1 request Idocs created for message type MATMAS

Hi Experts
I have done necessary config.
I have attempted BD10 and BD11.
I have got message that "1 request Idocs created for message type MATMAS"
But iam unable to find the material in target system.
Please suggest what need to be done.
regards
ramSiva

Marias,
And in PI, after having changed the password (why not), have you unlock this user account ? in SU01 of PI, you have a lock button.
if you did it, and changed also the password, as explained, you have perhaps another (or several) program like a RFC destination which uses another password, and so after some exchanges... with a bad/old password, you have your message "too many...", and then the user is again locked...
If you change the password in PI, you should change it in all application which uses this user. I hope you have not the same user from ECC to PI, than from a third-party to PI...
that's why: the use of such technical users have to be referenced in a doc. By this way, if password has to modifiy, we know where we have to update it (mainly in different RFC destination).
Mickael
Edited by: Mickael Huchet on Dec 5, 2011 5:33 PM

Similar Messages

Problem LSMW + IDOC method for message type : MATMAS

hi friends,
I am using LSMW + IDOC method Message : MATMAS , idoc type : MATMAS03 .Setting every thing are fine. Finally Material is not created with error "message have been issued number : <idoc number>".
data : material, industry type, material type, description, Basic unit of mesure.
Please help me.
Balaji.T.

Hi,
I have nothing found regarding your issue. But maybe a look at SAP note 638058 will give you a hint.
Regards,
Klaus

Error MSG : Create a partner profile for message type 'MATMAS'

Getting Error MSG : Create a partner profile for message type 'MATMAS'
While running LSMW Idoc generation process

See the below link and it has all screen shots how to configure ALE like partner profile,logical systems,RFC
http://searchsap.techtarget.com/general/0,295582,sid21_gci1130337,00.html

How to send IDOC with extended message type MATMAS

Hi Experts,
I am looking for a solution to send open PR & open PO related data for diffrent materials through as IDCO in XML file.
Scenario is i have to show a report in a 3rd party system for open PR & open PR that too will come after selection some materials. That means select a materials & it will show all the open PO & related data in a report.
The rough idea for the solution i got is I can save the data in XML file in the system. For this i have to send IDOC. but the problem is there is no message type for PR. IF i am not wrong i can extend the MATMAS05 for a segment that will have PR related info.
Now what to do with that how to send the IDOC do i need to create another report to send IDOC or i can send the extended one through BD10. I tried it but it shows error message "0 communication idoc sent" so I dont no y such error is coming i think i am not filling the extended idoc. But again my QUestion is how to do that.
Can i use BAPI also for such work, if then how it can be helpful.
If anyone have any other solution Please help me out of this.
Regards,
Nik

Hi Mahesh,
Thanks for your reply.
My requirement is bit different. i have to send Open PR data for diffrent materials. In a 3rd party application user will search for few materials which will generate a report that will show the PR related data for those material.
That means for few selected materials there will be few PR's which may be open, i have to show those in my report.
Eg: material A, B. are in PR 00001 & material B, C in PR 00002.
After selecting materials A to C report will show
Material                 PR No                   Item No                Quantity
A                           00001                    10                             1
B                           00001                     20                            3
B                           00002                     10                            3
C                           00002                      10                           1
Same thing i have to do for open PO & open Sales order also.
Can u please help me to provide the solution how can i proceed for it. U have given the Message type & a bapi how it will help in my issue?
I got a suggesion from someone that extend message type matmas for PR, PO, SD related data & send the idoc. but i am confused how to pass that much data ina single IDOC.
Regards,
Nik

IDOC reduction for MSG type MATMAS

HI all,
i have a requirement where clients need only some standard segments and some particulars staructure.We are using MATMAS as a message type and MATMAS05 as a basic type.Basically it leads us for IDOC reduction. Can someone pls help me out for getting this requirement.
Rgds,
Raghav
Edited by: raghav on Jun 9, 2009 12:28 PM

