1 reader and 2 computers

I wonder if anyone out there can help me with a problem I have recently encountered.
Firstly I have a Sony PRS-650 which I purchased in the UK 2 years ago.  At that time I had a small netbook running windows 7. As such I uploaded the reader software and the ADE software, for the downloading and transfer of books.  Everything was fine until a few months ago. First the little netbook disappeared, however I had just purchased an iMac so decided to transfer my reader and use the settings software to upload the relevant software to pair the device.
This is where my troubles began: firstly once i downloaded the software it would not let me access my purchases.....so i had to authorise my computer which i did (I should add that i also now have a new email address at this point).  I could then access my old purchases so thought i would be able to purchase and download some new books and transfer them to my reader.
How wrong I was.....I succesfully downloaded the books from my reader to my elibrary but I am unable to transfer them to my reader..it just keeps saying this computer is not authorised to access this book.
I think I had a different set of usernames and passwords on my old netbook (the minds starting to go), I thought i had the same on the new one but obviously not. As such I am possibly running parrallel sets of ADE and Reader and as such I am now stuck in limbo with purchased books that I can't access (new and old).
If anyone can shed any light as to how I can combine accounts, or delete account or move all my purchases to one account I would be most grateful.  If i have missed anything obvious to allow me to do this I apologise, but I have looked everywhere and nothing jumps out at me to correct my problem.
I love my reader and use it for work and leisure, but I am becoming frustrated as to how I resolve my problems.

You may need to check the Reader forum. I have no idea why the problem exists, but it may be that it is something particular to Reader and not Acrobat. The link for the Reader forum is at the top of this forum.

Similar Messages

  • I have used Sony for the past 5 or 6 years.  They recently stopped selling books and migrated their customers to Kobo.   In uploading the Kobo site it looks like I added a new Adobe ID.  Then my reader and computers were out of sync.  When I try to downlo

    I have used Sony for the past 5 or 6 years.  They recently stopped selling books and migrated their customers to Kobo.   In uploading the Kobo site it looks like I added a new Adobe ID.  Then my reader and computers were out of sync.  When I try to download books I get that they were already downloaded by another user, but also that they are in my library.  However, I can't find them, and if I do download, it gives me an error message that the book is DRM protected.  How do I get to the point where I can download books again?

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • How to share files in a network and allow read-and-write to a specific computer only?

    I have several computers in my network, and I want to share a folder and allow read-and-write from computer A to Computer B only, and omit computer C. How do I do that? Thanks.

    Thanks for the suggestion. I like this approach as Java is more familiar to me than other languages.
    Our DBA is out of touch today, so I could not grant the javauserpriv to my database user. I tried to run the script anyway in the chance that my user had the privs, and it seemed to have hung. I am now combing Oracle's site for more documentation so I can write some tests to see if I can get a basic Java object working. Under what heading would I find this?
    ajt

  • Events from my subscribed to Yahoo calendar are showing up in iCal one hour off and all calendars and computers have been reset to Central Time.

    I Use Yahoo calendar as my main calendar so my dh can access it from work, so I subscribe to it for iCal. I recently moved from Eastern Time zone to Central. I didn't re-set all my calendars and apps right away. I have all my calendars and computers on Central Time now but events from my Yahoo calendar are showing up in Eastern Time in iCal. I cant edit them on my Mac or iPad because they're events from a subscribed to calendar.
    So, how do I get these events to show up at the right time?
    Thanks,
    Reluctant Texan

    This is a posting of a problem and solution.

  • New iPod Touch 5th generation won't charge. Help? It's brand new, I got it for Christmas in 2012. Please help! I've tried diffferent cords, outlets, and computers. I plug it in, iTunes recognizes the device, but it still won't charge.

    Please help. It started about a week ago, it was charging fine the day before and then I plugged it in and it didn't charge. Occasionally it would begin to charge, but sometimes not. I've tried different cords, USB ports, wall chargers, and computers but it would barely work. Now, it refuses to charge at all. If it dies, and I won't be able to use it anymore, I won't be able to get a new one. Please help me!

