1 powerbook 1 network 2 os's 2 different results

So just for giggles I decided to redo the 12" PowerBook from scratch...wax the drive and dual boot 10.4.11 and 10.5.1. I have a Windows 2003 domain that I access shared files on from XP and Windows 2003 machines. I installed 10.4.6 then updated to 10.4.11. Tiger connects just fine to shares both on XP and Windows 2003. I installed Leopard and updated to 10.5.1. Leopard STILL will not connect. I authenticate, but it fails every time. I went to the WINS setting (WINS isn't enabled on the domain) and made the appropriate workgroup changes. Still nothing. As much as I hate to admit it, I think we ALL need to admit that 10.5.* is still buggy and broken

Resolved...Leopard doesn't correctly handle passwords...my password has a "%" in it, so now I have to use "%25" to connect to shares.

Similar Messages

HT5554 How can I tell if an iPhone 5 is locked to a network ( without having to try different network sims)

How can I tell if an iPhone 5 is locked to a network - without having to try different sims from different networks?

you can't. If you really want to know, call Apple Care.

I want to connect to a network printer hp cp1518ni with different versions of windows (win7& winxp)

I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp) . My pc with win 7 work ok but the pc with win xp not "see" the printer on the network. What is the additional driver should I install?
thanks
This question was solved.
View Solution.

Hi @OHIMATAS,
I see by your post that you are unable to network the printer to the Windows XP computer, but the Windows 7 computer is connected. I can help you with this.
Make sure the Windows XP computer is connected to the correct network name, not a Guest network either.
Print a configuration page to get the printer's IP address.
Printing a Configuration Page.
Try and access the printer's Embedded Web Server on the Windows XP computer.
Type the IP address into your web browser's address bar. (Internet Explorer)
Did it load the webpage?
If you can't access the printer's EWS, then check the IP address on the computer to see if the first 3 sets of numbers match the printer's IP. They have to match to be on the same network.
Go to start, type run in the search box, type in cmd, then type ipconfig.
Check the IPV4 address.
Now check the IPV4 address for the printer.
Do the first 3 sets of numbers match?
Try and ping the printer.
In the same window, type ping printers IP address (space between ping and IP address)
What are the results?
Run the add printer wizard through printers and faxes, if you were able to access the printer's EWS.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can't get G5, Airport Express, G4 Powerbook to network

I've got an Asante ethernet router connecting my G5, cable modem and Airport Express/PowerBook. Both computers see the Airport Express and access the modem. I turned off "Distribute IP addresses" in the Airport Admin utility. And, yes, sharing is turned on.
I had no problem getting the two computers to see each other hardwired through the router. I cannot, though, get the two computers to see each other via wireless. What am I missing? All I want to do is unteather my PowerBook from the network and I can find no info about this type of hook up.
Jeff
PS - there is no info about a hook up like this in any manual or tech page

Just be be clear, you have an ethernet cable connected from the Asante router to the AX ethernet port, correct?

Mac pro - powerbook g4 - networking with cross-over cable

I connect my powerbook to the Mac pro with a cross-over cable.
Personal file sharing is on both computers (both Mac osx 10.4.8)
Question 1:
While most of the time I can make the connection work I still don't understand the logic behind it.
Sometimes I connect and the connection works immediately, on other occasion I have to restart one of the macs or both to make it work.
Is there another solution then restarting?
Please enlight me on the subject.
Question 2:
My Macpro is connected to the internet (to a ethernet-router up the line, I can not pull another cable from the router because all the ports are busy).
My powerbook is connected to the Macpro with the cross-over cable.
Can I access the internet on my powerbook through the cross-over cable. I already tried the Internet Sharing on/off thing but I couldn't make it work.
Thank you all for sharing your knowledge on the subject.
Eugene
Mac pro 2,66 Mac OS X (10.4.7) owerbook g4 12i

