP connected and not local USB / LPT to the users workstation? That makes sense. Wonder if this will work for USB connected printers... –  James
    NewtonMar
    17 at 16:35   
    @JamesNewton You'd share the local printer on the client's PC then on the server connect via TCP/IP to it. You'd need static addresses or use DNS names if DHCP, though. –  Nathan
    C Mar
    17 at 16:51
    Ah. Yes. I see. Looks like the LPT thing should work even with a USB connected printer:superuser.com/questions/182655/… –  James
    Newton Mar
    17 at 17:09   

  • How to keep same database with two different names in SharePoint 2013 for two different applications

    Hi All,
    I have very strange situation.
    I had SP2010 production database(wss_content_contoso) migrated to SP13 few months back to migrate one site collection only while I have 15 site collections stored in this database and created a site contoso.com
    Now, I want to migrate same(wss_content_contoso) SP2010 database to SP13 and want to create contoso2.com.
    I changed database name from wss_content_contoso to wss_content_contoso2 and assigned newID during mount process.
    After this exercise, I don't see any site for contoso2.com and issue seems to be the same database. 
    My question is!!!!
    How I can keep both databases(actually same database with different names) and run both application simultaneously?
    Any help appreciated!!
    Thank you,
    AM
    AM Senior SharePoint Consultant

    You need to run Backup-SPSite/Restore-SPSite on each Site Collection you want to 'duplicate'. You cannot restore the same Content Database to the same farm as the Site Collections have the same GUID, which is stored globally for the farm.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How do I set up my second ipad with a different name?

    My second iPad keeps automatically starting up with my previous iPad's name. I don't want that to happen. I want to set this one up with a different name. How do I do that?

    Settings>General>About>Name. You can type any name that you like in there.

  • HT1364 I can't get my playlist items into my new ipod itunes.  I have an itunes account on my pc with a different name.  Help

    I can't get my playlist from my pc itunes account which has a different name to copy onto my new ipod touch.

    Try:
    - Resetting the iPod. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next try placing the iPod in Recovery Mode and then restoring via iTunes.
    iTunes: Backing up, updating, and restoring iOS software

  • Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage  to my Ipad with different name but with  software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

    Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage  to my Ipad with different name but with  software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

    I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
    Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Manage your Apple ID and see if that does the trick
    Hope that helps

Maybe you are looking for