    It's still under its original factory warranty, so unless you've damaged it in some way, it should be covered.
    First, try giving it a reset. Hold down the sleep and home keys, past when you see the red power down slider and until you see the silver apple. Let it reboot and see if that helps.
    if not, contact your local apple store and make an appointment and let them check it out.

  • Windows 2008 Server - Cannot run Active Directory Users and Computers

    Hi,
    I am running Windows 2008 Server with latest windows updates installed. Directory Services Role also.
    I attempt to open Active Directory Users and Computers tool and I get a;
    Microsoft Visual C++ Runtime Library error;
    "The Application has requested the runtime to terminate it in a unusual way. Please contact the application's support team for more information"
    I click ok, then get the following debug info;
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: mmc.exe
    Application Version: 6.0.6001.18000
    Application Timestamp: 47919524
    Fault Module Name: msvcrt.dll
    Fault Module Version: 7.0.6001.18000
    Fault Module Timestamp: 4791ad6b
    Exception Code: 40000015
    Exception Offset: 0000000000029b06
    OS Version: 6.0.6001.2.1.0.272.7
    Locale ID: 3081
    Additional Information 1: 43aa
    Additional Information 2: cf3a46656318492c1997480001b6b0e0
    Additional Information 3: 3837
    Additional Information 4: 92f72e0d0589ff77cef51e0a413aeff6
    Read our privacy statement:
    http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
    If someone could please assist, it would be very much appreciated.
    Regards
    B

     
    Hi,
    To solidly troubleshoot this kind of issue, we need to debug dump file. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
    To obtain the phone numbers for specific technology request please take a look at the web site listed below:
    http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
    However, I am also glad to share my research.
    Some third party applications may lead to this error. Please check if you install other third party applications on Windows server 2008?
    Also, please follow the article below to perform necessary steps to see how it's going?
    FIX: You receive an "invalid page fault in module MSVCRT.DLL" error message after you install the run-time libraries from Visual C++ 6.0
    http://support.microsoft.com/kb/190536/en-us
    Hope this helps.
    Best wishes
    Morgan Che

  • How to create "folders" in Active Directory Users and Computers?

    Hello Community
        In Windows Server 2008R2 when you go to Active Directory Users and Computer
    you will see icons of folders such as:
        -  Builtin has a folder icon
        - Computers has a folder icon
        - ForeignSecurityPrinicpals has a folder icon
        - Domain Controller as a folder icon
        - Managed Service Accounts has a folder icon
        - Users has a folder icon
        All of the above folders are visually identical.
        If you right click and select “File” –  “New”
     on any of the selections the icon
    will not look like the folder icon they have their own icons which look different
    from the "Folder" icon.
        I would like to create a “Folder” that looks just visually exactly like the ones
    mentioned above, how can I create those types of Folders in Active Directory User
    and Computers?
        Note: I would like to put users in the folders.
        Thank you
        Shabeaut

    Hi,
    you should use OUs (an OU is they type of object (folder) that is available for you to easily create.
    The object type you are asking about is a "container", and there are various reasons why an OU is more flexible (applying GPO, etc).
    Refer: Delegating Administration by Using OU Objects
    http://technet.microsoft.com/en-us/library/cc780779(v=ws.10).aspx   
    and the sub-articles:
    Administration of Default Containers and OUs
    http://technet.microsoft.com/en-us/library/cc728418(v=ws.10).aspx
    Delegating Administration of Account and Resource OUs
    http://technet.microsoft.com/en-us/library/cc784406(v=ws.10).aspx
    Also: http://technet.microsoft.com/en-us/library/cc961764.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • I have the latest Mac Air 13" and I have a Seagate 500MB external hard disk I cant copy or Cut any files on the hard disk and I cant even delete any files. I have the settings as Read and Write in the get info tab. Please help

    I have the latest Mac Air 13" and I have a Seagate 500MB external hard disk I cant copy or Cut any files on the hard disk and I cant even delete any files. I have the settings as Read and Write in the get info tab. Please helpand also note that my hard drive was formatted on a Windows 7 Laptop.

