1 SATA + 3 IDE Config help please
Hi, I have an 865PE - Neo2 - LS.
Currently I have 1 SATA HD configured as the first boot device + a CDRW and a DVD on IDE2.
I would like to add a second standard IDE HD for some extra storage but try as I might I cannot get the bios to recognise the second drive.
I guess what I am asking is this:
1 is it possible to have the following config on this board
1 SATA
1 IDE HD
1 IDE DVD
1 IDE CDRW
2. If so, could some kind soul tell me how......PLEASE
Thanks
Aus
AUS,
I personally have the following drives running on my MSI 865PE Neo 2 S mobo without any problem...:
1 x DVD-Writer(IDE 1, Master),
1 x DVD(IDE 1, Slave),
1 x Seagate 80GB HDD(IDE2, Master),
1 x Maxtor 80GB HDD(IDE2, Slave),
1 x Seagate 120GB HDD(SATA 1).
I'm using this config:
ATA OnChip Operate Mode: Native
ATA Config: SATA
PATA Keep Enabled: Yes
PATA Channel Selection: Both
And running in Win2k SP 4, AMIBIOS v1.0
Check and make sure that you are not using any old IDE cable for the HDD and make sure that you did set to either Master or Slave mode, not Cable Select and make sure that you are getting power from the +12v molex connector that plugged to the HDD.
Similar Messages
-
my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into recovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please???
By the way, i am using Windows 7 x64 and updated itunes
-
Hi can anyone help me, my daughters macbook will not pick up the wireless signal in her bedroom when me and my wifes iphone picks it up easy. any ideas to help please.Andy
P.S i;ve heard a comment about the G5 case not being
great for wireless so the cards come with a plastic
antena that connects to the back of the machine - i
never recieved one of these - could that be the
problem?
Newer G5 PowerMacs don't require the external t-shaped aerial, earlier models do and that is probably the cause of the problem.
iFelix -
I made a update to the ios 6 and now its just showing the apple logo and going off to black and repeating tat any help please?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
B1UP Validation Config - help please
Hi Experts
I would like to create a validation on Sales Order for when a customer has a particular payment terms of Cash Basic.
In these cases I need users to record the method of payment on a UDF called U_CashBasicType
The UDF has a linked table and 7 options (not including blank) - BA, CA, CC, CH, OK, RP, VO
I would like SAP to throw an error message when the customer is cash basic (GroupNum field 139.47)
I have so far created a B1 Validation Config in Add/Update form mode on event Validate
The SQL condition is:
IF(SELECT GroupNum FROM OCRD WHERE CARDCODE=$[$4.0.0]) =-1 and ordr.U_CashBasicType is NULL)
BEGIN
SELECT 'CASH BASIC' FOR BROWSE
END
the function to execute is a simple status bar error which block the event.
All looks okay to me but it doesn't see to run when the customer is cash basic and the UDF is blank (null)
Any ideas what I'm doing wrong?
Fairly new to B1UP and my only training has been through the samples on the Boyum website (not great!) so apologies if this is an obvious fix.
Best Regards
GeoffHi Geoff,
i thing you want to Stop the Sales Order let suppose Payment Terms Is 'Net-30' And UDF is Null So
IF (ordr.[GroupNum]=-1 and isnull(ordr.U_Fetch,-1)=-1 )
BEGIN
SELECT 'CASH BASIC' FOR BROWSE
END
You can Also do it on the Back end in Transaction Notification SP ...
I Hope this may be Helpful .
Regards,
Mayank Shah -
Hi all, I have recently been given a new work iphone. It was my bosses. He wants me to keep all his old contacts already on the iphone. However I will also need my old contacts from my own old phone(not iphone). I was wondering how I go about this?
This will be my first experience with iphones and so I know very little about them, however I am worried about itunes libraries. If I try to update my iphone software etc using itunes will I lose all my bosses contacts from the phone since I will obviously be using a new itunes library that is not his!
Sorry for the confusing nature of the this post. But any ideas, input or help will be greatly appreciately!You'll need to restore your phone from the latest backup you made before he synced his phone.
To check if there is still a backup you can use, do this:
Open iTunes Preferences:
Windows: Choose Edit > Preferences.
Mac: Choose iTunes > Preferences.
Click Devices (the iOS device doesn't need to be connected).
iTunes will show the phone number, IMEI, and serial number of the backed up iPhone when you position your mouse pointer over a backup (iTunes shows only the serial number for iPad and iPod touch). You can use this to find the backup you want to use.
Then restore from that backup by following this article:
iOS: Back up and restore your iOS device with iCloud or iTunes
Do the same with his device after that, using his old backup.
If you can't find one, set it up as new device without using any backup. -
Please help....