Hi,
Launch the BD53 transaction (IDoc Reduction Maintenance: Initial Screen). In the Reduced message type field, type the value ZVISTAPM_REDUCED, then press the Create button. In the popup window which appears, type in the Message type reference field the value MATMAS.
Validate.
In the next popup window, type a short description for the new reduced message type.
Validate.
In the following window, select the segments and the fields needed for the new reduced message type.
Save.
KR Jaideep,

Idoc generation for message types

Hi All,
regarding IDOC generation....
how do we activate the message type so that every time the application data which is created or changed or deleted generates the idoc and send it to other system. If iam not using Chnage pointers technique then i would not be activating the message type in BD50. In such case ie if the message type is not present in BD50 list and if change pointers is not used to transfer that message type . How do we genrate the idoc for such message types.
Thanks
Avinash

Hi,
For ur scenario u need to go for change pointers method only.U have other options like distributing master data and transactional data..But i don't think anything otherthan change pointers is useful.
Regards,
Nagaraj

Duplicate IDOC created for basic type PEXR2002

Hi,
We are using PEXR2002 idoc for some document postings in FI. For a segment EIEDP02, when trying to write a BELNR field value which exceeds its size of CHAR 35. Its creating a duplicate segment with same key value. Because of this, the idoc not getting created and ends up in error.
Could you please anyone help me in this regard?
Thanks and Regards,
Vimala P

Hi,
In our process, the EIEDP02-BELNR value is actually filled with document text field value which is of length more than 35. What is happening right now is, if the length of document text having more than 35 characters and then with first 35 character of BELNR value one segment is created. And it again create one more segment EIEDP02 with BELNR value having the rest of the fields value(>35 characters). Thus creates duplicate segments which results in IDOC creation failure
Thanks and Regards,
Vimala P

Inbound problem for message type WPUUMS

Dear all,
I want to receive the IDOC data for message type WPUUMS from a java server. Currently i am working on sample values for segments
E1WPU01
E1WPU02
E1WPU03
E1WPU04
E1WPU05
E1WXX01
I am facing problems in passing the correct values .
Its throwing a error message status 51.(Application document not posted) IDoc not fully processed.
can you help me with some dummy data for all the fields in the above segments.
reply ASAP
regards
arun

You have to analyze where exactly the problem is.
There are several reasons why the Idoc did not post:
1) The Data you are sending to post document may be wrong. You may have to validate against valid data in Database.
2) Thre may be some mandatory data which you are not passing through IDoc (Idoc data may be missing).
It is not possible to answer a generic question like this with perfect answer.
Best way is to debug and find out why exactly the problem is, if you know the error message (you may see it in Status record of this IDoc).

Could not determine recipients for message type ACLPAY

Dear friends,
I am getting error while doing Invoice Verification as "Could not determine recipients for message type ACLPAY"
Please advice how to resolve this issue.
Thanks

Hi
This is IDOC settings for message type ACLPAY there is no receipient please check transaction code WE20 and please get in touch with your technical team
Thanks & Regards
Phaneendra

LSMW: ALE/IDOC, getting the Create a partner profile for message type

Hi Gurus,
In my current project, i need to upload the employee data using the ALE/IDOC method with the LSMW
when i'm generating the idoc in the 13th step, its posing the information message stating that:
Create a partner profile for message type 'ZEMP_MSG'
In partner profile i already assigned the message type .
How to solve this issue, <inappropriate urgency removed by moderator>
Thnks&regards,
sree
Edited by: Thomas Zloch on May 13, 2011 9:55 AM

This forum's aim is not only to search for information and ask the members questions, but also to share knowledge. When you have asked a question and found a solution, do share with the rest.

Create a partner profile for message type - 'CRMXIF_ORDER_SAVE_M'

Hi
I am trying to create IDOC generateion through LSMW.
i AM GETTING THE MESSAGEcreate a partner profile for message type - 'CRMXIF_ORDER_SAVE_M'
How do I create this profile??????