Hello Eugene,
Just a quick note to let you know you and others know that you do not need a cross-over Ethernet cable to connect your Mac Pro to another device. The idea of using a cross-over cable is a hold over from bygone days of Ethernet ports and products that either were before the auto-mdix or just did not implement them to save cost. Auto mdix Ethernet ports (which the Mac Pro, and every current Mac computer has) are able to detect the type of cabling/connection, and auto configure the Ethernet port for the proper connection. This mean you can use a regular Ethernet patch cable and not be concerned if it is a straight thru or cross-over style.
As for sharing your internet connection using your Mac Pro, yes, it can be done, and the capability is included with OS X. You can find step by step instructions by accessing the Help menu in the finder and entering "sharing Internet" (without the quotes).
However, I would suggest you just buy an inexpensive Ethernet Switch, to use to expand the number of ports available from your router, and then run a line to your other computer.
Tom N.

Deploy SCOM 2012 R2 Agents to Domain Servers on Perimeter Network using SCOM Gateway on different Domain

Hi, I have a bit odd situation on a SCOM 2012R2 deployment.
I have a MS on the internal network, and a Gateway Server on the perimeter network. Each server is connected to different Active Directory Forests and there are no trust relationships between them. I configured the communication between the two using certificates.
I have already connected some servers through the Gateway using certificates because there are on Workgroups, they are already approved on the MS and reporting their status.
However, I have some servers that are member servers of the internal AD domain but are located on the perimeter network.
So I've tried to configure one of them for testing to connect to the Gateway Server using a certificate using manual agent installation. Initially it didn't report on the SCOM, but then I ran the get-scompendingmanagement and saw that it showed there,
so I ended up approving the agent using Powershell and then it was reported on the Console as "Not Monitored"
First the agent was running as local system and then tried using a local admin account on the server, neither options have worked.
I get the following errors:
The OpsMgr Connector connected to scomgateway.externaldomain.com, but the connection was closed immediately after authentication occurred. The most likely cause of this error is that the agent is not authorized to communicate with the server, or the
server has not received configuration. Check the event log on the server for the presence of 20000 events, indicating that agents which are not approved are attempting to connect.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
OpsMgr was unable to set up a communications channel to scomgateway.externaldomain.com and there are no failover hosts. Communication will resume when scomgateway.externaldomain.com is available and communication from this computer is allowed.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Is this configuration possible? Or do I need to open communication ports from the agents to the MS inside the corporate network and not use the Gateway?
Any ideas if someone else has done this are appreciated.
Thank you.
Regards.
Eduardo Rojas

I'm sorry, maybe I didn't explained myself correctly, I already have the gateway up and running with some Workgroup machines connected to it using certificates, so the Gateway is indeed working. These Workgroup machines are in fact reporting back to the
Management Server on the internal network through the Gateway.
My problem is with Domain Member machines that are on the perimeter network. This machines are joined to the Active Directory inside the corporate firewall, not the Active directory from the perimeter network (where the Gateway is joined). So my question
is, can I connect these machines through the Gateway (even if the Gateway is on a different domain) or do I need to open ports and connect them directly to the management server (which is on the same active directory domain)?
Let me know if I made myself clear.
Thank you.
Regards.
Eduardo Rojas

URGENT !!! Two physical network interface with two completely different subnets - No bridges - cannot connect both

This is my urgent problem:
I have a physical machine with two physical network interfaces. I have a VMWARE player installed and a virtual machine that must use both cards on two different subnets, one directly public on the router and one intranet inside the company.
How can I just tell one net card to go on that sub and the other on the public sub ? Going crazy. Please help.
Thanks,
P.

Using VMware Player Virtual Network Editor, create a additional bridged VMnet and bind each bridged VMnet to a different physical network adapter... on virtual machine, create a virtual network adapter to each subnet, and bind each virtual network adapter to a different bridged VMnet.
For additional help with virtual network editor, check this KB: VMware KB: Using the Virtual Network Editor in VMware Workstation