Armaguy wrote:
Hi, I'm having big troubles recently. I just updated to the latest software updates, but some of the symptoms were there before the update.
Never update a system that is not working correctly
Source of problem I think:
Not enough disk space - although I have been using the system with a lower disk space recently, I am now a 4GB free on a 500GB which is WAY below the recommended 15% free space at all time
You solved your own problem. You CANNOT run Leopard with that little HD room
Possible bad updates?
No. No room on HD is your only issue.
If you have a backup, get a new larger HD and restore to it.
Best backup is a bootable clone. Test it first.
TM is OK, but not as good as a clone for this problem. -
My script doesn't work, any ideas? Help please
This is my script:
import-module activedirectory
$computers = @(Get-ADComputer -Filter * -SearchBase 'OU=Desktop Machines,OU=Computers,OU=MyBusiness,DC=primrose,DC=office')
$result = @()
$computers | ForEach-Object { $result += (Get-WmiObject win32_networkadapterconfiguration -ComputerName $_.name | where ($_.ipenabled = 'true') | Select-Object systemname)}
$result | Export-Csv C:\users\samc\desktop\adapter-test.csv
$result | out-gridview
Thanks
SamSam, that second script I posted should do that for you. Use a select-object statement to limit the output to the properties you want to see.
Here is a list of property names, derived using the get-member cmdlet:
PSComputerName
ArpAlwaysSourceRoute
ArpUseEtherSNAP
Caption
DatabasePath
DeadGWDetectEnabled
DefaultIPGateway
DefaultTOS
DefaultTTL
Description
DHCPEnabled
DHCPLeaseExpires
DHCPLeaseObtained
DHCPServer
DNSDomain
DNSDomainSuffixSearchOrder
DNSEnabledForWINSResolution
DNSHostName
DNSServerSearchOrder
DomainDNSRegistrationEnabled
ForwardBufferMemory
FullDNSRegistrationEnabled
GatewayCostMetric
IGMPLevel
Index
InterfaceIndex
IPAddress
IPConnectionMetric
IPEnabled
IPFilterSecurityEnabled
IPPortSecurityEnabled
IPSecPermitIPProtocols
IPSecPermitTCPPorts
IPSecPermitUDPPorts
IPSubnet
IPUseZeroBroadcast
IPXAddress
IPXEnabled
IPXFrameType
IPXMediaType
IPXNetworkNumber
IPXVirtualNetNumber
KeepAliveInterval
KeepAliveTime
MACAddress
MTU
NumForwardPackets
PMTUBHDetectEnabled
PMTUDiscoveryEnabled
ServiceName
SettingID
TcpipNetbiosOptions
TcpMaxConnectRetransmissions
TcpMaxDataRetransmissions
TcpNumConnections
TcpUseRFC1122UrgentPointer
TcpWindowSize
WINSEnableLMHostsLookup
WINSHostLookupFile
WINSPrimaryServer
WINSScopeID
WINSSecondaryServer
__CLASS
__DERIVATION
__DYNASTY
__GENUS
__NAMESPACE
__PATH
__PROPERTY_COUNT
__RELPATH
__SERVER
__SUPERCLASS
Hope that helps! Jason -
Using auto detect proxy when I close web pages it goes back to manual proxy config help please
I was using the web o/k restarted my computer, tried to conect to the internet web page came up but would not turn over, said trouble with proxy. Looked in tool, options, advanced, setting. The box next to Manual proxy config was ticked. Changed to auto detect proxy clicked ok then ok. Next it had reverted back to manual proxy, is there a way to save this on auto proxy config as it is a pain having to change it all the time.
ThanksSee:
* http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
2 x Airport Extreme's or 1 Extreme + Express? Config Help Please!
Hello,
I have just purchased the MacBookPro Retina and want to reevaluate my WiFi setup.
My current configuration:
*Baement* > Cable Modem --> Airport Extreme [5th Gen] ---- Cat 5e ---> Switch GB ---> Netgear G AP > *study*
There are a few other Wireless G rated AP's around the house.
Do you think I should get another Airport Extreme for the study? or should I go for the new Airport Express - The Extreme is 3 Stream, can use 5GHz
I have a 120/mbit Cable Connection, so the Express throughput may be limited?
Can I use a second Extreme just as an AP?
Thanks guys,If you plan to connect a hard drive to the "new" AirPort that you will be adding, the AirPort Extreme will support a USB hard drive, the AirPort Express will not.
If you do have a 120 Mbps connection, then the AirPort Extreme would be the better choice as well since it has Gigabit Ethernet ports while the Express is limited to 100 Mbps.
While the Extreme does have 3 LAN ports and the Express 1, you could always add an Ethernet switch to either device if you need more connection points.
Finally, the AirPort Extreme has the better antenna package, so if your budget permits, another AirPort Extreme would be the logical choice for use as an access point.