Hi,
Execute transaction BD64.
Identify you distribution Model,
Select the leaf node, and from menu select
Environment->Generate Partner Profile
Here in you specify 'Output mode' and 'Processing Mode'.
Click on Execute.
Check if any error occurs (Marked with Red color).
Try creating the IDOCs
Best Regards,
Pratik Patel
Reward with points if it is of any help to you!

Error : No authorization to send IDocs with message type MATMAS

Hi All,
My scenario is FILE-XI-IDOC.
I am getting chequered flag in SXMB_MONI,but in that under outbound status I am getting red flag.
When I check in SM58 I am getting message as "No authorization to send IDocs with message type MATMAS".
Do I need to give any authorizations on XI side or on R/3 side?
If so, what is the authorization required?
I could not find the note :837595.

<i>You use the IDoc Adapter in the Exchange Infrastructure and you try to use the IDocs to receive or send data. For these IDocs, an attempt is made to load the IDoc metadata from an R/3 reference system with an SAP NetWeaver Release lower than 6.20.
This occurs either at runtime, whereby the relevant messages run into 'System error' status, or when you use transaction IDX2 during manual loading of the metadata. In this case, the reference ystem is called by RFC and the logon user of the RFC destination does not have the necessary authorizations for determining the metadata.
Solution
In transaction PFCG, extend the role of the logon user by adding the following authorizations:
Authorization object S_RFC
      Field name RFC_TYPE value FUGR
      Field name RFC_NAME value EDIMEXT, SDTX
      Field name ACTVT    value 16
Authorization object S_IDOCDEFT
      Field name ACTVT value 03
      Field name EDI_CIM value ' '
      Field name EDI_DOC value TXTRAW01
      Field name EDI_TCD value WE30
Authorization object S_CTS_ADMI
      Field name CTS_ADMFCT value TABL
Authorization object S_TABU_DIS
      Field name ACTVT      value 03
      Field name DICBERCLS value</i>
from the note mentioned above.
Regards
Bhavesh

ALE Configuration for PEXR2002 IDoc and PAYEXT message type sending to XI

Hi all,
I need ALE Configuration for PEXR2002(Basic Type) IDoc , it's message type PAYEXT.
I don't know ALE Configuration for sending data from SAP IDS to SAP XI.????
I need ALE Configuration doc/pdf??
Please give me some guidline for this..
Regards,
Umesh

Umesh,
I was wondering if you have had any luck creating the configuration for PEXR2002 Idoc, PAYEXT message types, and sending the result set to XI.
I need to perform the same task within our R3 environment using the FTP protocol in XI to send the file to the Bank to be processed.
Any help or direction would be great.
Thanks,
Dave

Error In MIGO "Could not determine recipients for message type ACPJMM"

Dear all,
At the time of transaction Goods Receipt(MIGO), I am getting the error message "Could not determine recipients for message type ACPJMM".
System Diagnosis is as below
An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type
I have check the ALE Settings in we20 and we21
and have assigned the following message types under Logical syste Partner Type
Outbound
ACPJMM
MATMAS
MBGMCR
RSINFO
RSSEND
WHSORD
Inbound
ACPJMM
DEBMAS
FTDABA
FTDACO
FTDACU
INSPECTIONPLAN_CREATE
MATMAS
MBGMCR
RSRQST
WHSCON
I have also created and Assigned a Logical System to the client and have also created a RFC with the same name
I have checked all settings is SALE and they are Fine.
This is a single system
Please help this is really ugrent
Regards
Suhail John

Hi,
Goto table TRWCA (T Code SE30) and deselect all the checked entries.
This should solve your problem.
Regards,
Priyadarshi

How to create a message type

Hi, All
I need to create a message type, Enter the fields change pointers eligible for key changer in this message type. Extract program needs to be created and this program accesses the key changer fields status and the changed values on day to day basis for the message type using tables BDCPS & BDCPV.
Can any one tell me how to do this.
Many Thanks.

Hello siri
I think if you talking with respect to ALE/IDOC or EDI/IDOC..........this posting has to be entered in data transfer.........................and you can create message type using trasaction we81.
Vj

1 request Idocs created for message type MATMAS

Similar Messages

Maybe you are looking for