    thats the problem, its in MSDos (Fat) or NTFS for Windows.
    Options.....
    1. offload all that data on the HD onto your PC, THEN format the HD in EXFAT for use on BOTH PC and Mac for read/write.....then reload all (or as you need) that data back onto the HD
    2. get another HD, and format it for Mac OSX extended journaled.
    FAT32 (File Allocation Table)
    Read/Write FAT32 from both native Windows and native Mac OS X.
    Maximum file size: 4GB.
    Maximum volume size: 2TB
    You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
    NTFS (Windows NT File System)
    Read/Write NTFS from native Windows.
    Read only NTFS from native Mac OS X
    To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
    For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
    Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
    AirPort Extreme (802.11n) and Time Capsule do not support NTFS
    Maximum file size: 16 TB
    Maximum volume size: 256TB
    You can use this format if you routinely share a drive with multiple Windows systems.
    HFS+     ((((MAC FORMAT)))  (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
    Read/Write HFS+ from native Mac OS X
    Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
    To Read HFS+ (but not Write) from Windows, Install HFSExplorer
    Maximum file size: 8EiB
    Maximum volume size: 8EiB
    You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
    EXFAT (FAT64)    ------Can read/write from both PC and Mac
    Supported in Mac OS X only in 10.6.5 or later.
    Not all Windows versions support exFAT. 
    exFAT (Extended File Allocation Table)
    AirPort Extreme (802.11n) and Time Capsule do not support exFAT
    Maximum file size: 16 EiB
    Maximum volume size: 64 ZiB
    You can use this format if it is supported by all computers with which you intend to share the drive.  See "disadvantages" for details.

  • What Floppy Drive can I use with Mountain Lion to read and write floppy which can be read by SE30 with 7.1

    I want to File Exchange between an iMac with 10.8.4 and a SE30 with 7.1.
    All I want to do is install some software, such as Word 5.1 and a Chess game and some Fonts.
    I have an external USB Floppy Drive but my iMac can only write to it IF I format as FAT, if I format it with the SE30 it can only be read and not written onto by the iMac.
    Is there a way I can actually format/read/write Macintosh extended (HFS+) with Mountain Lion?
    The external USB Floppy is a generic black one I bought from Amazon last week.
    Someone else said I should get a Macally USB Floppy Drive and that reads/writes HFS+ etc with 10.8 no problem.
    Is this because the Macally was released along with the Bondi Blue iMac?
    I have tried using Apple Exchange on my SE30 - recorded some files onto the FAT formatted Floppy, and read it using Apple Exchange, but when 'translating' the Files transferred over as generic files which were no longer Macintosh programs or Files (eg Word 5.1 application or extensions/ Font suitcases etc) and could not be read.
    Is there a way round this?
    Or is there any way I can mount/read/write from the generic USB Floppy DRIVE with Sheepshaver (with 7.5.3)?
    Any help or advice would be most appreciated.

    >surely there must be some Terminal command or workaround for 10.8 to be able to Format in HFS?
    Using dd to write an existing HFS disk image to a floppy may still work (but formatting/writing HFS from the operating system does not). You may want to compare this with the technique described in the article below. Obviously, this is only of interest if one wants to try creating floppies from certain (Disk Copy 4.2-style) downloaded 1.44 MB disk images.
    http://lowendmac.com/brierley/08pb/classic-mac-boot-floppy.html
    >If I got hold of an old iBook or Powerbook G4 (my sister has one) could I plug the USB Floppy drive I have into one of these and copy files over this way?
    At least according to the following Wikipedia article, writing HFS has not been supported since Mac OS X 10.6. This should mean that your idea with the USB floppy drive connected to one of the older computers mentioned could work. BTW, I do not think that the USB floppy drive type/make/model is of importance in this very context.
    Another idea could possibly be to use an even older intermediate computer for other file transfer methods (without a floppy).
    A PowerBook 520/520c/540/540c could run Mac OS 8.1, if at all necessary. It has built-in Ethernet (an external AAUI to RJ-45 transceiver is used), which would allow TCP/IP connections over a network. A LocalTalk connection to the SE/30 can be established via a plain Macintosh MiniDIN-8M to MiniDIN-8M printer cable. With the correct SCSI cable/adapter, one could also use the PowerBook as an external hard disk for the SE/30 in SCSI disk mode.
    A PowerBook 5300 can run Mac OS 8.1 or higher, if necessary. It does not have built-in Ethernet, but a PC Card (PCMCIA) network card can be used. Furthermore, with an inexpensive PC Card adapter for CompactFlash and a CompactFlash memory card, the computer would have a simple removable "hard disk". The CF card (in Mac or PC format) can be read by a modern computer (a USB reader may be needed), making it ideal for file transfers. LocalTalk can be used here too, and so can SCSI disk mode (HD target mode).
    Jan