The same network and id vlan in different contex in the same ACE

Hello,
I want to know if I can create 2 context in an ACE with the same ID Vlans that other context and this can be in the same network, in the configuration I explain.
Best Regards
++++++++Switch C6513++++++++
svclc multiple-vlan-interfaces
svclc module 6 vlan-group 100
svclc module vlan-group 100 60,233
vlan 60
name inside
vlan 233
name outside
interface vlan 233
ip address 10.24.16.1 255.255.255.0
no shutdown
++++++++Context Admin++++++++
hostname ACE-MOD6
ft interface vlan 350
ip address 10.24.15.34 255.255.255.248
peer ip address 10.24.15.33 255.255.255.248
no shutdown
ft peer 1
heartbeat interval 200
heartbeat count 20
ft-interface vlan 350
ft group 1
peer 1
priority 200
peer priority 150
associate-context Admin
inservice
context SERV1
description SERV1
allocate-interface vlan 60
allocate-interface vlan 233
context SERV2
description SERV2
allocate-interface vlan 60
allocate-interface vlan 233
ft group 2
peer 1
priority 200
peer priority 150
associate-context SERV1
inservice
ft group 3
peer 1
priority 150
peer priority 200
associate-context SERV2
inservice
++++++Contex SERV1++++++
interface vlan 60
ip address 10.24.8.5 255.255.255.0
no shutdown
interface vlan 233
ip address 10.24.16.5 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 10.24.16.1
++++++Contex SERV2++++++
interface vlan 60
ip address 10.24.8.6 255.255.255.0
no shutdown
interface vlan 233
ip address 10.24.16.6 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 10.24.16.1

Sharing Vlans is possible in routed mode.
Its not possible when ACE is operating in Bridge mode.
You need to use unique IP addresses in each context for shared vlans.
Also make sure to use " shared-vlan-hostid " command.
When contexts share a VLAN, the ACE assigns a different MAC address to the VLAN on each context. The MAC addresses reserved for shared VLANs are 0x001243dc6b00 to 0x001243dcaaff, inclusive. All ACE modules derive these addresses from a global pool of 16k MAC addresses. This pool is divided into 16 banks, each containing 1,024 addresses. An ACE supports only 1,024 shared VLANs, and would use only one bank of MAC addresses out of the pool.
By default, the bank of MAC addresses that the ACE uses is randomly selected at boot time. However, if you configure two ACE modules in the same Layer 2 network and they are using shared VLANs, the ACEs may select the same address bank and use the same MAC addresses. To avoid this conflict, you need to configure the bank that the ACEs will use. "
Above paragraph & More details at
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A2/command/reference/config.html#wp1447465
Syed Iftekhar Ahmed

SCOM Network Discovery - Duplicate nodes with different Device Keys (MAC address)

Hi There,
We have deplyed SCOM 2012 SP1 for server and network monitoring. In the "Network Devices" view, there are few duplicate node entries for the same device. When i look at the details of each entry, the device keys (MAC address) are
different. for example, if there are 3 entires for the same device, only one will have the correct MAC address and remaining 2 are incorrect.
Have anyone came across such issue? Any solution to avoid the duplicates?
Thanks.
Venu.
Best regards, Venu.

Last Thursday (9/25/14), Microsoft provided me with an updated version of a file that is used as part of the discovery process. At first, it appeared to only resolve the issue for some devices which was disappointing. On Saturday, I decided
to remove all managed devices and rediscover everything from scratch. We have 237 devices to monitor. Since Saturday, I had one ICMP only device duplicate itself, but after I removed the duplicate, I have not had any other duplicates created and
there have been many rediscoveries ru nsince then. So far so good. I've asked Microsoft to keep the case open until next Monday. This weekend, I have a full discovery scheduled to run on a schedule. I'll feel good after that if there
are still no duplicates.
The file replaced is "ic-iftable.asl" which is located on each management server in the path ""\[ SCOM install directory]\Server\NetworkMonitoring\rules\discovery". I'm not sure if I'm allowed to share the updated version of
the file. I have not received an explanation from the support technician yet as to the root cause. They took at least 5 sets of trace logs during the discovery and subsequent rediscovery process before giving me this updated file. I'll let
you know.