Configure the Extreme to "create a wireless network" using the same wireless network name, same security settings and same password as the "main" AirPort Extreme and be sure to configure the "new" Extreme in Bridge Mode to work correctly on the network. -
Netgear rangemax & AEBS & AExpress Config - help please !
Hi
Here is my current set up. Just need to know whether I'm doing things right here !
I have a Netgear Rangemax wireless Modem/Router to which I have attempted to hook up the AEBS via the ethernet port to act as an extension to the wireless network. I have used Airport Admin utility to give the AEBS the same network name as the router and under the internet tab it is connecting using Airport (WDS) and has the also allow wireless clients box checked and is configured using DHCP. Under Network tab I have disabled the option to distribute IP addresses. Finally under WDS tab It is checked to enable use as a 'Remote base station' and to allo wireless clients.
Have I got this bit right ? The AEBS has the middle power light solid and the right and left lights flash together intermitently.
If this is correct. How do I configure the Airport express to further extend the network, as everything I have tried so far just leaves it with a solid orange light.
Thanks for taking the time to read this ! Really do appreciate any guru's knowledge !Configure your AirPort Express (AX) following the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.
-
Hi,
I have a telnet session running and the first thing it has asked is for me to change the default username and password.
The screen shows “ yourname# ". After this I have entered “ username <myuser> privilege 15 secret 0 <mypassword>”.
I then press enter and It comes back with invalid input detected at `^` marker, which is showing the first word i entered.
Am I entering this correctly.
Many Thanks
Dave.These products are being handled by the Cisco Small Business Support Community. (URL: https://supportforums.cisco.com/community/netpro/small-business)”
-
Ever since I updated to the IOS 6, I no longer can play my music in the car! It is plug and play! It just sits there saying connecting and nothing happens. A couple of my friends have said the same thing. Any ideas? Help please!
Hello ..do you have a history on the phone? did you get it wet? was it dropped? have you been using an authentic ORIGINAL apple charging cable?
this problem occurs when there is a short circuit in the phone... you most likely got it wet at some point and maybe didnt even realize it? The moisture in the phone hasb probablly oxidized one or several capacitors, integrated chips thereby short circuiting the phone. that is why he phone is acting erratic because these short circuits inadvertently "activates" other circuits.. eventually the phone will not turn on anymore- the heat will stress the citcuit board and you will have discontinuity along your main power lines and the phone will cease to function..i see this alllll the time in our shop
the fact you upgraded to ios6 will even work the phone harder because its a more powerful operating system taking full advantage of the A4 chip.. -
'Description' text missing for all my iTunes pages - any help please ?
I have Just noticed ( 11.10.2012 ) all the description text on all of my iTunes Pages is missing ! - no 'i' symbol, just to lines - - .
Any ideas or help please, nothing changed my end !
Kind regards,
Matthew JonesOn a similar note, any TV Shows that I have purchased from the iTunes store since 10.7.0.21 have no descriptions associated or embedded within the file downloads. I have to add them manually to my iTunes library, which is a bit annoying.
Any ideas?
Regards
Hans -
I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!
The pdf is loading as html code. If you save it, it will download as :
605124.pdf.html
Change the extension to .pdf
And it opens and works perfectly, I just tested it:
Use this link to download it automatically:
http://saladeaula.estacio.br/arquivo.asp?dir=00/1020624/605124.pdf&num_seq=59828 4
Maybe you are looking for
-
Photos are cropped after being shared from Photos App
So, I wanted to share Photos from my Photos App using iCloud shared albums. I have iCloud Photo Library enabled. All the photos I want to share are perfectly uploaded to iCloud, as I checked them on my iPhone. But when I created the shared album, som
-
7.20 SAP Web AS installation on (32 Bit, 2 GB) Windows OS
Hi ALL, I need 7.20 SAP Web AS installation on (32 Bit, 2 GB) Windows OS.(java Server) I am new to this Server Installation. This would be my first Server Installalation. Kindly share any installation guide available for 720 landscape installalation.
-
Hi All I am new to SAP R/3 and I have been given the lucky job of looking at R3 performance. However I have been on the ADM315 course but am still having a little difficulty finding my way around and what to look for. I was wondering if anyone has an
-
When I synk a particular collection ti LR Mobile the folder appears in the online library on lightroom.adobe.com and on the app om ny Ipad. but it is empty. when I check "all photos" the photos are there but when I check the catalouges, the one in qu
-
Eligible for AppleCare Protection Plan but can't purchase it?
I have an iPhone 5c that according to both the Apple warranty checker https://selfsolve.apple.com/agreementWarrantyDynamic.do and Apple Store Genius (at Lenox Square Mall in Buckhead Georgia, on 9/27/2014) is eligible for AppleCare Protection Plan (