  • After update apple tv 2 on itunes and get error 1602 i start my apple tv and see no contents or any programs there just i see settings and computers?

    after update my apple tv 2 and get error 1602 on itunes, i start it and found no content showing there only settings and computers?
    please any answer.
    my itunes is the latest.

    Welcome to the Apple Community.
    Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
    Firstly, are you receiving any date and time errors when you turn on your Apple TV?
    Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
    If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.

  • ITunes Match info says"With iTunes Match, you can download some or all of your music directly from iCloud on a total of up to 10 devices and computers." but when I try to add a computer it tells me i have reached my maximum of 5 computers.

    iTunes Match info says"With iTunes Match, you can download some or all of your music directly from iCloud on a total of up to 10 devices and computers." but when I try to add a computer it tells me i have reached my maximum of 5 computers.

    You have old computers authorized that you are no longer using more than likely.
    From http://www.apple.com/itunes/features/
    Authorize and Deauthorize
    Purchases you make from the iTunes Store can be played on up to five computers that you authorize using your iTunes Store account name and password. To authorize or deauthorize a single computer, choose Authorize This Computer or Deauthorize This Computer from the Store menu. If all five authorizations are being used, you can deauthorize all your computers at one time by choosing View My Account from the Store menu and selecting Deauthorize All.
    You can then restart the authorization process with each current device.

  • ITunes Library on an Airport Disk?  Read and write from multiple Macs?

    OK, I've scoured the forums for an answer to this, but haven't found anything definitive. Apologies if I've missed the answer, but here's what I want to know:
    I have an iMac as a primary computer, plus a Mac Mini hooked up to my entertainment system, and my girlfriend's powerbook in the house too. There seem to be two main iTunes options: either constantly try to keep all three iTunes libraries synchronised by running around importing files, etc.; or just keep one library, and share it over the network.
    Right now, I am keeping my iTunes library on my iMac and sharing it with the Mac Mini and the powerbook. If anyone wants to add music (or other content) to the library, it has to be through the iMac. Obviously the iMac has to be on for any other computer to access the shared library.
    I want to try to make things simpler by having a single "network" iTunes library that all computers to be able to share (read AND write). I envisage having this "iTunes Server" on an external HD connected to my Airport Extreme as an Airport Disk. If I move the entire contents of ~/music/iTunes (including artwork, library files, etc) to this central location, will the three Macs be able to deal with this, ie can multiple computers share an iTunes library database on an airdisk? Will I be able to stream content from this library to all three computers? Will I be able to import new music into the library from any one of the three computers?

    I am having a very similar problem. I have all of my music saved on a large external disk connected to my airport. I would like to be able to just play what i want from this disk, but i don't like having to download every track i want to listen to. I still want to be able to bring my laptop with me and have some music so i don't want to make this external disk my library folder. Is there a way to play it on my computer similar to a shared library on another computer? Am i asking to much out of apple?

  • Memory leak in Real-Time caused by VISA Read and Timed Loop data nodes? Doesn't make sense.

    Working with LV 8.2.1 real-time to develop a host of applications that monitor or emulate computers on RS-422 busses.   The following screen shots were taken from an application that monitors a 200Hz transmission.  After a few hours, the PXI station would crash with an awesome array of angry messages...most implying something about a loss of memory.  After much hair pulling and passing of the buck, my associate was able to discover while watching the available memory on the controller that memory loss was occurring with every loop containing a VISA read and error propogation using the data nodes (see Memory Leak.jpg).  He found that if he switched the error propogation to regular old-fashioned shift registers, then the available memory was rock-solid.  (a la No Memory Leak.jpg)
    Any ideas what could be causing this?  Do you see any problems with the way we code these sorts of loops?  We are always attempting to optimize the way we use memory on our time-critical applications and VISA reads and DAQmx Reads give us the most heartache as we are never able to preallocate memory for these VIs.  Any tips?
    Dan Marlow
    GDLS
    Solved!
    Go to Solution.
    Attachments:
    Memory Leak.JPG ‏136 KB
    No Memory Leak.JPG ‏137 KB