Store music on a network drive and access from different computers

hi!
i have several mac's and windows pc's here and a windows server. i want to store my music on the server and let all itunes' access the same library to have ratings etc. all the same on all machines.
when i set the itunes folder to my network drive and open itunes it does not find any of my music.
my next idea was to run itunes on the server and to use the music sharing function but my macs can't access the windows itunes library because of some error -3259. my windows itunes can access the windows itunes without problems, the imacs itunes can't
anyhow its a bad solution when i have to sync my ipods with the server since this one is in the basement
does anybody know something about itunes libraries on a network drive ?
thanks a lot
philip

Hi !
Did nobody has developed a kind of sync tool yet ? Its interesting to know that the library is always stored locally. I think it should be possible then to copy the library from one computer to all others only the network name must be the same on all computers.
I'll try it

Loss of Network signals and random internet access resulted in loss of my business

Hello
Iphone 4s is my first apple product, otherwise i am a android phone user, i wanted to give android a break and try apple for a change. Today is my first day with this phone. I am a business man and business calls to me are very important. I am deeply sadened to let apple management and others know that my first experience with apple was a sour one. First I had to cut down my sim to apple phone desired size as a result i am not able to insert the sim into other phones.; Now I am not able to make calls, every time i make a call i get call failed notice and the network bar just vanishes and reappears again. After trying a number of times i am able to make a call. No doubt the phone is costly but the loss of calls to my phone has cost me tremendously and i am very unhappy with your product as i am unable to switch to other phones. I have recieved a number of calls on my land line number, people saying my mobile number is unavailable. trust me, I will never use an apple product again if this problem is not fixed quickly, i will also discourage others not to buy your products.
I am now forced to give my contacts my new mobile number.
Yours sincerely
an angry businessman
Shaurya Chakarvarty

First, you are not speaking to Apple. This is a user to user forum.
Second, based on your description, this would appear to be entirely a carrier problem. You should be raising the issue with your carrier.
Third, getting your SIM replaced should NOT require that you change your number. If it did, you either have some kind of pre-paid service or the person who took care of you at your carrier is incompetent.
You should be talking to your carrier about these issues. There are widely reported problems of older Micro-SIM cards and cut SIMs not working properly in the iPhone 4S. As the iPhone 4S has been rolled out around the world, the problem seems to be rectified by obtaining a new Micro-Sim from your supported carrier AFTER the 4S is officially released there.
If you are using an unsupported carrier, all bets are off and the ONLY place you can really go for assistance is your carrier.
A list of supported carriers can be found here: http://support.apple.com/kb/ht1937

Windows 8.1 search of network drives shows UNC path based results

How do I go about showing the network drive based path as opposed to the UNC based path in Windows 8.1?
In Windows 7 when the user searched for files on a network drive it displayed results that contained the network drive. In Windows 8.1 these searches yield the UNC
path.
For example, Windows 7, if I search for TestFile.docx on Z: it will show a result such as "Z:\SomeFolder\SubFolder\TextFile.docx"
Windows 8.1, if I search for TestFile.docx on Z: it will show a result such as "\\SomeServer\SomeFolder\SubFolder\TextFile.docx"

Hi,
Actually, I tested in my Windows 8.1 system, the result is that it does show (example)"Z:\folder" as the search result, like as Windows 7 system, here's the snapshot:
Or am I missunderstanding something? a snapshot from your result would be helpful.
Yolanda Zhu
TechNet Community Support