    Hi thisisnotadream,
    This problem has been reported, and you seem to be exactly reproducing the conditions required to see this problem. This was reported to R&D (# 134314) for further investigation. There are multiple possible workarounds, one of which is the one that you have already found of wiring the error directly into the loop. Other situations that result in no memory leak are:
    1.  If the bytes at port property node is not there and a read just happens in every iteration and resulting timeouts are ignored.
    2.  If the case structure is gone and just blindly check the bytes at port and read every iteration.
    3.  If the Timed Loop is turned into a While loop.
    Thanks for the feedback!
    Regards,Stephen S.
    National Instruments
    Applications Engineering

  • Hide all except one object in Active Directory Users and Computers.

    Hello,
    I have a question.. I need to allow to one group of "administrators" creating users in one OU and adding computers to the domain, nothing else. I allowed them to log on DC using the GPO "Allow log on locally", because I don't want to give
    them administrator rights, I allowed them to do these operations on one OU through delegation wizard and now I need to make all OUs, groups etc. invisible to them except this OU. What is the best way how to achieve this? Thank you...
    d.

    I would disable the ability to allow them to login. I suggest to create a Computers OU that you can delegate to the "admins" to add computers, and don't use the default Computers container.
    I assume the admins are using Windows 7 or newer. You can customize an RSAT installation to just provide the ADAC.
    Description of Remote Server Administration Tools for Windows 7:
    http://support.microsoft.com/default.aspx/kb/958830
    Remote Server Administration Tools for Windows 7:
    http://technet.microsoft.com/en-us/library/ee449475(WS.10).aspx
    Remote Server Administration Tools for Windows 7
    http://www.microsoft.com/downloads/details.aspx?FamilyID=7D2F6AD7-656B-4313-A005-4E344E43997D&displaylang=en
    Customizing - Installing Remote Server Administration Tools (RSAT) for Windows 7
    http://www.petri.co.il/remote-server-administration-tools-for-windows-7.htm
    Or if you want to chop it down and control it further, create a custom ADUC with just that OU you've delegated. I've done this in the past and worked fine for my customer:
    Delegate an Organizational Unit (OU) in Active Directory Users and Computers (ADUC), then create a custom MMC or customized RSAT
    http://blogs.msmvps.com/acefekay/2014/09/04/delegate-an-organizational-unit-ou-in-active-directory-users-and-computers-aduc-then-create-a-custom-mmc-or-customized-rsat/
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • "The home folder could not be created because the network name cannot be found" error in AD users and computers

    Our home folders are stored on a non-windows NAS device and with Windows XP and 2003 we've always got the above error when creating or modifying users home folders, even when the shares were al ready created and being used.
    However this was never really a big issue as the error that popped up was really for information and finshed with a "we've modified the user properties anyway, please create the share manually" type message.
    Unfortunately now we are moving to windows 7 and 2008R2, this last part of the the message is missing and it won't accept the correct value. 
    This issue may be in the way that the NAS device shares the folder, as only the username that matches the folder name can access the share.  This behaviour can't be modified.
    Is there a way to get Windows 7/2008R2 AD users and computers to behave the same way that Windows XP/2003 does , i.e. don't try and create the share just set the value in the user properties  ?
    The AD is still at 2003 level and we can still use Windows XP/2003 clients to make the changes but this is a bit of a limitation.

    The KB article is almost what we have apart from theitalic underlined
    part
    Consider the following scenario:
    You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
    You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
    You open the Properties dialog box of a user account.
    The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
    You set the Remote Desktop Services Home Folderattribute to the shared folder path.
    NoteThis attribute is located on the
    Remote Desktop Services Profiletab.
    You click Apply or OK.
    In this scenario, you receive the following error message:
    The home folder could not be created because: The network name cannot be found.
    Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
    I think the important bit is
    The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
    We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

Maybe you are looking for