Older computer on TC network shuts down, fixed with different router

I offer this as a solution to a problem with many possible reasons. It seems the router part of my Time Capsule was causing me problems. Using an old LinkSys router and making the Time Capsule be just a hard drive seems to have fixed my problem.
The situation is this: have been using a home network for three years with two wireless newer laptops and an older G4 machine as my base station with wired connections to printer, scanner, Time Capsule, and external hard drives, etc. One main use of all this is to archive photos from my laptop to an external hard drive connected to the G4 machine. A few months ago, it seemed that the G4 would die from a kernal panic whenever I tried to transfer 2 gigabytes or more of photo files. The G4 has an upgraded chip so it can run Leopard 10.5 but otherwise is the same old machine with a bus speed of 133 mHz, etc. Also, the hard drives could have problems, or repeated communication problems could have corrupted some software.
I finally decided to do a clean re-install of Leopard and that seemed to fix the problem for a while, but lately the G4 simply shut itself down with what seemed like little provocation. After careful diagnosis (and some time passing during which time whatever the disease is could have gotten worse), I narrowed the issue to one simple Finder task.
When using the laptop (wirelessly) to browse folders on one of the external hard drives wired to the G4, it would start to show me the files, but hang up, freeze and shut down if I probed folders (of 25 to 50 large jpeg files) too quickly. However, if I went to the G4 console and performed the same browse of folders, there was no problem, so I couldn't blame the G4 itself or the hard drives.
I suspect the Time Capsule router side is somehow not making allowances for the age and speed difference of the two machines on the network, or else is otherwise simply sick. Anyway, using an old LinkSys wireless router with the G4 and, with the help of hints and instructions here, keeping the Time Capsule as a hard drive only so my Time Machine backups can continue, seems to have solved my problem.
Once again, I can browse my archive hard drives to my heart's content and send several gigabytes worth of photo image files from the wireless laptop to the external hard drives served by the G4 and have no problem doing it. I am sure the official answer would have been to take the old G4 behind the barn and shoot it as it is now about 10 years old, but it is doing just fine as a base station server and it looks like it has a few more years yet to go.
I hope this helps someone with a similar problem.

Video: Nvidia Geforce 9600M GT
If you have a recent nVidia driver installed, you might want to check to see if you have either of these two modules loaded - check in the nVidia console:
PhysX, or 3D Stereovision. If you have them, definitely disable 3D Stereo, and test. If no improvement, disble PhysX and test.
Also, try adjusting your Hardware Acceleration. If Max, set to Min and test. If Min, set to Max and test. If either helps, try incrementing up, or down, until it no longer helps.
Last, check your OpenGL settings. If ON, turn OFF. If OFF, turn ON.
It appears that you have a laptop. Is that correct?
Good luck,
Hunt

Can I configure my network settings to use two different proxy configurations?

At work, I have a proxy server, but away I do not. I would like the correct proxy settings to load in each case. Currently, I use two different locations. This works acceptably, but I have to open my network settings and manually switch locations when my location changes. I have experimented with creating multiple ethernet ports. I can create a location with two ethernet ports, but I can't find a way to cause the correct one to activate. The first port in the search order is loaded even if the proxy is not found.
Please let me know if you can help with this. Thank you.

I'm not sure of another way to do what you want, but there should be a Location menu in the Apple menu. You don't need to open the network prefs to change locations.

Is it possible for me to share an itunes playlist with someone who is not on my local network and who has a different itunes account? I would like to send a playlist to my friend as a gift, but don't want to buy all the songs before I know it'll work.

This is what I found when searching for an answer online, but iTunes has changed so much since this posting that I don't know if the answer is still valid:
Give your playlist as a gift
You can gift a playlist to a friend, assuming everything is available on the iTunes Store.If you want to share the contents of you favorite playlist with a friend, you can send it as a gift (within the limits of what’s available on the iTunes Store, that is). If you select a playlist, then click the small arrow icon to the right of its name, a dialog box will display asking if you want to give this playlist or publish it on the iTunes Store. If you click Give Playlist, iTunes will look at your songs, then take you to the iTunes Store. This is, of course, limited to what’s available, and if your playlist contains any songs that are album-only sales, you won’t be able to give these; in fact, if your playlist contains any album-only songs, the process will stop, and you won’t be able to give anything from that playlist until you remove the album-only songs (and iTunes won’t tell you which ones they are, but these are generally songs that are longer than 10 minutes). But assuming you can give the playlist you’ve created, I’m sure your recipient will be very happy.

Hi czigrand,
Thanks for visiting Apple Support Communities.
Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
iTunes: Sending iTunes Gifts
http://support.apple.com/kb/HT2736
Best Regards,
Jeremy

1 powerbook 1 network 2 os's 2 different results

Similar Messages

Maybe you are looking for